Aortic valve calcification disease (CAVD) is the most prevalent degenerative valve disease in humans, leading to significant morbidity and mortality. Despite its common occurrence, our understanding of the underlying ...Aortic valve calcification disease (CAVD) is the most prevalent degenerative valve disease in humans, leading to significant morbidity and mortality. Despite its common occurrence, our understanding of the underlying mechanisms remains incomplete, and available treatment options are limited and risky. A more comprehensive understanding of the biology of CAVD is essential to identify new therapeutic strategies. Animal models have played a crucial role in advancing our knowledge of CAVD and exploring potential treatments. However, these models have inherent limitations as they cannot fully replicate the complex physiological mechanisms of human CAVD. In this review, we examine various CAVD models ranging from pigs to mice, highlighting the unique characteristics of each model to enhance our understanding of CAVD. While these models offer valuable insights, they also have limitations and shortcomings. We propose that the guide wire model shows promise for future CAVD research, and streamlining the methodology could enhance our understanding and expand the research scope in this field.展开更多
The liquid-cooled battery energy sto rage system(LCBESS) has gained significant attention due to its superior thermal management capacity.However,liquid-cooled battery pack(LCBP) usually has a high sealing level above...The liquid-cooled battery energy sto rage system(LCBESS) has gained significant attention due to its superior thermal management capacity.However,liquid-cooled battery pack(LCBP) usually has a high sealing level above IP65,which can trap flammable and explosive gases from battery thermal runaway and cause explosions.This poses serious safety risks and challenges for LCBESS.In this study,we tested overcharged battery inside a commercial LCBP and found that the conventionally mechanical pressure relief valve(PRV) on the LCBP had a delayed response and low-pressure relief efficiency.A realistic 20-foot model of an energy storage cabin was constructed using the Flacs finite element simulation software.Comparative studies were conducted to evaluate the pressure relief efficiency and the influence on neighboring battery packs in case of internal explosions,considering different sizes and installation positions of the PRV.Here,a newly developed electric-controlled PRV integrated with battery fault detection is introduced,capable of starting within 50 ms of the battery safety valve opening.Furthermore,the PRV was integrated with the battery management system and changed the battery charging and discharging strategy after the PRV was opened.Experimental tests confirmed the efficacy of this method in preventing explosions.This paper addresses the safety concerns associated with LCBPs and proposes an effective solution for explosion relief.展开更多
Since the advent of transcatheter aortic valve replacement(TAVR)in 2002,it has now become the default interventional strategy for symptomatic patients presenting with severe aortic stenosis,particularly in intermediat...Since the advent of transcatheter aortic valve replacement(TAVR)in 2002,it has now become the default interventional strategy for symptomatic patients presenting with severe aortic stenosis,particularly in intermediate to highsurgical risk patients.In 2019,the United States Food and Drug Administration approved TAVR in low-risk patients based on two randomized trials.However,these breakthrough trials excluded patients with certain unfavorable anatomies and odd profiles.While currently there is no randomized study of TAVR in young patients,it may be preferred by the young population given the benefits of early discharge,shorter hospital stay,and expedite recovery.Nonetheless,it is important to ruminate various factors including lifetime expectancy,risk of pacemaker implantation,and the need for future valve or coronary interventions in young cohorts before considering TAVR in these patients.Furthermore,the data on long-term durability(>10 years)of TAVR is still unknown given most of the procedures were initially performed in the high or prohibitive surgical risk population.Thus,this editorial aims to highlight the importance of considering an individualized approach in young patients with consideration of various factors including lifetime expectancy while choosing TAVR against surgical aortic valve replacement.展开更多
This study explores the implementation of computed tomography(CT)reconstruction and simulation techniques for patient-specific valves,aiming to dissect the mechanical attributes of calcified valves within transcathete...This study explores the implementation of computed tomography(CT)reconstruction and simulation techniques for patient-specific valves,aiming to dissect the mechanical attributes of calcified valves within transcatheter heart valve replacement(TAVR)procedures.In order to facilitate this exploration,it derives pertinent formulas for 3D multi-material isogeometric hyperelastic analysis based on Hounsfield unit(HU)values,thereby unlocking foundational capabilities for isogeometric analysis in calcified aortic valves.A series of uniaxial and biaxial tensile tests is executed to obtain an accurate constitutive model for calcified active valves.To mitigate discretization errors,methodologies for reconstructing volumetric parametric models,integrating both geometric and material attributes,are introduced.Applying these analytical formulas,constitutive models,and precise analytical models to isogeometric analyses of calcified valves,the research ascertains their close alignment with experimental results through the close fit in displacement-stress curves,compellingly validating the accuracy and reliability of the method.This study presents a step-by-step approach to analyzing themechanical characteristics of patient-specific valves obtained fromCT images,holding significant clinical implications and assisting in the selection of treatment strategies and surgical intervention approaches in TAVR procedures.展开更多
Background: Tuberculous endocarditis is a rare but serious complication of heart valve replacement surgery. We report the case of a 24-year-old patient, who presented with tuberculous endocarditis after mechanical mit...Background: Tuberculous endocarditis is a rare but serious complication of heart valve replacement surgery. We report the case of a 24-year-old patient, who presented with tuberculous endocarditis after mechanical mitral valve replacement, with a favorable clinical course following anti-tuberculosis treatment. Case Presentation: We report a 24-year-old male patient, admitted to the cardiac surgery department of the Fann Hospital (Dakar, Senegal), for the management of severe mixed (rheumatic and endocarditic) mitral insufficiency with associated tricuspid insufficiency. He had a history of recurrent angina and polyarthralgia in childhood, was hospitalized several times for refractory global cardiac decompensation, and for a suspected infective endocarditis a month before his admission. On admission, the clinical examination revealed signs suggestive of mitral and tricuspid insufficiency. Transthoracic echocardiography revealed severe post-endocarditic mitral insufficiency with A3 amputation, highly mobile 15 mm vegetations on the free edge of the large valve, moderate tricuspid insufficiency, and severe pulmonary artery hypertension. Mechanical mitral valve replacement and tricuspid valve annuloplasty using autologous pericardial strip were performed via median sternotomy. After ten days, the patient presented with global cardiac decompensation associated with a clinico-biological infectious syndrome, and tans-oesophageal echography revealed an abscess at the sinotubular junction, communicating with the aorta. A thoraco-abdomino-pelvic CT scan was done, which revealed a bilateral alveolar-interstitial syndrome with mediastinal lymphadenopathy. Anti-tuberculosis treatment with RHZE was initiated for 06 months. The clinical course was favorable. Conclusion: Tuberculous endocarditis in prostheses is a serious complication of heart valve replacement surgery, which may evolve favorably under medical treatment.展开更多
