A Distributed Routing and Wavelength Assignment Algorithm for Online Multicast in All-Optical WDM Networks

Routing and wavelength assignment for online real-time multicast connection setup is a difficult task due to the dynamic change of availabilities of wavelengths on links and the consideration of wavelength conversion delay in WDM networks. This paper presents a distributed routing and wavelength assignment scheme for the setup of real-time multicast connections. It integrates routing and wavelength assignment as a single process, which greatly reduces the connection setup time. The proposed routing method is based on the Prim’s MST (Minimum Spanning Tree) algorithm and the K-restricted breadth-first search method, which can produce a sub-minimal cost tree under a given delay bound. The wave-length assignment uses the least-conversion and load balancing strategies. Simulation results show that the proposed algorithm is suitable for online multicast connection establishment in WDM networks.

Equilibrium Analysis for Anycast in WDM Networks

In this paper, the wavelength-routed WDM network was analyzed for the dynamic case where the arrival of anycast requests was modeled by a state-dependent Poisson process. The equilibrium analysis was also given with the UWNC algorithm.

A Subsection Shared Restoration Method for Long-Haul WDM Networks

A novel restoration scheme, Parted Path Shared Restoration (PPSR), was proposed. The major idea of PPSR is the strategy of ‘parted disposal’. PPSR keeps the advantage of Path Based Shared Restoration (PBSR) in utilization of capacity. In addition, the restoration time of PPSR is much less than that of PBSR. Furthermore, a satisfaction function was proposed to estimate the performance of PPSR. This function takes the utilization of capacity and restoration time into a harmonious and uniform frame. Through theoretical analysis and computer simulation, the performance of PPSR was demonstrated.

FAIRNESS OF SHARING PROTECTION FOR MULTICAST IN WDM NETWORKS

In this paper,the sharing schemes of multicast in survivable Wavelength-Division Multi-plexed(WDM) networks are studied and the concept of Shared Risk Link Group(SRLG) is considered.While the network resources are shared by the backup paths,the sharing way is possible to make the backup paths selfish.This selfishness leads the redundant hops of the backup route and a large number of primary lightpaths to share one backup link.The sharing schemes,especially,the self-sharing and cross-sharing,are investigated to avoid the selfishness when computing the backup light-tree.In order to decrease the selfishness of the backup paths,it is important to make the sharing links fair to be used.There is a trade-off between the self-sharing and cross-sharing,which is adjusted through simulation to adapt the sharing degree of each sharing scheme and save the network resources.

A Novel Offline PLI-RWA and Hybrid Node Architecture for Zero Blocking and Time Delay Reduction in Translucent Optical WDM Networks

In this paper, we contrive a model that underpins the offline Physical Layer Impairment-Routing and Wavelength Assignment (PLI-RWA) issue in translucent networks. We introduce an innovative PLI-Signal Quality Aware RWA (PLI-SQARWA) algorithm that (a) guarantees zero blocking due to signal degradation and wavelength contention and (b) aims at minimizing the total required number of network components i.e. regenerators and all-optical wavelength converters (AOWCs). Further, in view of reducing the time delay due to optical-electrical-optical (OEO) conversions, we propose a novel electro-optical hybrid translucent node architecture. We show that PLI-SQARWA outperforms a recent heuristic for RWA and regenerator placement (RP) in terms of capital expenditure (CapEx) and time delay;while demonstrating superior blocking performance at all traffic loads. In addition, at high traffic loads, PLI-SQARWA also starts to provision savings on operational expenditure (OpEx). We proceed to the performance comparison of network equipped with the proposed hybrid node and existing translucent and transparent node architectures. The results clearly show that use of the hybrid node incurs less time delay at a similar blocking performance shown by nodes which use OEO conversion for both, regeneration and/or wavelength conversion. The results presented also highlight the significance of equipping the PLI-RWA routing phase with signal quality awareness in order to reduce the network component count and the use of AOWCs to minimize time delay due to OEO conversions.

