To investigate the relationship between surface currents and wave distributions in typhoons,we took the Typhoon Talim in 2017 as a case,and found that the track of the typhoon winds up to 50 m/s was almost consistent ...To investigate the relationship between surface currents and wave distributions in typhoons,we took the Typhoon Talim in 2017 as a case,and found that the track of the typhoon winds up to 50 m/s was almost consistent with the Kuroshio track,particularly from September 13 to 16,2017.The surface current data,derived from the NCEP Climate Forecast System Version 2(CFSv2)from the National Center of Atmospheric Research(NCAR),revealed that the speed of the wind-induced current exceeded that of the Kuroshio in the region with the maximum wind speed.In this study,was utilized a third-generation numeric wave model,WAVEWATCH-Ⅲ(the latest version 5.16),developed by the National Oceanic and Atmospheric Administration(NOAA),to simulate the wave fields of Typhoon Talim using the European Centre for Medium-Range Weather Forecasts(ECMWF)reanalysis wind data in 0.125°×0.125°grid as the forcing field.We found that the root-mean-square error(RMSE)of the significant wave height(SWH)was 0.34 m when validated against measurements from altimeter Jason-2.In addition,we discovered that the SWH had a similar tendency to the change in the surface current speed that was approximately 0.5 m/s at the beginning of Typhoon Talim.However,the relationship became weak as the surface current speed was below 0.2 m/s.Our findings show that the distribution of typhoon waves is resulted from the interaction of surface current and the wind-sea portion of the wave system,since the distribution pattern of wind-sea is consistent with the surface current,and there is a weak relationship between surface current and swell.展开更多
To explore the kinetic adsorption under continuous and nonequilibrium states, an integration of continuous measurement and adsorption platform kinetics method was proposed, which was initially called the ICM-AP kineti...To explore the kinetic adsorption under continuous and nonequilibrium states, an integration of continuous measurement and adsorption platform kinetics method was proposed, which was initially called the ICM-AP kinetics method, and a corresponding kinetic adsorption experimental method was developed. Adsorption experiments of europium(Eu) on Ca-bentonite,Na-bentonite, and the D231 cation exchange resin were performed using the ICM-AP kinetics method and continuous measurements. Because the kinetic experimental results observed in this study were different from those of traditional batch adsorption data, pseudo-first-order or pseudo-second-order kinetic models were unsuitable for fitting the experimental data.Hence, a liquid membrane diffusion(LMD) model was developed based on the assumption of simultaneous adsorption/desorption to discuss the mechanism of kinetic adsorption. The kinetic adsorption mechanism was also studied by using XPS.The results indicated that the proposed adsorption model can fit the experimental data more suitably, and the adsorption/desorption behaviors of Eu on bentonite and the D231 resin were simultaneously observed, suggesting that the adsorption kinetics of Eu(Ⅲ) was mainly dominated by hydrated Eu(Ⅲ) ions on the liquid membrane.展开更多
In this study, we simulated typhoon waves in the shallow waters around the Zhoushan Islands using the WaveWatch-Ⅲ(WW3) model version 5.16, the latest version released by the National Oceanic and Atmospheric Administr...In this study, we simulated typhoon waves in the shallow waters around the Zhoushan Islands using the WaveWatch-Ⅲ(WW3) model version 5.16, the latest version released by the National Oceanic and Atmospheric Administration. Specifically, we used in-situ measurements to evaluate the performance of seven packages of input/dissipation source terms in the WW3 model. We forced the WW3 model by wind fields derived from a combination of the parametric Holland model and high-resolution European Center for Medium-Range Weather Forecasts(ECMWF) wind data in a 0.125? grid, herein called H-E winds. We trained the H-E winds by fitting a shape parameter B to buoy-measured observations, which resulted in a smallest root mean square error(RMSE) of 3 m s^(-1) for B, when treated as a constant 0.4. Then, we applied the seven input/dissipation terms of WW3, labelled ST1, ST2, ST2+STAB2, ST3, ST3+STAB3, ST4, and ST6, to simulate the significant wave height(SWH) up to 5 m during typhoons Fungwong and Chan-hom around the Zhoushan Islands. We then compared the SWHs of the simulated waves with those measured by the in-situ buoys. The results indicate that the simulation using ST2 performs best with an RMSE of 0.79 m for typhoon Fung-wong and an RMSE of 1.12 m for typhoon Chan-hom. Interestingly, we found the simulated SWH results to be relatively higher than those of the observations in the area between Hangzhou Bay and the Zhoushan Islands. This behavior is worthy of further investigation in the future.展开更多
