Effect of Water Washing Pre-treatment on the Properties of Glass-ceramics from Incinerator Fly Ash Using Electronic Arc Furnace

Production of glass-ceramics by sintering the molten slag obtained from electric arc furnace treatment of fly ash was investigated. The effect of washing pretreatment prior to melting the fly ash on the microstructure and properties of the glass-ceramics was examined. The results show that washing pretreatment of fly ash can decrease alkali metal chloride and increase network former in fly ash, which results in the increase of peak crystallization temperature of parent glass and strengthening of properties of bending strength and chemical stability of the glass-ceramics. The optimal heat treatment temperature for parent glass of washed fly ash is 1 173 K, at which the crystalline phase of glass-ceramics is composed of gelignite （Ca2A12SiO7） and akermanite （Ca2MgSi207）. Glass-ceramics produced at optimal heat treatment temperature are excellent in term of the physical and chemical properties and leaching characteristics, indicating attractive potential as substitute of nature materials.

Emission Behaviors of Submicron Particles(PM_(1))Generated by the Combustion of Sesame Stalk after Combined Water Washing and Carbonization Pretreatment

Pretreatment before biomass combustion is significant for its efficient utilization and that combined water washing and carbonization can be efficient.An agricultural processing residues sesame stalk was selected and carried out two pretreatments separately,i.e.,water washing-torrefaction(W-T)and torrefaction-water washing(T-W),to explore the effect on the fuel properties,combustion characteristics and particulate matter(PM)emission.The obtained biochar was also combusted under air and oxy50(CO_(2):O_(2)=50:50)conditions for the sake of investigating the effect of pretreatment and combustion atmosphere.The results indicate that,W-T and T-W both not only have great effect on the improvement of fuel properties but also reduce the content of water-soluble elements like K,Cl,etc.Due to the difference in hydrophobicity,the biochar obtained by W-T have the optimal fuel properties.At the same time,the pretreatment also hinder the combustion in a certain extent in which the comprehensive combustion characteristics(SN)show a downward trend.Furthermore,both two pretreatments have obvious benefit on the reduction of PM_(1)emission and W-T have the best effect related to the higher removal efficiency of inorganic elements(especially K+Na+Cl+S).Under oxy50 condition,the oxygen concentration and combustion temperature is higher,improving the sulfation of K and vaporization of Ca,P and Mg which result in weakening in the pretreatment reduction effect on PM_(1)emission.

Effect of semi-continuous water washing on the combustion behaviors of agricultural organic solid waste

Combustion of agricultural organic solid waste(AOSW)was an ideal solution for their resource utilization in view of their massive annual production and great potential for reduction of fossil fuel utilization.However,high alkali and alkaline earth metals(AAEMs)content in the feedstock can arose severe fouling and slagging issues and thus prohibiting its vast utilization.In this study,a semi-continuous water washing method was proposed to preliminarily remove AAEMs from agricultural organic solid waste and its effects on the combustion behaviors of washed solid product were investigated.Results showed that the combustion index S were improved to 2.63×10-6,over 68%of the total ashes were removed from the cotton stalk,and 96.3%,89.0%and 74.7%of K,Na and Mg were effectively removed,respectively.Moreover,the softening temperature of low temperature ash from the washed sample was as high as 1450◦C,538◦C higher than the low temperature ash from the original sample;the base acid ratio and fouling index were improved from high slagging and fouling risk(1.7 and 90.8)of the original organic solid waste to low and medium risk(0.4 and 3.5),respectively.All these results signified the contributing effect of proposed semi-continuous water washing method on the combustion of agricultural organic solid waste.In a word,this study provided a promising method for fouling and slagging inhibition during the agricultural organic solid waste combustion.

Treatment of tunnel wash waters-experiments with organic sorbent materials.PartⅠ:Removal of polycyclic aromatic hydrocarbons and nonpolar oil

Tunnel wash waters characterize all waters that run off after washing procedures of tunnels are performed.These waters represent a wide spectrum of organic and inorganic pollutants,such as polycyclic aromatic hydrocarbons(PAHs)and toxic metals.Removal of such contaminants from water runoff was investigated using laboratory tests after washing procedure was performed on two road tunnels in eastern Norway(Hanekleiv and Bragernes).Due to diverse character of both,treatment media and treated wash waters, the wh...