Purpose–The type 120 emergency valve is an essential braking component of railway freight trains,butcorresponding diaphragms consisting of natural rubber(NR)and chloroprene rubber(CR)exhibit insufficientaging resista...Purpose–The type 120 emergency valve is an essential braking component of railway freight trains,butcorresponding diaphragms consisting of natural rubber(NR)and chloroprene rubber(CR)exhibit insufficientaging resistance and low-temperature resistance,respectively.In order to develop type 120 emergency valverubber diaphragms with long-life and high-performance,low-temperatureresistant CR and NR were processed.Design/methodology/approach–The physical properties of the low-temperature-resistant CR and NRwere tested by low-temperature stretching,dynamic mechanical analysis,differential scanning calorimetryand thermogravimetric analysis.Single-valve and single-vehicle tests of type 120 emergency valves werecarried out for emergency diaphragms consisting of NR and CR.Findings–The low-temperature-resistant CR and NR exhibited excellent physical properties.The elasticityand low-temperature resistance of NR were superior to those of CR,whereas the mechanical properties of thetwo rubbers were similar in the temperature range of 0℃–150℃.The NR and CR emergency diaphragms metthe requirements of the single-valve test.In the low-temperature single-vehicle test,only the low-temperaturesensitivity test of the NR emergency diaphragm met the requirements.Originality/value–The innovation of this study is that it provides valuable data and experience for futuredevelopment of type 120 valve rubber diaphragms.展开更多
Transcatheter aortic valve replacement(TAVR)has emerged as a formidable treatment option for severe symptomatic aortic stenosis ahead of surgical aortic valve replacement.The encouraging results from large randomized ...Transcatheter aortic valve replacement(TAVR)has emerged as a formidable treatment option for severe symptomatic aortic stenosis ahead of surgical aortic valve replacement.The encouraging results from large randomized controlled trials has resulted in an exponential rise in the use of TAVR even in the low-risk patients.However,this is not without challenges.Need for permanent pacemaker(PPM)post-TAVR remains the most frequent and clinically relevant challenge.Naturally,identifying risk factors which predispose an individual to develop high grade conduction block post-TAVR is important.Various demographic factors,electrocardiographic features,anatomic factors and procedural characteristics have all been linked to the development of advanced conduction block and need for PPM following TAVR.Amongst these electrophysiological variables,most notably a prolonged QRS>120 ms regardless of the type of conduction block seems to be one of the strongest predictors on logistic regression models.The index study by Nwaedozie et al highlights that patients requiring PPM post-TAVR had higher odds of having a baseline QRS>120 ms and were more likely to be having diabetes mellitus that those who did not require PPM.展开更多
In this editorial,we comprehensively summarized the preoperative risk factors of early permanent pacemaker implantation after transcatheter aortic valve replacement(TAVR)among patients with severe aortic stenosis from...In this editorial,we comprehensively summarized the preoperative risk factors of early permanent pacemaker implantation after transcatheter aortic valve replacement(TAVR)among patients with severe aortic stenosis from several renowned clinical studies and focused on the primary prevention of managing the modifiable factors,e.g.,paroxysmal atrial fibrillation before the TAVR.展开更多
Several anatomical,demographic,clinical,electrocardiographic,procedural,and valve-related variables can be used to predict the probability of developing con-duction abnormalities after transcatheter aortic valve repla...Several anatomical,demographic,clinical,electrocardiographic,procedural,and valve-related variables can be used to predict the probability of developing con-duction abnormalities after transcatheter aortic valve replacement(TAVR)that necessitate permanent pacemaker(PPM)implantation.These variables include calcifications around the device landing zone and in the mitral annulus;pre-existing electrocardiographic abnormalities such as left and right bundle branch blocks(BBB),first-and second-degree atrioventricular blocks,as well as bifas-cicular and trifascicular blocks;male sex;diabetes mellitus(DM);hypertension;history of atrial fibrillation;renal failure;dementia;and use of self-expanding valves.The current study supports existing literature by demonstrating that type 2 DM and baseline right BBB are significant predictors of PPM implantation post-TAVR.Regardless of the side of the BBB,this study demonstrated,for the first time,a linear association between the incidence of PPM implantation post-TAVR and every 20 ms increase in baseline QRS duration(above 100 ms).After a 1-year follow-up,patients who received PPM post-TAVR had a higher rate of hospital-ization for heart failure and nonfatal myocardial infarction.展开更多
The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the ...The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the TR hazard severity of LIBs,are not known.In this paper,the TR and gas venting behavior of three 100 A h lithium iron phosphate(LFP)batteries with different safety valves are investigated under overheating.Compared to previous studies,the main contribution of this work is in studying and evaluating the effect of gas venting behavior and TR hazard severity of LFP batteries with three safety valve types.Two significant results are obtained:(Ⅰ)the safety valve type dominates over gas venting pressure of battery during safety venting,the maximum gas venting pressure of LFP batteries with a round safety valve is 3320 Pa,which is one order of magnitude higher than other batteries with oval or cavity safety valve;(Ⅱ)the LFP battery with oval safety valve has the lowest TR hazard as shown by the TR hazard assessment model based on gray-fuzzy analytic hierarchy process.This study reveals the effect of safety valve type on TR and gas venting,providing a clear direction for the safety valve design.展开更多
The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intend...The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intends to study the static characteristic of DRDNFV through the AMESet and AMESim simulation.It is explored under the circumstance of the fixed orifices being clogged and experimentally verified on the test bench.The results show that the pressure gain increases and the flow gain decreases with the increasing clogged degree of the fixed orifices on both sides.The zero bias increases synchronously with the increasing clogged degree of the unilateral fixed orifice.The experimental results are basically consistent with the theoretical curves and the theoretical correctness of the simulation model is effectively verified.The results can provide the theoretical reference for design,debugging,maintenance and fault diagnosis of DRDNFV.展开更多
