Nanoscale air channel devices-inheritance and breakthrough of vacuum tube

The nanoscale air channel device(NACD)has recently gained significant attention as a novel vacuum electronic that can be fabricated through nanofabrication technologies.Here,the research and progress of the NACD since it was reviewed,with a focus on working mechanism analysis,nanofabrication technologies,device structure optimization,electrode materials and simulation approach.Furthermore,the application fields and future development of NACD were summarized and prospected.The NACDs are expected to surpass the physical limits of traditional solid transistors due to its advantages such as smaller heat loss,high-speed,resistance to harsh environments.

Neutrinos Described as Vacuum Energy Excitations Predict Observed Neutrino Mass Sum

Reliable observations find only three neutrino mass eigenstates, oscillating between each other as neutrinos travel through space, and limit the sum of the three neutrino masses. At a minimum, any reliable description of neutrinos must allow only three neutrino mass eigenstates and predict a neutrino mass sum consistent with observations. This paper describes neutrinos as spheres, with radius one quarter of their Compton wavelength and thickness of the Planck length, surrounding a central core along their rotation axis, with diameter of the Planck length. This description of neutrinos as excitations of the vacuum energy allows only three neutrino mass eigenstates and predicts a neutrino mass sum consistent with observations.

Residual stress analysis of 7075 aluminum alloy after vacuum electron beam welding

The residual stresses distribution of 7075 aluminum alloy in vacuum electron beam welding joint was numerically simulated using nonlinear finite element method. The result shows that the longitudinal residual stress is tension stress along weld center and the stress peak value appears in the middle of the welded seam; the transversal residual stress is compression stress ; the residual stress in thickness direction is very small.

Influence of spatiotemporal coupling on the capture-and-acceleration-scenario vacuum electron acceleration by ultrashort pulsed laser beam

This paper investigates the properties of the ultrashort pulsed beam aimed to the capture-and-acceleration-scenario （CAS） vacuum electron acceleration. The result shows that the spatiotemporal distribution of the phase velocity, the longitudinal component of the electric field and the acceleration quality factor are qualitatively similar to that of the continuous-wave Gaussian beam, and are slightly influenced by the spatiotemporal coupling of the ultrashort pulsed beam. When the pulse is compressed to an ultrashort one in which the pulse duration TFWHM 〈 5T0, the variation of the maximum net energy gain due to the carrier-envelope phase is a crucial disadvantage in the CAS acceleration process.

Infrared Spectroscopy of Neutral Clusters Based on a Vacuum Ultraviolet Free Electron Laseri

Spectroscopic characterization of clusters is crucial to understanding the structures and reaction mechanisms at the microscopic level,but it has been proven to be a grand challenge for neutral clusters because the absence of a charge makes it di伍cult for the size selection and detection.Infrared(IR)spectroscopy based on threshold photoionization using a tunable vacuum ultraviolet free electron laser(VUV-FEL)has recently been developed in the lab.The IR-VUV depletion and IR+VUV enhancement spectroscopic techniques open new avenues for size-selected IR spectroscopies of a large variety of neutral clusters without confinement(i.e.,an ultraviolet chromophore,a messenger tag,or a host matrix).The spectroscopic principles have been demonstrated by investigations of some neutral water clusters and some metal carbonyls.Here,the spectroscopic principles and their applications for neutral clusters are reviewed.

Vacuum electron beam brazing technology and finite element analysis on temperature field of capillary to plate joint

Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis model is built in this paper according to this special structure. And then ANSYS finite element analysis software is used to analyze brazing temperature field at different brazing parameters. The calculation results show that the temperature field of simulation has good agreement with that measured by experiment, which proves dependence of the model built in this paper. And also reference parameters could be provided for real brazing process through calculation in this model. Brazed joint of capiUary to plate with good performance is achieved using VEBB technology. The achievement of the study will be applied in aerocrafi in the future.

Preparation and characterization of PTFE coating in new polymer quartz piezoelectric crystal sensor for testing liquor products

A new method was developed based on the electron beam vacuum dispersion（EBVD） technology to prepare the PTFE polymer coating of the new polymer quartz piezoelectric crystal sensor for testing liquor products. The new method was applied in the new EBVD equipment which we designed. A real-time system monitoring the polymer coating＇s thickness was designed for the new EBVD equipment according to the quartz crystal microbalance（QCM） principle, playing an important role in preparing stable and uniform PTFE polymer coatings of the same thickness. 30 pieces of PTFE polymer coatings on the surface of the quartz crystal basis were prepared with the PTFE polymer ultrafine powder（purity ≥ 99.99%）as the starting material. We obtained 30 pieces of new PTFE polymer sensors. By using scanning electron microscopy（SEM）, the structure of the PTFE polymer coating＇s column clusters was studied. One sample from the 30 pieces of new PTFE polymer sensors was analysed by SEM in four scales, i.e., 400×, 1000×, 10000×, and 25000×. It was shown that under the condition of high bias voltage and low bias current, uniformly PTFE polymer coating could be achieved, which indicates that the new EBVD equipment is suitable for mass production of stable and uniform polymer coating.

Plasma simulation to analyze velocity distribution characteristics of pseudospark-sourced electron beam

Pseudospark-sourced electron beam is a promising candidate for driving vacuum electronic devices to generate millimeter wave and terahertz wave radiation as it has a very high combined beam current density. However, the inherent velocity spread of the beam, which is difficult to measure in experiment, has a great influence on the operating frequency and efficiency of the vacuum electronic device. In this paper, the velocity distribution characteristics of the electron beam produced by a single-gap hollow cathode electron gun are numerically studied and a three-dimensional kinetic plasma simulation model of a single-gap hollow cathode electron gun is built by using particle in cell and Monte Carlo collision methods in Vorpal. Based on the simulation model, the time-dependent evolution of the plasma formation inside the hollow cathode and electron beam generation process are observed. It is demonstrated that the pseudospark-sourced electron beam has a relatively large velocity spread. The time-dependent velocity distribution of the beam is analyzed, and the dependence of the beam velocity distribution under various operating conditions such as anode–cathode potential difference, gas pressure, and cathode aperture size are also studied.

Morphology and Field Emission of ZnO Nanomaterials at Different Positions

By simply adjusting the temperature and the number of materials, rod-like ZnO with different morphology, such as ZnO nanoneedles, were synthesized by a flexible thermal evaporation method. The ZnO nanorod array has the lowest turn-on field, the highest current density, and the highest emission efficiency due to its good contact with the substrate and relatively weak field shielding effect. Experiments show that the morphology and orientation of one-dimensional ZnO nanomaterials have a great influence on its conduction field and emission current density, and the nanoarrays also contribute to electron emission. The research results have a certain reference value for the application of ZnO nanorod arrays as cathode materials for field emission devices.