Artificial neural network modeling of water quality of the Yangtze River system:a case study in reaches crossing the city of Chongqing

An effective approach for describing complicated water quality processes is very important for river water quality management. We built two artificial neural network(ANN) models,a feed-forward back-propagation(BP) model and a radial basis function(RBF) model,to simulate the water quality of the Yangtze and Jialing Rivers in reaches crossing the city of Chongqing,P. R. China. Our models used the historical monitoring data of biological oxygen demand,dissolved oxygen,ammonia,oil and volatile phenolic compounds. Comparison with the one-dimensional traditional water quality model suggest that both BP and RBF models are superior; their higher accuracy and better goodness-of-fit indicate that the ANN calculation of water quality agrees better with measurement. It is demonstrated that ANN modeling can be a tool for estimating the water quality of the Yangtze River. Of the two ANN models,the RBF model calculates with a smaller mean error,but a larger root mean square error. More effort to identify out the causes of these differences would help optimize the structures of neural network water-quality models.

Assessment of Point and Nonpoint Sources Pollution in Songhua River Basin,Northeast China by Using Revised Water Quality Model

Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin.It is difficult to identify the sources and to quantify the load, especially in modeling nonpoint source.In this study a revised model was established by integrating point and nonpoint sources into one-dimensional Streeter-Phelps(S-P) model on the basis of real-time hydrologic data and surface water quality monitoring data in the Jilin Reach of the Songhua River Basin.Chemical oxygen demand(COD) and ammonia nitrogen(NH 3-N) loads were estimated.Results showed that COD loads of point source and nonpoint source were 134 958 t/yr and 86 209 t/yr, accounting for 61.02% and 38.98% of total loads, respectively.NH 3-N loads of point source and nonpoint source were 16 739 t/yr and 14 272 t/yr, accounting for 53.98% and 46.02%, respectively.Point source pollution was stronger than nonpoint source pollution in the study area at present.The water quality of upstream was better than that of downstream of the rivers and cities.It is indispensable to treat industrial wastewater and municipal sewage out of point sources, to adopt the best management practices to control diffuse pollutants from agricultural land and urban surface runoff in improving water quality of the Songhua River Basin.The revised S-P model can be successfully used to identify pollution source and quantify point source and nonpoint source loads by calibrating and validating.

Development and application of a two-dimensional water quality model for the Daqinghe River Mouth of the Dianchi Lake

Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.

Operational guidance for aeration and flow augmentation for the Chicago Area Waterway System—A case study

The Chicago Area Waterway System(CAWS)is a 133.9 km branching network of navigable waterways controlled by hydraulic structures,in which the majority of the flow is treated wastewater effluent and there are periods of substantial combined sewer overflows.The CAWS comprises a network of effluent dominated streams.More stringent dissolved oxygen(DO)standards and a reduced flow augmentation allowance have been recently applied to the CAWS.Therefore,a carefully calibrated and verified one-dimensional flow and water quality model was applied to the CAWS to determine emission-based real-time control guidelines for the operation of flow augmentation and aeration stations.The goal of these guidelines was to attain DO standards at least 95%of the time.The“optimal”guidelines were tested for representative normal,dry,and wet years.The finally proposed guidelines were found in the simulations to attain the 95%target for nearly all locations in the CAWS for the three test years.The developed operational guidelines have been applied since 2018 and have shown improved attainment of the DO standards throughout the CAWS while at the same time achieving similar energy use at the aeration stations on the Calumet River system,greatly lowered energy use on the Chicago River system,and greatly lowered discretionary diversion from Lake Michigan,meeting the recently enacted lower amount of allowed annual discretionary diversion.This case study indicates that emission-based real-time control developed from a well calibrated model holds potential to help many receiving water bodies achieve high attainment of water quality standards.

