The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals ...The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals Cu, Sn and Pb were recovered from the pyrolyzed WPCBs. The effect of pyrolysis temperature and time on the recovery efficiency of valuable metals was investigated. Additionally, the characterization for morphology and surface elemental distribution of pyrolysis residues was carried out to investigate the pyrolysis mechanism. The plastic fiber boards turned into black carbides, and they can be easily separated from the metals by manual. The results indicate that 91.2%, 96.1% and 94.4% of Cu, Sn and Pb can be recovered after microwave pyrolysis at 700 °C for 60 minutes. After pyrolysis, about 79.8%(mass)solid products, 11.9%(mass) oil and 8.3%(mass) gas were produced. These gas and oil can be used as fuel and raw materials of organic chemicals, respectively. This process provides an efficient and energy-saving technology for recovering valuable metals from WPCBs.展开更多
A huge amount of waste printed circuit boards(WPCBs) was produced while the electronic manufacturing industry developed rapidly. WPCBs mainly consist of organic compounds, which makes it possible to prepare them into ...A huge amount of waste printed circuit boards(WPCBs) was produced while the electronic manufacturing industry developed rapidly. WPCBs mainly consist of organic compounds, which makes it possible to prepare them into porous carbon as valuable adsorbent. However, WPCBs are also rich in valuable metals.Cu makes up the most of these metals. It is worth studying whether the residual metal will affect the application of carbon materials. In this study, the porous active carbon(AC) was prepared from WPCBs as an adsorbent. Sulfadiazine(SD), a widely detected antibiotic contaminant, was used as a target pollutant.Nitric acid(HNO_(3)) was used to modify AC(AC-HNO_(3)) to remove the residual Cu. The experiment results showed that the adsorption kinetics of SD by AC(k = 0.0025) and AC-HNO_(3)(k = 0.0029) can be described better using a pseudo-second-order kinetic equation. The adsorption isotherms of AC and AC-HNO_(3) on SD could be fitted by the Langmuir model. AC had a larger adsorption capacity than AC-HNO_(3). Density functional theory(DFT) calculation results suggested that the-OH group and Cu on the surface of AC could be the adsorption sites and promote the SD adsorption. This work provides practical methods to recycle WPCBs into wealth and realized waste control by waste.展开更多
Copper recovery is the core of waste printed circuit boards （WPCBs） treatment. In this study, we proposed a feasible and efficient way to recover copper from WPCBs concentrated metal scraps by direct electrolysis an...Copper recovery is the core of waste printed circuit boards （WPCBs） treatment. In this study, we proposed a feasible and efficient way to recover copper from WPCBs concentrated metal scraps by direct electrolysis and thctors that affect copper recovery rate and purity, mainly CuSO4.5H2O concentration, NaCI concentration, H2SO4 concentration and current density, were discussed in detail. The results indicated that copper recovery rate increased first with the increase ofCuSO4- 5H2O, NaCI, H2SO4 and current density and then decreased with further increasing these conditions. NaCI, H2SO4 and current density also showed a similar impact on copper purity, which also increased first and then decreased. Copper purity increased with the increase of CuSO4.5H2O. When the concentration of CuSO4-5H2O NaCI and H2oSO4 was respectively 90, 40 and 118 g/L and current density was 80 mA/cm-, copper recovery rate and purity was up to 97.32% and 99.86%, respectively. Thus, electrolysis proposes a feasible and prospective approach for waste printed circuit boards recycle, even for e-waste, though more researches are needed for industrial application.展开更多
Superfine copper particles could be directly prepared from waste printed circuit boards by slurry electrolysis.Meanwhile,copper fractal growth could be observed.To better understand this phenomenon,the factors that af...Superfine copper particles could be directly prepared from waste printed circuit boards by slurry electrolysis.Meanwhile,copper fractal growth could be observed.To better understand this phenomenon,the factors that affect copper dendrites in a point-cathode system were discussed in detail.These results showed that the fractal degree of copper dendrites increased as the increase of applied voltage and the decrease of copper sulfate and gelatin concentrations.Sodium lauryl sulfate and hydrochloric acid concentrations could not significantly impact the fractal degree of copper dendrites,while gelatin concentration could.The minimum copper fractal dimension was 1.069 when gelatin and copper sulfate concentration was 120 mg/L and 0.1 mol/L,respectively with an applied voltage of 11 V.Moreover,the results diffusion-limited aggregation model demonstrated that particle translational speed,particle numbers and binding probability significantly affected copper dendrite patterns.The scanning electron microscopy results indicated that the three additives greatly affected the refinement of the copper crystal.These findings contribute to enrich the theoretical study on metals recovery from e-waste by slurry electrolysis.展开更多
基金supported by the National Key Research and Development Program of China (2019YFC1908404)the National Natural Science Foundation of China (Nos. 51834008, 51874040,52034002)+1 种基金the Guangxi Innovation-Driven Development Project(AA18242042-1)the Fundamental Research Funds for the Central Universities (FRF-TP-18-020A3)。
文摘The recycling of waste printed circuit board(WPCBs) is of great significance for saving resources and protecting the environment. In this study, the WPCBs were pyrolyzed by microwave and the contained valuable metals Cu, Sn and Pb were recovered from the pyrolyzed WPCBs. The effect of pyrolysis temperature and time on the recovery efficiency of valuable metals was investigated. Additionally, the characterization for morphology and surface elemental distribution of pyrolysis residues was carried out to investigate the pyrolysis mechanism. The plastic fiber boards turned into black carbides, and they can be easily separated from the metals by manual. The results indicate that 91.2%, 96.1% and 94.4% of Cu, Sn and Pb can be recovered after microwave pyrolysis at 700 °C for 60 minutes. After pyrolysis, about 79.8%(mass)solid products, 11.9%(mass) oil and 8.3%(mass) gas were produced. These gas and oil can be used as fuel and raw materials of organic chemicals, respectively. This process provides an efficient and energy-saving technology for recovering valuable metals from WPCBs.
