To apply the measurements of model experiment in water tunnel to the actual sailing condition, it is necessary to know accurately the strut effect and its rule. In the present work, the corresponding interferences of ...To apply the measurements of model experiment in water tunnel to the actual sailing condition, it is necessary to know accurately the strut effect and its rule. In the present work, the corresponding interferences of one-side strut and two-side strut on the natural cavitating flows around a submerged vehicle in water tunnel were investigated numerically, using the homogeneous equilibrium two-phase model coupled with a natural cavitation model. The numerical simulation results show that the strut types have distinct effects on the hydrodynamic properties. For the same given upstream velocity and downstream pressure, the existence of the strut leads to an increment of natural cavitation number, reduces the low-pressure region and depresses the pressure on the vehicle surface near the sides of strut. In the case of given cavitaiton number, the influences of the two-side strut on the drag and lift coefficients are both enhanced along with the increment of attack angle, however the influence of the one-side strut gradually gets stronger on the drag coefficient but weaker on the lift coefficient contrarily. In addition, based on the present numerical results, a correction method by introducing the sigmoidal logistic function is proposed to eliminate the interference from the foil-shaped strut.展开更多
The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the r...The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 11002089,10832007)the Shanghai Leading Academic Discipline Project (Grant No.B206)
文摘To apply the measurements of model experiment in water tunnel to the actual sailing condition, it is necessary to know accurately the strut effect and its rule. In the present work, the corresponding interferences of one-side strut and two-side strut on the natural cavitating flows around a submerged vehicle in water tunnel were investigated numerically, using the homogeneous equilibrium two-phase model coupled with a natural cavitation model. The numerical simulation results show that the strut types have distinct effects on the hydrodynamic properties. For the same given upstream velocity and downstream pressure, the existence of the strut leads to an increment of natural cavitation number, reduces the low-pressure region and depresses the pressure on the vehicle surface near the sides of strut. In the case of given cavitaiton number, the influences of the two-side strut on the drag and lift coefficients are both enhanced along with the increment of attack angle, however the influence of the one-side strut gradually gets stronger on the drag coefficient but weaker on the lift coefficient contrarily. In addition, based on the present numerical results, a correction method by introducing the sigmoidal logistic function is proposed to eliminate the interference from the foil-shaped strut.
基金Foundation item： Supported by the National Natural Science Foundation of China （11172241）, and Northwestern Polytechnical University Foundation for Fundamental Research. （NPU-FFR- 1015）
文摘The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.
