Recent advances and future prospects on Ni_(3)S_(2)-Based electrocatalysts for efficient alkaline water electrolysis

Green hydrogen(H_(2))produced by renewable energy powered alkaline water electrolysis is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.However,efficient and economic H_(2) production by alkaline water electrolysis is hindered by the sluggish hydrogen evolution reaction(HER)and oxygen evolution reaction(OER).Therefore,it is imperative to design and fabricate high-active and low-cost non-precious metal catalysts to improve the HER and OER performance,which affects the energy efficiency of alkaline water electrolysis.Ni_(3)S_(2) with the heazlewoodite structure is a potential electrocatalyst with near-metal conductivity due to the Ni–Ni metal network.Here,the review comprehensively presents the recent progress of Ni_(3)S_(2)-based electrocatalysts for alkaline water electrocatalysis.Herein,the HER and OER mechanisms,performance evaluation criteria,preparation methods,and strategies for performance improvement of Ni_(3)S_(2)-based electrocatalysts are discussed.The challenges and perspectives are also analyzed.

Covalently Bonded Ni Sites in Black Phosphorene with Electron Redistribution for Efficient Metal‑Lightweighted Water Electrolysis

The metal-lightweighted electrocatalysts for water splitting are highly desired for sustainable and economic hydrogen energy deployments,but challengeable.In this work,a low-content Ni-functionalized approach triggers the high capability of black phosphorene(BP)with hydrogen and oxygen evolution reaction(HER/OER)bifunctionality.Through a facile in situ electro-exfoliation route,the ionized Ni sites are covalently functionalized in BP nanosheets with electron redistribution and controllable metal contents.It is found that the as-fabricated Ni-BP electrocatalysts can drive the water splitting with much enhanced HER and OER activities.In 1.0 M KOH electrolyte,the optimized 1.5 wt%Nifunctionalized BP nanosheets have readily achieved low overpotentials of 136 mV for HER and 230 mV for OER at 10 mA cm^(−2).Moreover,the covalently bonding between Ni and P has also strengthened the catalytic stability of the Ni-functionalized BP electrocatalyst,stably delivering the overall water splitting for 50 h at 20 mA cm^(−2).Theoretical calculations have revealed that Ni–P covalent binding can regulate the electronic structure and optimize the reaction energy barrier to improve the catalytic activity effectively.This work confirms that Ni-functionalized BP is a suitable candidate for electrocatalytic overall water splitting,and provides effective strategies for constructing metal-lightweighted economic electrocatalysts.

A novel multi-channel porous structure facilitating mass transport towards highly efficient alkaline water electrolysis

An advantageous porous architecture of electrodes is pivotal in significantly enhancing alkaline water electrolysis(AWE)efficiency by optimizing the mass transport mechanisms.This effect becomes even more pronounced when aiming to achieve elevated current densities.Herein,we employed a rapid and scalable laser texturing process to craft novel multi-channel porous electrodes.Particularly,the obtained electrodes exhibit the lowest Tafel slope of 79 mV dec^(-1)(HER)and 49 mV dec^(-1)(OER).As anticipated,the alkaline electrolyzer(AEL)cell incorporating multi-channel porous electrodes(NP-LT30)exhibited a remarkable improvement in cell efficiency,with voltage drops(from 2.28 to 1.97 V)exceeding 300 mV under 1 A cm^(-1),compared to conventional perforated Ni plate electrodes.This enhancement mainly stemmed from the employed multi-channel porous structure,facilitating mass transport and bubble dynamics through an innovative convection mode,surpassing the traditional convection mode.Furthermore,the NP-LT30-based AEL cell demonstrated exceptional durability for 300 h under 1.0 A cm^(-2).This study underscores the capability of the novel multi-channel porous electrodes to expedite mass transport in practical AWE applications.

Development of advanced anion exchange membrane from the view of the performance of water electrolysis cell

Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.