Water Quality Model Establishment for Middle and Lower Reaches of Hanshui River,China

With the development of industry and agriculture,nitrogen,phosphorus and other nutrients in the Hanshui River greatly increase and eutrophication has become an important threat to the water quality of the Hanshui River,especially in the middle and lower reaches.The primary objective of this study was to establish the water quality model for the middle and lower reaches of the Hanshui River based on the model of MIKE 11.The main pollutants migration and transformation process could be simulated using the water quality model.The rainfall-runoff model,hy-drodynamic model and water quality model were established using MIKE 11.The pollutants,such as chemical oxygen demand(COD),biochemical oxygen demand(BOD),ammonia nitrogen,nitrate nitrogen,phosphorus,dissolved oxy-gen(DO),were simulated and predicted using the above three models.A set of methods computing non-point source pollution load of the Hanshui River Basin was proposed in this study.The simulated and observed values of COD,BOD5,ammonia,nitrate,DO,and total phosphorus were compared after the parameter calibration of the water quality model.The simulated and observed results match better,thus the model can be used to predict water quality in the fu-ture for the Hanshui River.The pollution trend could be predicted using the water quality model according pollution load generation.It is helpful for government to take effective measures to prevent the water bloom and protect water quality in the river.

Application of a water quality model for determining instream aeration station location and operational rules:A case study

Instream aeration has been used as a supplement to secondary treatment or a substitute for tertiary treatment for meeting dissolved oxygen （DO） standards in rivers. Many studies have used water quality models to determine the number, location, and capacity of instream aeration stations （IASs） needed to meet DO standards in combination with other pollution control measures. DO concentrations have been improved in the North Shore Channel and North Branch Chicago River by the Devon Avenue IAS for more than 35 years. A study was initiated to determine whether it was better to rehabilitate or relocate this station and to determine appropriate operational guidance for the IAS at the selected location. A water quality model capable of simulating DO concentrations during unsteady flow was used to evaluate the proper location for an IAS and operational guidance for this IAS. Three test years, a dry year, a wet year, and an extreme year, were considered in the evaluation. The study found that the Devon Avenue IAS should be rehabilitated as this location performed as well as or better than any of 10 alternative locations. According to the new operational guidance for this IAS, the amount of time with blowers operating could be substantially reduced compared to traditional operations while at the same time the attainment of the DO standards could be increased. This study shows that a carefully designed modeling study is key to effective selection, location, and operation of IASs such that attainment of DO standards can be maximized while operation hours of blowers can be minimized.

A Three-Dimensional Water Quality Model and Its Application to Jiaozhou Bay, China

A three-dimensional coupled physical and water quality model was developed and applied to the Jiaozhou Bay to study water quality involving nutrients, biochemical oxygen demand, dissolved oxygen, and phytoplankton that are closely related to eutrophication process. The physical model is a modified ECOM-si version with inclusion of flooding/draining processes over the intertidal zone. The water quality model is based on WASP5 which quantifies processes governing internal nutrients cycling, dissolved oxygen balance and phytoplankton growth. The model was used to simulate the spatial distribution and the temporal variation of water quality in the Jiaozhou Bay for the period of May 2005 to May 2006. In addition, the effect of reduction of riverine nutrients load was simulated and evaluated. The simulated results show that under the influence of nutrients discharged from river, the concentrations of nutrients and phytoplankton were higher in the northwest and northeast of the bay, and decreased from the inner bay to the outer. Affected by strong tidal mixing, the concentrations of all state variables were vertically homogeneous except in the deeper regions where a small gradient was found. Obvious seasonal variation of phytoplankton biomass was found, which exhibited two peaks in March and July, respectively. The variation of riverine waste loads had remarkable impact on nutrients concentration in coastal areas, but slightly altered the distribution in the center of the bay.

Hyper-spectrum models for monitoring water quality in Dianshan Lake,China

The correlation between water quality parameters and hyper-spectral reflectance is studied with models established for each parameter and applied in Dianshan Lake, in the upstream of the Huangpu River running through Shanghai, China. Models are for dissolved oxygen (DO in mg/L): R720/R680 = 20.362×(R720/R680)2?31.438×(R720/R680)+19.156; for turbidity (NTU): R*714.5 = 206.07× (R*714.5)2?582.5×R*714.5 + 423.24; and for total phosphorus (TP in mg/L): R*509.5 = 16.661× (R*509.5)2?32.646×R*509.5+16.116. The R2 values are 0.770 8, 0.660 4 and 0.738 7, respectively, showing strong positive relationships. The models were then applied to assess water quality of different times. Results are quite satisfactory for some samples.