Pacemaker post-transcatheter aortic valve replacement is related to multifactorial risk.Nwaedozie et al brought to the body of evidence electrocardiogram and clinical findings.However,procedural characteristics have a...Pacemaker post-transcatheter aortic valve replacement is related to multifactorial risk.Nwaedozie et al brought to the body of evidence electrocardiogram and clinical findings.However,procedural characteristics have at least as much impact on the final need for a permanent pacemaker and potentially on the pacing rate.In this regard,long-term follow-up and understanding of the impact of long-term stimulation is of utmost importance.展开更多
HACEK organisms represent a rare but important group of causative pathogens in endocarditis. These bacteria have historically been associated with culture-negative endocarditis;however, modern laboratory techniques ha...HACEK organisms represent a rare but important group of causative pathogens in endocarditis. These bacteria have historically been associated with culture-negative endocarditis;however, modern laboratory techniques have made this less common. In this case, we present a 74-year-old man who presented with acute onset altered mentation, fever, and sepsis. He was ultimately found to have Haemophilus influenzae meningitis, cerebral empyema, aortic valve endocarditis, psoas myositis, and L2 - L3 diskitis with osteomyelitis. Although HACEK organisms are commonly found in the oropharynx and upper respiratory tract in humans, our patient did not report recent preceding dental or ENT procedures. H. influenzae is responsible for approximately 0.16% of all cases of bacterial endocarditis, representing a very limited subset. Although generally considered low virulent pathogens, this case demonstrates the unusual extent of infection from a HACEK organism, H. influenzae, causing aortic valve endocarditis as well as atypical non-cardiac sequelae, including acute meningitis.展开更多
Introduction: Treatments for cardiovascular diseases have increasingly evolved with the tendency to offer minimally invasive or transcatheter procedures instead of conventional sternotomy surgery. In this context, we ...Introduction: Treatments for cardiovascular diseases have increasingly evolved with the tendency to offer minimally invasive or transcatheter procedures instead of conventional sternotomy surgery. In this context, we highlight minimally invasive mitral valve surgery (MIMVS), which has been shown to be an increasingly solid option with some superior results when compared to the conventional technique: better pain control, shorter hospital stays, shorter recovery time, shorter readmission rate in the first postoperative year, better aesthetic results, and lower overall cost. Aim: This study aims to evaluate the stages of MIMVS, by primary mitral valve consultation, in our service and compare these results with data from the literature. Methods: All electronic medical records of patients who underwent MIMVS for primary mitral valve injury in the Encore Hospital from January 2020 to February 2023 were analyzed. Tabulation and statistical analysis were performed using the Microsoft Excel<sup>®</sup> program. Quantitative variables were presented as means, standard deviations. Results: 46 patients were enrolled in our study (Age: 59.1 ± 12.4 years old;60.8% Female, BMI: 26 ± 4.4 Kg/m<sup>2</sup>, Low risk STS score: 82.6%). The observed 30-day mortality was 2.1%, plastic rate of 23.9%, blood transfusion rate of 41.3%, length of stay in an intensive care bed (ICB) of 3.3 ± 3.3 days and hospital stay of 6.4 ± 5.1 days. Conclusions: We noticed that the MIMVS results carried out in our service agree with data from national and international literature with approximately 1.3 days more hospitalization in ICB.展开更多
The mathematical model of the solenoid valve under varying temperatures is constructed to investigate its performance and enhance heat dissipation balance.The relationship between temperature and electromagnetic force...The mathematical model of the solenoid valve under varying temperatures is constructed to investigate its performance and enhance heat dissipation balance.The relationship between temperature and electromagnetic force is determined.Electrothermal coupling simulation using COMSOL is conducted,optimizing the outer diameter and length structure parameters of the coil.It is established that the heat dissipation of the coil is influenced by its outer diameter.Subsequently,based on optimized coil structure parameters,an orthogonal experimental design method combined with Ansys Maxwell is employed for simulation solution analysis to study the impact of structural parameters such as length,position,front and rear angles of the magnetic barrier ring in the iron core,armature length,and through-hole size on electromagnetic force.Optimal structural parameters are identified.Results indicate a decrease in steady-state electromagnet temperature by 3-4℃,an increase in the initial electromagnetic force by 32.63%,and a rise in the maximum electromagnetic force by 27.10%.展开更多
The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveles...The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveless air-breathing pulsed detonation engine with a supersonic internal compression inlet is investigated.Based on an ideal thermal cycle,the ideal equivalent pressure ratios(pcb)of the Pulsed Detonation Combustor(PDC)are obtained theoretically which are directly related with the propulsive performance of the engine.By introducing an orifice loss model into the cycles,the critical pressure drop ratios through the orifice for the PDC achieving pressure gain and the engine achieving thrust gain are studied.More influencing factors are investigated by the use of a one-dimensional(1-D)numerical simulation model.The operating characteristics of the pulse detonation engine are investigated with changes of the valve type,the inlet/outlet area ratio of the PDC,the nozzle area ratio,and flight conditions.All these factors can affect pcbof the PDC,and pcbcan be optimized by changing the geometry of the engine.The most important influence parameter is the valve type.When using an orifice-type aerodynamic valve,simulation results show that the PDC cannot achieve the pressure gain characteristics.When a supersonic internal compression inlet is introduced to the engine,whether the Pulse Detonation Engine(PDE)can achieve thrust gain comparable with that of an ideal Brayton cycle engine not only is related to the pressure gain of the combustor,but also needs to optimize the engine structure to reduce the total pressure loss.展开更多
