期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Manufacture of the Ultrafine Grain WC/Co Cemented Carbides by Combined Sintering Processing
1
作者 Binghai Liu Yue Zhang +1 位作者 Shixi Ouyang Qikai Li(Institute of Technical Physics and Chemistry, East China University of Science and Technology , Shanghai 200237, China)(Material Science and Engineering School. University of Science and Technology Beijing, Beijing 100083, China)(State Key Laboratory for Synthesis and Processing of Advanced Materials. Wuhan University of Science and Technology, Wuhan 430070, China,) 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 1999年第3期208-213,共6页
A new kind of sintering process, combined sintering process. i.e. vacuum sintering plus hot isolate pressure sintering (HIP), was introduced for producing ultrafine WC-10% Co (mass fraction. so as the follows) cemen... A new kind of sintering process, combined sintering process. i.e. vacuum sintering plus hot isolate pressure sintering (HIP), was introduced for producing ultrafine WC-10% Co (mass fraction. so as the follows) cemented carbides. The effects of some processing parameters on the microstructure and mechanical properties of the obtained cemented carbides were studied. The results show that the rapid shrinkage and the pronounced densification of tile cemented carbides took place during the vacuum sintering stage, which is intinaately correlated with the local liquid sintering occurred during this earl} sintering stage for the high surface activity of ultrafine WC-Co powder. The way of high pressure imposing. isothermal treatment cycle during ac.acuum sintering and HIP sintering stage directly influence the densitication of compacts and the mechanical properties of the produced WC-10%Co cemented carbides. 展开更多
关键词 ultrafine wc-co cemented carbides vacuum sintering HIP sintering
下载PDF
含板状WC晶粒硬质合金制备方法的研究 被引量:14
2
作者 吴恩熙 汪秀全 +1 位作者 曾青 陈力 《硬质合金》 CAS 北大核心 2006年第2期75-78,共4页
以市售W粉,Co粉和石墨粉末为原料,采用普通工艺制取WC-12wt%Co合金。合金显微组织正常,含有大量板状WC晶粒。研究表明,使用板状W颗粒粉末、提高烧结温度和延长烧结时间都有助于合金中板状WC晶粒的形成。
关键词 板状WC晶粒 硬质合金 真空烧结
原文传递
超细晶料WC—Co硬质合金的剪切模压成型工艺 被引量:5
3
作者 刘兵海 张跃 +1 位作者 欧阳世翕 古宏晨 《硬质合金》 CAS 1999年第1期19-24,共6页
采用剪切模压新工艺成型,通过真空烧结制备出了超细晶粒WC-Co硬质合金。研究了不同成型剂的特性、成型剂的配比、加入量以及压制力对剪切模压成型的影响。研究结果表明,采厅剪切模压成型工艺可获得很高的成型质量,从而制备出具有较... 采用剪切模压新工艺成型,通过真空烧结制备出了超细晶粒WC-Co硬质合金。研究了不同成型剂的特性、成型剂的配比、加入量以及压制力对剪切模压成型的影响。研究结果表明,采厅剪切模压成型工艺可获得很高的成型质量,从而制备出具有较好物理力学性能的超细WC—C。因质合金。 展开更多
关键词 硬质合金 剪切模压成型 真空烧结 超细晶粒
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部