Novel WO3/g-C3N4/Ni（OH）x hybrids have been successfully synthesized by a two-step strategy of high temperature calcination and in situ photodeposition.Their photocatalytic performance was investigated using TEOA as ...Novel WO3/g-C3N4/Ni（OH）x hybrids have been successfully synthesized by a two-step strategy of high temperature calcination and in situ photodeposition.Their photocatalytic performance was investigated using TEOA as a hole scavenger under visible light irradiation.The loading of WO3 and Ni（OH）x cocatalysts boosted the photocatalytic H2 evolution efficiency of g-C3N4.WO3/g-C3N4/Ni（OH）x with 20 wt%defective WO3 and 4.8 wt%Ni（OH）x showed the highest hydrogen production rate of 576 μmol/（g·h）,which was 5.7,10.8 and 230 times higher than those of g-C3N4/4.8 wt%Ni（OH）x,20 wt%WO3/C3N4 and g-C3N4 photocatalysts,respectively.The remarkably enhanced H2 evolution performance was ascribed to the combination effects of the Z-scheme heterojunction（WO3/g-C3N4） and loaded cocatalysts（Ni（OH）x）,which effectively inhibited the recombination of the photoexcited electron-hole pairs of g-C3N4 and improved both H2 evolution and TEOA oxidation kinetics.The electron spin resonance spectra of ·O2^- and ·OH radicals provided evidence for the Z-scheme charge separation mechanism.The loading of easily available Ni（OH）x cocatalysts on the Z-scheme WO3/g-C3N4 nanocomposites provided insights into constructing a robust multiple-heterojunction material for photocatalytic applications.展开更多
Carbon nitrides with two-dimensional layered structures and high theoretical capacities are attractive as anode materials for sodium-ion batteries while their low crystallinity and insufficient structural stability st...Carbon nitrides with two-dimensional layered structures and high theoretical capacities are attractive as anode materials for sodium-ion batteries while their low crystallinity and insufficient structural stability strongly restrict their practical applications.Coupling carbon nitrides with conductive carbon may relieve these issues.However,little is known about the influence of nitrogen(N)configurations on the interactions between carbon and C_(3)N_(4),which is fundamentally critical for guiding the precise design of advanced C_(3)N_(4)-related electrodes.Herein,highly crystalline C_(3)N_(4)(poly(triazine imide),PTI)based all-carbon composites were developed by molten salt strategy.More importantly,the vital role of pyrrolic-N for enhancing charge transfer and boosting Na+storage of C_(3)N_(4)-based composites,which was confirmed by both theoretical and experimental evidence,was spot-highlighted for the first time.By elaborately controlling the salt composition,the composite with high pyrrolic-N and minimized graphitic-N content was obtained.Profiting from the formation of highly crystalline PTI and electrochemically favorable pyrrolic-N configurations,the composite delivered an unusual reverse growth and record-level cycling stability even after 5000 cycles along with high reversible capacity and outstanding full-cell capacity retention.This work broadens the energy storage applications of C_(3)N_(4) and provides new prospects for the design of advanced all-carbon electrodes.展开更多
Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate ...Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate photocatalysts.Herein,a novel S-scheme Sb2WO6/g-C3N4 nanocomposite was fabricated by an ultrasound-assisted method,which exhibited excellent performance for photocatalytic ppb-level NO removal.Compared with the pure constituents of the nanocomposite,the as-prepared 15%-Sb2WO6/g-C3N4 photocatalyst could remove more than 68%continuous-flowing NO(initial concentration:400 ppb)under visible-light irradiation in 30 min.The findings of the trapping experiments confirmed that•O2^–and h+were the important active species in the NO oxidation reaction.Meanwhile,the transient photocurrent response and PL spectroscopy analyses proved that the unique S-scheme structure of the samples could enhance the charge separation efficiency.In situ DRIFTS revealed that the photocatalytic reaction pathway of NO removal over the Sb2WO6/g-C3N4 nanocomposite occurred via an oxygen-induced route.The present work proposes a new concept for fabricating efficient photocatalysts for photocatalytic ppb-level NO oxidation and provides deeper insights into the mechanism of photocatalytic NO oxidation.展开更多
The polycrystalline phase WO_3/g-C_3N_4 was synthesized under stirring using tungstenic acid(H_2WO_4) and graphitic carbon nitride(g-C_3N_4) as raw materials. The catalyst was characterized by X-ray diffraction(XRD), ...The polycrystalline phase WO_3/g-C_3N_4 was synthesized under stirring using tungstenic acid(H_2WO_4) and graphitic carbon nitride(g-C_3N_4) as raw materials. The catalyst was characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),the Fourier transform infrared spectroscopy(FT-IR),and the Brunauer-Emmett-Teller analysis(BET). The polycrystalline phase WO_3/g-C_3N_4 was determined by XRD technique. The oxidative desulfurization process was investigated using WO_3/g-C_3N_4 as the catalyst, 30% hydrogen peroxide(H202) as the oxidant, and 1-butyl-3-methylimidazolium tetrafluoroborate([bmim]BF4) ionic liquids(ILs) as the extractant. The operating conditions, including H_2WO_4 amount, IL dose, H_2 O_2 volume, temperature, catalyst dosage, and types of sulfur compounds,were systematically researched. The desulfurization rate could reach 98.46% for removing dibenzothiophene(DBT) from the model oil under optimal reaction conditions. In addition, the catalytic activity was slightly decreased after five recycles of catalysts. The reaction kinetics analysis shows that the oxidative desulfurization system was in accord with the first-order reaction kinetics equation. The mechanism of oxidative desulfurization was proposed.展开更多
采用水热法合成了NiWO_4纳米粒子,然后通过混合煅烧法成功地制备了负载型催化剂NiWO_4/g-C_3N_4。采用XRD、FT-IR、EDS、SEM、BET和XPS表征了NiWO_4/g-C_3N_4的形貌和结构特征。以NiWO_4/g-C_3N_4为催化剂,过氧化氢为氧化剂,1-丁基-3-...采用水热法合成了NiWO_4纳米粒子,然后通过混合煅烧法成功地制备了负载型催化剂NiWO_4/g-C_3N_4。采用XRD、FT-IR、EDS、SEM、BET和XPS表征了NiWO_4/g-C_3N_4的形貌和结构特征。以NiWO_4/g-C_3N_4为催化剂,过氧化氢为氧化剂,1-丁基-3-甲基咪唑四氟硼酸盐离子液体([BMIM]BF4)为萃取剂。考察了催化剂的负载量,过氧化氢、离子液体和催化剂使用量,反应温度,反应时间,不同种类的含硫化合物对脱硫效果的影响。结果表明,在5 m L模拟油,0.2 m L过氧化氢,1.0 m L的[BMIM]BF4,0.03 g的NiWO_4/g-C_3N_4,反应温度为80℃,反应时间为140 min的最佳的反应条件下,脱硫率可以达到97.35%。实验表明,NiWO_4/g-C_3N_4具有很好的催化稳定性,催化剂重复使用五次后催化活性并没有明显地降低。展开更多
Bi_2WO_6 was modified by two-dimensional g-C_3N_4(2D g-C_3N_4)via a hydrothermal method.The structure,morphology,optical and electronic properties were investigated by multiple techniques,including X-ray diffraction(X...Bi_2WO_6 was modified by two-dimensional g-C_3N_4(2D g-C_3N_4)via a hydrothermal method.The structure,morphology,optical and electronic properties were investigated by multiple techniques,including X-ray diffraction(XRD),X-ray photoelectron spectroscopy spectra(XPS),Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Ultravioletvisible diffuse reflection spectroscopy(DRS),photocurrent and electrochemical impedance spectroscopy(EIS),electron spin resonance(ESR),respectively.Rhodamine B(Rh B)was used as the target organic pollutant to research the photocatalytic performance of as-prepared composites.The Bi_2WO_6/2D g-C_3N_4exhibited a remarkable improvement compared with the pure Bi_2WO_6.The enhanced photocatalytic activity was because the photogenerated electrons and holes can quickly separate by Z-Scheme passageway in composites.The photocatalytic mechanism was also researched in detail through ESR analysis.展开更多
