Probabilistic Global Maximum Power Point Tracking Algorithm for Continuously Varying Partial Shading Conditions on Autonomous PV Systems

A photovoltaic (PV) string with multiple modules with bypass diodes frequently deployed on a variety of autonomous PV systems may present multiple power peaks under uneven shading. For optimal solar harvesting, there is a need for a control schema to force the PV string to operate at global maximum power point (GMPP). While a lot of tracking methods have been proposed in the literature, they are usually complex and do not fully take advantage of the available characteristics of the PV array. This work highlights how the voltage at operating point and the forward voltage of the bypass diode are considered to design a global maximum power point tracking (GMPPT) algorithm with a very limited global search phase called Fast GMPPT. This algorithm successfully tracks GMPP between 94% and 98% of the time under a theoretical evaluation. It is then compared against Perturb and Observe, Deterministic Particle Swarm Optimization, and Grey Wolf Optimization under a sequence of irradiance steps as well as a power-over-voltage characteristics profile that mimics the electrical characteristics of a PV string under varying partial shading conditions. Overall, the simulation with the sequence of irradiance steps shows that while Fast GMPPT does not have the best convergence time, it has an excellent convergence rate as well as causes the least amount of power loss during the global search phase. Experimental test under varying partial shading conditions shows that while the GMPPT proposal is simple and lightweight, it is very performant under a wide range of dynamically varying partial shading conditions and boasts the best energy efficiency (94.74%) out of the 4 tested algorithms.

Adaptive Variable Structure Control of MIMO Nonlinear Systems with Time-varying Delays and Unknown Dead-zones

In this paper, adaptive variable structure neural control is presented for a class of uncertain multi-input multi-output （MIMO） nonlinear systems with state time-varying delays and unknown nonlinear dead-zones. The unknown time-varying delay uncer- tainties are compensated for using appropriate Lyapunov-Krasovskii functionals in the design. The approach removes the assumption of linear function outside the deadband without necessarily constructing a dead-zone inverse as an added contribution. By utilizing the integral-type Lyapunov function and introducing an adaptive compensation term for the upper bound of the residual and optimal approximation error as well as the dead-zone disturbance, the closed-loop control system is proved to be semi-globally uniformly ultimately bounded. In addition, a modified adaptive control algorithm is given in order to avoid the high-frequency chattering phenomenon. Simulation results demonstrate the effectiveness of the approach.

Ergodicity and Invariance of Flows in Queuing Systems

In this paper, we investigate the flow of customers through queuing systems with randomly varying intensities. The analysis of the Kolmogorov-Chapman system of stationary equations for this model showed that it is not possible to construct a convenient symbolic solution. In this paper an attempt is made to circumvent this requirement by referring to the ergodicity theorems, which gives the conditions for the existence of the limit distribution in the service processes, but do not require knowledge of them.

Guaranteed cost control for networked control systems

The guaranteed cost control problem for networked control systems (NCSs) is addressed under communication constraints and varying sampling rate. First of all, a simple information-scheduling scheme is presented to describe the scheduling approach of system signals in NCSs. Then, based on such a scheme and given sampling method, the design procedure in dynamic output feedback manner is also derived which renders the closed loop system to be asymptotically stable and guarantees an upper bound of the LQ performance cost function.

Adaptive Robust Control for a Class of Uncertain MIMO Non-affine Nonlinear Systems

In this paper, the adaptive robust tracking control scheme is proposed for a class of multi-input and multi-output (MIMO) non-affine systems with uncertain structure and parameters, unknown control direction and unknown external disturbance based on backstepping technique. The MIMO non-affine system is first transformed into a time-varying system with strict feedback structure using the mean value theorem, and then the bounded time-varying parameters are estimated by adaptive algorithms with projection. To handle the possible 'controller singularity' problem caused by unknown control direction, a Nussbaum function is employed, and the dynamic surface control (DSC) method is applied to solve the problem of 'explosion of complexity' in backstepping control. It is proved that the proposed control scheme can guarantee that all signals of the closed-loop system are bounded through Lyapunov stability theorem and decoupled backstepping method. Simulation results are presented to illustrate the effectiveness of the proposed control scheme. © 2014 Chinese Association of Automation.

