A numerical study on water diversion ratio of the Changjiang(Yangtze)estuary in dry season

We studied the flood, ebb and tidal averaged along (net) water diversion ratio (WDR) during dry season in the Changjiang (Yangtze) estuary, China, along with the effects of northerly wind, river discharge, tide and their interactions on WDR using the improved version of three-dimensional numerical model ECOM. Using data for annual mean wind speed and river discharge during January, we determined that the flood, ebb, net WDR values in the North Branch of the estuary were 3.48%, 1.68%,-4.06% during spring tide, and 4.82%, 2.34%,-2.79% during neap tide, respectively. Negative net WDR values denote the transport of water from the North Branch into the South Branch. Using the same data, the corresponding ratios were 50.09%, 50.92%, 54.97%, and 52.33%, 50.15%, 43.86% in the North Channel and 38.56%, 44.78%, 103.96%, and 36.92%, 43.17%, 60.97% in the North Passage, respectively. When northerly wind speed increased, landward Ekman transport was enhanced in the North Branch, increasing the flood WDR, while the ebb WDR declined and the net WDR exhibited a significant decrease. Similarly, in the North Channel, the flood WDR is increased, the ebb WDR reduced, and the net WDR showed a marked decrease. In the North Passage, the flood WDR also increased while the ebb and net WDR declined. As the river discharge increased, the flood and ebb WDR of the North Branch increased slightly and the net WDR increased markedly. In the North Channel the flood and ebb WDR changed very slightly, while the net WDR declined during spring tides and increased during neap tides. The WDR in the North Passage changed slightly during flood and ebb tides while the net WDR showed a marked increase. The WDR values of different bifurcations and the responses to northerly wind, river discharge, and tide are discussed in comparison with variations in river topography, horizontal wind-induced circulation, and tidal-induced residual current.

Effect of Hydration Aging and Water Binder Ratio on Microstructure and Mechanical Properties of Sprayed Concrete

In order to study the durability of sprayed concrete （shotcrete）, effects of different hydration aging and water-binder ratio （w/b） on the microstructure of cement paste and basic mechanical properties of test specimens were investigated. The phase composition, mass percentage of ettringite and portland in hydration production and microstructure were characterized by X-ray diffraction （XRD）, thermo gravimetry-differential scanning calorimetry （TG-DSC） and scanning electron microscopy （SEM）, respectively. The experimental results showed that changes in phase composition was more significant than those of water-binder ratio. With hydration aging and water-binder ratio increased, the mass percentage of ettringite and portland was decreased from 4.42%, 1.49% to 3.31%, 1.35%, respectively and the microstructure of paste was significantly compacted. Likewise, the mechanical properties including cubic compressive strength and splitting tensile strength were rised obviously.

Effects of Water/Binder Ratio on the Properties of Engineered Cementitious Composites

The effects of water/binder ratio （w/b） on the toughness behavior, compressive strength and flexural strength of engineered cementitious composites （ECC） were investigated. The w/b ratios of 0.25, 0.31, 0.33 and 0.37 were selected and the specimens were tested at the ages of 7 d and 28 d. The experimental results showed that there was a corresponding increase in first cracking strength, modulus of rupture, compressive strength and flexural strength with the decrease of w/b. Within the w/b range of 0.25-0.37, higher w/b was found to have improved effects on deflection, strain hardening index and toughness index of ECC. In the permission of meeting the requirement of compressive strength grade, selecting higher w/b in mix design will help to obtain robust ECC.

Relation between soil matrix potential changes and water conversion ratios during methane hydrate formation processes in loess

With a new apparatus designed and assembled by ourselves, the matrix potential of non-saturated loess was firstly measured and studied during methane hydrate formation processes. The experimental results showed that during two formation processes, the matrix potential changes of the loess all presented a good linear relationship with water conversion ratios. In addition, although it was well known that the secondary gas hydrate formation was easier than the initial, our experimental results showed that the initial hydrate formation efficiency in non-saturated loess was higher than that of the secondary.

A Simple Cement Hydration Model Considering the Influences ofWater-to-Cement Ratio and Mineral Composition

A simple hydration model is used here by taking the composition of the cement and the initial water: cementratio (w/c) into account explicitly. Its conceptual basis is a combination of the Avrami equation and Bentz’s modelbased on simple spatial considerations. In this model, the Avrami equation determines the initial reaction, andBentz’s model describes the following hydration stage. The model favors engineers for it relies on one experimentalparameter and has a reliable approximation in the practice.

