The Cenozoic volcanostratigraphy in the Changbaishan area had complex building processes.Twenty-two eruption periods have been determined from the Wangtian'e, Touxi, and Changbaishan volcanoes. The complex volcanostr...The Cenozoic volcanostratigraphy in the Changbaishan area had complex building processes.Twenty-two eruption periods have been determined from the Wangtian'e, Touxi, and Changbaishan volcanoes. The complex volcanostratigraphy of the Changbaishan area can be divided into four types of filling patterns from bottom to top. They are lava flows filling in valleys(LFFV), lava flows filling in platform(LFFP), lava flows formed the cone(LFFC), and pyroclastic Flow filling in crater or valleys(PFFC/V). LFFV has been divided into four layers and terminates as a lateral overlap. The topography of LFFV, which is controlled by the landform, is lens shaped with a wide flat top and narrow bottom.LFFP has been divided into three layers and terminates as a lateral downlap. The topography of LFFP is sheet and tabular shaped with a narrow top and wide bottom. It has large width to thickness ratio. It was built by multiple eruptive centers distributed along the fissure. The topography of LFFC, which is located above the LFFP, has a hummocky shape with a narrow sloping top and a wide flat bottom. It terminates as a later downlap or backstepping. It has large width to thickness ratio. It was built by a single eruptive center. The topography of PFFC/V, which located above the LFFC, LFFP, or valley, has the shape of fan and terminates as a lateral downlap or overlap. It has a small width to thickness ratio and was built by a single eruptive center. The filling pattern is controlled by temperature, SiO_2 content,volatile content, magma volume, and the paleolandform. In the short term, the eruptive production of the Changbaishan area is comenditic ash or pumice of a Plinian type eruption. The eruptive volume in future should be smaller than that of the Baguamiao period, and the filling pattern should be PFFC/V,which may cause huge damage to adjacent areas.展开更多
The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphi...The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphic structure of an outcrop near the Hailaier Rift Basin was analyzed to understand the characteristics and causal factors of physical boundaries.Further,3D seismic reflection data and analysis of deep boreholes in the Songliao Rift Basin were used to establish the relationship between volcanic seismic reflection configurations and volcanostratigraphic structures.These studies suggested that in volcanic successions,physical boundaries coincide with volcanic boundaries,and their distributions are controlled by the stacking patterns of volcanic units.Therefore,volcanic seismic reflection configurations can be interpreted in terms of the stacking patterns of volcanic units.These are also referred to as general bedding patterns in volcanostratigraphy.Furthermore,four typical seismic reflection configurations were identified,namely,the chaotic,the parallel continuous,the hummocky,the multi-mound superimposed and the composite.The corresponding interpretation models comprised single massive unit,vertical,intersectional,lateral multi-mound,and composite stacking patterns.The hummocky and composite reflection configurations with intersectional and composite stacking patterns are the most favorable for the exploration of volcanic reservoirs in rift basins.展开更多
Just like in sedimentary stratigraphy, the factor for constructing volcanostratigraphic volcanostratigraphic boundary is an important framework. The fundamental factor of volcanostratigraphic boundaries is to classify...Just like in sedimentary stratigraphy, the factor for constructing volcanostratigraphic volcanostratigraphic boundary is an important framework. The fundamental factor of volcanostratigraphic boundaries is to classify the types and define their characteristics. Based on field investigation and cross-wells section analysis of Mesozoic volcanostratigraphy in NE China, 5 types of volcanostratigraphic boundaries have been recognized, namely eruptive conformity boundary (ECB), eruptive unconformity boundary (EUB), eruptive interval unconformity boundary (EIUB), tectonic unconformity boundary (TUB) and intrusive contacts boundary (ICB). Except ICB, the unconformity boundaries can be divided into angular unconformity and paraconformity. The time spans and signs of these boundaries are analyzed by using age data of some volcanic fields that have been published. The time spans of ECB and EUB are from several minutes to years. In lava flows, cooling crust is distributed above and below ECB and EUB; in pyroclastic flows, airfalls and lahars, a fine layer below these boundaries has no discernable erosion at every part of the boundary. EUB may be curved or cross curved and jagged. The scale of ECB/EUB is dependent on the scale of lava flow or pyroclastic flows. The time span of EIUB is from decades to thousands of years. There is also weathered crust under EIUB and sedimentary rock beds overlie EIUB. In most instances, weathered crust and thin sedimentary beds are associated with each other laterally. The boundary is a smooth curved plane. The scale of EIUB is dependent on the scale of the volcano or volcano groups. The characteristics of TUB are similar to EIUB's. The time interval of TUB is from tens of thousands to millions of years. The scale of TUB depends on the scale of the basin or volcanic field. Both the lab data and logging data of wells in the Songliao Basin reveal that the porosity is greatly related to the boundaries in the lava flows. There is a high-porosity belt below ECB, EUB or EIUB, and the porosity decreases when it is apart from the boundary. The high-porosity belt below ECB and EUB is mainly contributed by primary porosity, such as vesicles. The high-porosity belt below EIUB is mainly contributed by primary and secondary porosity, such as association of vesicles and spongy pores, so the area near the boundary in lava flows is a very important target for reservoirs.展开更多
