In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distributi...In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distribution of nanocrystalline WC-10Co composite powder and the sintered specimens prepared by SPS plus HIP and by vacuum sintering plus HIP by means of atomic force microscopy （AFM）. The mechanical properties of the sintered specimens were also investigated. It is very easy to find cobalt lakes in the specimen prepared by vacuum sintering plus HIP process. But the microstructure of the specimen prepared by SPS plus HIP is more homogeneous, and the grain size is smaller than that prepared by vacuum sintering plus HIP. The WC-10Co ultrafine cemented carbide consolidated by SPS plus HIP can reach a relative density of 99.4%, and the transverse rupture strength （TRS） is higher than 3540 MPa, the Rockwell A hardness （HRA） is higher than 92.8, the average grain size is smaller than 300 nm, and the WC-10Co ultrafine cemented carbide with excellent properties is achieved. The specimen prepared by SPS with HIP has better properties and microstructure than that prepared by vacuum sintering with HIP.展开更多
WC-10Co nanocrystalline composite powders prepared by spray pyrogenation-continuous reduction and carburization technology were consolidated by vacuum sintering plus hot isostatic pressing （HIP）. Influences of carbo...WC-10Co nanocrystalline composite powders prepared by spray pyrogenation-continuous reduction and carburization technology were consolidated by vacuum sintering plus hot isostatic pressing （HIP）. Influences of carbon content on properties and microstructure of ultrafine WC-10Co cemented carbide were investigated. The results show that the relative density of the ultrafine WC-10Co cemented carbides can reach 99.72%, and the transverse rupture strength （TRS） was higher than 3 890 MPa, Rockwell A hardness （HRA） was higher than 92.5, the average grain size was less than 460 nm, when carbon content in nanocrystalline composite powder was 5.54wt% and the ball-milled time was 48 hours, ultrafine WC-10Co cemented carbide with excellent properties and homogeneous microstructure was obtained.展开更多
Mg85Zn5Ni10 ternary alloy was synthesized through vacuum induction melting for the first time.Phase compositions and microstructures of Mg85Zn5Ni10 alloy powders were analyzed by X-ray diffraction (XRD)and scanning el...Mg85Zn5Ni10 ternary alloy was synthesized through vacuum induction melting for the first time.Phase compositions and microstructures of Mg85Zn5Ni10 alloy powders were analyzed by X-ray diffraction (XRD)and scanning electron micro- scopy (SEM).By utilizing a Sieverts apparatus,the hydrogenation and dehydrogenation properties of Mg85Zn5Ni10 powders were measured systematically.XRD and SEM results indicated that the Mg85Zn5Ni10 alloy powders contained the major phase Mg,the eutectic Mg-Mg2Ni and Mg-MgZn2 mixtures.The possible reaction pathway can be inferred as follows:Mg +Mg2Ni +MgZn2 +H2←→MgH2+Mg2NiH4 +MgZn2,indicating that MgZn2 did not react with H2. After activation,the Mg85Zn5Ni10 alloy powders could absorb 5.4 wt.% hydrogen reversibly and held an excellent hydrogenation kinetics at a relatively low temperature.At 360 ℃,the alloy powders desorbed 5.351 wt.% hydrogen in 264 s.However,it only had fast dehydrogenation kinetics above 300 ℃.The existence of MgZn2 contributed to improving the kinetic properties.During the hydriding and dehydriding,the formed cracks and defects promoted the kinetics and thermodynamic properties.The activation energy for dehydrogenation was 75.514 kJ/mol.The enthalpy change values of hydrogenation and dehydrogenation were calculated to be -73.064 kJ/mol and 76.674 kJ/mol,respectively,indicating that melting with Ni and Zn could improve the thermodynamic property of Mg slightly.展开更多
基金This work was financially supported by the Postdoctoral Science Foundation of China (No.2003034504),the Open Foundation ofState Key Laboratory of Advanced Technology for Materials Synthesis & Processing, Wuhan University of Technology (2004-2005)and the National High-Tech Research and Development Program of China (No.2002AA302504).