Delay and Its Time-derivative Dependent Robust Stability of Uncertain Neutral Systems with Saturating Actuators

This note concerns the problem of the robust stability of uncertain neutral systems with time-varying delay and saturating actuators. The system considered is continuous in time with norm bounded parametric uncertainties. By incorporating the free weighing matrix approach developed recently, some new delay-dependent stability conditions in terms of linear matrix inequalities （LMIs） with some tuning parameters are obtained. An estimate of the domain of attraction of the closed-loop system under a priori designed controller is proposed. The approach is based on a polytopic description of the actuator saturation nonlinearities and the Lyapunov- Krasovskii method. Numerical examples are used to demonstrate the effectiveness of the proposed design method.

Adaptive Control of MIMO Mechanical Systems with Unknown Actuator Nonlinearities Based on the Nussbaum Gain Approach

This paper investigates MIMO mechanical systems with unknown actuator nonlinearities. A novel Nussbaum analysis tool for MIMO systems is established such that unknown time-varying control coefficients are tackled. In contrast to existing literatures on continuous-time systems, the newly-developed Nussbaum tool focuses on extending the traditional Nussbaum result from one dimensional case to the multiple one. Specifically, not only the multiple unknown input coefficients are extended to the time-varying, but also the limitation of the prior knowledge of coefficients' upper and lower bounds is removed. Furthermore, an adaptive robust controller associated with the proposed tool is presented. The asymptotic tracking of MIMO mechanical systems is guaranteed with the help of the Lyapunov Theorem. Finally, a simulation example is provided to examine the validity of the proposed scheme. © 2014 Chinese Association of Automation.

A Survey of Output Feedback Robust MPC for Linear Parameter Varying Systems

For constrained linear parameter varying(LPV)systems,this survey comprehensively reviews the literatures on output feedback robust model predictive control(OFRMPC)over the past two decades from the aspects on motivations,main contributions,and the related techniques.According to the types of state observer systems and scheduling parameters of LPV systems,different kinds of OFRMPC approaches are summarized and compared.The extensions of OFRMPC for LPV systems to other related uncertain systems are also investigated.The methods of dealing with system uncertainties and constraints in different kinds of OFRMPC optimizations are given.Key issues on OFRMPC optimizations for LPV systems are discussed.Furthermore,the future research directions on OFRMPC for LPV systems are suggested.

Dynamic Stability Analysis of Linear Time-varying Systems via an Extended Modal Identification Approach

The problem of linear time-varying（LTV） system modal analysis is considered based on time-dependent state space representations, as classical modal analysis of linear time-invariant systems and current LTV system modal analysis under the ＂frozen-time＂ assumption are not able to determine the dynamic stability of LTV systems. Time-dependent state space representations of LTV systems are first introduced, and the corresponding modal analysis theories are subsequently presented via a stabilitypreserving state transformation. The time-varying modes of LTV systems are extended in terms of uniqueness, and are further interpreted to determine the system＇s stability. An extended modal identification is proposed to estimate the time-varying modes, consisting of the estimation of the state transition matrix via a subspace-based method and the extraction of the time-varying modes by the QR decomposition. The proposed approach is numerically validated by three numerical cases, and is experimentally validated by a coupled moving-mass simply supported beam exper- imental case. The proposed approach is capable of accurately estimating the time-varying modes, and provides anew way to determine the dynamic stability of LTV systems by using the estimated time-varying modes.

