Transfer matrix method for free and forced vibrations of multi-level functionally graded material stepped beams with different boundary conditions

Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore the dynamic behaviors of an FGM stepped beam with different boundary conditions based on an efficient solving method.Under the assumptions of the Euler-Bernoulli beam theory,the governing differential equations of an individual FGM beam are derived with Hamilton’s principle and decoupled via the separation-of-variable approach.Then,the free and forced vibrations of the FGM stepped beam are solved with the transfer matrix method(TMM).Two models,i.e.,a three-level FGM stepped beam and a five-level FGM stepped beam,are considered,and their natural frequencies and mode shapes are presented.To demonstrate the validity of the method in this paper,the simulation results by ABAQUS are also given.On this basis,the detailed parametric analyses on the frequencies and dynamic responses of the three-level FGM stepped beam are carried out.The results show the accuracy and efficiency of the TMM.

Closed-form steady-state solutions for forced vibration of second-order axially moving systems

Second-order axially moving systems are common models in the field of dynamics, such as axially moving strings, cables, and belts. In the traditional research work, it is difficult to obtain closed-form solutions for the forced vibration when the damping effect and the coupling effect of multiple second-order models are considered.In this paper, Green's function method based on the Laplace transform is used to obtain closed-form solutions for the forced vibration of second-order axially moving systems. By taking the axially moving damping string system and multi-string system connected by springs as examples, the detailed solution methods and the analytical Green's functions of these second-order systems are given. The mode functions and frequency equations are also obtained by the obtained Green's functions. The reliability and convenience of the results are verified by several examples. This paper provides a systematic analytical method for the dynamic analysis of second-order axially moving systems, and the obtained Green's functions are applicable to different second-order systems rather than just string systems. In addition, the work of this paper also has positive significance for the study on the forced vibration of high-order systems.

Analysis of Dynamic Characteristics of Forced and Free Vibrations of Mill Roll System Based on Fractional Order Theory

In this paper,the main researches are focused on the horizontal nonlinear vibration characteristics of roll systems for rolling mill,mainly including the study of forced vibration and free vibration of the roller.Firstly,the nonlinear damping parameters and nonlinear stiffness parameters within interface of the rolling mill are both considered,and a fractional-order differential term is also introduced to model the horizontal nonlinear vibration.Secondly,the averaging method is introduced to solve the forced vibration system of the mill roll system,and the amplitude-frequency characteristic curves of the system are obtained for different orders,external excitation amplitudes,stiffness and fractional order coefficients.Thirdly,the amplitude-frequency and phasefrequency characteristics of the free vibration of the mill roll system are investigated at different fractional orders.Then,the accuracy of the averaging method for solving the dynamic characteristics of the system is verified by numerical analysis,and the effect of the fractional differential term coefficients and order on the dynamic characteristics of the roll system are investigated.Finally,the time-frequency characteristics and phase-frequency characteristics of free vibration systems at different fractional orders are studied.The validity of the theoretical study is also verified through experiments.

NON-LINEAR FORCED VIBRATION OF AXIALLY MOVING VISCOELASTIC BEAMS

The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is derived from the dynamical, constitutive equations and geometrical relations. By referring to the quasi-static stretch assumption, the partial-differential non-linearity is reduced to an integro-partial-differential one. The method of multiple scales is directly applied to the governing equations with the two types of non-linearity, respectively. The amplitude of near- and exact-resonant steady state is analyzed by use of the solvability condition of eliminating secular terms. Numerical results are presented to show the contributions of foundation vibration amplitude, viscoelastic damping, and nonlinearity to the response amplitude for the first and the second mode.

In-plane forced vibration of curved pipe conveying fluid by Green function method

The Green function method （GFM） is utilized to analyze the in-plane forced vibration of curved pipe conveying fluid, where the randomicity and distribution of the external excitation and the added mass and damping ratio are considered. The Laplace transform is used, and the Green functions with various boundary conditions are obtained subsequently. Numerical calculations are performed to validate the present solutions, and the effects of some key parameters on both tangential and radial displacements are further investigated. The forced vibration problems with linear and nonlinear motion constraints are also discussed briefly. The method can be radiated to study other forms of forced vibration problems related with pipes or more extensive issues.

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.

Reducing force transmissibility in multiple degrees of freedom structures through anti-symmetric nonlinear viscous damping

In the present study, the Volterra series theory is adopted to theoretically investigate the force transmissibility of multiple degrees of freedom （MDOF） structures, in which an isolator with nonlinear anti-symmetric viscous damping is assembled. The results reveal that the anti-symmetric nonlinear viscous damping can significantly reduce the force trans- missibility over all resonance regions for MDOF structures with little effect on the transmissibility over non-resonant and isolation regions. The results indicate that the vibration isolators with an anti-symmetric damping characteristic have great potential to solve the dilemma occurring in the design of linear viscously damped vibration isolators where an increase of the damping level reduces the force transmissibility over resonant frequencies but increases the transmissibility over non-resonant frequency regions. This work is an extension of a previous study in which MDOF structures installed on the mount through an isolator with cubic nonlinear damping are considered. The theoretical analysis results are also verified by simulation studies.

