Hydrazine oxidation reaction(HzOR)assisted hydrogen evolution reaction(HER)offers a feasible path for low power consumption to hydrogen production.Unfortunately however,the total electrooxidation of hydrazine in anode...Hydrazine oxidation reaction(HzOR)assisted hydrogen evolution reaction(HER)offers a feasible path for low power consumption to hydrogen production.Unfortunately however,the total electrooxidation of hydrazine in anode and the dissociation kinetics of water in cathode are critically depend on the interaction between the reaction intermediates and surface of catalysts,which are still challenging due to the totally different catalytic mechanisms.Herein,the[W–O]group with strong adsorption capacity is introduced into CoP nanoflakes to fabricate bifunctional catalyst,which possesses excellent catalytic performances towards both HER(185.60 mV at 1000 mA cm^(−2))and HzOR(78.99 mV at 10,00 mA cm^(−2))with the overall electrolyzer potential of 1.634 V lower than that of the water splitting system at 100 mA cm^(−2).The introduction of[W–O]groups,working as the adsorption sites for H2O dissociation and N2H4 dehydrogenation,leads to the formation of porous structure on CoP nanoflakes and regulates the electronic structure of Co through the linked O in[W–O]group as well,resultantly boosting the hydrogen production and HzOR.Moreover,a proof-of-concept direct hydrazine fuel cell-powered H_(2) production system has been assembled,realizing H_(2)evolution at a rate of 3.53 mmol cm^(−2)h^(−1)at room temperature without external electricity supply.展开更多
Although hydrophilic membranes are desired for reducing resistance to water permeation, hydrophilic surfaces are not used in the water-in-oil(W/O) membrane emulsification process because water spreads on the hydrophil...Although hydrophilic membranes are desired for reducing resistance to water permeation, hydrophilic surfaces are not used in the water-in-oil(W/O) membrane emulsification process because water spreads on the hydrophilic surface without forming droplets. Here, we report that a hydrophilic ceramic membrane can form a hydrophobic interface in diesel at a higher temperature;interestingly, the experiments show that the contact angle increases when the temperature rises. The hydrophilic membrane surface evolves into a hydrophobic interface, particularly near the boiling point of water, resulting in a water contact angle of 147.5° ± 1.2°. This work established a method for preparing W/O monodispersed emulsions by direct emulsification of hydrophilic ceramic membranes at a temperature close to the boiling point of water.Additionally, it made high flux of membrane emulsification of monodispersed W/O emulsions possible,which satisfied the industrial requirements of fluidized catalytic cracking in the petrochemical industry.展开更多
为探究超声处理大豆分离蛋白-壳聚糖(soybean protein isolate-chitosan,SPI-CS)复合物对形成O/W型乳液性质的影响,主要研究了复合物表面疏水性、乳化活性、乳化稳定性与油-水界面张力、乳液粒径、乳液稳定性之间的关系。结果表明:未经...为探究超声处理大豆分离蛋白-壳聚糖(soybean protein isolate-chitosan,SPI-CS)复合物对形成O/W型乳液性质的影响,主要研究了复合物表面疏水性、乳化活性、乳化稳定性与油-水界面张力、乳液粒径、乳液稳定性之间的关系。结果表明:未经超声处理的SPI-CS复合物表面疏水性、乳化活性、乳化稳定性和界面吸附性较低,形成的O/W型乳液粒径相对较大,约100?μm,乳液Zeta电位较低,乳滴有发生聚集的倾向。乳液贮存7 d后乳层析指数最高。经超声处理后SPI-CS复合物形成的乳状液性质发生明显变化,随着超声功率的增加,形成的O/W型乳液的稳定性有所增加:超声功率为400 W时SPI-CS复合物形成的乳液最为稳定,乳层析指数最低;当超声功率超过400 W时,乳液的光学显微镜观察显示其粒径有所增大,同时乳液的Zeta电位、乳化活性和乳化稳定性明显下降,界面张力降低缓慢。超声处理暴露了蛋白质分子的内部结构,使部分结构展开、柔性增加,促进了其与壳聚糖之间的静电相互作用,说明超声处理的大豆分离蛋白与壳聚糖形成的复合物影响了O/W型乳液的稳定性及相关性质。展开更多
The stabilizing conditions of W/O microemulsion of Tx 6～C 4H 9OH/c C 6H 12 /H 2O system were studied by visual observation and electrical conductance.The result shows that when the weight ratio of Tx 6 and C 4H 9OH i...The stabilizing conditions of W/O microemulsion of Tx 6～C 4H 9OH/c C 6H 12 /H 2O system were studied by visual observation and electrical conductance.The result shows that when the weight ratio of Tx 6 and C 4H 9OH is 4∶1,the W/O microemulsion sytem has stabilizing and extensive regions,and the system is insensitive to the values of pH at room temperature.In accordance with the theoretical value of HLB,the suitable value of HLB for Tx 6 and C 4H 9OH to compose microemulsion is greater than 9,less than or equal to 10.展开更多