Manipulating d-d orbital hybridization induced by Mo-doped Co_(9)S_(8) nanorod arrays for high-efficiency water electrolysis

Precisely refining the electronic structure of electrocatalysts represents a powerful approach to further optimize the electrocatalytic performance.Herein,we demonstrate an ingenious d-d orbital hybridization concept to construct Mo-doped Co_(9)S_(8) nanorod arrays aligned on carbon cloth(CC)substrate(abbreviated as Mo-Co_(9)S_(8)@CC hereafter)as a high-efficiency bifunctional electrocatalyst toward water electrolysis.It has experimentally and theoretically validated that the 4d-3d orbital coupling between Mo dopant and Co site can effectively optimize the H_(2)O activation energy and lower H^(*)adsorption energy barrier,thereby leading to enhanced hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)activities.Thanks to the unique electronic and geometrical advantages,the optimized Mo-Co_(9)S_(8)@CC with appropriate Mo content exhibits outstanding bifunctional performance in alkaline solution,with the overpotentials of 75 and 234 mV for the delivery of a current density of 10 mA cm^(-2),small Tafel slopes of 53.8 and 39.9 mV dec~(-1)and long-term stabilities for at least 32 and 30 h for HER and OER,respectively.More impressively,a water splitting electrolylzer assembled by the self-supported Mo-Co_(9)S_(8)@CC electrode requires a low cell voltage of 1.53 V at 10 mA cm^(-2)and shows excellent stability and splendid reversibility,demonstrating a huge potential for affordable and scalable electrochemical H_(2) production.The innovational orbital hybridization strategy for electronic regulation herein provides an inspirable avenue for developing progressive electrocatalysts toward new energy systems.

Towards high-performance and robust anion exchange membranes(AEMs)for water electrolysis:Super-acid-catalyzed synthesis of AEMs

The increasing demand for hydrogen energy to address environmental issues and achieve carbon neutrality has elevated interest in green hydrogen production,which does not rely on fossil fuels.Among various hydrogen production technologies,anion exchange membrane water electrolyzer(AEMWE)has emerged as a next-generation technology known for its high hydrogen production efficiency and its ability to use non-metal catalysts.However,this technology faces significant challenges,particularly in terms of the membrane durability and low ionic conductivity.To address these challenges,research efforts have focused on developing membranes with a new backbone structure and anion exchange groups to enhance durability and ionic conductivity.Notably,the super-acid-catalyzed condensation(SACC)synthesis method stands out due to its user convenience,the ability to create high molecular weight(MW)polymers,and the use of oxygen-tolerant organic catalysts.Although the synthesis of anion exchange membranes(AEMs)using the SACC method began in 2015,and despite growing interest in this synthesis approach,there remains a scarcity of review papers focusing on AEMs synthesized using the SACC method.The review covers the basics of SACC synthesis,presents various polymers synthesized using this method,and summarizes the development of these polymers,particularly their building blocks including aryl,ketone,and anion exchange groups.We systematically describe the effects of changes in the molecular structure of each polymer component,conducted by various research groups,on the mechanical properties,conductivity,and operational stability of the membrane.This review will provide insights into the development of AEMs with superior performance and operational stability suitable for water electrolysis applications.

Epitaxially Grown Ru Clusters-Nickel Nitride Heterostructure Advances Water Electrolysis Kinetics in Alkaline and Seawater Media

The epitaxial heterostructure can be rationally designed based on the in situ growth of two compatible phases with lattice similarity,in which the modulated electronic states and tuned adsorption behaviors are conducive to the enhancement of electrocatalytic activity.Herein,theoretical simulations first disclose the charge transfer trend and reinforced inherent electron conduction around the epitaxial heterointerface between Ru clusters and Ni_(3)N substrate(cRu-Ni_(3)N),thus leading to the optimized adsorption behaviors and reduced activation energy barriers.Subsequently,the defectrich nanosheets with the epitaxially grown cRu-Ni_(3)N heterointerface are successfully constructed.Impressively,by virtue of the superiority of intrinsic activity and reaction kinetics,such unique epitaxial heterostructure exhibits remarkable bifunctional catalytic activity toward electrocatalytic OER(226 mV@20 mA cm^(−2))and HER(32 mV@10 mA cm^(−2))in alkaline media.Furthermore,it also shows great application prospect in alkaline freshwater and seawater splitting,as well as solar-to-hydrogen integrated system.This work could provide beneficial enlightenment for the establishment of advanced electrocatalysts with epitaxial heterointerfaces.

