Effect of Waste Paper Fiber on Properties of Cementbased Mortar and Relative Mechanism

The aim of this work was to investigate the effect of waste paper fiber on the properties of cement-based mortar and the relative mechanism. The cement-based mortars with various contents and mixing way of waste paper fibers were prepared and the slump flow, setting time and strength developments of all mortars were tested. Besides, Ca（OH）_2 content in hardened pastes at different ages and the microstructures of all mortar at 90 d were observed by scanning electron microscopy. The experimental results showed that in the process of mixing, more superplastizier was consumed to maintain the workability because of the absorption of water and superplastizer on waste paper fiber. With more waste paper fiber being added, longer setting time is available for the pastes with it because of the carbohydrate dissolving and its retarding to the cement hydration. Waste paper fiber is adverse to the early and later strength of cement-based mortar, but it increases the mortar strengths at 7 and 28 d. The strength, Ca（OH）_2 content and microstructure are related to the content and mixing way of waste paper fiber. Waste paper fiber helps produce the Ca（OH）_2 at 7 and 28 d, but this case is reverse at ages of 1 and 3 d. Overall, waste paper fiber leads to the appearance of more pores in the hardened paste. However, it increases the toughness of cement-based mortar.

Photodegradation of Orange Ⅱ using waste paper sludge-derived heterogeneous catalyst in the presence of oxalate under ultraviolet light emitting diode irradiation

A waste paper sludge-derived heterogeneous catalyst（WPS-Fe-350） was synthesized via a facile method and successfully applied for the degradation of Orange Ⅱ in the presence of oxalic acid under the illumination of ultraviolet light emitting diode（UV-LED） Powder X-ray diffraction,Fourier-transform infrared spectroscopy,scanning electronic microscopy and N2 sorption isotherm analysis indicated the formation of α-Fe2O3 in the mesoporous nanocomposite.The degradation test showed that WPS-Fe-350 exhibited rapid Orange Ⅱ（OⅡ） degradation and mineralization in the presence of oxalic acid under the illumination of UV-LED.The effects of p H,oxalic acid concentration and dosage of the catalyst on the degradation of OⅡ were evaluated,respectively.Under the optimal conditions（1 g/L catalyst dosage,2 mmol/L oxalic acid and p H 3.0）,the degradation percentage for a solution containing 30 mg/L OⅡ reached 83.4% under illumination by UV-LED for 80 min.Moreover,five cyclic tests for OⅡ degradation suggested that WPS-Fe-350 exhibited excellent stability of catalytic activity.Hence,this study provides an alternative environmentally friendly way to reuse waste paper sludge and an effective and economically viable method for degradation of azo dyes and other refractory organic pollutants in water.

Treatment and Resource Utilization of Deinking Sludge from Regenerated Paper Mill

To fully utilize secondary resources,it will inevitably generate a large amount of deinking sludge using waste paper as raw material for paper making.The sludge contains small fibers and dissolved substances of various chemicals.After adding flocculant and settling treatment,deinked sludge is formed.However,its organic matter content can reach a high level of 40%to 50%,and it can also be reused,effectively avoiding the harmful impact of papermaking sludge on the environment.

The Interaction Effects of the Parameters on Optimization Design in Paper Production Waste Usage on Alkali-Activated Slag with Taguchi Method

The paper investigates the second-order interactions of parameters in an alkali-activated mixture of paper production waste(PPW)and blast furnace slag(BFS)in Taguchi method.The PPW including lime mud(LM)and paper sludge(PS).This paper provides the experimental models to assess the compressive and flexural strength of them at 7-day and 28-day.The results have shown that the second-order interactions between PPW and alkali-activated activator exists in each experimental model,and the significant interactions affect the selection of optimal compositions.Compared with the interactions between the PPW themselves,the interactions between PPW and alkali-activated parameters are the main significant factors affecting its physical properties.In each experimental model,the maximum compressive strength was 47.41 MPa in 7-day and 65.64 MPa in 28-day.Compared with the confirmatory experiments,the deviation of prediction calculated by experimental models was 3.08%and 0.56%,respectively.The maximum flexural strength was 5.74 MPa in 7-day and 5.96 MPa in 28-day;compared with the confirmatory experiments,the deviation of prediction calculated by experimental models was 5.40%and 0.17%.Considering the influence of circular materials,30%of PPW should be a suitable ratio to replace BFS as the raw material of alkali-activated slag(AAS).

Characterization of Manmade and Recycled Cellulosic Fibers for Their Application in Building Materials

The aim of this study was to characterize two types of cellulosic fibers obtained from bleached wood pulp and unbleached recycled waste paper with different cellulose content(from 47.4 percent up to 82 percent),to compare and to analyze the potential use of the recycled fibers for building application,such as plastering mortar.Changes in the chemical composition,cellulose crystallinity and degree of polymerization of the fibers were found.The recycled fibers of lower quality showed heterogeneity in the fiber sizes(width and length),and they had greater surface roughness in comparison to high purity wood pulp samples.The high purity fibers(cellulose content>80.0 percent)had greater crystallinity and more homogeneous and smooth surfaces than the recycled fibers.The presence of calcite and kaolinite in all of the recycled cellulosic fibers samples was confirmed,whereas only one wood pulp sample contained calcite.The influence of the chemical composition was reflected in the fiber density values.Changes in the chemical composition and cellulose structure of the fibers affected the specific surface area,porosity and thermo physical properties of the fibers.More favorable values of thermal conductivity were reached for the recycled fibers than for the wood pulp samples.Testing the suitability of the recycled fibers with inorganic impurities originating from the paper-making processes for their use as fillers in plastering mortars(0.5 wt.%fiber content of the total weight of the filler and binder)confirmed their application by achieving a compressive strength value of 28 day-cured fiber-cement mortar required by the standard as well as by measured more favorable value of capillary water absorption coefficient.

废纸资源化的新技术

废纸资源化是解决环境污染、原料短缺和能源紧张问题的有效途径之一。目前,世界各国关于废纸资源化技术的研究已经取得很大进展。因为原料易得,工艺过程简单,既节约资源,又保护环境,因此,可以取行良好的经济效益和社会效益。而我国目前废纸资源化技术单一,主要用于造纸业。为了更好地节约森林资源,保护生态环境,有必要探索废纸资源化的新技术。