Blocking Probability in All-Optical WDM Network Using IMCA

The analysis of WDM (Wavelength-Division Multiplexing) optical network is essential to have the routed wavelength blocking probability with the conversion of wavelength using techniques. In this paper, an enhanced analytical model is proposed to evaluate the blocking performances in topology network and to improve the performances of reduction of blocking probability. The variation of probability is based on the wavelength and load used in the network. The conversion is carried out with the support of optical backbone of the inherent flexibility of the network using the proposed IMCA in Sparse-Partial Wavelength Conversion (SPWC) architecture. It reduces the number of converters significantly with efficient process and provides placement scheme of wavelength converters in the network. The proposed model utilizes the network with the assignment and routing of wavelength using dynamic process of assignment algorithm. The proposed model provides dynamic and static routing process with the range limit to have a minimum conversion for the same probabilities of blocking. The proposed system analysis and the simulation results show the better performances in faster coverage, minimum number of conversions, blocking probability improvement for high load.

Impact of Channel Dynamics, Combined Nonlinearities and ASE Noise on Transmission Performance of all Optical Star WDM Networks

For all optical Wavelength Division Multiplexing (WDM) network based on G.653 fibers, we investigate the quality factor deterioration due to combined nonlinear effects and Amplified spontaneous emission (ASE) noise for system parameters based on ITU-T Recommendation G.692. The investigation: (a) emphasizes on stimulated Raman scattering (SRS) and four wave mixing (FWM) effects which are the dominant nonlinearities known to limit WDM system performance and (b) accounts for beating between nonlinearities and beating between ASE noise and nonlinearities. Using the proposed model, performance of the worst affected channels due to SRS and FWM is compared and the results indicate that the worst affected channel due to SRS performs better and hence must be preferred for reliable and efficient transmission over the worst affected channel due to FWM. Further, the results suggest that to achieve a desired error rate (quality factor);there exists an optimal value of channel spacing for a given number of channels. The proposed theoretical model is also validated through extensive simulations over Rsoft OptSimTM simulator and the two sets of results are found to match, indicating that the proposed model accurately calculates the quality factor of the all optical WDM network.

Performance Monitoring in Transparent Reconfigurable WDM Networks

This paper classifies and surveys different approaches proposed for performance monitoring, in particular the optical signal-to-noise ratio (OSNR) monitoring, in transparent reconfigurable WDM networks. Some considerations for future monitoring schemes are discussed.

Reconfiguring the Logical Topology With Performance Guarantees in WDM Networks

To improve the network performance after traffic demand changes, reconfiguring the logical topology is necessary. We present an ILP algorithm to find out the least lightpath changes needed with guaranteed network performance.

Flexible Twin Open Ring Metro WDM Network

We have demonstrated a flexible twin open ring WDM network for metro applications. A pair of optical switches in the network keeps the fiber rings open to prevent signal circulation. Traffics are broadcast to every node and selected at the receiving side. Superior transmission and protection switching are proved.

Network coding based all-optical multicast in WDM networks

Wavelength division multiplexing （WDM） has been becoming a promising solution to meet the rapidly growing demands on bandwidth. Multicast in WDM networks by employing free wavelength is an efficient approach to saving bandwidth and cost. However, the free wavelength may not identical between different hops in a multicast light-path, particularly in heavy load optical WDM networks. In order to implement multicast applications efficiently, a network coding （NC） technique was introduced into all-optical WDM multicast networks to solve wavelength collision problem between the multicast request and the unicast request. Compared with the wavelength conversion based optical multicast, the network coding based optical multicast can achieve better multicast performance with paying lower cost.

Integrated Differentiated Survivability in IP over WDM Networks

The problem of differentiated Multi-Layer Integrated Survivability (MLIS) in IP over WDM networks is studied, which is decomposed into three sub-problems: survivable strategies design (SSD), spare capacity dimensioning (SCID), and dynamic survivable routing (DSR). A related work of network survivability in IP over WDM networks is firstly provided, and adaptive survivable strategies are also designed. A new Integrated Shared Pool (ISP) approach for SCD is then proposed, which is formulated by using integer-programming theory. Moreover, a novel survivable routing scheme called Differentiated Integrated Survivability Algorithm (DISA) for DSR is developed. Simulation results show that the proposed integrated survivability scheme performs much better than other solutions (e,g., 'highest layer recovery' and 'lowest layer recovery' schemes) in terms of traffic blocking ratio, spare resource requirement, and average traffic recovery ratio in IP over WDM networks.