The Interface Stress Field in the Elastic System Consisting of the Hollow Cylinder and Surrounding Elastic Medium Under 3D Non-Axisymmetric Forced Vibration

The paper develops and employs analytical-numerical solution method for the study of the time-harmonic dynamic stress field in the system consisting of the hollow cylinder and surrounding elastic medium under the non-axisymmetric forced vibration of this system.It is assumed that in the interior of the hollow cylinder the point-located with respect to the cylinder axis,non-axisymmetric with respect to the circumferential direction and uniformly distributed time-harmonic forces act.Corresponding boundary value problem is solved by employing of the exponential Fourier transformation with respect to the axial coordinate and by employing of the Fourier series expansion of these transformations.Numerical results on the frequency response of the interface normal stresses are presented and discussed.

Joining Force of Heterogeneous Titanium Alloy in Linear Friction Welding Process

A dynamometer was designed and manufactured to measure the joining force in the linear friction welding process.The error percentages of the dynamometer in the upset(x)and vibration(y)directions were 0.9% and 0.75%,respectively.The cross-sensitivity range of the dynamometer was 1.2%—3.3% in the two directions.The precision level satisfies the requirements of the dynamometer test.The joining force of the TC17 and TC11 heterogeneous titanium alloys in the linear friction welding process was used to test the manufactured dynamometer.The test results showed that the upset force was large,but the vibration force showed a smaller change in TC11 during the linear friction welding process.In addition,the upset and vibration forces of the linear friction welding were greater with a short welding time than those with a long welding time.

Numerical Simulation of Self-Excited and Forced Vibration of Circular Cylinders in Current

Numerical simulations of a low-mass-damping circular cylinder which can oscillate freely at transverse and stream- wise directions are presented in this work. The Navier-Stokes equations are solved with finite volume method, and large eddy simulation of vortex is also performed in the calculation. In order to implement dynamic mesh, overlapping grids are generated to lessen the computation for mesh field itself. Self-excited vibrations are firstly calculated to obtain the average amplitudes and frequencies of the target circular cylinder in the current flow situation, and then forced oscillations are implemented with parameters obtained in vortex-induced vibrations previously. With slight amplitude modulation, time series of displacements in vortex-induced vibrations are essentially harmonic. Regarding the fluid force, which are larger in forced oscillations than those in corresponding self-excited cases because the fluid subtracts energy from the forced cylinders. The phase angles between forces and displacements are 0° and 180° for self-excited ease and forced case respectively. In vortex-induced vibrations, the interactions between fluid and structure produce some weakly energetic vortices which induce the modulations of amplitude and frequency.

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES(Ⅰ)—RECTANGULAR PLATES WITH FOUR CLAMPED EDGES AND WITH THREE CLAMPED EDGES

In this paper the method of the reciprocal theorem (MRT) is extended to solve the steady state responses of rectangular plater under harmonic disturbing forces. A series of the closed solutions of rectangular plates with various boundary conditions are given and the tables and figures which have practical value are provided.MRT is a simple, convenient and general method for solving the steady stale responses of rectangular plates under various harmonic disturbing forces.The paper contains three parts: (I) rectangular plates with four damped edges and with three clamped edges; (II) rectangular plates with two adjacent clamped edges; (III) cantilever plates.We arc going to publish them one after another.

Forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by CNTs based on MCST with temperature-variable material properties

In this study, free and forced vibration analysis of nano-composite rotating pressurized microbeam reinforced by carbon nanotubes （CNTs） under magnetic field based on modify couple stress theory （MCST） with temperature-variable material propertiesis presented. Also, the boundary conditions at two ends of nano-composite rotating pressurized microbeam reinforced by CNTs are considered as simply supported. The governing equations are obtained based on the Hamilton＇s principle and then computed these equations by using Navier＇s solution. The magnetic field is inserted in the thickness direction of the nano-composite microbeam. The effects of various parameters such as angular velocity, temperature changes, and pressure between of the inside and outside, the magnetic field, material length scale parameter, and volume fraction of nanocomposite microbeam on the natural frequency and response systemare studied. The results show that with increasing volume fraction of nano-composite microbeam, thickness, material length scale parameter, and magnetic fields, the natural frequency increases. The results of this research can be used for optimization of micro-structures and manufacturing sensors, displacement fluid, and drug delivery.