Recent Advances of Transition Metal Basic Salts for Electrocatalytic Oxygen Evolution Reaction and Overall Water Electrolysis

Electrocatalytic oxygen evolution reaction(OER)has been recognized as the bottleneck of overall water splitting,which is a promising approach for sustainable production of H_(2).Transition metal(TM)hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER,while TM basic salts[M^(2+)(OH)_(2-x)(A_(m^(-))_(x/m),A=CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)]consisting of OH−and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade.In this review,we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting.We categorize TM basic salt-based OER pre-catalysts into four types(CO_(3)^(2−),NO_(3)^(−),F^(−),Cl^(−)according to the anion,which is a key factor for their outstanding performance towards OER.We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance.To develop bifunctional TM basic salts as catalyst for the practical electrolysis application,we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance.Finally,we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.

Enhancing water-dissociation kinetics and optimizing intermediates adsorption free energy of cobalt phosphide via high-valence Zr incorporating for alkaline water electrolysis

Developing high-efficiency electrocatalysts for hydrogen evolution reaction(HER) and oxygen evolution reaction(OER) is required to enhance the sluggish kinetics of water dissociation and optimize the adsorption free energy of reaction intermediates.Herein,we tackle this challenge by incorporating high-valence Zr into CoP(ZrxCo_(1-x)P),which significantly accelerates the elementary steps of water electrolysis.Theoretical calculations indicate that the appropriate Zr incorporation effectively expedites the sluggish H2O dissociation kinetics and optimizes the adsorption energy of reaction intermediates for boosting the alkaline water electrolysis.These are confirmed by the experimental results of Zr_(0.06)Co_(0.94)P catalyst that delivers exceptional electrochemical activity.The overpotentials at the current density of 10 mA cm^(-2)(j10) are only 62(HER) and 240 mV(OER) in alkaline media.Furthermore,the Zr_(0.06)Co_(0.94)P/CC‖Zr_(0.06)Co_(0.94)P/CC system exhibits superior overall water splitting activity(1.53 V/j10),surpassing most of the reported bifunctional catalysts.This high-valence Zr incorporation and material design methods explore new avenues for realizing high-performance non-noble metal electrocatalysts.

Bifunctional PdPt bimetallenes for formate oxidation-boosted water electrolysis

Small-molecule electrooxidation-boosted water electrolysis(WE)is an energy-saving method for hydrogen(H2)production.Herein,PdPt bimetallenes(PdPt BMLs)are obtained through the simple galvanic replacement reaction.PdPt BMLs reveal 2.93-fold enhancement in intrinsic electroactivity and 4.53-fold enhancement in mass electroactivity for the formate oxidation reaction(FOR)with respect to Pd metallenes(Pd MLs)at 0.50 V potential due to the synergistic effect.Meanwhile,the introduction of Pt atoms also considerably increases the electroactivity of PdPt BMLs for hydrogen evolution reaction(HER)with respect to Pd MLs in an alkaline medium,which even exceeds that with the use of commercial Pt nanocrystals.Inspired by the outstanding FOR and HER electroactivity of bifunctional PdPt BMLs,a two-electrode FOR-boosted WE system(FOR-WE)is constructed by using PdPt BMLs as the cathode and the anode.The FOR-WE system only requires an operational voltage of 0.31 V to achieve H2 production,which is 1.48 V lower than that(ca.1.79 V)with the use of the traditional WE system.