BACKGROUND Conduction and rhythm abnormalities requiring permanent pacemakers(PPM)are short-term complications following transcatheter aortic valve replacement(TAVR),and their clinical outcomes remain conflicting.Pote...BACKGROUND Conduction and rhythm abnormalities requiring permanent pacemakers(PPM)are short-term complications following transcatheter aortic valve replacement(TAVR),and their clinical outcomes remain conflicting.Potential novel predictors of post-TAVR PPM,like QRS duration,QTc prolongation,and supraventricular arrhythmias,have been poorly studied.AIM To evaluate the effects of baseline nonspecific interventricular conduction delay and supraventricular arrhythmia on post-TAVR PPM requirement and determine the impact of PPM implantation on clinical outcomes.METHODS RESULTS Out of the 357 patients that met inclusion criteria,the mean age was 80 years,188(52.7%)were male,and 57(16%)had a PPM implantation.Baseline demographics,valve type,and cardiovascular risk factors were similar except for type II diabetes mellitus(DM),which was more prevalent in the PPM cohort(59.6%vs 40.7%;P=0.009).The PPM cohort had a significantly higher rate of pre-procedure right bundle branch block,prolonged QRS>120 ms,prolonged QTc>470 ms,and supraventricular arrhythmias.There was a consistently significant increase in the odds ratio(OR)of PPM implantation for every 20 ms increase in the QRS duration above 100 ms:QRS 101-120[OR:2.44;confidence intervals(CI):1.14-5.25;P=0.022],QRS 121-140(OR:3.25;CI:1.32-7.98;P=0.010),QRS 141-160(OR:6.98;CI:3.10-15.61;P<0.001).After model adjustment for baseline risk factors,the OR remained significant for type II DM(aOR:2.16;CI:1.18-3.94;P=0.012),QRS>120(aOR:2.18;CI:1.02-4.66;P=0.045)and marginally significant for supraventricular arrhythmias(aOR:1.82;CI:0.97-3.42;P=0.062).The PPM cohort had a higher adjusted OR of heart failure(HF)hospitalization(aOR:2.2;CI:1.1-4.3;P=0.022)and nonfatal myocardial infarction(MI)(aOR:3.9;CI:1.1-14;P=0.031)without any difference in mortality(aOR:1.1;CI:0.5-2.7;P=0.796)at one year.CONCLUSION Pre-TAVR type II DM and QRS duration>120,regardless of the presence of bundle branch blocks,are predictors of post-TAVR PPM.At 1-year post-TAVR,patients with PPM have higher odds of HF hospitalization and MI.展开更多
It has been hypothesized that leaflet substrates with a trilayer structure and anisotropicmechanical properties could be useful for the production of functional and long-lasting tissue-engineered leaflets.To investiga...It has been hypothesized that leaflet substrates with a trilayer structure and anisotropicmechanical properties could be useful for the production of functional and long-lasting tissue-engineered leaflets.To investigate the influence of the anisotropic structural and mechanical characteristics of a substrate on cells,in this study,we electrospun trilayer anisotropic fibrous substrates and randomly oriented isotropic fibrous substrates(used as controls)from polycaprolactone polymers.Consequently,the random substrates had higher radial and lower circumferential tensile properties than the trilayer substrates;however,they had similar flexural properties.Porcine valvular interstitial cells cultured on both substrates produced random and trilayer cell-cultured constructs,respectively.The trilayer cell-cultured constructs had more anisotropic mechanical properties,17%higher cellular proliferation,14%more extracellular matrix(i.e.,collagen and glycosaminoglycan)production,and superior gene and protein expression,suggesting that more cells were in a growth state in the trilayer constructs than in the random constructs.Furthermore,the random and radial layers of the trilayer constructs had more vimentin,collagen,transforming growth factor-beta 1(TGF-ß1),transforming growth factor-beta 3(TGF-ß3)gene expression than in the circumferential layer of the constructs.This study verifies that the differences in structural,tensile,and anisotropic properties of the trilayer and random substrates influence the characteristics of the cells and ECM in the constructs.展开更多
The paper discusses minimizing the effect of external mechanical vibration on hydraulic valves in different military hydraulic drive systems.The current research work presents an analysis of the potential to reduce vi...The paper discusses minimizing the effect of external mechanical vibration on hydraulic valves in different military hydraulic drive systems.The current research work presents an analysis of the potential to reduce vibration on the valve casing by installing a valve flexibly on a vibrating surface,i.e.,by introducing a material with known stiffness and damping characteristics between the valve casing and the vibrating surface-a steel spring package or special cushions made of elastomer material or of oilresistant rubber.The article also demonstrates that elastomer cushions placed inside the valve casingbetween the casing and the centering springs-can be used as a supplementary or alternative solution in the analyzed method for mitigating the transfer of vibrations.By using materials with appropriately selected elastic and dissipative properties,the effectiveness of vibro-isolation can be increased.The presented theoretical analyzes by linear and non-linear mathematical models have been verified experimentally.展开更多
This paper reviews the development of valve- less piezoelectric pump with cone-shaped tube chrono- logically, which have widely potential application in biomedicine and micro-electro-mechanical systems because of its ...This paper reviews the development of valve- less piezoelectric pump with cone-shaped tube chrono- logically, which have widely potential application in biomedicine and micro-electro-mechanical systems because of its novel principles and deduces the research direction in the future. Firstly, the history of valveless piezoelectric pumps with cone-shaped tubes is reviewed and these pumps are classified into the following types: single pump with solid structure or plane structure, and combined pump with parallel structure or series structure. Furthermore, the function of each type of cone-shaped tubes and pump structures are analyzed, and new direc- tions of potential expansion of valveless piezoelectric pumps with cone-shaped tubes are summarized and deduced. The historical argument, which is provided by the literatures, that for a valveless piezoelectric pump with cone-shaped tubes, cone angle determines the flow resistance and the flow resistance determines the flow direction. The argument is discussed in the reviewed pumps one by one, and proved to be convincing. Finally, it is deduced that bionics is pivotal in the development of valveless piezoelectric pump with cone-shaped tubes fromthe perspective of evolution of biological structure. This paper summarizes the current valveless piezoelectric pumps with cone-shaped tubes and points out the future development, which may provide guidance for the research of piezoelectric actuators.展开更多
文摘Aortic valve calcification disease (CAVD) is the most prevalent degenerative valve disease in humans, leading to significant morbidity and mortality. Despite its common occurrence, our understanding of the underlying mechanisms remains incomplete, and available treatment options are limited and risky. A more comprehensive understanding of the biology of CAVD is essential to identify new therapeutic strategies. Animal models have played a crucial role in advancing our knowledge of CAVD and exploring potential treatments. However, these models have inherent limitations as they cannot fully replicate the complex physiological mechanisms of human CAVD. In this review, we examine various CAVD models ranging from pigs to mice, highlighting the unique characteristics of each model to enhance our understanding of CAVD. While these models offer valuable insights, they also have limitations and shortcomings. We propose that the guide wire model shows promise for future CAVD research, and streamlining the methodology could enhance our understanding and expand the research scope in this field.
