Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model(DPM) by assuming the open channel flow to be closed condui...Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model(DPM) by assuming the open channel flow to be closed conduit flow under pressure and assuming zero shear stress at the top wall.This is known as the fixed lid model.By assuming the top wall to be a shear free wall,they have been able to show that the velocity distribution looks similar to that of an open channel flow with zero velocity at the bottom and maximum velocity at the top,representing the free water surface,but no information has been provided for the pressure at the free water surface.Because of this assumption,the validation of the model in predicting the trap efficiency has performed significantly poorly.In addition,the free water surface subject to zero gauge pressure cannot be modeled using the fixed lid model because there is no provision of extra space in the form of air space for the fluctuating part of the water surface profile.It can.however,be modeled using the volume of fluid(VOF) model because the VOF model is the appropriate model for open channel or free surface flow.Therefore,in the present study,three-dimensional(3D) computational fluid dynamics(CFD) modeling with the VOF model,which considers open channel flow with a free water surface,along with the stochastic DPM.was used to model the trap efficiency of an invert trap fitted in an open rectangular channel.The governing mathematical flow equations of the VOF model were solved using the ANSYS Fluent 14.0 software,reproducing the experimental conditions exactly.The results show that the 3D CFD predictions using the VOF model closely fit the experimental data for glass bead particles.展开更多
The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow ...The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.展开更多
基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改...基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改障碍物的位置,研究不同障碍物位置对溃坝水流的影响,不同障碍物位置所受到的压力。结果表明:VOF可以很好地模拟溃坝水流。对于下游有障碍物的溃坝模型,障碍物的最低点所受到的压力最大,最高点所受到的压力最小。障碍物位置距离溃坝水流越远,受到的压力越大,液面变化越剧烈,溃坝水流撞击障碍物行成的水舌高度越高,飞溅的水体也相应增加,水舌撞击右壁面的高度越大。展开更多
为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿...为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。展开更多
针对复杂管道系统内水流冲击滞留气团现象,采用VOF模型(Volume of Fluid Model)进行了数值模拟计算,并与一维模型进行了比较计算分析,结果表明:系统的最大压力并不总是气团的最大压力,有可能还会叠加水体对管壁的撞击而形成的突然升高...针对复杂管道系统内水流冲击滞留气团现象,采用VOF模型(Volume of Fluid Model)进行了数值模拟计算,并与一维模型进行了比较计算分析,结果表明:系统的最大压力并不总是气团的最大压力,有可能还会叠加水体对管壁的撞击而形成的突然升高压力。与实验实测结果的比较分析表明:采用VOF模型,能够较精细地仿真水流冲击滞留气团现象的气团形态、流场结构以及压力分布等的变化过程,其压力数值计算结果与实验实测基本吻合,其计算误差明显小于现有一维模型的计算误差,是深入研究该复杂瞬变流现象的有效方法。展开更多
基于流体体积函数法(volume of fluid,VOF)建立垂直平行平板通道内膜状冷凝传热预测数值模型,膜状冷凝传热传质过程模拟通过在VOF模型守恒方程中施加基于界面能量平衡方法的源项实现。通过数值分析研究发现,在壁面的顶部,冷凝液膜最薄,...基于流体体积函数法(volume of fluid,VOF)建立垂直平行平板通道内膜状冷凝传热预测数值模型,膜状冷凝传热传质过程模拟通过在VOF模型守恒方程中施加基于界面能量平衡方法的源项实现。通过数值分析研究发现,在壁面的顶部,冷凝液膜最薄,存在层流区域;冷凝液向下流动,一系列不规则的波纹随之出现;影响冷凝传热的主要因素是蒸汽的流速、液膜厚度及流动状态等。展开更多
文摘Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model(DPM) by assuming the open channel flow to be closed conduit flow under pressure and assuming zero shear stress at the top wall.This is known as the fixed lid model.By assuming the top wall to be a shear free wall,they have been able to show that the velocity distribution looks similar to that of an open channel flow with zero velocity at the bottom and maximum velocity at the top,representing the free water surface,but no information has been provided for the pressure at the free water surface.Because of this assumption,the validation of the model in predicting the trap efficiency has performed significantly poorly.In addition,the free water surface subject to zero gauge pressure cannot be modeled using the fixed lid model because there is no provision of extra space in the form of air space for the fluctuating part of the water surface profile.It can.however,be modeled using the volume of fluid(VOF) model because the VOF model is the appropriate model for open channel or free surface flow.Therefore,in the present study,three-dimensional(3D) computational fluid dynamics(CFD) modeling with the VOF model,which considers open channel flow with a free water surface,along with the stochastic DPM.was used to model the trap efficiency of an invert trap fitted in an open rectangular channel.The governing mathematical flow equations of the VOF model were solved using the ANSYS Fluent 14.0 software,reproducing the experimental conditions exactly.The results show that the 3D CFD predictions using the VOF model closely fit the experimental data for glass bead particles.
基金the National Natural Science Foundation of China(Nos.51974065 and 52274257)the Open Foundation of State Key Laboratory of Mineral Processing(No.BGRIMMKJSKL-2020-13)the Fundamental Research Funds for the Central Universities(Nos.N2201008 and N2201004).
文摘The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.
文摘基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改障碍物的位置,研究不同障碍物位置对溃坝水流的影响,不同障碍物位置所受到的压力。结果表明:VOF可以很好地模拟溃坝水流。对于下游有障碍物的溃坝模型,障碍物的最低点所受到的压力最大,最高点所受到的压力最小。障碍物位置距离溃坝水流越远,受到的压力越大,液面变化越剧烈,溃坝水流撞击障碍物行成的水舌高度越高,飞溅的水体也相应增加,水舌撞击右壁面的高度越大。
文摘为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。
文摘针对复杂管道系统内水流冲击滞留气团现象,采用VOF模型(Volume of Fluid Model)进行了数值模拟计算,并与一维模型进行了比较计算分析,结果表明:系统的最大压力并不总是气团的最大压力,有可能还会叠加水体对管壁的撞击而形成的突然升高压力。与实验实测结果的比较分析表明:采用VOF模型,能够较精细地仿真水流冲击滞留气团现象的气团形态、流场结构以及压力分布等的变化过程,其压力数值计算结果与实验实测基本吻合,其计算误差明显小于现有一维模型的计算误差,是深入研究该复杂瞬变流现象的有效方法。
文摘基于流体体积函数法(volume of fluid,VOF)建立垂直平行平板通道内膜状冷凝传热预测数值模型,膜状冷凝传热传质过程模拟通过在VOF模型守恒方程中施加基于界面能量平衡方法的源项实现。通过数值分析研究发现,在壁面的顶部,冷凝液膜最薄,存在层流区域;冷凝液向下流动,一系列不规则的波纹随之出现;影响冷凝传热的主要因素是蒸汽的流速、液膜厚度及流动状态等。