文摘In order to compare the spark plasma sintedng （SPS） process plus hot isostatic press （HIP） with vacuum sintedng plus HIP, an investigation was carried out on the topography, microstructure and gain size distribution of nanocrystalline WC-10Co composite powder and the sintered specimens prepared by SPS plus HIP and by vacuum sintering plus HIP by means of atomic force microscopy （AFM）. The mechanical properties of the sintered specimens were also investigated. It is very easy to find cobalt lakes in the specimen prepared by vacuum sintering plus HIP process. But the microstructure of the specimen prepared by SPS plus HIP is more homogeneous, and the grain size is smaller than that prepared by vacuum sintering plus HIP. The WC-10Co ultrafine cemented carbide consolidated by SPS plus HIP can reach a relative density of 99.4%, and the transverse rupture strength （TRS） is higher than 3540 MPa, the Rockwell A hardness （HRA） is higher than 92.8, the average grain size is smaller than 300 nm, and the WC-10Co ultrafine cemented carbide with excellent properties is achieved. The specimen prepared by SPS with HIP has better properties and microstructure than that prepared by vacuum sintering with HIP.
基金the National Natural Science Foundation of China (No.50502026)the Youth Science Plan for Light of the Morning Sun of Wuhan City(No.200750731270)Key Project for the Science & Technology Research Department,Chinese Ministry of Education (No.105123)
文摘WC-10Co nanocrystalline composite powders prepared by spray pyrogenation-continuous reduction and carburization technology were consolidated by vacuum sintering plus hot isostatic pressing （HIP）. Influences of carbon content on properties and microstructure of ultrafine WC-10Co cemented carbide were investigated. The results show that the relative density of the ultrafine WC-10Co cemented carbides can reach 99.72%, and the transverse rupture strength （TRS） was higher than 3 890 MPa, Rockwell A hardness （HRA） was higher than 92.5, the average grain size was less than 460 nm, when carbon content in nanocrystalline composite powder was 5.54wt% and the ball-milled time was 48 hours, ultrafine WC-10Co cemented carbide with excellent properties and homogeneous microstructure was obtained.
基金National Natural Science Foundations of China (51761032,51471054 and 51871125).
文摘Mg85Zn5Ni10 ternary alloy was synthesized through vacuum induction melting for the first time.Phase compositions and microstructures of Mg85Zn5Ni10 alloy powders were analyzed by X-ray diffraction (XRD)and scanning electron micro- scopy (SEM).By utilizing a Sieverts apparatus,the hydrogenation and dehydrogenation properties of Mg85Zn5Ni10 powders were measured systematically.XRD and SEM results indicated that the Mg85Zn5Ni10 alloy powders contained the major phase Mg,the eutectic Mg-Mg2Ni and Mg-MgZn2 mixtures.The possible reaction pathway can be inferred as follows:Mg +Mg2Ni +MgZn2 +H2←→MgH2+Mg2NiH4 +MgZn2,indicating that MgZn2 did not react with H2. After activation,the Mg85Zn5Ni10 alloy powders could absorb 5.4 wt.% hydrogen reversibly and held an excellent hydrogenation kinetics at a relatively low temperature.At 360 ℃,the alloy powders desorbed 5.351 wt.% hydrogen in 264 s.However,it only had fast dehydrogenation kinetics above 300 ℃.The existence of MgZn2 contributed to improving the kinetic properties.During the hydriding and dehydriding,the formed cracks and defects promoted the kinetics and thermodynamic properties.The activation energy for dehydrogenation was 75.514 kJ/mol.The enthalpy change values of hydrogenation and dehydrogenation were calculated to be -73.064 kJ/mol and 76.674 kJ/mol,respectively,indicating that melting with Ni and Zn could improve the thermodynamic property of Mg slightly.