Forced response of quadratic nonlinear oscillator: comparison of various approaches

The primary resonances of a quadratic nonlinear system under weak and strong external excitations are investigated with the emphasis on the comparison of dif- ferent analytical approximate approaches. The forced vibration of snap-through mecha- nism is treated as a quadratic nonlinear oscillator. The Lindstedt-Poincar method, the multiple-scale method, the averaging method, and the harmonic balance method are used to determine the amplitude-frequency response relationships of the steady-state responses. It is demonstrated that the zeroth-order harmonic components should be accounted in the application of the harmonic balance method. The analytical approximations are com- pared with the numerical integrations in terms of the frequency response curves and the phase portraits. Supported by the numerical results, the harmonic balance method pre- dicts that the quadratic nonlinearity bends the frequency response curves to the left. If the excitation amplitude is a second-order small quantity of the bookkeeping parameter, the steady-state responses predicted by the second-order approximation of the Lindstedt- Poincar method and the multiple-scale method agree qualitatively with the numerical results. It is demonstrated that the quadratic nonlinear system implies softening type nonlinearity for any quadratic nonlinear coefficients.

Forced vibration and special effects of revolution shells in turning point range

The forced vibration in the turning point frequency range of a truncated revolution shell subject to a membrane drive or a bending drive at its small end or large end is studied by applying the uniformly valid solutions obtained in a previous paper. The vibration shows a strong coupling between the membrane and bending solutions： either the membrane drive or the bending drive causes motions of both the membrane type and bending type. Three interesting effects characteristic of the forced vibration emerge from the coupling nature： the non-bending effect, the inner-quiescent effect and the inner-membrane-motion-and-outer-bending-motion effect. These effects may have potential applications in engineering.

VIBRATIONS OF STEPPED ONE-WAY THIN RECTANGULAR PLATES SUBJECTED TO IN-PLANE TENSILE/ COMPRESSIVE FORCE IN Y-DIRECTION ON WINKLER'S FOUNDATION

Differential equations of free/forced vibrations of n_step one_way thin rectangular plates subjected to in_plane tensile/compressive force in y_direction on Winkler's foundation are established by using singular functions, their general solutions solved for, expression of vibration mode function and frequency equation on usual supports derived with W operator. Influence functions for various cases deduced here may also be used to solve problems of static buckling or stability for beams and plates in relevant circumstances.

RECIPROCAL THEOREM METHOD FOR THE FORCED VIBRATIONOF ELASTIC THICK RECTANGULAR PLATES

In this paper, reciprocal theorem method (RTM) is generalized to solve the problems for the forced vibration of thick rectangular plates based on the Reissner's theory. The paper derives the dynamic basic solution of thick rectangular; and the exact analytical solution of the steady-state responses of thick rectangular plates with three clamped edges and one free edge under harmonic uniformly distributed disturbing forces is found by RTM. It is regarded as a simple, convenient and general method for calculating the steady-stare responses of forced vibration of thick rectangular plates.

SHEAR EFFECTS ON LARGE AMPLITUDE FORCED VIBRATIONOF SYMMETRICALLY LAMINATED RECTILINEARLYORTHOTROPIC CIRCULAR PLATES

In this paper, nonlinear forced vibration of symmetrically laminated rectilinearly orthotropic circular plates excited by a harmonic force q(0)cos omega t including effects of transverse shear deformation is discussed. The analytical solution for the relationship between forcing frequency and amplitude of vibration is obtained by Galerkin's method. Finally, the paper analyses the effect of the transverse shear on the vibration of the plate and gives the ratio of nonlinear period to linear period for nonlinear free vibration of the plate.

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES(Ⅱ)—RECTANGULAR PLATES WITH TWO ADJACENT CLAMPED EDGES

In this paper, applying the method of reciprocal theorem, we give the distributions of the amplitude of bending moments along clamped edges and the amplitude of deflections along free edges of rectangular plates with two adjacent clamped edges under harmonic distributed and concentrated loads.

THE METHOD OF THE RECIPROCAL THEOREM OF FORCED VIBRATION FOR THE ELASTIC THIN RECTANGULAR PLATES(Ⅲ)—CANTILEVER RECTANGULAR PLATES

In this paper, applying the method of the reciprocal theorem, we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic load acting at any point of the plates, the figures and tables of number value of bending moment and the deflection amplitudes as well.

Asymptotic analysis on weakly forced vibration of axially moving viscoelastic beam constituted by standard linear solid model

The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved. The nonlinear equations governing the transverse vibration are derived from the dynamical, constitutive, and geometrical relations. The method of multiple scales is used to determine the steady-state response. The modulation equation is derived from the solvability condition of eliminating secular terms. Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation. The stability of non- trivial steady-state response is examined via the Routh-Hurwitz criterion.