基金supported by the National Natural Science Foundation of China (51672089)the Industry and Research Collaborative Innovation Major Projects of Guangzhou (201508020098)+1 种基金the State Key Laboratory of Advanced Technology for Material Synthesis and Processing (Wuhan University of Technology) (2015-KF-7)the Hunan Key Laboratory of Applied Environmental Photocatalysis (Changsha University) (CCSU-XT-04)~~
文摘Novel WO3/g-C3N4/Ni（OH）x hybrids have been successfully synthesized by a two-step strategy of high temperature calcination and in situ photodeposition.Their photocatalytic performance was investigated using TEOA as a hole scavenger under visible light irradiation.The loading of WO3 and Ni（OH）x cocatalysts boosted the photocatalytic H2 evolution efficiency of g-C3N4.WO3/g-C3N4/Ni（OH）x with 20 wt%defective WO3 and 4.8 wt%Ni（OH）x showed the highest hydrogen production rate of 576 μmol/（g·h）,which was 5.7,10.8 and 230 times higher than those of g-C3N4/4.8 wt%Ni（OH）x,20 wt%WO3/C3N4 and g-C3N4 photocatalysts,respectively.The remarkably enhanced H2 evolution performance was ascribed to the combination effects of the Z-scheme heterojunction（WO3/g-C3N4） and loaded cocatalysts（Ni（OH）x）,which effectively inhibited the recombination of the photoexcited electron-hole pairs of g-C3N4 and improved both H2 evolution and TEOA oxidation kinetics.The electron spin resonance spectra of ·O2^- and ·OH radicals provided evidence for the Z-scheme charge separation mechanism.The loading of easily available Ni（OH）x cocatalysts on the Z-scheme WO3/g-C3N4 nanocomposites provided insights into constructing a robust multiple-heterojunction material for photocatalytic applications.
基金supported by the National Natural Science Foundation of China(51904059)Applied Basic Research Program of Liaoning(2022JH2/101300200)+1 种基金Guangdong Basic and Applied Basic Research Foundation(2022A1515140188)Fundamental Research Funds for the Central Universities(N_(2)002005,N_(2)125004,N_(2)225044)。
文摘Carbon nitrides with two-dimensional layered structures and high theoretical capacities are attractive as anode materials for sodium-ion batteries while their low crystallinity and insufficient structural stability strongly restrict their practical applications.Coupling carbon nitrides with conductive carbon may relieve these issues.However,little is known about the influence of nitrogen(N)configurations on the interactions between carbon and C_(3)N_(4),which is fundamentally critical for guiding the precise design of advanced C_(3)N_(4)-related electrodes.Herein,highly crystalline C_(3)N_(4)(poly(triazine imide),PTI)based all-carbon composites were developed by molten salt strategy.More importantly,the vital role of pyrrolic-N for enhancing charge transfer and boosting Na+storage of C_(3)N_(4)-based composites,which was confirmed by both theoretical and experimental evidence,was spot-highlighted for the first time.By elaborately controlling the salt composition,the composite with high pyrrolic-N and minimized graphitic-N content was obtained.Profiting from the formation of highly crystalline PTI and electrochemically favorable pyrrolic-N configurations,the composite delivered an unusual reverse growth and record-level cycling stability even after 5000 cycles along with high reversible capacity and outstanding full-cell capacity retention.This work broadens the energy storage applications of C_(3)N_(4) and provides new prospects for the design of advanced all-carbon electrodes.