基金sponsored by the Science and Technology Program of State Grid Corporation of China(4000-202355090A-1-1ZN)。
文摘The liquid-cooled battery energy sto rage system(LCBESS) has gained significant attention due to its superior thermal management capacity.However,liquid-cooled battery pack(LCBP) usually has a high sealing level above IP65,which can trap flammable and explosive gases from battery thermal runaway and cause explosions.This poses serious safety risks and challenges for LCBESS.In this study,we tested overcharged battery inside a commercial LCBP and found that the conventionally mechanical pressure relief valve(PRV) on the LCBP had a delayed response and low-pressure relief efficiency.A realistic 20-foot model of an energy storage cabin was constructed using the Flacs finite element simulation software.Comparative studies were conducted to evaluate the pressure relief efficiency and the influence on neighboring battery packs in case of internal explosions,considering different sizes and installation positions of the PRV.Here,a newly developed electric-controlled PRV integrated with battery fault detection is introduced,capable of starting within 50 ms of the battery safety valve opening.Furthermore,the PRV was integrated with the battery management system and changed the battery charging and discharging strategy after the PRV was opened.Experimental tests confirmed the efficacy of this method in preventing explosions.This paper addresses the safety concerns associated with LCBPs and proposes an effective solution for explosion relief.
文摘Since the advent of transcatheter aortic valve replacement(TAVR)in 2002,it has now become the default interventional strategy for symptomatic patients presenting with severe aortic stenosis,particularly in intermediate to highsurgical risk patients.In 2019,the United States Food and Drug Administration approved TAVR in low-risk patients based on two randomized trials.However,these breakthrough trials excluded patients with certain unfavorable anatomies and odd profiles.While currently there is no randomized study of TAVR in young patients,it may be preferred by the young population given the benefits of early discharge,shorter hospital stay,and expedite recovery.Nonetheless,it is important to ruminate various factors including lifetime expectancy,risk of pacemaker implantation,and the need for future valve or coronary interventions in young cohorts before considering TAVR in these patients.Furthermore,the data on long-term durability(>10 years)of TAVR is still unknown given most of the procedures were initially performed in the high or prohibitive surgical risk population.Thus,this editorial aims to highlight the importance of considering an individualized approach in young patients with consideration of various factors including lifetime expectancy while choosing TAVR against surgical aortic valve replacement.
基金supported by the Natural Science Foundation of China(Project Nos.52075340 and 61972011)the Shanghai Special Research Project on Aging Population and Maternal and Child Health(Project No.2020YJZX0106).
文摘This study explores the implementation of computed tomography(CT)reconstruction and simulation techniques for patient-specific valves,aiming to dissect the mechanical attributes of calcified valves within transcatheter heart valve replacement(TAVR)procedures.In order to facilitate this exploration,it derives pertinent formulas for 3D multi-material isogeometric hyperelastic analysis based on Hounsfield unit(HU)values,thereby unlocking foundational capabilities for isogeometric analysis in calcified aortic valves.A series of uniaxial and biaxial tensile tests is executed to obtain an accurate constitutive model for calcified active valves.To mitigate discretization errors,methodologies for reconstructing volumetric parametric models,integrating both geometric and material attributes,are introduced.Applying these analytical formulas,constitutive models,and precise analytical models to isogeometric analyses of calcified valves,the research ascertains their close alignment with experimental results through the close fit in displacement-stress curves,compellingly validating the accuracy and reliability of the method.This study presents a step-by-step approach to analyzing themechanical characteristics of patient-specific valves obtained fromCT images,holding significant clinical implications and assisting in the selection of treatment strategies and surgical intervention approaches in TAVR procedures.