Repetitive Learning Control for Time-varying Robotic Systems： A Hybrid Learning Scheme

重复学习控制为不明确的变化时间的机器的系统追踪的 finite-time-trajectory 被介绍。在时间函数以一个反复的学习方法被学习的地方，一个混合学习计划被给在系统动力学应付经常、变化时间的 unknowns，没有泰勒表示的帮助，当常规微分学习方法为估计经常的被建议时。介绍重复学习控制为在每个周期的开始的起始的重新定位避免要求，是不同的，并且变化时间的 unknowns 不是必要的周期。随混合学习的采纳，靠近环的系统的州的变量的固定被保证，追踪的错误被保证作为重复增加收敛到零，这被显示出。建议计划的有效性通过数字模拟被表明。

Hybrid Estimation of State and Input for Linear Discrete Time-varying Systems： A Game Theory Approach

为线性分离变化时间的系统的 H 混合评价问题在这份报纸被调查，在估计的信号是状态和输入的线性联合的地方。设计目的从骚乱要求最坏的精力获得到是的评价错误不到规定水平。混合评价问题的最佳的答案是僵绳点一二播放器零和微分游戏。根据微分比赛途径，为混合评价问题的必要、足够的可解决的条件以一个 Riccati 微分方程的答案被提供。而且，如果可解决的条件满足，一个可能的评估者被建议。评估者被印射矩阵的一个获得矩阵和产量描绘，在后者反映在未知输入和输出评价错误之间的内部关系的地方。最后，一个数字例子被提供说明建议途径。

Time-variant fragility analysis of the bridge system considering time-varying dependence among typical component seismic demands

This paper presents a copula technique to develop time-variant seismic fragility curves for corroded bridges at the system level and considers the realistic time-varying dependence among component seismic demands. Based on material deterioration mechanisms and incremental dynamic analysis, the time-evolving seismic demands of components were obtained in the form of marginal probability distributions. The time-varying dependences among bridge components were then captured with the best fitting copula function, which was selected from the commonly used copula classes by the empirical distribution based analysis method. The system time-variant fragility curves at different damage states were developed and the effects of time-varying dependences among components on the bridge system fragility were investigated. The results indicate the time-varying dependence among components significantly affects the time-variant fragility of the bridge system. The copula technique captures the nonlinear dependence among component seismic demands accurately and easily by separating the marginal distributions and the dependence among them.

Global stabilizing controller design for linear time-varying systems and its application on BTT missiles

A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved by the invariant eigenvalues and the gradually varying eigenvectors. A sufficient stability criterion is given by constructing a series of Lyapunov functions based on the selected discrete characteristic points. An important contribution is that it provides a simple and feasible approach for the design of gain-scheduled controllers for linear time-varying systems, which can guarantee both the global stability and the desired closed-loop performance of the resulted system. The method is applied to the design of a BTT missile autopilot and the simulation results show that the method is superior to the traditional one in sense of either global stability or system performance.

Guaranteed Cost Consensus for High-dimensional Multi-agent Systems With Time-varying Delays

Guaranteed cost consensus analysis and design problems for high-dimensional multi-agent systems with time varying delays are investigated. The idea of guaranteed cost con trol is introduced into consensus problems for high-dimensiona multi-agent systems with time-varying delays, where a cos function is defined based on state errors among neighboring agents and control inputs of all the agents. By the state space decomposition approach and the linear matrix inequality(LMI)sufficient conditions for guaranteed cost consensus and consensu alization are given. Moreover, a guaranteed cost upper bound o the cost function is determined. It should be mentioned that these LMI criteria are dependent on the change rate of time delays and the maximum time delay, the guaranteed cost upper bound is only dependent on the maximum time delay but independen of the Laplacian matrix. Finally, numerical simulations are given to demonstrate theoretical results.

A new reduction-based LQ control for dynamic systems with a slowly time-varying delay

Time delays in the feedback control often dete- riorate the control performance or even cause the instability of a dynamic system. This paper presents a control strategy for the dynamic system with a constant or a slowly time-varying input delay based on a transformation, which sire-plifies the time-delay system the relation is discussed for into a delay-free one. Firstly, two existing reduction-based linear quadratic controls. One is continuous and the other is discrete. By extending the relation, a new reduction-based control is then developed with a numerical algorithm presented for practical control implementation. The controller suggested by the proposed method has such a promising property that it can be used for the cases of different values of an input time delay without redesign of controller. This property provides the potential for stabilizing the dynamic system with a time-varying input delay. Consequently, the application of the proposed method to the dynamic system with a slowly time-varying delay is discussed. Finally, numerical simulations are given to show the efficacy and the applicability of the method.