The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element ther...The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element thermo-mechanical model was established for the laser cladding formation of thin wall with the 17-4 PH powder on the FV520( B) steel. The temperature field was firstly analyzed,based on which the stress field and strain field of the laser cladding forming process were analyzed.In order to validate the prediction,the final residual stress field in the obtained thin wall was tested by X-ray diffraction in comparison with the predicted results.展开更多
Hemodynamic parameters play an important role in aneurysm formation and growth. However, it is difficult to directly observe a rapidly growing de novo aneurysm in a patient. To investigate possible associations betwee...Hemodynamic parameters play an important role in aneurysm formation and growth. However, it is difficult to directly observe a rapidly growing de novo aneurysm in a patient. To investigate possible associations between hemodynamic parameters and the formation and growth of intracranial aneurysms, the present study constructed a computational model of a case with an internal carotid artery aneurysm and an anterior communicating artery aneurysm, based on the CT angiography findings of a patient. To simulate the formation of the anterior communicating artery aneurysm and the growth of the internal carotid artery aneurysm, we then constructed a model that virtually removed the anterior communicating artery aneurysm, and a further two models that also progressively decreased the size of the internal carotid artery aneurysm. Computational simulations of the fluid dynamics of the four models were performed under pulsatile flow conditions, and wall shear stress was compared among the different models. In the three aneurysm growth models, increasing size of the aneurysm was associated with an increased area of low wall shear stress, a significant decrease in wall shear stress at the dome of the aneurysm, and a significant change in the wall shear stress of the parent artery. The wall shear stress of the anterior communicating artery remained low, and was significantly lower than the wall shear stress at the bifurcation of the internal carotid artery or the bifurcation of the middle cerebral artery. After formation of the anterior communicating artery aneurysm, the wall shear stress at the dome of the internal carotid artery aneurysm increased significantly, and the wall shear stress in the upstream arteries also changed significantly. These findings indicate that low wall shear stress may be associated with the initiation and growth of aneurysms, and that aneurysm formation and growth may influence hemodynamic parameters in the local and adjacent arteries.展开更多
The flow around an axisymmetric body of revolution(DARPA SUBOFF bare model)at Re=1.2×10^(7)is numerically investigated using the wall-modeled large eddy simulation(WMLES).To evaluate the capabilities of WMLES in ...The flow around an axisymmetric body of revolution(DARPA SUBOFF bare model)at Re=1.2×10^(7)is numerically investigated using the wall-modeled large eddy simulation(WMLES).To evaluate the capabilities of WMLES in such wall-bounded turbulent flows,the effects of the wall stress model and sampling distance are systematically studied.The numerical results of the non-equilibrium wall stress model with an appropriate sampling distance are in good agreement with the experiments in terms of pressure coefficient,skin-friction coefficient,and drag coefficient.On this basis,the thickening of the turbulent boundary layer and the expansion of the wake can be clearly observed through flow visualization,especially using the Liutex vortex identification method.展开更多
A dynamical moving pressure structural numerical calculation model using the internal ballistics calculation pressure-time results was constituted and the vicinity of the internal ballistics and quasiinternal ballisti...A dynamical moving pressure structural numerical calculation model using the internal ballistics calculation pressure-time results was constituted and the vicinity of the internal ballistics and quasiinternal ballistics structural model was checked. The Von Mises stresses obtained by the dynamical structural numerical model calculations and the Von Mises stresses calculated from the shot test strain measurements were compared. The difference for the worse case was 20% and for the best case was 0.1%.Furthermore, the model gave better agreement for the higher charge masses. The numerical structural quasi-internal ballistics computation model created was verified for the top charge mass which represents the highest stress condition and used in a gun barrel design.展开更多
Two different non_Newtonian models for blood flow are considered,first a simple power law model displaying shear thinning viscosity,and second a generalized Maxwell model displaying both shear thinning viscosity and o...Two different non_Newtonian models for blood flow are considered,first a simple power law model displaying shear thinning viscosity,and second a generalized Maxwell model displaying both shear thinning viscosity and oscillating flow viscous_elasticity.These models are used along with a Newtonian model to study sinusoidal flow of blood in rigid and elastic straight arteries in the presence of magnetic field.The elasticity of blood does not appear to influence its flow behavior under physiological conditions in the large arteries,purely viscous shear thinning model should be quite realistic for simulating blood flow under these conditions.On using the power law model with high shear rate for sinusoidal flow simulation in elastic arteries,the mean and amplitude of the flow rate were found to be lower for a power law fluid compared to Newtonian fluid for the same pressure gradient.The governing equations have been solved by Crank_Niclson scheme.The results are interpreted in the context of blood in the elastic arteries keeping the magnetic effects in view.For physiological flow simulation in the aorta,an increase in mean wall shear stress,but a reduction in peak wall shear stress were observed for power law model compared to a Newtonian fluid model for matched flow rate wave form.Blood flow in the presence of transverse magnetic field in an elastic artery is investigated and the influence of factors such as morphology and surface irregularity is evaluated.展开更多
A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation bas...A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wall region and it thus possibly opens a new way for turbulence modeling in this region.展开更多
基金supported by a great from the Major State Basic Research Development Program of China(No.2011CB013403)the Scientific Research Foundation for Talent,Guizhou University(No.201665)
文摘The residual stress generated in the laser cladding could lead to undesirable distortions or even crack formation. In order to better understand the evolution/yielding process of stress field,a 3 D finite-element thermo-mechanical model was established for the laser cladding formation of thin wall with the 17-4 PH powder on the FV520( B) steel. The temperature field was firstly analyzed,based on which the stress field and strain field of the laser cladding forming process were analyzed.In order to validate the prediction,the final residual stress field in the obtained thin wall was tested by X-ray diffraction in comparison with the predicted results.