文摘Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers.To overcome this problem,S-scheme composites have been developed to fabricate photocatalysts.Herein,a novel S-scheme Sb2WO6/g-C3N4 nanocomposite was fabricated by an ultrasound-assisted method,which exhibited excellent performance for photocatalytic ppb-level NO removal.Compared with the pure constituents of the nanocomposite,the as-prepared 15%-Sb2WO6/g-C3N4 photocatalyst could remove more than 68%continuous-flowing NO(initial concentration:400 ppb)under visible-light irradiation in 30 min.The findings of the trapping experiments confirmed that•O2^–and h+were the important active species in the NO oxidation reaction.Meanwhile,the transient photocurrent response and PL spectroscopy analyses proved that the unique S-scheme structure of the samples could enhance the charge separation efficiency.In situ DRIFTS revealed that the photocatalytic reaction pathway of NO removal over the Sb2WO6/g-C3N4 nanocomposite occurred via an oxygen-induced route.The present work proposes a new concept for fabricating efficient photocatalysts for photocatalytic ppb-level NO oxidation and provides deeper insights into the mechanism of photocatalytic NO oxidation.
基金the financial support of the Doctoral Fund of Liaoning Province (201501105)
文摘The polycrystalline phase WO_3/g-C_3N_4 was synthesized under stirring using tungstenic acid(H_2WO_4) and graphitic carbon nitride(g-C_3N_4) as raw materials. The catalyst was characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),the Fourier transform infrared spectroscopy(FT-IR),and the Brunauer-Emmett-Teller analysis(BET). The polycrystalline phase WO_3/g-C_3N_4 was determined by XRD technique. The oxidative desulfurization process was investigated using WO_3/g-C_3N_4 as the catalyst, 30% hydrogen peroxide(H202) as the oxidant, and 1-butyl-3-methylimidazolium tetrafluoroborate([bmim]BF4) ionic liquids(ILs) as the extractant. The operating conditions, including H_2WO_4 amount, IL dose, H_2 O_2 volume, temperature, catalyst dosage, and types of sulfur compounds,were systematically researched. The desulfurization rate could reach 98.46% for removing dibenzothiophene(DBT) from the model oil under optimal reaction conditions. In addition, the catalytic activity was slightly decreased after five recycles of catalysts. The reaction kinetics analysis shows that the oxidative desulfurization system was in accord with the first-order reaction kinetics equation. The mechanism of oxidative desulfurization was proposed.
文摘采用水热法合成了NiWO_4纳米粒子,然后通过混合煅烧法成功地制备了负载型催化剂NiWO_4/g-C_3N_4。采用XRD、FT-IR、EDS、SEM、BET和XPS表征了NiWO_4/g-C_3N_4的形貌和结构特征。以NiWO_4/g-C_3N_4为催化剂,过氧化氢为氧化剂,1-丁基-3-甲基咪唑四氟硼酸盐离子液体([BMIM]BF4)为萃取剂。考察了催化剂的负载量,过氧化氢、离子液体和催化剂使用量,反应温度,反应时间,不同种类的含硫化合物对脱硫效果的影响。结果表明,在5 m L模拟油,0.2 m L过氧化氢,1.0 m L的[BMIM]BF4,0.03 g的NiWO_4/g-C_3N_4,反应温度为80℃,反应时间为140 min的最佳的反应条件下,脱硫率可以达到97.35%。实验表明,NiWO_4/g-C_3N_4具有很好的催化稳定性,催化剂重复使用五次后催化活性并没有明显地降低。
基金supported by National Nature Science Foundation of China (21476097, 21776118)Six talent peaks project in Jiangsu Province (2014-JNHB-014)Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Bi_2WO_6 was modified by two-dimensional g-C_3N_4(2D g-C_3N_4)via a hydrothermal method.The structure,morphology,optical and electronic properties were investigated by multiple techniques,including X-ray diffraction(XRD),X-ray photoelectron spectroscopy spectra(XPS),Fourier transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Ultravioletvisible diffuse reflection spectroscopy(DRS),photocurrent and electrochemical impedance spectroscopy(EIS),electron spin resonance(ESR),respectively.Rhodamine B(Rh B)was used as the target organic pollutant to research the photocatalytic performance of as-prepared composites.The Bi_2WO_6/2D g-C_3N_4exhibited a remarkable improvement compared with the pure Bi_2WO_6.The enhanced photocatalytic activity was because the photogenerated electrons and holes can quickly separate by Z-Scheme passageway in composites.The photocatalytic mechanism was also researched in detail through ESR analysis.