基金supported by the Natural Science Foundation of Shandong Province Youth Project (No. ZR2021QE208)。
文摘A huge amount of waste printed circuit boards(WPCBs) was produced while the electronic manufacturing industry developed rapidly. WPCBs mainly consist of organic compounds, which makes it possible to prepare them into porous carbon as valuable adsorbent. However, WPCBs are also rich in valuable metals.Cu makes up the most of these metals. It is worth studying whether the residual metal will affect the application of carbon materials. In this study, the porous active carbon(AC) was prepared from WPCBs as an adsorbent. Sulfadiazine(SD), a widely detected antibiotic contaminant, was used as a target pollutant.Nitric acid(HNO_(3)) was used to modify AC(AC-HNO_(3)) to remove the residual Cu. The experiment results showed that the adsorption kinetics of SD by AC(k = 0.0025) and AC-HNO_(3)(k = 0.0029) can be described better using a pseudo-second-order kinetic equation. The adsorption isotherms of AC and AC-HNO_(3) on SD could be fitted by the Langmuir model. AC had a larger adsorption capacity than AC-HNO_(3). Density functional theory(DFT) calculation results suggested that the-OH group and Cu on the surface of AC could be the adsorption sites and promote the SD adsorption. This work provides practical methods to recycle WPCBs into wealth and realized waste control by waste.
文摘Copper recovery is the core of waste printed circuit boards （WPCBs） treatment. In this study, we proposed a feasible and efficient way to recover copper from WPCBs concentrated metal scraps by direct electrolysis and thctors that affect copper recovery rate and purity, mainly CuSO4.5H2O concentration, NaCI concentration, H2SO4 concentration and current density, were discussed in detail. The results indicated that copper recovery rate increased first with the increase ofCuSO4- 5H2O, NaCI, H2SO4 and current density and then decreased with further increasing these conditions. NaCI, H2SO4 and current density also showed a similar impact on copper purity, which also increased first and then decreased. Copper purity increased with the increase of CuSO4.5H2O. When the concentration of CuSO4-5H2O NaCI and H2oSO4 was respectively 90, 40 and 118 g/L and current density was 80 mA/cm-, copper recovery rate and purity was up to 97.32% and 99.86%, respectively. Thus, electrolysis proposes a feasible and prospective approach for waste printed circuit boards recycle, even for e-waste, though more researches are needed for industrial application.
基金supported by the National Natural Science Foundation of China(No.51974262)by the Science&Technology Pillar Program of Sichuan Province(No.2019YFS0450).
文摘Superfine copper particles could be directly prepared from waste printed circuit boards by slurry electrolysis.Meanwhile,copper fractal growth could be observed.To better understand this phenomenon,the factors that affect copper dendrites in a point-cathode system were discussed in detail.These results showed that the fractal degree of copper dendrites increased as the increase of applied voltage and the decrease of copper sulfate and gelatin concentrations.Sodium lauryl sulfate and hydrochloric acid concentrations could not significantly impact the fractal degree of copper dendrites,while gelatin concentration could.The minimum copper fractal dimension was 1.069 when gelatin and copper sulfate concentration was 120 mg/L and 0.1 mol/L,respectively with an applied voltage of 11 V.Moreover,the results diffusion-limited aggregation model demonstrated that particle translational speed,particle numbers and binding probability significantly affected copper dendrite patterns.The scanning electron microscopy results indicated that the three additives greatly affected the refinement of the copper crystal.These findings contribute to enrich the theoretical study on metals recovery from e-waste by slurry electrolysis.