基金supported by the Natural Science Foundation of Jilin Province(20170101001JC)Natural Science Foundation of China(41472304)National Major Fundamental Research and Development Projects(2012CB822002)
文摘The Cenozoic volcanostratigraphy in the Changbaishan area had complex building processes.Twenty-two eruption periods have been determined from the Wangtian'e, Touxi, and Changbaishan volcanoes. The complex volcanostratigraphy of the Changbaishan area can be divided into four types of filling patterns from bottom to top. They are lava flows filling in valleys(LFFV), lava flows filling in platform(LFFP), lava flows formed the cone(LFFC), and pyroclastic Flow filling in crater or valleys(PFFC/V). LFFV has been divided into four layers and terminates as a lateral overlap. The topography of LFFV, which is controlled by the landform, is lens shaped with a wide flat top and narrow bottom.LFFP has been divided into three layers and terminates as a lateral downlap. The topography of LFFP is sheet and tabular shaped with a narrow top and wide bottom. It has large width to thickness ratio. It was built by multiple eruptive centers distributed along the fissure. The topography of LFFC, which is located above the LFFP, has a hummocky shape with a narrow sloping top and a wide flat bottom. It terminates as a later downlap or backstepping. It has large width to thickness ratio. It was built by a single eruptive center. The topography of PFFC/V, which located above the LFFC, LFFP, or valley, has the shape of fan and terminates as a lateral downlap or overlap. It has a small width to thickness ratio and was built by a single eruptive center. The filling pattern is controlled by temperature, SiO_2 content,volatile content, magma volume, and the paleolandform. In the short term, the eruptive production of the Changbaishan area is comenditic ash or pumice of a Plinian type eruption. The eruptive volume in future should be smaller than that of the Baguamiao period, and the filling pattern should be PFFC/V,which may cause huge damage to adjacent areas.
基金Projects(41472304,41430322) supported by the National Natural Science Foundation of ChinaProject(2012CB822002) supported by National Major State Basic Research Program of China
文摘The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphic structure of an outcrop near the Hailaier Rift Basin was analyzed to understand the characteristics and causal factors of physical boundaries.Further,3D seismic reflection data and analysis of deep boreholes in the Songliao Rift Basin were used to establish the relationship between volcanic seismic reflection configurations and volcanostratigraphic structures.These studies suggested that in volcanic successions,physical boundaries coincide with volcanic boundaries,and their distributions are controlled by the stacking patterns of volcanic units.Therefore,volcanic seismic reflection configurations can be interpreted in terms of the stacking patterns of volcanic units.These are also referred to as general bedding patterns in volcanostratigraphy.Furthermore,four typical seismic reflection configurations were identified,namely,the chaotic,the parallel continuous,the hummocky,the multi-mound superimposed and the composite.The corresponding interpretation models comprised single massive unit,vertical,intersectional,lateral multi-mound,and composite stacking patterns.The hummocky and composite reflection configurations with intersectional and composite stacking patterns are the most favorable for the exploration of volcanic reservoirs in rift basins.
基金supported by the National Natural Science Foundation of China(41002038)the National Major Fundamental Research and Development Projects(2012CB822002 and 2009CB219304)
文摘Just like in sedimentary stratigraphy, the factor for constructing volcanostratigraphic volcanostratigraphic boundary is an important framework. The fundamental factor of volcanostratigraphic boundaries is to classify the types and define their characteristics. Based on field investigation and cross-wells section analysis of Mesozoic volcanostratigraphy in NE China, 5 types of volcanostratigraphic boundaries have been recognized, namely eruptive conformity boundary (ECB), eruptive unconformity boundary (EUB), eruptive interval unconformity boundary (EIUB), tectonic unconformity boundary (TUB) and intrusive contacts boundary (ICB). Except ICB, the unconformity boundaries can be divided into angular unconformity and paraconformity. The time spans and signs of these boundaries are analyzed by using age data of some volcanic fields that have been published. The time spans of ECB and EUB are from several minutes to years. In lava flows, cooling crust is distributed above and below ECB and EUB; in pyroclastic flows, airfalls and lahars, a fine layer below these boundaries has no discernable erosion at every part of the boundary. EUB may be curved or cross curved and jagged. The scale of ECB/EUB is dependent on the scale of lava flow or pyroclastic flows. The time span of EIUB is from decades to thousands of years. There is also weathered crust under EIUB and sedimentary rock beds overlie EIUB. In most instances, weathered crust and thin sedimentary beds are associated with each other laterally. The boundary is a smooth curved plane. The scale of EIUB is dependent on the scale of the volcano or volcano groups. The characteristics of TUB are similar to EIUB's. The time interval of TUB is from tens of thousands to millions of years. The scale of TUB depends on the scale of the basin or volcanic field. Both the lab data and logging data of wells in the Songliao Basin reveal that the porosity is greatly related to the boundaries in the lava flows. There is a high-porosity belt below ECB, EUB or EIUB, and the porosity decreases when it is apart from the boundary. The high-porosity belt below ECB and EUB is mainly contributed by primary porosity, such as vesicles. The high-porosity belt below EIUB is mainly contributed by primary and secondary porosity, such as association of vesicles and spongy pores, so the area near the boundary in lava flows is a very important target for reservoirs.