Optical Fiber Devices in WDM Networks

Crystal optics and fiber grating technology are two of the most important optical fiber device technologies. In this paper, we report several new devices developed in Accelink for WDM networks application.

On the Performance of MLR Optical WDM Network Based on ITU-T Conforming Fibers in the Presence of Dominant Physical Layer Impairments

The tremendous and consistent increase in the volume and heterogeneity of traffic has resulted in major innovations in the telecommunication networks.In regard to the optical networks,existing studies have shown that by adopting a mixed line rate(MLR)strategy,the wavelength division multiplexed optical networks can cost-effectively respond to the diverse variety of traffic requirements which have heterogeneous service demands.Unlike existing studies which focus on various MLR network issues by considering deployment of the standard single mode fiber only within the network,in the current work,we investigate the signal quality deterioration due to the combined effects of dominant physical layer impairments for an MLR optical network conforming to the various ITU-T compliant fibers and also considering the optical frequency grid based on ITU-T Recommendation G.692.The main aim of our current study is to identify,for a given fiber,the modulation format configuration which provides the highest performance.We conduct extensive simulations on the considered MLR system using the obtained optimum channel spacing values between the single and mixed line rates.Our results show that the existence of 10 Gbit/s line rate has a detrimental effect on the 40 Gbit/s and/or 100 Gbit/s line rate;however,the 40 Gbit/s and/or 100 Gbit/s line rate’s effect on a 10 Gbit/s line rate is not so detrimental,as well as between the similar line rates.Overall,our results clearly show that choice of the line rate of both,the central channel and its adjacent channels,has a major effect on the MLR network performance.

Light-Path Provis ioning of the WDM Optical Networks

Provisioning of the WDM optical networks has been a challenge problem because it involves both the physical topology and the logical topology. In addition, the stochastic effects of the traffic mix must be properly characterized. This paper proposes a generic light-path provisioning model and suggests a solution procedure based on a recent mathematical achievement. A case study is also reported.

Network Capacity Analysis of Server Version WDM Optical Networks

In this paper,a new architecture of optical networks—the optical network based on server system is considered.From the point of this new architecture,the network can be modeled as a server system with three type servers—the access server,the node server and the link server. The network performances such as cost,energy consume and network capacity can be affected by the capability of these three type servers.New ILP formulations are proposed to analyze the network capacity under two types of node severs,with and without wavelength converter.Computer simulations are conducted to evaluate the effectiveness of these new formulations.The study has shown that the network can achieve the same throughput under the two types of node servers and the network throughput increases when the maximum allowed variation increases.

Load Balancing in WDM Optical Networks with and without Wavelength-Continuity Constraints

In practical optical networks, there is often the same number of wavelengths in a fiber. But if it is not carefully designed, there will be much difference in link load among different fibers, and unnecessary wavelengths will be needed. This paper investigated this load balancing issues to minimize the wavelength requirements. Both Integer Linear Programming (ILP) and heuristic algorithms were presented to solve such a problem in WDM optical networks with or without wavelength continuity constraints.

Study on Wevelength Allocation Algorithm and Its Optimization of WDM All Optical Networks

１．ＩｎｔｒｏｄｕｃｔｉｏｎＷａｖｅｌｅｎｇｔｈｒｏｕｔｅｄｏｐｔｉｃａｌｎｅｔｗｏｒｋｓ（ＷＲＯＮｓ）ｗｉｔｈｏｕｔｉｎｔｅｒｍｅｄｉａｔｅｗａｖｅｌｅｎｇｔｈｔｒａｎｓｌａｔｉｏｎｏｆｅｒａｎｅｎｏｒｍｏｕｓｐｏｔｅｎｔｉａｌｉｎｓｉｍｐｌｉｆ...

A WDM Add-Drop Multiplexer with Pump-Shared EDFA's for Lightwave Networks

A simple WDM Add-Drop Multiplexer (ADM) Consisting of a set of Er-doped fibers (EDF) and a shared pump is proposed. The chief benefit of the module is that the interchannel power spread does not accumulate from stage to stage in a cascaded WDM system. Moreover, the power differences caused by different component losses existing in the WDM networks can be automatically compressed. The cost will not increase a lot since the pump source is shared in the module. The performance of a cascaded system constructed from the modules has been carefully studied by computer simulation.