Handily etching nickel foams into catalyst-substrate fusion self‐stabilized electrodes toward industrial‐level water electrolysis

The key challenge of industrial water electrolysis is to design catalytic electrodes that can stabilize high current density with low power consumption(i.e.,overpotential),while industrial harsh conditions make the balance between electrode activity and stability more difficult.Here,we develop an efficient and durable electrode for water oxidation reaction(WOR),which yields a high current density of 1000 mA cm−2 at an overpotential of only 284 mV in 1M KOH at 25°C and shows robust stability even in 6M KOH strong alkali with an elevated temperature up to 80°C.This electrode is fabricated from a cheap nickel foam(NF)substrate through a simple one-step solution etching method,resulting in the growth of ultrafine phosphorus doped nickel-iron(oxy)hydroxide[P-(Ni,Fe)O_(x)H_(y)]nanoparticles embedded into abundant micropores on the surface,featured as a self-stabilized catalyst–substrate fusion electrode.Such self-stabilizing effect fastens highly active P-(Ni,Fe)O_(x)H_(y)species on conductive NF substrates with significant contribution to catalyst fixation and charge transfer,realizing a win–win tactics for WOR activity and durability at high current densities in harsh environments.This work affords a cost-effective WOR electrode that can well work at large current densities,suggestive of the rational design of catalyst electrodes toward industrial-scale water electrolysis.

Copper foam-derived electrodes as efficient electrocatalysts for conventional and hybrid water electrolysis

Electrochemical water splitting has been demonstrated as a promising technology for the renewable generation of green hydrogen from water.Despite the extensive progress in materials science,one particular challenge for further development towards industrial application lies in the rational design and exploitation of efficient and cost-effective materials,especially oxygen evolution reaction(OER)electrocatalysts at the anode.In addition,attempts to replace the OER with other more oxidizable anode reactions are being evaluated as a groundbreaking strategy for generating hydrogen at lower potentials and reducing overall energy costs while producing valuable chemicals simultaneously.Compared with Fe/Co/Ni-based compounds,Cu-based materials have not received extensive research attention for electrode designs despite their high conductivity and abundant earth reserves.In this review,combining with the advantages of a three-dimensional network structure of metal foams,we summarize recent progress on Cu foam(CF)-derived materials as efficient electrocatalysts towards pure water electrolysis and hybrid water electrolysis.The advantages of CF and design strategies to enhance the electrocatalytic activity and operational durability are presented first.Catalyst design and fabrication strategies are then highlighted and the structure-activity relationship is also discussed.Finally,we propose challenges and perspectives on self-supported electrodes beyond CF-derived materials.

Ternary layered double hydroxide oxygen evolution reaction electrocatalyst for anion exchange membrane alkaline seawater electrolysis

Anion exchange membrane(AEM)water electrolyzers are promising energy devices for the production of clean hydrogen from seawater.However,the lack of active and robust electrocatalysts for the oxygen evolution reaction(OER)severely impedes the development of this technology.In this study,a ternary layered double hydroxide(LDH)OER electrocatalyst(NiFeCo-LDH)is developed for high-performance AEM alkaline seawater electrolyzers.The AEM alkaline seawater electrolyzer catalyzed by the NiFeCo LDH shows high seawater electrolysis performance(0.84 A/cm^(2)at 1.7 Vcell)and high hydrogen production efficiency(77.6%at 0.5 A/cm^(2)),thus outperforming an electrolyzer catalyzed by a benchmark IrO_(2)electrocatalyst.The NiFeCo-LDH electrocatalyst greatly improves the kinetics of the AEM alkaline seawater electrolyzer,consequently reducing its activation loss and leading to high performance.Based on the results,this NiFeCo-LDH-catalyzed AEM alkaline seawater electrolyzer can likely surpass the energy conversion targets of the US Department of Energy.

N‑Doped Graphene‑Decorated NiCo Alloy Coupled with Mesoporous NiCoMoO Nano‑sheet Heterojunction for Enhanced Water Electrolysis Activity at High Current Density

Developing highly effective and stable non-noble metalbased bifunctional catalyst working at high current density is an urgent issue for water electrolysis(WE).Herein,we prepare the N-doped graphene-decorated NiCo alloy coupled with mesoporous NiCoMoO nano-sheet grown on 3D nickel foam(NiCo@C-NiCoMoO/NF)for water splitting.NiCo@C-NiCoMoO/NF exhibits outstanding activity with low overpotentials for hydrogen and oxygen evolution reaction(HER:39/266 mV;OER:260/390 mV)at±10 and±1000 mA cm^(−2).More importantly,in 6.0 M KOH solution at 60℃ for WE,it only requires 1.90 V to reach 1000 mA cm−2 and shows excellent stability for 43 h,exhibiting the potential for actual application.The good performance can be assigned to N-doped graphene-decorated NiCo alloy and mesoporous NiCoMoO nano-sheet,which not only increase the intrinsic activity and expose abundant catalytic activity sites,but also enhance its chemical and mechanical stability.This work thus could provide a promising material for industrial hydrogen production.