Results of drag coefficient（CD） from field observations and laboratory wave tank experiments indicate that the operational wave model can overestimate wind energy input under high wind conditions. The wind-wave inte...Results of drag coefficient（CD） from field observations and laboratory wave tank experiments indicate that the operational wave model can overestimate wind energy input under high wind conditions. The wind-wave interaction source term in WAVEWATCH Ⅲ has been modified to examine its behavior with tropical cyclone wind forcing. Using high resolution wind input,numerical experiments under idealized wind field and tropical cyclone Bonnie（1998） were designed to evaluate performance of the modified models. Both experiments indicate that the modified models with reduced CD significantly decrease wind energy input into the wave model and then simulate lower significant wave height（SWH） than the original model. However,the effects on spatial distribution of SWH,mean wavelength,mean wave direction,and directional wave spectra are insignificant. Due to the reduced wind energy input,the idealized experiment shows that the modified models simulate lower SWH than the original model in all four quadrants. The decrease in the front quadrants is significantly larger than that in the rear quadrants;it is larger under higher winds than lower winds. The realistic experiment on tropical cyclone Bonnie shows that the modified model with the various downward trends of CD in high winds creates a simulation that agrees best with scanning radar altimeter observations.展开更多
基金Supported by the Fundamental Research Funds for Zhejiang Provincial Universities and Research Institutes(No.2019J00010)the National Key Research and Development Program of China(No.2017YFA0604901)+2 种基金the National Natural Science Foundation of China(Nos.41806005,41776183,41706206)the Public Welfare Technical Applied Research Project of Zhejiang Province of China(No.LGF19D060003)the Science and Technology Project of Zhoushan City(No.2019C21008)。
文摘To investigate the relationship between surface currents and wave distributions in typhoons,we took the Typhoon Talim in 2017 as a case,and found that the track of the typhoon winds up to 50 m/s was almost consistent with the Kuroshio track,particularly from September 13 to 16,2017.The surface current data,derived from the NCEP Climate Forecast System Version 2(CFSv2)from the National Center of Atmospheric Research(NCAR),revealed that the speed of the wind-induced current exceeded that of the Kuroshio in the region with the maximum wind speed.In this study,was utilized a third-generation numeric wave model,WAVEWATCH-Ⅲ(the latest version 5.16),developed by the National Oceanic and Atmospheric Administration(NOAA),to simulate the wave fields of Typhoon Talim using the European Centre for Medium-Range Weather Forecasts(ECMWF)reanalysis wind data in 0.125°×0.125°grid as the forcing field.We found that the root-mean-square error(RMSE)of the significant wave height(SWH)was 0.34 m when validated against measurements from altimeter Jason-2.In addition,we discovered that the SWH had a similar tendency to the change in the surface current speed that was approximately 0.5 m/s at the beginning of Typhoon Talim.However,the relationship became weak as the surface current speed was below 0.2 m/s.Our findings show that the distribution of typhoon waves is resulted from the interaction of surface current and the wind-sea portion of the wave system,since the distribution pattern of wind-sea is consistent with the surface current,and there is a weak relationship between surface current and swell.
基金This work was supported by the Natural Science Foundation of the Jiangxi Province,China(No.20202BABL203004)Opening Project of the State Key Laboratory of Nuclear Resources and Environment(East China University of Technology)(No.2022NRE23)Opening Project of the Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices(No.PMND202101).