Treatment of tunnel wash waters-experiments with organic sorbent materials. PartⅡ: Removal of toxic metals

In the first part of the article, the column and the bag experiments concerning removal of polycyclic aromatic hydrocarbons (PAHs) and nonpolar oil (NPO) from tunnel wash waters using organic sorbent materials have been described. This part presents the results of removal of toxic metals. The metals of concern (Al, As, Cd, Cr, Cu, Fe, Pb, Mo, Ni, and Zn) were selected based on the priority toxicant pollutants defined in surface water quality criteria. Concentrations of these metals in the collected effluent...

Re-Examination of the Oil and Gas Origins in the Kekeya Gas Condensate Field,Northwest China——A Case Study of Hydrocarbon-Source Correlation Using Sophisticated Geochemical Methods

This work discussed the origins, alteration and accumulation processes of the oil and gas in the Kekeya gas condensate field based on molecular compositions, stable carbon isotopes, light hydrocarbons, diamondoid hydrocarbons and biomarker fingerprints. A comparison study is also made between the geochemical characteristics of the Kekeya hydrocarbons and typical marine and terrigenous hydrocarbons of the Tarim Basin. Natural gas from the Kekeya gas condensate field is derived from Middle–Lower Jurassic coal measures while the condensates are derived from Carboniferous–Permian marine source rocks with a higher maturity. In the study area, both natural gas and condensates have experienced severe water washing. A large amount of methane was dissolved into the water, resulting in a decrease in the dryness coefficient. Water washing also makes the carbon isotopic compositions of the natural gas more negative and partially reverse. Considering that the gas maturities are higher than once expected, gas generation intensity in the study area should be much stronger and the gas related to the Jurassic coal measures could promise a greater prospecting potential. As a result of evaporative fractionation, the Kekeya condensates are enriched in saturates and lack aromatics. Evaporative fractionation disguises the original terrigenous characteristics of the light hydrocarbons associated with the natural gas, making it appear marinesourced. Thus, alteration processes should be fully taken into consideration when gas–source correlations are carried out based on light hydrocarbons. With the condensates discovered in the study area all being ＂migration phase＂, the pre-salt Cretaceous and Jurassic reservoirs may promise great exploration potential for the ＂residual phase＂ hydrocarbons. This research not only is of significance for oil and gas exploration in the southwest Tarim Basin, but also sheds light on the oil/gas-source correlations in general.

Analysis,Prediction and Process Optimization Concerning Ammonium Chloride Corrosion in Ebullated-Bed Hydrogenation Unit for Treating Residual Oil

Ammonium chloride corrosion in the reactor effluent system remains to be a barrier for the safe operation of the ebullated-bed hydrogenation unit as impurity content is higher compared with that of the ordinary hydrogenation units.In this research,a Sinopec envisaged case study was conducted on feed oil containing 2.92μg/g of Cl and 0.38%of N,because the impurity content of feed oil was representative in residue oil.The deposition patterns in heat exchangers were investigated by changing process variables,and then water wash strategy was optimized in view of the relative humidity to obtain a minimum water flowrate,and finally the process optimization suggestions concerning the operation of heat exchangers were proposed.Results show that with the measured content of nitrogen and chlorine in the feed,the NH4Cl deposition temperature of hot high-pressure vapor and hot low-pressure vapor was 223.4℃ and 173.7℃,respectively,and the minimum water wash flowrate for heat exchangers of hot high-pressure vapor with mixed hydrogen and hot low-pressure vapor with cold low-pressure oil was 38.0 t/h and 5.4 t/h,respectively.Water wash should be carried out intermittently upstream of the heat exchanger tube passes.In consideration of energy consumption,it is recommended to reduce the tube pass outlet temperature of the above heat exchangers to 240℃ and 190℃,respectively.