Shining Light on Anion-Mixed Nanocatalysts for Efficient Water Electrolysis: Fundamentals, Progress, and Perspectives

Hydrogen with high energy density and zero carbon emission is widely acknowledged as the most promising candidate toward world’s carbon neutrality and future sustainable eco-society.Water-splitting is a constructive technology for unpolluted and high-purity H2 production,and a series of non-precious electrocatalysts have been developed over the past decade.To further improve the catalytic activities,metal doping is always adopted to modulate the 3d-electronic configuration and electron-donating/accepting(e-DA)properties,while for anion doping,the electronegativity variations among different non-metal elements would also bring some potential in the modulations of e-DA and metal valence for tuning the performances.In this review,we summarize the recent developments of the many different anion-mixed transition metal compounds(e.g.,nitrides,halides,phosphides,chalcogenides,oxyhydroxides,and borides/borates)for efficient water electrolysis applications.First,we have introduced the general information of water-splitting and the description of anion-mixed electrocatalysts and highlighted their complementary functions of mixed anions.Furthermore,some latest advances of anion-mixed compounds are also categorized for hydrogen and oxygen evolution electrocatalysis.The rationales behind their enhanced electrochemical performances are discussed.Last but not least,the challenges and future perspectives are briefly proposed for the anion-mixed water dissociation catalysts.

Catalyst Engineering for Electrochemical Energy Conversion from Water to Water:Water Electrolysis and the Hydrogen Fuel Cell

In the context of the current serious problems related to energy demand and climate change,substantial progress has been made in developing a sustainable energy system.Electrochemical hydrogen-water conversion is an ideal energy system that can produce fuels via sustainable,fossil-free pathways.However,the energy conversion efficiency of two functioning technologies in this energy system—namely,water electrolysis and the fuel cell—still has great scope for improvement.This review analyzes the energy dissipation of water electrolysis and the fuel cell in the hydrogen-water energy system and discusses the key barriers in the hydrogen-and oxygen-involving reactions that occur on the catalyst surface.By means of the scaling relations between reactive intermediates and their apparent catalytic performance,this article summarizes the frameworks of the catalytic activity trends,providing insights into the design of highly active electrocatalysts for the involved reactions.A series of structural engineering methodologies(including nano architecture,facet engineering,polymorph engineering,amorphization,defect engineering,element doping,interface engineering,and alloying)and their applications based on catalytic performance are then introduced,w让h an emphasis on the rational guidance from previous theoretical and experimental studies.The key scientific problems in the electrochemical hydrogen-water conversion system are outlined,and future directions are proposed for developing advanced catalysts for technologies with high energy-conversion efficiency.

Novel polybenzimidazole/graphitic carbon nitride nanosheets composite membrane for the application of acid-alkaline amphoteric water electrolysis