文摘Background: Tuberculous endocarditis is a rare but serious complication of heart valve replacement surgery. We report the case of a 24-year-old patient, who presented with tuberculous endocarditis after mechanical mitral valve replacement, with a favorable clinical course following anti-tuberculosis treatment. Case Presentation: We report a 24-year-old male patient, admitted to the cardiac surgery department of the Fann Hospital (Dakar, Senegal), for the management of severe mixed (rheumatic and endocarditic) mitral insufficiency with associated tricuspid insufficiency. He had a history of recurrent angina and polyarthralgia in childhood, was hospitalized several times for refractory global cardiac decompensation, and for a suspected infective endocarditis a month before his admission. On admission, the clinical examination revealed signs suggestive of mitral and tricuspid insufficiency. Transthoracic echocardiography revealed severe post-endocarditic mitral insufficiency with A3 amputation, highly mobile 15 mm vegetations on the free edge of the large valve, moderate tricuspid insufficiency, and severe pulmonary artery hypertension. Mechanical mitral valve replacement and tricuspid valve annuloplasty using autologous pericardial strip were performed via median sternotomy. After ten days, the patient presented with global cardiac decompensation associated with a clinico-biological infectious syndrome, and tans-oesophageal echography revealed an abscess at the sinotubular junction, communicating with the aorta. A thoraco-abdomino-pelvic CT scan was done, which revealed a bilateral alveolar-interstitial syndrome with mediastinal lymphadenopathy. Anti-tuberculosis treatment with RHZE was initiated for 06 months. The clinical course was favorable. Conclusion: Tuberculous endocarditis in prostheses is a serious complication of heart valve replacement surgery, which may evolve favorably under medical treatment.
基金funded by the Science and Technology Research and Development Plan of the China State Railway Group Company Limited(No.N2023J053).
文摘Purpose–The type 120 emergency valve is an essential braking component of railway freight trains,butcorresponding diaphragms consisting of natural rubber(NR)and chloroprene rubber(CR)exhibit insufficientaging resistance and low-temperature resistance,respectively.In order to develop type 120 emergency valverubber diaphragms with long-life and high-performance,low-temperatureresistant CR and NR were processed.Design/methodology/approach–The physical properties of the low-temperature-resistant CR and NRwere tested by low-temperature stretching,dynamic mechanical analysis,differential scanning calorimetryand thermogravimetric analysis.Single-valve and single-vehicle tests of type 120 emergency valves werecarried out for emergency diaphragms consisting of NR and CR.Findings–The low-temperature-resistant CR and NR exhibited excellent physical properties.The elasticityand low-temperature resistance of NR were superior to those of CR,whereas the mechanical properties of thetwo rubbers were similar in the temperature range of 0℃–150℃.The NR and CR emergency diaphragms metthe requirements of the single-valve test.In the low-temperature single-vehicle test,only the low-temperaturesensitivity test of the NR emergency diaphragm met the requirements.Originality/value–The innovation of this study is that it provides valuable data and experience for futuredevelopment of type 120 valve rubber diaphragms.
文摘Transcatheter aortic valve replacement(TAVR)has emerged as a formidable treatment option for severe symptomatic aortic stenosis ahead of surgical aortic valve replacement.The encouraging results from large randomized controlled trials has resulted in an exponential rise in the use of TAVR even in the low-risk patients.However,this is not without challenges.Need for permanent pacemaker(PPM)post-TAVR remains the most frequent and clinically relevant challenge.Naturally,identifying risk factors which predispose an individual to develop high grade conduction block post-TAVR is important.Various demographic factors,electrocardiographic features,anatomic factors and procedural characteristics have all been linked to the development of advanced conduction block and need for PPM following TAVR.Amongst these electrophysiological variables,most notably a prolonged QRS>120 ms regardless of the type of conduction block seems to be one of the strongest predictors on logistic regression models.The index study by Nwaedozie et al highlights that patients requiring PPM post-TAVR had higher odds of having a baseline QRS>120 ms and were more likely to be having diabetes mellitus that those who did not require PPM.
文摘In this editorial,we comprehensively summarized the preoperative risk factors of early permanent pacemaker implantation after transcatheter aortic valve replacement(TAVR)among patients with severe aortic stenosis from several renowned clinical studies and focused on the primary prevention of managing the modifiable factors,e.g.,paroxysmal atrial fibrillation before the TAVR.
文摘Several anatomical,demographic,clinical,electrocardiographic,procedural,and valve-related variables can be used to predict the probability of developing con-duction abnormalities after transcatheter aortic valve replacement(TAVR)that necessitate permanent pacemaker(PPM)implantation.These variables include calcifications around the device landing zone and in the mitral annulus;pre-existing electrocardiographic abnormalities such as left and right bundle branch blocks(BBB),first-and second-degree atrioventricular blocks,as well as bifas-cicular and trifascicular blocks;male sex;diabetes mellitus(DM);hypertension;history of atrial fibrillation;renal failure;dementia;and use of self-expanding valves.The current study supports existing literature by demonstrating that type 2 DM and baseline right BBB are significant predictors of PPM implantation post-TAVR.Regardless of the side of the BBB,this study demonstrated,for the first time,a linear association between the incidence of PPM implantation post-TAVR and every 20 ms increase in baseline QRS duration(above 100 ms).After a 1-year follow-up,patients who received PPM post-TAVR had a higher rate of hospital-ization for heart failure and nonfatal myocardial infarction.
基金supported by the National Key R&D Program of China(No.2021YFB2402001)the Postgraduate Innovation and Entrepreneurship Practice Project of Anhui Province(No.2022cxcysj013)+2 种基金the China Postdoctoral Science Foundation(No.2022T150615)the Fundamental Research Funds for the Central Universities(No.WK5290000002)supported by Youth Innovation Promotion Association CAS(No.Y201768)。
文摘The safety valve is an important component to ensure the safe operation of lithium-ion batteries(LIBs).However,the effect of safety valve type on the thermal runaway(TR)and gas venting behavior of LIBs,as well as the TR hazard severity of LIBs,are not known.In this paper,the TR and gas venting behavior of three 100 A h lithium iron phosphate(LFP)batteries with different safety valves are investigated under overheating.Compared to previous studies,the main contribution of this work is in studying and evaluating the effect of gas venting behavior and TR hazard severity of LFP batteries with three safety valve types.Two significant results are obtained:(Ⅰ)the safety valve type dominates over gas venting pressure of battery during safety venting,the maximum gas venting pressure of LFP batteries with a round safety valve is 3320 Pa,which is one order of magnitude higher than other batteries with oval or cavity safety valve;(Ⅱ)the LFP battery with oval safety valve has the lowest TR hazard as shown by the TR hazard assessment model based on gray-fuzzy analytic hierarchy process.This study reveals the effect of safety valve type on TR and gas venting,providing a clear direction for the safety valve design.
