针对构网型变流器(grid-forming voltage source converter,GFM-VSC)系统在大扰动下暂态稳定问题,现有研究未能充分考虑电力电子电源暂态快速响应与控制可塑的特点。为此,以GFM-VSC为对象,借助等面积法原理与相平面图法,从能量角度揭示...针对构网型变流器(grid-forming voltage source converter,GFM-VSC)系统在大扰动下暂态稳定问题,现有研究未能充分考虑电力电子电源暂态快速响应与控制可塑的特点。为此,以GFM-VSC为对象,借助等面积法原理与相平面图法,从能量角度揭示了其暂态响应机制与传统同步机系统的差异,分析了控制塑造下GFM-VSC系统的暂态稳定机理;然后,针对大扰动下易于触发的限幅环节,分析了系统无法自主退出限幅而失稳的机制,并提出了附带电流分配系数的改进限幅策略,有效增强了系统暂态稳定性。最后,通过仿真验证了理论分析与改进方法的正确性。展开更多
This paper presents a unified positive-and negative-sequence dual-dq dynamic model of wind-turbine driven doubly-fed induction generator(DFIG) under unbalanced grid voltage conditions. Strategies for enhanced control ...This paper presents a unified positive-and negative-sequence dual-dq dynamic model of wind-turbine driven doubly-fed induction generator(DFIG) under unbalanced grid voltage conditions. Strategies for enhanced control and operation of a DFIG-used back-to-back(BTB) PWM voltage source converter(VSC) are proposed. The modified control design for the grid-side converter in the stationary αβ frames diminishes the amplitude of DC-link voltage ripples of twice the grid frequency,and the two proposed control targets for the rotor-side converter are alternatively achieved,which,as a result,improve the fault-ride through(FRT) capability of the DFIG based wind power generation systems during unbalanced network supply. A complete unbalanced control scheme with both grid-and rotor-side converters included is designed. Finally,simulation was carried out on a 1.5 MW wind-turbine driven DFIG system and the validity of the developed unified model and the feasibility of the proposed control strategies are all confirmed by the simulated results.展开更多
Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controlle...Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controller based on compensation for unbalanced source voltage and current. With the proposed scheme, the second harmonics of the output current are eliminated and low-order harmonics of the source current are reduced effectively. Simulation and experimental results con- firmed the feasibility of the proposed method.展开更多
To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a ...To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a full bridge LLC resonant converter,three-level half bridge LLC resonant converter,and variable frequency control mode,the converter realizes an intelligent estimation of input voltage by automatically changing its internal cir-cuit topology.Under this control strategy,different input voltages determine different operation modes.This is achieved in full bridge LLC mode when the input voltage is low.If the input voltage rises to a certain level,it operates in three-level half bridge LLC mode.These switches are digital and entirely carried out by the DSP(Digi-tal Signal Processor),which means that an auxiliary circuit is unnecessary,where a simple strategy of software modification can be utilized.Experimental results of a 500W prototype with 100V~600V input voltage and full load efficiency of up to 92%are developed to verify feasibility and practicability.This type of converter is suitable for applications with an ultra-wide input voltage range,such as wind turbines,photovoltaic generators,bioenergy,and other renewable energy sources.展开更多
In medium voltage high power applications,multi-level current source converters(CSCs)are good candidate to increase system power region,reliability,and the quality of output waveforms.Compared with widely researched v...In medium voltage high power applications,multi-level current source converters(CSCs)are good candidate to increase system power region,reliability,and the quality of output waveforms.Compared with widely researched voltage source multi-level converters(MLCs),the current source MLCs have the advantages of inherent short-circuit protection,high power capability and high quality of output current waveforms.The main features of MLCs include reduced harmonics,lower switching frequency and reduced current stress on each device which is a particularly important for high power application with low voltage and high current requirements.This paper conducts a general review of the current research about MLCs in higher power medium voltage application.The different types of parallel structure based MLCs and the modulation methodologies will be introduced and compared.Specifically,the circuit analysis of the common-mode(CM)loop for parallel structures will be conducted,the common-mode voltage(CMV)and circulating current suppression methods developed on the base of multilevel modulations will be addressed.展开更多