文摘To explore the kinetic adsorption under continuous and nonequilibrium states, an integration of continuous measurement and adsorption platform kinetics method was proposed, which was initially called the ICM-AP kinetics method, and a corresponding kinetic adsorption experimental method was developed. Adsorption experiments of europium(Eu) on Ca-bentonite,Na-bentonite, and the D231 cation exchange resin were performed using the ICM-AP kinetics method and continuous measurements. Because the kinetic experimental results observed in this study were different from those of traditional batch adsorption data, pseudo-first-order or pseudo-second-order kinetic models were unsuitable for fitting the experimental data.Hence, a liquid membrane diffusion(LMD) model was developed based on the assumption of simultaneous adsorption/desorption to discuss the mechanism of kinetic adsorption. The kinetic adsorption mechanism was also studied by using XPS.The results indicated that the proposed adsorption model can fit the experimental data more suitably, and the adsorption/desorption behaviors of Eu on bentonite and the D231 resin were simultaneously observed, suggesting that the adsorption kinetics of Eu(Ⅲ) was mainly dominated by hydrated Eu(Ⅲ) ions on the liquid membrane.
基金partly supported by the National Key Research and Development Program of China under contract (Nos. 2017YFA0604901, 2016YFC 1401002 and 2016YFC1402000)the National Natural Science Foundation of China under contract (Nos. 41776 183, 41606024 and 41506033)
文摘In this study, we simulated typhoon waves in the shallow waters around the Zhoushan Islands using the WaveWatch-Ⅲ(WW3) model version 5.16, the latest version released by the National Oceanic and Atmospheric Administration. Specifically, we used in-situ measurements to evaluate the performance of seven packages of input/dissipation source terms in the WW3 model. We forced the WW3 model by wind fields derived from a combination of the parametric Holland model and high-resolution European Center for Medium-Range Weather Forecasts(ECMWF) wind data in a 0.125? grid, herein called H-E winds. We trained the H-E winds by fitting a shape parameter B to buoy-measured observations, which resulted in a smallest root mean square error(RMSE) of 3 m s^(-1) for B, when treated as a constant 0.4. Then, we applied the seven input/dissipation terms of WW3, labelled ST1, ST2, ST2+STAB2, ST3, ST3+STAB3, ST4, and ST6, to simulate the significant wave height(SWH) up to 5 m during typhoons Fungwong and Chan-hom around the Zhoushan Islands. We then compared the SWHs of the simulated waves with those measured by the in-situ buoys. The results indicate that the simulation using ST2 performs best with an RMSE of 0.79 m for typhoon Fung-wong and an RMSE of 1.12 m for typhoon Chan-hom. Interestingly, we found the simulated SWH results to be relatively higher than those of the observations in the area between Hangzhou Bay and the Zhoushan Islands. This behavior is worthy of further investigation in the future.
基金The National Natural Science Foundation of China under contract No. 40706008the Open Research Program of the Key Laboratory of Chinese Acadeing of Sciences for Tropical Marine Environmental Dynamics under contract No. LED0606+1 种基金the Shandong Province Natural Science Foundation of China under contract No. Z2008E02the National High Technology Research and Development Program ("863" Program) of China under contract No. 2008AA09A402
文摘Results of drag coefficient（CD） from field observations and laboratory wave tank experiments indicate that the operational wave model can overestimate wind energy input under high wind conditions. The wind-wave interaction source term in WAVEWATCH Ⅲ has been modified to examine its behavior with tropical cyclone wind forcing. Using high resolution wind input,numerical experiments under idealized wind field and tropical cyclone Bonnie（1998） were designed to evaluate performance of the modified models. Both experiments indicate that the modified models with reduced CD significantly decrease wind energy input into the wave model and then simulate lower significant wave height（SWH） than the original model. However,the effects on spatial distribution of SWH,mean wavelength,mean wave direction,and directional wave spectra are insignificant. Due to the reduced wind energy input,the idealized experiment shows that the modified models simulate lower SWH than the original model in all four quadrants. The decrease in the front quadrants is significantly larger than that in the rear quadrants;it is larger under higher winds than lower winds. The realistic experiment on tropical cyclone Bonnie shows that the modified model with the various downward trends of CD in high winds creates a simulation that agrees best with scanning radar altimeter observations.