It is a great challenge to develop membrane materials with high performance and long durability for acidalkaline amphoteric water electrolysis.Hence,the graphitic carbon nitride(g-C_(3)N_(4))nanosheets were compounded with the(2,2'-m-phenylene)-5,5'-benzimidazole(m-PBI)matrix for the preparation of m-PBI/g-C_(3)N_(4) composite membranes.The synthesis of g-C_(3)N_(4) nanosheets and m-PBI matrix have been confirmed by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscoy(TEM)and ^(1)H nuclear magnetic resonance spectra(^(1)H NMR),respectively.The fourier transform infrared spectroscopy(FT-IR)and SEM of the composite membranes showed the g-C_(3)N_(4) nanosheets were well dispersed in the m-PBI/g-C_(3)N_(4) composite membrane.The mechanical properties test exhibited the good mechanical strength,and the TGA curves of m-PBI showed the high thermal stability of composite membranes.Besides,the m-PBI/g-C_(3)N_(4) composite membrane showed excellent proton and hydroxide ion conductivity,which was higher than pure m-PBI and Nafion 115 membrane.The acid-alkaline amphoteric water electrolysis test showed m-PBI/1%g-C_(3)N_(4) composite membrane has the best performance with a current density of 800 mA cm^(-2) at cell voltage of 1.98 V at 20℃.It showed that m-PBI/g-C_(3)N_(4) composite membrane has a good application prospect for acid-alkaline amphoteric water electrolysis.

Novel Au nanoparticles-inlaid titanium paper for PEM water electrolysis with enhanced interfacial electrical conductivity

Proton-exchange membrane water electrolysis(PEM WE)is a particularly promising technology for renewable hydrogen produc-tion.However,the excessive passivation of the gas diffusion layer(GDL)will seriously affect the high surface-contact resistance and result in energy losses.Thus,a mechanism for improving the conductivity and interface stability of the GDL is an urgent issue.In this work,we have prepared a hydrophilic and corrosion resistant conductive composite protective coating.The polydopamine(PDA)film on the Ti surface,which was obtained via the solution oxidation method,ensured that neither micropores nor pinholes existed in the final hybrid coatings.In-situ reduced gold nanoparticles(AuNPs)improved the conductivity to achieve the desired interfacial contact resistance and further enhanced the corrosion resistance.The surface composition of the treated samples was investigated using scanning electron microscopy(SEM),transmis-sion electron microscopy(TEM),X-ray diffraction(XRD),and Fourier transform infrared spectroscopy(FTIR).The results indicated that the optimized reaction conditions included a pH value of 3 of HAuCl_(4) solution with PDA deposition(48 h)on papers and revealed the lowest con-tact resistance(0.5 mΩ·cm^(2))and corrosion resistance(0.001μA·cm^(−2))in a 0.5 M H_(2)SO_(4)+2 ppm F−solution(1.7 V vs.RHE)among all the modified specimens,where RHE represents reversible hydrogen electrode.These findings indicated that the Au-PDA coating is very appropriate for the modification of Ti GDLs in PEM WE systems.

Fabrication of Porous Nanocrystalline NiCo_2O_4 Electrode for Water Electrolysis

A porous nanocrystalline NiCo_2O_4 compound electrode was obtained.The morphology of the electrode was controlled by altering the concentration of precipitant (NaOH solution).The electrode was consisted of metal substrate (Ni) and porous nanocrystalline NiCo_2O_4 film which was stacked by homosized and pretty regular hexagonal nanoparticles,with thinner than 50 nm and about 200 nm in diameter.The electrode exhibits good electrochemical properties compared with Ni electrode.

Electronic Coupling of Single Atom and FePS_3 Boosts Water Electrolysis

Engineering the electronic structure of surface active sites at the atomic level can be an efficient way to modulate the reactivity of catalysts.Herein,we report the rational tuning of surface electronic structure of FePS_(3) nanosheets(NSs)by anchoring atomically dispersed metal atom.Theoretical calculations predict that the strong electronic coupling effect in single-atom Ni-FePS_(3) facilitates electron aggregation from Fe atom to the nearby Ni-S bond and enhances the electron-transfer of Ni and S sites,which balances the oxygen species adsorption capacity,reinforces water adsorption and dissociation process to accelerate corresponding oxygen evolution reaction(OER)and hydrogen evolution reaction(HER).The optimal Ni-FePS_(3)NSs/C exhibits outstanding electrochemical water-splitting activities,delivering an overpotential of 287 mV at the current density of 10 mA cm^(-2) and a Tafel slope of 41.1 mV dec^(-1) for OER;as well as an overpotential decrease of 219 mV for HER compared with pure FePS_(3)NSs/C.The concept of electronic coupling interaction between the substrate and implanted single active species offers an additional method for catalyst design and beyond.