Three-Dimensional Water Quality Model Based on FVCOM for Total Load Control Management in Guan River Estuary,Northern Jiangsu Province

Guan River Estuary and adjacent coastal area(GREC) suffer from serious pollution and eutrophicational problems over the recent years.Thus,reducing the land-based load through the national pollutant total load control program and developing hydrodynamic and water quality models that can simulate the complex circulation and water quality kinetics within the system,including longitudinal and lateral variations in nutrient and COD concentrations,is a matter of urgency.In this study,a three-dimensional,hydrodynamic,water quality model was developed in GREC,Northern Jiangsu Province.The complex three-dimensional hydrodynamics of GREC were modeled using the unstructured-grid,finite-volume,free-surface,primitive equation coastal ocean circulation model(FVCOM).The water quality model was adapted from the mesocosm nutrients dynamic model in the south Yellow Sea and considers eight compartments:dissolved inorganic nitrogen,soluble reactive phosphorus(SRP),phytoplankton,zooplankton,detritus,dissolved organic nitrogen(DON),dissolved organic phosphorus(DOP),and chemical oxygen demand.The hydrodynamic and water quality models were calibrated and confirmed for 2012 and 2013.A comparison of the model simulations with extensive dataset shows that the models accurately simulate the longitudinal distribution of the hydrodynamics and water quality.The model can be used for total load control management to improve water quality in this area.

Inversion of dispersion coeffcient in water quality model using optimal perturbation algorithm

As a primary parameter in the water quality model for shallow bays, the dispersion coefficient is traditionally determined with a trial-and-error method, which is time-consuming and requires much experience. In this paper, based on the measured data of chemical oxygen demand （COD）, the dispersion coefficient is calculated using an inversion method. In the process, the regularization method is applied to treat the ill-posedness, and an operator identity perturbation method is used to obtain the solu- tion. Using the model with an inverted dispersion coefficient, the distributions of COD, inorganic nitrogen （IN）, and inorganic phosphorus （IP） in Bohai Bay are predicted and compared with the measured data. The results indicate that the method is feasible and the inverted dispersion coefficient can be used to predict other pollutant distribution. This method may also be further extended to the inversion of other parameters in the water quality model.

Discharge Water Quality Models of Storm Runoff in a Catchment

The relationships between the water qualities of nitrogen and phosphorous contents in the discharge water and the discharge of storm runoff of an experimental catchment including terraced paddy field are analyzed based on experiment results of the catchment. By summarizing the currently related research on water quality models, the water quality models of different components of storm runoff of the catchment are presented and verified with the experiment data of water quality analyses and the corresponding discharge of the storm runoffs during 3 storms. Through estimating the specific discharge of storm runoff, the specific load of different components of nitrogen and phosphorus in the discharge water of the catchment can be forecasted by the models. It is found that the mathematical methods of linear regression are very useful for analysis of the relationship between the concentrations of nitrogen and phosphorus and the water discharge of storm runoff. It is also found that the most content of the nitrogen (75%) in the discharge water is organic, while half of the content (49%) of phosphorus in the discharge water is inorganic.

Application of QUAL2K for Water Quality Modeling of River Ghataprabha （India）

River Ghataprabha, during its course through Belgaum district in Karnataka state （India）, receives untreated domestic waste from Gokak town and other neighboring villages situated on the bank of the river. The present study involves the application of water quality model QUAL2K to predict the water quality of this polluted segment of the river. The model was calibrated and validated for biochemical oxygen demand （BOD）, dissolved oxygen （DO） and total nitrogen （TN） in pre-monsoon season. Data for calibration and validation were obtained after the field and laboratory measurements. The performance of the model was evaluated using statistics based on standard errors （SE） and mean multiplicative errors （MME）. The model represented the field data quite well with some exceptions. In spite of some differences between the measured and simulated data sets at some points, the calibration and validation results are acceptable especially for the developing countries where the financial resources are often limited for frequent monitoring campaigns and higher accuracy data analysis.

