Integration system research and development for three-dimensional laser scanning information visualization in goaf

An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.

Application of Three-dimensional Laser Scanning Technology in the Teaching Practice of Surveying and Mapping of Ancient Buildings

Based on the study of the application of three-dimensional laser scanning technology in ancient building surveying and mapping,this paper briefly describes the working principle and flow of three-dimensional laser scanning technology.Based on the practical application,this paper puts forward the discussion of related problems and matters needing attention.This has a certain reference significance for the study of new technology in surveying and mapping of ancient buildings.

Method for visualizing the shear process of rock joints using 3D laser scanning and 3D printing techniques

This study presents a visualized approach for tracking joint surface morphology.Three-dimensional laser scanning(3DLS)and 3D printing(3DP)techniques are adopted to record progressive failure during rock joint shearing.The 3DP resin is used to create transparent specimens to reproduce the surface morphology of a natural joint precisely.The freezing method is employed to enhance the mechanical properties of the 3DP specimens to reproduce the properties of hard rock more accurately.A video camera containing a charge-coupled device(CCD)camera is utilized to record the evolution of damaged area of joint surface during the direct shear test.The optimal shooting distance and shooting angle are recommended to be 800 mm and 40?,respectively.The images captured by the CCD camera are corrected to quantitatively describe the damaged area on the joint surface.Verification indicates that this method can accurately describe the total sheared areas at different shear stages.These findings may contribute to elucidating the shear behavior of rock joints.

Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak,cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laserscanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation quality assessment with the laser scanning technology can be reduced by 70%e90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

Study on Estimation Method of Rock Mass Discontinuity Shear Strength Based on Three-Dimensional Laser Scanning and Image Technique

The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.

Quantitative analysis of the ribbon synapse number of cochlear inner hair cells in C57BL/6J mice using the three-dimensional modeling method

In mammals,the ribbon synapses of cochlear inner hair cells are a synaptic structure of the first sensory nerve in the pathway of acoustical signal transmission to the acoustic center,and it is directly involved in voice coding and neurotransmitter release. It is difficult to quantitatively analyze the ribbon synaptic number only using an electron microscope,because the ribbon synaptic number is relatively limited and their location is deep. In this study,the specific presynaptic structure-RIBEYE,and non-specific postsynaptic structure-GluR 2 & 3 in C57BL/6J mouse basilar membrane samples were treated by immunofluorescent labeling. Serial section was performed on the samples using a laser scanning confocal microscope,and then the serial sections were used to build three-dimensional models using 3DS MAX software. Each fluorescein color pair indicates one synapse,so the number of ribbon synapses of inner hair cells is obtained. The spatial distribution and the number of ribbon synapses of cochlear inner hair cells were clearly shown in this experiment,and the mean number of ribbon synapses per inner hair cell was 16.10±1.03. Our results have demonstrated the number of ribbon synapses is accurately calculated by double immunofluorescent labeling to presynaptic and postsynaptic structures,serial sections obtained using a laser scanning confocal microscope,and three-dimensional modeling obtained using 3DS MAX software. The method above is feasible and has important significance for further exploring the mechanism of sensorineural deafness.

Methods of configuration test and deformation analysis for large airship

In recent years, high-altitude aerostats have been increasingly developed in the direction of multi-functionality and large size. Due to the large size and the high flexibility, new challenges for large aerostats have appeared in the configuration test and the deformation analysis. The methods of the configuration test and the deformation analysis for large airship have been researched and discussed. A tested method of the configuration,named internal scanning, is established to quickly obtain the spatial information of all surfaces for the large airship by the three-dimensional(3D) laser scanning technology. By using the surface wrap method, the configuration parameters of the large airship are calculated. According to the test data of the configuration, the structural dimensions such as the distances between the characteristic sections are measured. The method of the deformation analysis for the airship contains the algorithm of nonuniform rational B-splines(NURBS) and the finite element(FE)method. The algorithm of NURBS is used to obtain the reconfiguration model of the large airship. The seams are considered and the seam areas are divided. The FE model of the middle part of the large airship is established. The distributions of the stress and the strain for the large airship are obtained by the FE method. The position of the larger deformation for the airship is found.