The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated fr...The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated from the PV system is erratic and hence there is a need for an efficient converter to perform the extraction of maximum power.An improved interleaved Single-ended Primary Inductor-Converter(SEPIC)converter is employed in proposed work to extricate most of power from renewable source.This proposed converter minimizes ripples,reduces electromagnetic interference due tofilter elements and the contin-uous input current improves the power output of PV panel.A Crow Search Algo-rithm(CSA)based Proportional Integral(PI)controller is utilized for controlling the converter switches effectively by optimizing the parameters of PI controller.The optimized PI controller reduces ripples present in Direct Current(DC)vol-tage,maintains constant voltage at proposed converter output and reduces over-shoots with minimum settling and rise time.This voltage is given to single phase grid via 1�Voltage Source Inverter(VSI).The command pulses of 1�VSI are produced by simple PI controller.The response of the proposed converter is thus improved with less input current.After implementing CSA based PI the efficiency of proposed converter obtained is 96%and the Total Harmonic Distor-tion(THD)is found to be 2:4%.The dynamics and closed loop operation is designed and modeled using MATLAB Simulink tool and its behavior is performed.展开更多
电压源型直流输电(voltage sourced converter-high voltage direct current,VSC-HVDC)具有控制灵活且易于在送受端扩展新落点等优点,有助于新能源的友好接入,因而在新能源基地的直流输电中具有广阔的应用前景。随着柔直送端电网新能源...电压源型直流输电(voltage sourced converter-high voltage direct current,VSC-HVDC)具有控制灵活且易于在送受端扩展新落点等优点,有助于新能源的友好接入,因而在新能源基地的直流输电中具有广阔的应用前景。随着柔直送端电网新能源占比不断增加,导致送端电网系统等效惯量持续降低、调频能力大幅减弱。针对高新能源渗透率的送端电网系统,利用VSC-HVDC对有功功率的独立与快速调节的特点,在传统的定有功功率控制中引入有功功率-频率(P-f)斜率特性,设计反下垂控制策略,使其参与送端交流系统的频率调节。并在PSCAD/EMTDC中搭建两端柔性直流输电电网模型进行仿真验证。结果表明,所提出的控制策略提高了送端系统的频率稳定性,具备一定的有效性与可行性。展开更多
In this paper,to study the power loss of converter for elevator,The analysis is to establish relationship between parameters(current,voltages and losses in the inverter and converter) relevant for sizing of major comp...In this paper,to study the power loss of converter for elevator,The analysis is to establish relationship between parameters(current,voltages and losses in the inverter and converter) relevant for sizing of major components of the drive was done.) For high PWM(pulse width modulation) frequency like in elevator applications of fpwm =10kHz,switching losses are dominant and are about 2/3 of the total losses on IGBT switch.Transition from continuous 3 phase to discontinuous 2 phase PWM results in 50% reduction of switching loses on IGBT devices providing that PWM is not done over 60deg angle in a particular phase when current has maximum value.Total losses on IGBT(conduction + switching) are reduced approximately by ~1/3 what is still a significant reduction.Two phase PWM with reduced losses can be used for applications when acoustic noise due to increased current ripple is not significant and fall back solution to regular 3 phase PWM when drive operates under rare extreme conditions resulting in increased heat sink temperature.The analysis will be examined by further laboratory testing simulating 60% duty cycle on a dynamometer.展开更多
文摘针对构网型变流器(grid-forming voltage source converter,GFM-VSC)系统在大扰动下暂态稳定问题,现有研究未能充分考虑电力电子电源暂态快速响应与控制可塑的特点。为此,以GFM-VSC为对象,借助等面积法原理与相平面图法,从能量角度揭示了其暂态响应机制与传统同步机系统的差异,分析了控制塑造下GFM-VSC系统的暂态稳定机理;然后,针对大扰动下易于触发的限幅环节,分析了系统无法自主退出限幅而失稳的机制,并提出了附带电流分配系数的改进限幅策略,有效增强了系统暂态稳定性。最后,通过仿真验证了理论分析与改进方法的正确性。
基金Project (No. 50577056) supported by the National Natural ScienceFoundation of China
文摘This paper presents a unified positive-and negative-sequence dual-dq dynamic model of wind-turbine driven doubly-fed induction generator(DFIG) under unbalanced grid voltage conditions. Strategies for enhanced control and operation of a DFIG-used back-to-back(BTB) PWM voltage source converter(VSC) are proposed. The modified control design for the grid-side converter in the stationary αβ frames diminishes the amplitude of DC-link voltage ripples of twice the grid frequency,and the two proposed control targets for the rotor-side converter are alternatively achieved,which,as a result,improve the fault-ride through(FRT) capability of the DFIG based wind power generation systems during unbalanced network supply. A complete unbalanced control scheme with both grid-and rotor-side converters included is designed. Finally,simulation was carried out on a 1.5 MW wind-turbine driven DFIG system and the validity of the developed unified model and the feasibility of the proposed control strategies are all confirmed by the simulated results.
基金Project (No. 50477033) supported by the National Nature ScienceFoundation of China
文摘Under unbalanced source voltage supply, considerable output second harmonics and input low-order harmonics in 3-phase PWM current-source converters (PWM-CSC) are generated. This paper proposes a new deadbeat controller based on compensation for unbalanced source voltage and current. With the proposed scheme, the second harmonics of the output current are eliminated and low-order harmonics of the source current are reduced effectively. Simulation and experimental results con- firmed the feasibility of the proposed method.