Incorporating sorption/desorption of organic pollutants into river water quality model

Preliminary research was conducted about how to incorporate sorption/desorption of organic pollutants with suspended solids and sediments into single-chemical and one-dimensional water quality model of Jinghang Canal. Sedimentation-resuspension coefficient k 3 was deduced; characteristics of organic pollutants, concentrations and components of suspended solids/sediments and hydrological and hydraulic conditions were integrated into k 3 and further into river water quality model; impact of sorption/desorption of organic pollutants with suspended solids and sediments on prediction function of the model was discussed. Results demonstrated that this impact is pronounced for organic pollutants with relatively large K oc and K ow, especially when they are also conservative and f oc of river suspended solids/sediments is high, and that incorporation of sorption/ desorption of organic pollutants into river water quality model can improve its prediction accuracy.

River Water Quality Model Based on Remote Sensing Information Methods——A Case Study of Lijing River in Guilin City

River water quality models based on remote sensing information models are superior to pure water quality models because they combine the inevitability and risk of geographical phenomena and can take complex geographical characteristics into account. A water quality model for forecasting COD has been established with remote sensing in- formation modeling methods by monitoring and analyzing water quantity and water quality of the Lijing River reach which flows through a complicated Karst mountain area. This model provides a good tool to predict water quality of complex rivers. It is validated by simulating contaminant concentrations of the study area. The results show that remote sensing information models are suitable for complex geography. It is not only a combined model of inevitability and risk of the geographical phenomena, but also a semi-theoretical and semi-empirical formula, providing a good tool to study organic contaminants in complicated rivers. The coefficients and indices obtained have limited value and the model is not suitable for all situations. Some improvements are required.

Water quality changing trends of the Miyun Reservoir

In order to simulate changes in the water quality of the Miyun Reservoir dueto continuous descent of surface water level, a 3-D ecological hydrodynamic model was developedthrough coupling the water quality analysis simulation program (WASP) with the environmental fluiddynamics code (EFDC). The model was then calibrated and verified. Four scenarios (S1, S21, S22 andS23) were simulated using the model. Results show that the water quality of the Miyun Reservoirunder conditions of low surface water level is apparently affected by different amounts of inflowand different total phosphorus (TP) loadings. The chlorophyll-a concentration might exceed 10 μg/Lin many areas of the Miyun Reservoir (This limitative value is seen as a critical value ofeutrophication) when large loadings of TP enter due to the amount of inflow increasing. Results ofscenario S23 indicate that control of TP loadings can decrease chlorophyll-a concentrationeffectively, and the water quality of the Miyun Reservoir will improve or retain its status quo.

Compounding soils to improve cropland quality:A study based on field experiments and model simulations in the loess hilly-gully region,China

Increasing the quantity and improving the quality of cropland can alleviate the human-land contradiction and promote the sustainable development of agriculture especially in mountainous areas.With the support of the central government’s policies,Yan’an,Northern Shaanxi,China implemented a major land consolidation engineering project in the loess hilly-gully region from 2013 to 2018,achieving 33,333.3 ha of new cropland.However,the poor quality of some newly-constructed cropland at the initial stage hindered its efficient utilization.In order to overcome this problem,red clay and Malan loess were compounded in different volume ratios to explore the method to improve the cropland quality.The Root Zone Water Quality Model was used to simulate the effects of different soil treatments on soil water,nitrogen and maize growth.Experimental data were collected from 2018 to 2019 to calibrate and validate the model.The root mean square error(RMSE)of soil water content,nitrate nitrogen concentration,above-ground biomass,leaf area index were in the range of 11.72-14.06 mm,4.06-11.73 mg kg^(-1),835.21-1151.28 kg ha^(-1)and 0.24-0.47,respectively,while the agreement index(d)between measured and simulated values ranged from 0.70 to 0.96.It was showed that,compared with land constructed with Malan loess only(T1),the soil structure and hydraulic characteristics of land with a volume ratio of red clay and Malan loess of 2:1(T3)was better.Simulation indicated that,compared with T1,the soil water content and available water content of T3 increased by 14.4%and 19.0%,respectively,while N leaching decreased by 16.9%.The aboveground biomass and maize yield of T3 were 7.9%and 6.7%higher than that of T1,respectively.Furthermore,the water productivity and nitrogen use efficiency of T3 increased by 21.0%and 16.6%compared with that of T1.These results indicated that compounding red clay and Malan loess in an appropriate ratio was an effective method to improve soil quality.This study provides a technical idea and specific technical parameters for the construction or improvement of cropland in loess hilly-gully region,which may also provide reference for similar projects in other places.