Three-dimensional structure of CA1 pyramidal cells in rat hippocampus——Optical recording of LSM and computer simulation of fractal structure

The optical recording of three-dimensional(3-D)reconstruction of CA1 pyramidal cells wasderived from the studies on the CA1 region of the hippocampus in adult male Wistar rats.The recordingwas produced by the Confocal Laser Scan Microscope(LSM-10).The attemption was to outline themorphological neural network of CA1 pyramidal cells organization,following the trail of axo-dendritic connec-tions in 3-D spatial distributions among neurons.The fractal structure of neurons with their dendritic andaxonal trees using fractal algorithm was noticed,and 2—18 simulated cells were obtained using PC-486 comput-er.The simulational cells are similar in morphology to the natural CA1 hippocampal pyramidal cells.There-fore,the exploitation of an advanced neurohistological research technique combining optical recording of theLSM-10 and computer simulation of fractal structure can provide the quantitative fractal structural basis forchaosic dynamics of brain.

Co-developing an international TLS network for the 3D ecological understanding of global trees:System architecture,remote sensing models,and functional prospects

Trees are spread worldwide,as the watchmen that experience the intricate ecological effects caused by various environmental factors.In order to better understand such effects,it is preferential to achieve finely and fully mapped global trees and their environments.For this task,aerial and satellite-based remote sensing(RS)methods have been developed.However,a critical branch regarding the apparent forms of trees has significantly fallen behind due to the technical deficiency found within their globalscale surveying methods.Now,terrestrial laser scanning(TLS),a state-of-the-art RS technology,is useful for the in situ three-dimensional(3D)mapping of trees and their environments.Thus,we proposed co-developing an international TLS network as a macroscale ecotechnology to increase the 3D ecological understanding of global trees.First,we generated the system architecture and tested the available RS models to deepen its ground stakes.Then,we verified the ecotechnology regarding the identification of its theoretical feasibility,a review of its technical preparations,and a case testification based on a prototype we designed.Next,we conducted its functional prospects by previewing its scientific and technical potentials and its functional extensibility.Finally,we summarized its technical and scientific challenges,which can be used as the cutting points to promote the improvement of this technology in future studies.Overall,with the implication of establishing a novel cornerstone-sense ecotechnology,the co-development of an international TLS network can revolutionize the 3D ecological understanding of global trees and create new fields of research from 3D global tree structural ecology to 3D macroecology.

Rice seeds identification based on back propagation neural network model

Rice quality directly affects the final rice yield.In order to achieve rapid,non-destructive testing of rice seeds,this paper combines the three-dimensional laser scanning technology and back propagation(BP)neural network algorithm to build a rice seeds identification platform.The information on rice seed surface is collected from four angles and processed using Geomagic Studio software.Based on the noise filtering,smoothing of the point cloud,vulnerability repair,and downsampling,the three-dimensional(3D)morphological characteristics of a rice seed surface,and the projection features of the main plane cross-section are obtained through the calculation of the features.The experiments were performed on five rice varieties,including Da Hua aromatic glutinous,Hong ShiⅠ,Tian You VIII,Xin Dao X,and Yu Jing VI.The resulting input vector consisted respectively of:(1)nine 3D morphological surface features,(2)nine projection features of the main cross-section plane of rice,and(3)all of the above features.The results showed that for an input vector consisting of nine surface 3D morphological features,the recognition rate of the five rice varieties was 95%,96%,87%,93%,and 89%,respectively;for an input vector consisting of nine projection features of the main cross-section plane of rice seeds,the recognition rate was 96%,96%,90%,92%,and 89%,respectively;and lastly,for an input vector consisting of all the features,the highest recognition rate of 96%,97%,91%,94%,and 90%,respectively,was achieved.The analysis showed that rice varieties could be identified by using 3D laser scanning.Therefore,the proposed method can improve the accuracy of rice varieties identification.