Preparation and characterization of asymmetric ultrafiltration membrane for effective recovery of proteases from surimi wash water

The wash water generated from the surimi processing industry contains a large amount of proteases which are widely used in the food and biotechnology industries. Asymmetric polysulfone and polyethersulfone ultrafiltration （PSf-UF and PES-UF） membranes with three different polymer concentrations were screened for their abilities to recover proteases from surimi wash water. In- house fabricated membranes were prepared via a simple dry/wet phase inversion technique and were characterized in terms of permeability coefficient, membrane morphol- ogy and molecular weight cut-off （MWCO）. The ability of the UF membranes to remove commercial proteases was tested at various pressures （up to 10 bars）. The membrane with the best performance, 15 wt-% PSf-UF, was further tested with actual surimi wash water. The effect of the pH of the feed solution （4 to 8） in the pre-treatment stage was also evaluated to recover the highest amount of proteases. The highest retention of protease was 96% with a flux of 25.6 L/（mZ.h） which was achieved with the 15 wt-% PSf- UF membrane.

A low-carbon strategy for revival of degraded single crystal LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)

Single crystal LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)is currently widely used due to the outstanding cycle stability and safety.However,its sensitivity to the environment and the high residual alkali makes the electrochemical performance and processing property severely degraded after long-term storage,especially for the Ni-rich single crystal material.Therefore,it is highly urgent to develop a cost-effective strategy for the revival of degraded Ni-rich cathode materials.Here,a low-carbon strategy is proposed to revive the degraded single crystal LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(SCNCM622)through water washing.The solid-liquid reaction mechanism of SCNCM622 and water was revealed and the strong dependence of the recovery effect on the washing time was clarified.Under optimized conditions,the sample with a washing time of 24 h shows 31.2%reduction in viscosity,18.4%improvement in discharge capacity,15.3%enhancement in cycle life,and excellent rate performance compared to the blank sample.Therefore,this strategy can achieve higher utilization of single crystal Ni-based cathode materials with a lower cost.

SO_2 poisoning and regeneration of Mn-Ce/TiO_2 catalyst for low temperature NO_x reduction with NH_3

SO2 poisoning and regeneration of Mn-Ce/TiO2 catalyst prepared by a novel co-precipitation method for low temperature selective catalytic reduction （SCR） of NOx with ammonia were investigated in this study. When 700 ppm SO2 was fed in, the Mn-Ce/TiO2 catalyst had good resistance to SO2, but the deactivation of Mn-Ce/TiO2 poisoned by SO2 still occurred. The NO conversion of Mn-Ce/TiO2 （the molar ra-tio of Ce to Ti is 0.075） catalyst decreased from 92.5% to 34.6% in 13 h. Characterizations of fresh and SO2-poisoned Mn-Ce/TiO2 catalysts were carried out by Brunauer-Emmett-Teller method （BET）, ion chromatography （IC）, X-ray photoelectron spectroscopy （XPS）, and X-ray diffraction （XRD）. The characterized results indicated that the deposition of sulfates and nitrates on the surface made the catalyst deactivated. Water washing, thermal regeneration and reductive regeneration were used to regenerate the deactivated Mn-Ce/TiO2. And water washing showed best performance on the regeneration of poisoned catalysts, especially with ultrasonic vibration. The Mn-Ce/TiO2 catalyst showed high stability under a series of deactivation-regeneration experiments for ten cycles.

N,O-Bis(trimethylsilyl)acetamide/N-hydroxysuccinimide ester(BSA/NHS) as coupling agents for dipeptide synthesis

A method using N,O-bis（trimethylsilyl）acetamide/N-hydroxysuccinimide ester（BSA/NHS） as coupling agents for dipeptide synthesis is descried. The coupling reaction between N-hydroxysuccinimide（NHS）esters and amines could be performed under mild conditions with N,O-bis（trimethylsilyl）acetamide（BSA） as coupling reagent and no additional acid/base is required. All byproducts and excessive reactants are water soluble or hydrolysable and easy to eliminate through water-washing at the purification stage.Moreover, all the reactants are inexpensive and widely used in conventional drug production.