基金support of this research by National Natural Science Foundation of China(52172110)Key Research Program of Frontier Sciences,Chinese Academy of Sciences(ZDBS-LY-SLH029)+1 种基金the“Scientific and Technical Innovation Action Plan”Hong Kong,Macao and Taiwan Science&Technology Cooperation Project of Shanghai Science and Technology Committee(21520760500)BL14W1 beamline of Shanghai Synchrotron Radiation Facility(SSRF).
文摘Hydrazine oxidation reaction(HzOR)assisted hydrogen evolution reaction(HER)offers a feasible path for low power consumption to hydrogen production.Unfortunately however,the total electrooxidation of hydrazine in anode and the dissociation kinetics of water in cathode are critically depend on the interaction between the reaction intermediates and surface of catalysts,which are still challenging due to the totally different catalytic mechanisms.Herein,the[W–O]group with strong adsorption capacity is introduced into CoP nanoflakes to fabricate bifunctional catalyst,which possesses excellent catalytic performances towards both HER(185.60 mV at 1000 mA cm^(−2))and HzOR(78.99 mV at 10,00 mA cm^(−2))with the overall electrolyzer potential of 1.634 V lower than that of the water splitting system at 100 mA cm^(−2).The introduction of[W–O]groups,working as the adsorption sites for H2O dissociation and N2H4 dehydrogenation,leads to the formation of porous structure on CoP nanoflakes and regulates the electronic structure of Co through the linked O in[W–O]group as well,resultantly boosting the hydrogen production and HzOR.Moreover,a proof-of-concept direct hydrazine fuel cell-powered H_(2) production system has been assembled,realizing H_(2)evolution at a rate of 3.53 mmol cm^(−2)h^(−1)at room temperature without external electricity supply.
基金the support from the National Key Research and Development Program of China (2021YFB3801303)the National Natural Science Foundation of China (21838005, 21921006)the Key Scientific Research and Development Projects of Jiangsu Province (BE201800901)。
文摘Although hydrophilic membranes are desired for reducing resistance to water permeation, hydrophilic surfaces are not used in the water-in-oil(W/O) membrane emulsification process because water spreads on the hydrophilic surface without forming droplets. Here, we report that a hydrophilic ceramic membrane can form a hydrophobic interface in diesel at a higher temperature;interestingly, the experiments show that the contact angle increases when the temperature rises. The hydrophilic membrane surface evolves into a hydrophobic interface, particularly near the boiling point of water, resulting in a water contact angle of 147.5° ± 1.2°. This work established a method for preparing W/O monodispersed emulsions by direct emulsification of hydrophilic ceramic membranes at a temperature close to the boiling point of water.Additionally, it made high flux of membrane emulsification of monodispersed W/O emulsions possible,which satisfied the industrial requirements of fluidized catalytic cracking in the petrochemical industry.
文摘The stabilizing conditions of W/O microemulsion of Tx 6～C 4H 9OH/c C 6H 12 /H 2O system were studied by visual observation and electrical conductance.The result shows that when the weight ratio of Tx 6 and C 4H 9OH is 4∶1,the W/O microemulsion sytem has stabilizing and extensive regions,and the system is insensitive to the values of pH at room temperature.In accordance with the theoretical value of HLB,the suitable value of HLB for Tx 6 and C 4H 9OH to compose microemulsion is greater than 9,less than or equal to 10.