Determination of water equivalent ratio for some dosimetric materials in proton therapy using MNCPX simulation tool

The water equivalent ratio(WER) was calculated for polypropylene(PP), paraffin, polyethylene(PE), polystyrene(PS), polymethyl methacrylate(PMMA), and polycarbonate materials with potential applications in dosimetry and medical physics. This was performed using the Monte Carlo simulation code, MCNPX, at different proton energies. The calculated WER values were compared with National Institute of Standards and Technology(NIST) data, available experimental and analytical results,as well as the FLUKA, SRIM, and SEICS codes. PP and PMMA were associated with the minimum and maximum WER values, respectively. Good agreement was observed between the MCNPX and NIST data. The biggest difference was 0.71% for PS at 150 MeV proton energy. In addition, a relatively large positive correlation between the WER values and the electron density of the dosimetric materials was observed. Finally, it was noted that PE presented the most analogous Depth Dose Characteristics to liquid water.

Effect of water absorption ratio on tensile strength of red sandstone and morphological analysis of fracture surfaces

Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.

Form and Mechanism of Sulfate Attack on Cement-based Material Made of Limestone Powder at Low Water-binder Ratio under Low Temperature Conditions

The development of strength and the form of attack of cement-based material made of limestone powder at low water-binder ratio under low-temperature sulfate environment were studied. The results indicate that when water-binder ratio is lower than 0.40, the cement-based material with limestone powder has insignificant change in appearance after being soaked in 10% magnesium sulfate solution at low temperature for 120 d, and has significant change in appearance after being soaked at the age of 200 d. Expansion damage and exfoliation occur on the surface of concrete test cube at different levels. When limestone powder accounts for about 28 percent of cementitious material, with the decrease of water-binder ratio, the compressive strength loss has gradually decreased after the material is soaked in the magnesium sulfate solution at low temperature at the age of 200 d. After the specimen with the water-binder ratio of less than 0.4 and the limestone powder volume of greater than 20% is soaked in 10% magnesium sulfate solution at low temperature at the age of 200 d, gypsum attack-led destruction is caused to the concrete test cube, without thaumasite sulfate attack.

Tests on Alkali-Activated Slag Foamed Concrete with Various Water-Binder Ratios and Substitution Levels of Fly Ash

To provide basic data for the reasonable mixing design of the alkali-activated (AA) foamed concrete as a thermal insulation material for a floor heating system, 9 concrete mixes with a targeted dry density less than 400 kg/m3 were tested. Ground granulated blast-furnace slag (GGBS) as a source material was activated by the following two types of alkali activators: 10% Ca(OH)2 and 4% Mg(NO3)2, and 2.5% Ca(OH)2 and 6.5% Na2SiO3. The main test parameters were water-to-binder (W/B) ratio and the substitution level (RFA) of fly ash (FA) for GGBS. Test results revealed that the dry density of AA GGBS foamed concrete was independent of the W/B ratio an RFA, whereas the compressive strength increased with the decrease in W/B ratio and with the increase in RFA up to 15%, beyond which it decreased. With the increase in the W/B ratio, the amount of macro capillaries and artificial air pores increased, which resulted in the decrease of compressive strength. The magnitude of the environmental loads of the AA GGBS foamed concrete is independent of the W/B ratio and RFA. The largest reduction percentage was found in the photochemical oxidation potential, being more than 99%. The reduction percentage was 87% - 93% for the global warming potential, 81% - 84% for abiotic depletion, 79% - 84% for acidification potential, 77% - 85% for eutrophication potential, and 73% - 83% for human toxicity potential. Ultimately, this study proved that the developed AA GGBS foamed concrete has a considerable promise as a sustainable construction material for nonstructural element.

Effects of Volume Ratios of Water Phase to Oily Phase on Morphology and Releasing Performance of Emulsion Electrospun Fibers

Emulsion electrospinning as a novel process in spinning core-sheath fibers shows a promising potential in drug release control. The volume ratio of water phase to oily phase is one of the critical parameters in forming core-sheath fibers. In this study, water phase was presented by hydrophilic tetracycline hydrochloride and oily phase by hydrophobic poly （E-caprolactone） （PCL）. The effects of volume ratios of water phase to oily phase on fiber morphology and in vitro drug release were investigated. Scanning electron microscopy （ SEM ）, transmission electron microscopy （ TEM）, and eonfoeal laser scanning microscopy（CLSM） were used to observe the morphology, core.sheath structure of the fibers and drug loading in the fibers, respectively. Samples of three different volume ratios of water phase to oily phase, 1： 25, 1：15, and 1：10, were prepared with the same concentration of drug solution. Experiment results showed that, with an increase in the volume ratios of water phase to oily phase, the fiber diameter increased and diameter distribution scattered. The drug entrapment efficiency of the fibers reduces with the increase in volume ratios, L e. , from 73.48 % in the ratio of 1 ： 25, 62.23 % in 1 ： 15, down to 45.63 % in 1：10. In vitro release tests showed that a higher volume ratio of water phase to oily phase would lead to a lower release rate resulted from thicker fiber sheath.