Reuse rate of treated wastewater in water reuse system

A water quality model for water reuse was made by mathematics induction. The relationship among the reuse rate of treated wastewater（R）, pollutant concentration of reused water（ Cs ）, pollutant concentration of influent（ C0）, removal efficiency of pollutant in wastewater（ E）, and the standard of reuse water were discussed in this study. According to the experiment result of a toilet wastewater treatment and reuse with membrane bioreactors, R would be set at less than 40%, on which all the concerned parameters could meet with the reuse water standards. To raise R of reuse water in the toilet, an important way was to improve color removal of the wastewater.

The Influence and Implications of Climate Change on Water Quality in a Large Water Reservoir in the Southwest, USA

Maintaining water quality in large reservoirs is crucial to ensure continued delivery of high-quality water to consumers for municipal and agricultural needs. Lake Mead, a large reservoir in the desert southwest, USA, is projected to be affected by both loss of volume and rising air temperatures through the end of the 21st century. In this study, reductions in lake volume, coupled with downscaled climate projections for rising air temperatures through the end of the 21st century, are incorporated into the 3D hydrodynamic and water quality model for Lake Mead. If current management practices continue in the future, simulations indicate water temperatures will increase in all scenarios and could increase by as much 2℃under the most pessimistic scenarios, but nutrient loads would not increase to concerning levels. Releases from the dam to downstream users are projected to be much warmer, and warmer water temperatures and significant dissolved oxygen in the water column are expected to cause challenges for ecosystem and recreation in the future. Surprisingly, during the Winter and Autumn, retention of heat in Lake Mead is more pronounced at higher surface elevations than the lower elevations as expected. The effects of these projections on the lake water quality and consequently, lake management decisions, are discussed.

Water quality prediction based on sparse dataset using enhanced machine learning

Water quality in surface bodies remains a pressing issue worldwide.While some regions have rich water quality data,less attention is given to areas that lack sufficient data.Therefore,it is crucial to explore novel ways of managing source-oriented surface water pollution in scenarios with infrequent data collection such as weekly or monthly.Here we showed sparse-dataset-based prediction of water pollution using machine learning.We investigated the efficacy of a traditional Recurrent Neural Network alongside three Long Short-Term Memory(LSTM)models,integrated with the Load Estimator(LOADEST).The research was conducted at a river-lake confluence,an area with intricate hydrological patterns.We found that the Self-Attentive LSTM(SA-LSTM)model outperformed the other three machine learning models in predicting water quality,achieving Nash-Sutcliffe Efficiency(NSE)scores of 0.71 for COD_(Mn)and 0.57 for NH_(3)N when utilizing LOADEST-augmented water quality data(referred to as the SA-LSTMLOADEST model).The SA-LSTM-LOADEST model improved upon the standalone SA-LSTM model by reducing the Root Mean Square Error(RMSE)by 24.6%for COD_(Mn)and 21.3%for NH_(3)N.Furthermore,the model maintained its predictive accuracy when data collection intervals were extended from weekly to monthly.Additionally,the SA-LSTM-LOADEST model demonstrated the capability to forecast pollution loads up to ten days in advance.This study shows promise for improving water quality modeling in regions with limited monitoring capabilities.

Relation Matrix of Water Exchange for Sea Bays and Its Application

Water exchange is an important hydrodynamic character of sea bays, and it is the basis for the study of the environmental capacity of sea bays. In this paper, a relation matrix is set up to describe the interaction among different areas of a sea bay, and to predict the water quality of those areas. The relation matrix is calculated based on the numerical results from a water quality model. This method is applied to the study of water exchange and the prediction of water quality of the Bohai Sea. The Bohai Sea is divided into five areas, and the effect of seasonal wind is taken into consideration. The results show a） the relation matrix can be used to study the water exchange among different areas and predict water quality of different areas at the respective characteristic time, b） the reduction of pollutant is dependent on both water exchange and initial distribution of the pollutant, and c） the half-life time of the pollutant is longer than the half-exchange time of the sea water.