文摘To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a full bridge LLC resonant converter,three-level half bridge LLC resonant converter,and variable frequency control mode,the converter realizes an intelligent estimation of input voltage by automatically changing its internal cir-cuit topology.Under this control strategy,different input voltages determine different operation modes.This is achieved in full bridge LLC mode when the input voltage is low.If the input voltage rises to a certain level,it operates in three-level half bridge LLC mode.These switches are digital and entirely carried out by the DSP(Digi-tal Signal Processor),which means that an auxiliary circuit is unnecessary,where a simple strategy of software modification can be utilized.Experimental results of a 500W prototype with 100V~600V input voltage and full load efficiency of up to 92%are developed to verify feasibility and practicability.This type of converter is suitable for applications with an ultra-wide input voltage range,such as wind turbines,photovoltaic generators,bioenergy,and other renewable energy sources.
文摘In medium voltage high power applications,multi-level current source converters(CSCs)are good candidate to increase system power region,reliability,and the quality of output waveforms.Compared with widely researched voltage source multi-level converters(MLCs),the current source MLCs have the advantages of inherent short-circuit protection,high power capability and high quality of output current waveforms.The main features of MLCs include reduced harmonics,lower switching frequency and reduced current stress on each device which is a particularly important for high power application with low voltage and high current requirements.This paper conducts a general review of the current research about MLCs in higher power medium voltage application.The different types of parallel structure based MLCs and the modulation methodologies will be introduced and compared.Specifically,the circuit analysis of the common-mode(CM)loop for parallel structures will be conducted,the common-mode voltage(CMV)and circulating current suppression methods developed on the base of multilevel modulations will be addressed.
文摘The generation of electricity based on renewable energy sources,parti-cularly Photovoltaic(PV)system has been greatly increased and it is simply insti-gated for both domestic and commercial uses.The power generated from the PV system is erratic and hence there is a need for an efficient converter to perform the extraction of maximum power.An improved interleaved Single-ended Primary Inductor-Converter(SEPIC)converter is employed in proposed work to extricate most of power from renewable source.This proposed converter minimizes ripples,reduces electromagnetic interference due tofilter elements and the contin-uous input current improves the power output of PV panel.A Crow Search Algo-rithm(CSA)based Proportional Integral(PI)controller is utilized for controlling the converter switches effectively by optimizing the parameters of PI controller.The optimized PI controller reduces ripples present in Direct Current(DC)vol-tage,maintains constant voltage at proposed converter output and reduces over-shoots with minimum settling and rise time.This voltage is given to single phase grid via 1�Voltage Source Inverter(VSI).The command pulses of 1�VSI are produced by simple PI controller.The response of the proposed converter is thus improved with less input current.After implementing CSA based PI the efficiency of proposed converter obtained is 96%and the Total Harmonic Distor-tion(THD)is found to be 2:4%.The dynamics and closed loop operation is designed and modeled using MATLAB Simulink tool and its behavior is performed.
文摘电压源型直流输电(voltage sourced converter-high voltage direct current,VSC-HVDC)具有控制灵活且易于在送受端扩展新落点等优点,有助于新能源的友好接入,因而在新能源基地的直流输电中具有广阔的应用前景。随着柔直送端电网新能源占比不断增加,导致送端电网系统等效惯量持续降低、调频能力大幅减弱。针对高新能源渗透率的送端电网系统,利用VSC-HVDC对有功功率的独立与快速调节的特点,在传统的定有功功率控制中引入有功功率-频率(P-f)斜率特性,设计反下垂控制策略,使其参与送端交流系统的频率调节。并在PSCAD/EMTDC中搭建两端柔性直流输电电网模型进行仿真验证。结果表明,所提出的控制策略提高了送端系统的频率稳定性,具备一定的有效性与可行性。
文摘In this paper,to study the power loss of converter for elevator,The analysis is to establish relationship between parameters(current,voltages and losses in the inverter and converter) relevant for sizing of major components of the drive was done.) For high PWM(pulse width modulation) frequency like in elevator applications of fpwm =10kHz,switching losses are dominant and are about 2/3 of the total losses on IGBT switch.Transition from continuous 3 phase to discontinuous 2 phase PWM results in 50% reduction of switching loses on IGBT devices providing that PWM is not done over 60deg angle in a particular phase when current has maximum value.Total losses on IGBT(conduction + switching) are reduced approximately by ~1/3 what is still a significant reduction.Two phase PWM with reduced losses can be used for applications when acoustic noise due to increased current ripple is not significant and fall back solution to regular 3 phase PWM when drive operates under rare extreme conditions resulting in increased heat sink temperature.The analysis will be examined by further laboratory testing simulating 60% duty cycle on a dynamometer.