Method study and uncertainty analysis of calibration coefficients validation based on the Inner Mongolia test site

Calibration coefficients validation is the foundation for ascertaining the sensor performance and carrying out the quantitative application.Based on the analysis of the differences between the calibration and validation,two calibration coefficients validation methods were introduced in this paper.Taking the HJ-1A satellite CCD1 camera as an example,the uncertainties of calibration coefficients validation were analyzed.The calibration coefficients validation errors were simulated based on the measured data at an Inner Mongolia test site.The result showed that in the large view angle,the ground directional reflectance variation and the atmospheric path variation were the main error sources in calibration coefficients validation.The ground directional reflectance correction and atmospheric observation angle normalization should be carried out to improve the validation accuracy of calibration coefficients.

Development of slope mass rating system using K-means and fuzzy c-means clustering algorithms

Classification systems such as Slope Mass Rating(SMR) are currently being used to undertake slope stability analysis. In SMR classification system, data is allocated to certain classes based on linguistic and experience-based criteria. In order to eliminate linguistic criteria resulted from experience-based judgments and account for uncertainties in determining class boundaries developed by SMR system,the system classification results were corrected using two clustering algorithms, namely K-means and fuzzy c-means(FCM), for the ratings obtained via continuous and discrete functions. By applying clustering algorithms in SMR classification system, no in-advance experience-based judgment was made on the number of extracted classes in this system, and it was only after all steps of the clustering algorithms were accomplished that new classification scheme was proposed for SMR system under different failure modes based on the ratings obtained via continuous and discrete functions. The results of this study showed that, engineers can achieve more reliable and objective evaluations over slope stability by using SMR system based on the ratings calculated via continuous and discrete functions.

An Analysis and Validation Toolkit to Support the Undergraduate Course of Computer Organization and Architecture

As an important part of the computer organization and architecture(COA)course,the experiment teaching is generally about the computer system design.Students use the hardware description languages(HDLs)tools to implement the computer system on the Field Programmable Gate Array(FPGA)based platform.However,the HDLs tools are made for expert hardware engineers and the computer system is a very complex hardware project.It is hard for students to implement their computer system design in the limited lab hours.How to help students get the design validation and find the failure root is important in COA experiment teaching.To this end,an analysis and validation toolkit which is special for COA experiment teaching is designed.For two main steps of FPGA-based hardware design,waveform simulation and on-board testing,two packages were implemented for them respectively.The comparison results of using and not using our toolkit show it improves the effectiveness of experiment teaching greatly.

Static Frame Model Validation with Small Samples Solution Using Improved Kernel Density Estimation and Confidence Level Method

An improved method using kernel density estimation （KDE） and confidence level is presented for model validation with small samples. Decision making is a challenging problem because of input uncertainty and only small samples can be used due to the high costs of experimental measurements. However, model validation provides more confidence for decision makers when improving prediction accuracy at the same time. The confidence level method is introduced and the optimum sample variance is determined using a new method in kernel density estimation to increase the credibility of model validation. As a numerical example, the static frame model validation challenge problem presented by Sandia National Laboratories has been chosen. The optimum bandwidth is selected in kernel density estimation in order to build the probability model based on the calibration data. The model assessment is achieved using validation and accreditation experimental data respectively based on the probability model. Finally, the target structure prediction is performed using validated model, which are consistent with the results obtained by other researchers. The results demonstrate that the method using the improved confidence level and kernel density estimation is an effective approach to solve the model validation problem with small samples.

Stochastic model updating using distance discrimination analysis

This manuscript presents a stochastic model updating method, taking both uncertainties in models and variability in testing into account. The updated finite element（FE） models obtained through the proposed technique can aid in the analysis and design of structural systems. The authors developed a stochastic model updating method integrating distance discrimination analysis（DDA） and advanced Monte Carlo（MC） technique to（1） enable more efficient MC by using a response surface model,（2） calibrate parameters with an iterative test-analysis correlation based upon DDA, and（3） utilize and compare different distance functions as correlation metrics. Using DDA, the influence of distance functions on model updating results is analyzed. The proposed stochastic method makes it possible to obtain a precise model updating outcome with acceptable calculation cost. The stochastic method is demonstrated on a helicopter case study updated using both Euclidian and Mahalanobis distance metrics. It is observed that the selected distance function influences the iterative calibration process and thus, the calibration outcome, indicating that an integration of different metrics might yield improved results.

Evolved clustering analysis of 300 MW boiler furnace pressure sequence based on entropy characterization

The furnace process is very important in boiler operation,and furnace pressure works as an important parameter in furnace process.Therefore,there is a need to analyze and monitor the pressure signal in furnace.However,little work has been conducted on the relationship with the pressure sequence and boiler’s load under different working conditions.Since pressure sequence contains complex information,it demands feature extraction methods from multi-aspect consideration.In this paper,fuzzy c-means analysis method based on weighted validity index(VFCM)has been proposed for the working condition classification based on feature extraction.To deal with the fluctuating and time-varying pressure sequence,feature extraction is taken as nonlinear analysis based on entropy theory.Three kinds of entropy values,extracted from pressure sequence in time-frequency domain,are studied as the clustering objects for work condition classification.Weighted validity index,taking the close and separation degree into consideration,is calculated on the base of Silhouette index and Krzanowski-Lai index to obtain the optimal clustering number.Each time FCM runs,the weighted validity index evaluates the clustering result and the optimal clustering number will be obtained when it reaches the maximum value.Four datasets from UCI Machine Learning Repository are presented to certify the effectiveness in VFCM.Pressure sequences got from a 300 MW boiler are then taken for case study.The result of the pressure sequence case study with an error rate of 0.5332%shows the valuable information on boiler’s load and pressure sequence in furnace.The relationship between boiler’s load and entropy values extracted from pressure sequence is proposed.Moreover,the method can be considered to be a reference method for data mining in other fluctuating and time-varying sequences.