A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature （RT） and 650 ℃. The...A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature （RT） and 650 ℃. The results reveal that the TiA1N coating is compact, on which a small number of large particle and pits are present. The Ti/Al atomic ratio in the coating is about 0.94. The average hardness of the coating is 1 868 HV0.1 and the interface bonding force between TiAIN coating and the substrate is about 3 l N. The elastic modulus and the strength of the steel are improved by the deposition of TiAIN coating. The influence of the TiA1N coating on the tensile properties of the steel can be ignored at both RT and 650 ℃. Moreover, there is no obvious decrease of the fatigue limit of substrate when the steel is coated by the coating at the investigated temperature.展开更多
TiN,Ti1-xAIxN single layer coatings and TiN/Ti1-xAIxN multilayer coatings were deposited on SKH51 tool steel substrate by arc ion plating.The coatings were annealed in air to study the effect of aluminum and film stru...TiN,Ti1-xAIxN single layer coatings and TiN/Ti1-xAIxN multilayer coatings were deposited on SKH51 tool steel substrate by arc ion plating.The coatings were annealed in air to study the effect of aluminum and film structure on the oxidation performance.The surface morphology and structure were characterized by scanning electron microscopy and X-ray diffraction.The element distribution on the cross section was analyzed by electron probe microscopy.It is found that the oxidation resistance of these Ti1-xAlxN based coatings is mainly attributed to aluminum content in them.In comparison with the Ti1-xAlxN single layer coating,the TiN layer inserting into the Ti1-xAlxN in a multilayer coating increases the tendency of Ti diffusion toward the surface and forms a Ti-enriched top surface oxide layer,thus degrades the oxidation resistance.As far as the oxidation resistance is concerned in this study,Ti0.33Al0.67N single layer coating performs the best among all coatings.The kinetic of oxidation behavior of all coatings presents two definite stages.One is a slow oxidation growth which conforms to parabolic law,and the other presents severe mass gain with oxidation duration.The annealing time for severe oxidation initiation is responsible to Fe2O3formation in the oxide scale.展开更多
基金Funded by National Science Foundation of China(No.51172182)the Program for New Century Excellent Talents in University(No.NCET-08-0460)the 111 Project(No.B08040)
文摘A TiA1N coating was deposited on a heat resistant steel X12CrMoWVNbN10-1-1 by vacuum arc ion plating. The tensile and fatigue properties of the coated steel were investigated at room temperature （RT） and 650 ℃. The results reveal that the TiA1N coating is compact, on which a small number of large particle and pits are present. The Ti/Al atomic ratio in the coating is about 0.94. The average hardness of the coating is 1 868 HV0.1 and the interface bonding force between TiAIN coating and the substrate is about 3 l N. The elastic modulus and the strength of the steel are improved by the deposition of TiAIN coating. The influence of the TiA1N coating on the tensile properties of the steel can be ignored at both RT and 650 ℃. Moreover, there is no obvious decrease of the fatigue limit of substrate when the steel is coated by the coating at the investigated temperature.
基金the financial supports from the project of the Innovation Center of China(Grant No. 11C26214403099)the Science and Technology Project of Guangdong Province(Grant No.2010B090400172)
文摘TiN,Ti1-xAIxN single layer coatings and TiN/Ti1-xAIxN multilayer coatings were deposited on SKH51 tool steel substrate by arc ion plating.The coatings were annealed in air to study the effect of aluminum and film structure on the oxidation performance.The surface morphology and structure were characterized by scanning electron microscopy and X-ray diffraction.The element distribution on the cross section was analyzed by electron probe microscopy.It is found that the oxidation resistance of these Ti1-xAlxN based coatings is mainly attributed to aluminum content in them.In comparison with the Ti1-xAlxN single layer coating,the TiN layer inserting into the Ti1-xAlxN in a multilayer coating increases the tendency of Ti diffusion toward the surface and forms a Ti-enriched top surface oxide layer,thus degrades the oxidation resistance.As far as the oxidation resistance is concerned in this study,Ti0.33Al0.67N single layer coating performs the best among all coatings.The kinetic of oxidation behavior of all coatings presents two definite stages.One is a slow oxidation growth which conforms to parabolic law,and the other presents severe mass gain with oxidation duration.The annealing time for severe oxidation initiation is responsible to Fe2O3formation in the oxide scale.