Effect of carbon and nitrogen ratio control on Artemia growth, water quality, biofloc microbial diversity under high salinity and zero-water exchange culture condition

Biofloc technology has been applied successfully in the intensive aquaculture of several fish and shrimp species. The growth of heterotrophic microorganisms can be stimulated through adding extra carbon, which reduces the nitrogen level in the water and provides microbial protein to the animals. However, most of the studies and practical applications have been conducted in freshwater and marine environment. This paper focused on brine shrimp Artemia that lives in high salinity environment together with other halophilic or halotolerant microorganisms. The effect of carbon supplementation on Artemia growth, water quality, and microbial diversity of biofl ocs was studied in the closed culture condition without any water exchange. The salinity of the culture medium was 100. A 24-d culture trial was conducted through supplementing sucrose at carbon/nitrogen (C/N) ratio of 5, 15, and 30 (Su5, Su15, and Su30), respectively. The culture without adding sucrose was used as a control. Artemia was fed formulated feed at a feeding ration of 60% recommended feeding level. The results showed that sucrose supplementation at higher C/N ratio (15 and 30) signifi cantly improved the Artemia survival, growth and water quality ( P <0.05). Addition of sucrose at C/N ratio of 15 and 30 significantly increased biofloc volume (BFV)( P <0.05). The Illumina MiSeq sequencing analysis showed that supplementing carbon at C/N ratio of 15 had a better total bacterial diversity and richness, and shaped the microbial composition at genera level. This study should provide information for studying the mechanism of biofloc technology and its application in high salinity culture conditions.

WATER EVAPORATION ENVIRONMENT IN TAIHU LAKE REGION

To the Taihu region water evaporation environmt of water surface with plants, intruded salt watersurface, shallow water surface in rice fields etc., polluted water surface and hot water surface havenow been added in recent years, as a result of economic development. This study on the regularitiesof evaporation from all the above water surfaces showed that evaporation will increase from some surfaces, but from the others.

Water Deficit Stress Effects on Corn (<i>Zea mays</i>, L.) Root:Shoot Ratio

A study was conducted at Akron, CO, USA, on a Weld silt loam in 2004 to quantify the effects of water deficit stress on corn (Zea mays, L.) root and shoot biomass. Corn plants were grown under a range of soil bulk density and water conditions caused by previous tillage, crop rotation, and irrigation management. Water deficit stress (Dstress) was quantified by the number of days when the water content in the surface 0.3 m deviated from the water content range determined by the Least Limiting Water Range (LLWR). Root and shoot samples were collected at the V6, V12, and R1 growth stages. There was no significant correlation between Dstress and shoot or root biomass at the V6 growth stage. At the V12 and R1 growth stages, there were negative, linear correlations among Dstress and both root biomass and shoot biomass. The proportional decrease of shoot biomass was greater than the proportional decrease in root biomass, leading to an increase in the root:shoot ratio as water deficit stress increased at all growth stages. Determining restrictive soil conditions using the LLWR may be useful for evaluating improvement or degradation of the soil physical environment caused by soil management.

The distribution of drinking water-to-cattle ratios in the summer across four feedlots in the Texas High Plains

In this short communication, we report the findings of a cross-sectional pilot study of the amount of water available per head of cattle (water-to-cattle ratio) and the associated feedlot and environmental factors across 26 pens in four Texas feedlots. The water-to-cattle ratio varied greatly among pens within and between feedlots. Mixed-effect linear regression modeling with feedlot as a random effect indicated that water in troughs with a higher water-to-cattle ratio was generally warmer when compared with water in troughs with a lower water-to-cattle ratio. This may have implications in the transmission and persistence of pathogens in feedlot cattle, such as Shiga toxin-producing Escherichia coli and Salmonella, because warmer water has been reported to favor the growth of these pathogens. Therefore, future field studies in feedlot cattle are warranted to assess whether the water-to-cattle ratio affects the prevalence of these pathogens in the water itself or in feces shed by the animals.