基金Supported by the National Natural Science Foundation of China(52075468)the General Project of Natural Science Foundation of Hebei Prov-ince(E2020203052)+1 种基金the Open Fund Project of Shaanxi Provincial Key Laboratory of Hydraulic Technology(YYJS2022KF14)the BasicInnovation Research Cultivation Project of Yanshan University(2021LGZD003)。
文摘The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intends to study the static characteristic of DRDNFV through the AMESet and AMESim simulation.It is explored under the circumstance of the fixed orifices being clogged and experimentally verified on the test bench.The results show that the pressure gain increases and the flow gain decreases with the increasing clogged degree of the fixed orifices on both sides.The zero bias increases synchronously with the increasing clogged degree of the unilateral fixed orifice.The experimental results are basically consistent with the theoretical curves and the theoretical correctness of the simulation model is effectively verified.The results can provide the theoretical reference for design,debugging,maintenance and fault diagnosis of DRDNFV.
文摘Pacemaker post-transcatheter aortic valve replacement is related to multifactorial risk.Nwaedozie et al brought to the body of evidence electrocardiogram and clinical findings.However,procedural characteristics have at least as much impact on the final need for a permanent pacemaker and potentially on the pacing rate.In this regard,long-term follow-up and understanding of the impact of long-term stimulation is of utmost importance.
文摘HACEK organisms represent a rare but important group of causative pathogens in endocarditis. These bacteria have historically been associated with culture-negative endocarditis;however, modern laboratory techniques have made this less common. In this case, we present a 74-year-old man who presented with acute onset altered mentation, fever, and sepsis. He was ultimately found to have Haemophilus influenzae meningitis, cerebral empyema, aortic valve endocarditis, psoas myositis, and L2 - L3 diskitis with osteomyelitis. Although HACEK organisms are commonly found in the oropharynx and upper respiratory tract in humans, our patient did not report recent preceding dental or ENT procedures. H. influenzae is responsible for approximately 0.16% of all cases of bacterial endocarditis, representing a very limited subset. Although generally considered low virulent pathogens, this case demonstrates the unusual extent of infection from a HACEK organism, H. influenzae, causing aortic valve endocarditis as well as atypical non-cardiac sequelae, including acute meningitis.
文摘Introduction: Treatments for cardiovascular diseases have increasingly evolved with the tendency to offer minimally invasive or transcatheter procedures instead of conventional sternotomy surgery. In this context, we highlight minimally invasive mitral valve surgery (MIMVS), which has been shown to be an increasingly solid option with some superior results when compared to the conventional technique: better pain control, shorter hospital stays, shorter recovery time, shorter readmission rate in the first postoperative year, better aesthetic results, and lower overall cost. Aim: This study aims to evaluate the stages of MIMVS, by primary mitral valve consultation, in our service and compare these results with data from the literature. Methods: All electronic medical records of patients who underwent MIMVS for primary mitral valve injury in the Encore Hospital from January 2020 to February 2023 were analyzed. Tabulation and statistical analysis were performed using the Microsoft Excel<sup>®</sup> program. Quantitative variables were presented as means, standard deviations. Results: 46 patients were enrolled in our study (Age: 59.1 ± 12.4 years old;60.8% Female, BMI: 26 ± 4.4 Kg/m<sup>2</sup>, Low risk STS score: 82.6%). The observed 30-day mortality was 2.1%, plastic rate of 23.9%, blood transfusion rate of 41.3%, length of stay in an intensive care bed (ICB) of 3.3 ± 3.3 days and hospital stay of 6.4 ± 5.1 days. Conclusions: We noticed that the MIMVS results carried out in our service agree with data from national and international literature with approximately 1.3 days more hospitalization in ICB.
文摘The mathematical model of the solenoid valve under varying temperatures is constructed to investigate its performance and enhance heat dissipation balance.The relationship between temperature and electromagnetic force is determined.Electrothermal coupling simulation using COMSOL is conducted,optimizing the outer diameter and length structure parameters of the coil.It is established that the heat dissipation of the coil is influenced by its outer diameter.Subsequently,based on optimized coil structure parameters,an orthogonal experimental design method combined with Ansys Maxwell is employed for simulation solution analysis to study the impact of structural parameters such as length,position,front and rear angles of the magnetic barrier ring in the iron core,armature length,and through-hole size on electromagnetic force.Optimal structural parameters are identified.Results indicate a decrease in steady-state electromagnet temperature by 3-4℃,an increase in the initial electromagnetic force by 32.63%,and a rise in the maximum electromagnetic force by 27.10%.
基金co-supported by the National Natural Science Foundation of China(No.51676164)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2020JZ-09)supported by the opening project of the State Key Laboratory of Explosion Science and Technology at Beijing Institute of Technology(No.KFJJ1913M)。
文摘The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveless air-breathing pulsed detonation engine with a supersonic internal compression inlet is investigated.Based on an ideal thermal cycle,the ideal equivalent pressure ratios(pcb)of the Pulsed Detonation Combustor(PDC)are obtained theoretically which are directly related with the propulsive performance of the engine.By introducing an orifice loss model into the cycles,the critical pressure drop ratios through the orifice for the PDC achieving pressure gain and the engine achieving thrust gain are studied.More influencing factors are investigated by the use of a one-dimensional(1-D)numerical simulation model.The operating characteristics of the pulse detonation engine are investigated with changes of the valve type,the inlet/outlet area ratio of the PDC,the nozzle area ratio,and flight conditions.All these factors can affect pcbof the PDC,and pcbcan be optimized by changing the geometry of the engine.The most important influence parameter is the valve type.When using an orifice-type aerodynamic valve,simulation results show that the PDC cannot achieve the pressure gain characteristics.When a supersonic internal compression inlet is introduced to the engine,whether the Pulse Detonation Engine(PDE)can achieve thrust gain comparable with that of an ideal Brayton cycle engine not only is related to the pressure gain of the combustor,but also needs to optimize the engine structure to reduce the total pressure loss.