基金supported by the National Natural Science Foundation of China, No. 81171109
文摘Hemodynamic parameters play an important role in aneurysm formation and growth. However, it is difficult to directly observe a rapidly growing de novo aneurysm in a patient. To investigate possible associations between hemodynamic parameters and the formation and growth of intracranial aneurysms, the present study constructed a computational model of a case with an internal carotid artery aneurysm and an anterior communicating artery aneurysm, based on the CT angiography findings of a patient. To simulate the formation of the anterior communicating artery aneurysm and the growth of the internal carotid artery aneurysm, we then constructed a model that virtually removed the anterior communicating artery aneurysm, and a further two models that also progressively decreased the size of the internal carotid artery aneurysm. Computational simulations of the fluid dynamics of the four models were performed under pulsatile flow conditions, and wall shear stress was compared among the different models. In the three aneurysm growth models, increasing size of the aneurysm was associated with an increased area of low wall shear stress, a significant decrease in wall shear stress at the dome of the aneurysm, and a significant change in the wall shear stress of the parent artery. The wall shear stress of the anterior communicating artery remained low, and was significantly lower than the wall shear stress at the bifurcation of the internal carotid artery or the bifurcation of the middle cerebral artery. After formation of the anterior communicating artery aneurysm, the wall shear stress at the dome of the internal carotid artery aneurysm increased significantly, and the wall shear stress in the upstream arteries also changed significantly. These findings indicate that low wall shear stress may be associated with the initiation and growth of aneurysms, and that aneurysm formation and growth may influence hemodynamic parameters in the local and adjacent arteries.
基金financially supported in part by the National Key Research and Development Pro-gram of China(No.2022YFB3404803)the National Natural Science Foundation of China(No.92160301).
基金Project supported by the National Natural Science Foundation of China(Grant No.52131102)the National Key Research and Development Program of China(Grant Nos.2022YFC2806705,2019YFB1704200).
文摘The flow around an axisymmetric body of revolution(DARPA SUBOFF bare model)at Re=1.2×10^(7)is numerically investigated using the wall-modeled large eddy simulation(WMLES).To evaluate the capabilities of WMLES in such wall-bounded turbulent flows,the effects of the wall stress model and sampling distance are systematically studied.The numerical results of the non-equilibrium wall stress model with an appropriate sampling distance are in good agreement with the experiments in terms of pressure coefficient,skin-friction coefficient,and drag coefficient.On this basis,the thickening of the turbulent boundary layer and the expansion of the wake can be clearly observed through flow visualization,especially using the Liutex vortex identification method.
基金Ministry of Science, Industry, and Technology which supported this project under the Industrial Thesis Support Program
文摘A dynamical moving pressure structural numerical calculation model using the internal ballistics calculation pressure-time results was constituted and the vicinity of the internal ballistics and quasiinternal ballistics structural model was checked. The Von Mises stresses obtained by the dynamical structural numerical model calculations and the Von Mises stresses calculated from the shot test strain measurements were compared. The difference for the worse case was 20% and for the best case was 0.1%.Furthermore, the model gave better agreement for the higher charge masses. The numerical structural quasi-internal ballistics computation model created was verified for the top charge mass which represents the highest stress condition and used in a gun barrel design.
文摘Two different non_Newtonian models for blood flow are considered,first a simple power law model displaying shear thinning viscosity,and second a generalized Maxwell model displaying both shear thinning viscosity and oscillating flow viscous_elasticity.These models are used along with a Newtonian model to study sinusoidal flow of blood in rigid and elastic straight arteries in the presence of magnetic field.The elasticity of blood does not appear to influence its flow behavior under physiological conditions in the large arteries,purely viscous shear thinning model should be quite realistic for simulating blood flow under these conditions.On using the power law model with high shear rate for sinusoidal flow simulation in elastic arteries,the mean and amplitude of the flow rate were found to be lower for a power law fluid compared to Newtonian fluid for the same pressure gradient.The governing equations have been solved by Crank_Niclson scheme.The results are interpreted in the context of blood in the elastic arteries keeping the magnetic effects in view.For physiological flow simulation in the aorta,an increase in mean wall shear stress,but a reduction in peak wall shear stress were observed for power law model compared to a Newtonian fluid model for matched flow rate wave form.Blood flow in the presence of transverse magnetic field in an elastic artery is investigated and the influence of factors such as morphology and surface irregularity is evaluated.
基金The authors wish to express their gratitude to Prof.Zhou Heng for detailed and extremely helpful comments on a draft of this paper.This work was supported by the Climbing Program and the National Science Foundation of China(Grant No.59476017)
文摘A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wall region and it thus possibly opens a new way for turbulence modeling in this region.