Experimental Study on the Effect of Sediment Composition Ratio on Shallow Water Delta

1 Introduction Shallow water delta in the middle-newborn Stratum Widely developed with huge oil and gas in China(Hu Shengwu et al.,2013).The control factors on the deltadevelopment like Climate,sea level,tectonic subsidence,sediment supply(flow,type),the geometric characteristics of the upstream river,the energy(wave,

Correlation between hydrocarbon distribution and water-hydrocarbon ratio in Fischer-Tropsch synthesis

In order to shorten the evaluation cycle of cobalt catalyst before the optimized catalyst is fixed on, a mathematical method is proposed to calculate weight percentage of C5＋ hydrocarbons. Based on the carbide polymerization mechanism and the main hydrocarbons being linear alkanes and α-olefins, the correlation between hydrocarbon distribution and the molecular mass ratio of water to hydrocarbons is discussed. The result shows the ratio was within the range of 1.125-1.286 and the lower the ratio, the more gaseous hydrocarbons were obtained. Moreover, a linear equation between the weight percentage of C5＋ hydrocarbons and the weight ratio of C5＋ hydrocarbons to the total water is established. These results are validated by corresponding experiments. The weight percentage of C5＋ hydrocarbons could be immediately calculated by this linear equation without detailed gas chromatography （GC） analysis of them.

The R&D of a Novel Sulfur Tolerant CO Shift Catalyst and Its Application in the Integrated Low Water Gas Ratio Process

The QDB-5 sulfur tolerant CO shift catalyst, with anti-methanation property by supported compositing alkali promoters, has been proved to effectively reduce the outlet methane content in the condition of a low water gas ratio. Thus, a new technology based on a lower water/gas ratio than before has been developed with the new catalyst. The CO conversion at lower temperatures and catalyst stability were confirmed by long term industrial application. The high temperature catalyst performance also showed a better result than the conventional commercial catalyst, with higher CO conversion and well controlled methane outlet. Our research and the industrial application of catalyst have shown the importance of alkali metals as core promoters for such kind of catalysts.

Hydrological Processes in a Small Research Watershed under Forest Coverage in the Coast of Chiapas, Mexico

In the hydrological watershed, some natural processes take place in which the interaction of water, soil, climate and vegetation favors the capture of water. The present study aimed to evaluate preliminary information regarding the hydrological response and the water balance in a small research watershed with tropical forest cover (15°01'44''N and 92°13'55''W, 471 m, 2.3 has). Events of precipitation, direct runoff, infiltration rate and baseflow were performed. The amount, duration and intensity of rainfall events were recorded with the use of a pluviograph. Surface runoff was quantified with an established gauging station, an H-type gauging device and a horizontal mechanical gauging limnograph. Runoff base flow was measured at the gauging station using the volume-time method. Infiltration was measured using a triple ring infiltrometer, taking two measurements in the upper part and two in the lower part of the microbasin. Evapotranspiration was measured with the amount of rainfall entering and runoff leaving the watershed. In the study period, annual rainfall of 4417.6 mm distributed over 181 events were recorded;about 70% of the storms showed lower intensities at 20 mm·h-1. The total runoff was 345.8 mm caused by half of the rainfall events, which represents 7.8% of the total rain;77% of runoff events showed lower sheets of 5 mm and an average specific rate of 20.7 L·s-1·ha-1 with a maximum of 113.6 L·s-1·ha-1. Three runoff events were greater than 20.1 mm and caused the 22.5% of the total runoff depth in the study period showing the equilibrium conditions in the hydrological response of the forest. Water outputs like baseflow was 669.5 mm. In this way, 90% of the rainfall is infiltrated every year in the micro-watershed, which shows the importance of the plant cover in the hydrological regulation and the groundwater recharge.

Cavitation Increases the Ratio of Ortho/Para-H2O Isomers in Water and Reduces Its Viscosity

For the first time, we found that cavitation treatment of water increases the number of ortho-H2O isomers by 12% - 15%, which was confirmed in experiments on a tomograph. From this, it was suggested that the O/P ratio is a key factor in reducing the viscosity of water. The most significant decrease in the viscosity of an aqueous suspension of hemoglobin molecules with an increase in its concentration was measured earlier in the vicinity of a temperature of 37°C. The mechanism of the observed phenomena is discussed.