文摘BACKGROUND Conduction and rhythm abnormalities requiring permanent pacemakers(PPM)are short-term complications following transcatheter aortic valve replacement(TAVR),and their clinical outcomes remain conflicting.Potential novel predictors of post-TAVR PPM,like QRS duration,QTc prolongation,and supraventricular arrhythmias,have been poorly studied.AIM To evaluate the effects of baseline nonspecific interventricular conduction delay and supraventricular arrhythmia on post-TAVR PPM requirement and determine the impact of PPM implantation on clinical outcomes.METHODS RESULTS Out of the 357 patients that met inclusion criteria,the mean age was 80 years,188(52.7%)were male,and 57(16%)had a PPM implantation.Baseline demographics,valve type,and cardiovascular risk factors were similar except for type II diabetes mellitus(DM),which was more prevalent in the PPM cohort(59.6%vs 40.7%;P=0.009).The PPM cohort had a significantly higher rate of pre-procedure right bundle branch block,prolonged QRS>120 ms,prolonged QTc>470 ms,and supraventricular arrhythmias.There was a consistently significant increase in the odds ratio(OR)of PPM implantation for every 20 ms increase in the QRS duration above 100 ms:QRS 101-120[OR:2.44;confidence intervals(CI):1.14-5.25;P=0.022],QRS 121-140(OR:3.25;CI:1.32-7.98;P=0.010),QRS 141-160(OR:6.98;CI:3.10-15.61;P<0.001).After model adjustment for baseline risk factors,the OR remained significant for type II DM(aOR:2.16;CI:1.18-3.94;P=0.012),QRS>120(aOR:2.18;CI:1.02-4.66;P=0.045)and marginally significant for supraventricular arrhythmias(aOR:1.82;CI:0.97-3.42;P=0.062).The PPM cohort had a higher adjusted OR of heart failure(HF)hospitalization(aOR:2.2;CI:1.1-4.3;P=0.022)and nonfatal myocardial infarction(MI)(aOR:3.9;CI:1.1-14;P=0.031)without any difference in mortality(aOR:1.1;CI:0.5-2.7;P=0.796)at one year.CONCLUSION Pre-TAVR type II DM and QRS duration>120,regardless of the presence of bundle branch blocks,are predictors of post-TAVR PPM.At 1-year post-TAVR,patients with PPM have higher odds of HF hospitalization and MI.
基金supported by the National Institute of Health(No.NIH R00HL134823).
文摘It has been hypothesized that leaflet substrates with a trilayer structure and anisotropicmechanical properties could be useful for the production of functional and long-lasting tissue-engineered leaflets.To investigate the influence of the anisotropic structural and mechanical characteristics of a substrate on cells,in this study,we electrospun trilayer anisotropic fibrous substrates and randomly oriented isotropic fibrous substrates(used as controls)from polycaprolactone polymers.Consequently,the random substrates had higher radial and lower circumferential tensile properties than the trilayer substrates;however,they had similar flexural properties.Porcine valvular interstitial cells cultured on both substrates produced random and trilayer cell-cultured constructs,respectively.The trilayer cell-cultured constructs had more anisotropic mechanical properties,17%higher cellular proliferation,14%more extracellular matrix(i.e.,collagen and glycosaminoglycan)production,and superior gene and protein expression,suggesting that more cells were in a growth state in the trilayer constructs than in the random constructs.Furthermore,the random and radial layers of the trilayer constructs had more vimentin,collagen,transforming growth factor-beta 1(TGF-ß1),transforming growth factor-beta 3(TGF-ß3)gene expression than in the circumferential layer of the constructs.This study verifies that the differences in structural,tensile,and anisotropic properties of the trilayer and random substrates influence the characteristics of the cells and ECM in the constructs.
文摘The paper discusses minimizing the effect of external mechanical vibration on hydraulic valves in different military hydraulic drive systems.The current research work presents an analysis of the potential to reduce vibration on the valve casing by installing a valve flexibly on a vibrating surface,i.e.,by introducing a material with known stiffness and damping characteristics between the valve casing and the vibrating surface-a steel spring package or special cushions made of elastomer material or of oilresistant rubber.The article also demonstrates that elastomer cushions placed inside the valve casingbetween the casing and the centering springs-can be used as a supplementary or alternative solution in the analyzed method for mitigating the transfer of vibrations.By using materials with appropriately selected elastic and dissipative properties,the effectiveness of vibro-isolation can be increased.The presented theoretical analyzes by linear and non-linear mathematical models have been verified experimentally.
基金Supported by National Natural Science Foundation of China(Grant Nos.51375227,51605200)Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20150518)
文摘This paper reviews the development of valve- less piezoelectric pump with cone-shaped tube chrono- logically, which have widely potential application in biomedicine and micro-electro-mechanical systems because of its novel principles and deduces the research direction in the future. Firstly, the history of valveless piezoelectric pumps with cone-shaped tubes is reviewed and these pumps are classified into the following types: single pump with solid structure or plane structure, and combined pump with parallel structure or series structure. Furthermore, the function of each type of cone-shaped tubes and pump structures are analyzed, and new direc- tions of potential expansion of valveless piezoelectric pumps with cone-shaped tubes are summarized and deduced. The historical argument, which is provided by the literatures, that for a valveless piezoelectric pump with cone-shaped tubes, cone angle determines the flow resistance and the flow resistance determines the flow direction. The argument is discussed in the reviewed pumps one by one, and proved to be convincing. Finally, it is deduced that bionics is pivotal in the development of valveless piezoelectric pump with cone-shaped tubes fromthe perspective of evolution of biological structure. This paper summarizes the current valveless piezoelectric pumps with cone-shaped tubes and points out the future development, which may provide guidance for the research of piezoelectric actuators.