期刊文献+
共找到632篇文章
< 1 2 32 >
每页显示 20 50 100
Clinical Significance of Fetal Cerebral and Umbilical Arte-rial Blood Flow Velocity Wave Forms Examination. 被引量:3
1
作者 Yang Yuying et al. The Affiliated Hospital, Shandong Med Uni, Jinan 250012, 《Chinese Medical Journal》 SCIE CAS CSCD 1995年第7期56-56,共1页
Color Doppler was used to examine the blood flow velocity wave forms of fetal middle cerebral artery (MCA) and umbilical artery (UA) in normal pregnancy (58 cases) pregnancy induced hypertension (PIH) with fetal growt... Color Doppler was used to examine the blood flow velocity wave forms of fetal middle cerebral artery (MCA) and umbilical artery (UA) in normal pregnancy (58 cases) pregnancy induced hypertension (PIH) with fetal growth retardation (IUGR) (54 cases) and without IUGR (34 cases). The peak-systolic / diastole ratio (S/D), pulse index (PI) and resistance index (RI) values of MCA and UA were calcu- 展开更多
关键词 MCA Flow IUGR Clinical Significance of Fetal Cerebral and Umbilical Arte-rial Blood Flow Velocity wave forms Examination wave
原文传递
Improved form of wind wave frequency spectrum 被引量:10
2
作者 Wen Shengchang (S. C. Wen ), Zhang Dacuo, Guo Peifang, Wang Wei, Chen Bohai and Tai Weitao Institute of Physical Oceanography, Ocean University of Qingdao, China 《Acta Oceanologica Sinica》 SCIE CAS CSCD 1989年第4期467-483,共17页
The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data coll... The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data collected in the Bohai Sea region and used in the previous papers, those obtained in the Huanghai Sea, the East China Sea and the South China Sea have been employed so that the improved spectra can be verified on a more extensive observational basis. Computed results agree with the observations well. Further comparisons have been made between the proposed spectra and the JONSWAP spectrum. Though the two types of spectrum are close to each other in form, the former shows, as a whole, better agreement with the observation than the latter. By introducing an improved relation between the peak-ness factor and significant wave steepness, the spectrum contains only significant wave height and period as parameters. For spectra given in this form, the computed peak frequencies coincide approximately with observed values and the computed peak magnitudes of spectra agree basically with observations, but, because of the statistic variability inherent in the measurements of significant wave heights and periods, there are certain discrepancies between computed and measured spectrum peak magnitudes. 展开更多
关键词 wave Improved form of wind wave frequency spectrum
下载PDF
A Study on Super Speed Forming of Metal Sheet by Laser Shock Waves 被引量:4
3
作者 ZHOU Jian-zhong 1, YANG Ji-chang 1, ZHANG Yong-kang 1, ZHOU Ming 2 (1. School of Mechanical Engineering, Jiangsu University, Zhenjiang, 21 2013 China 2. School of Material Science and Engineering, Jiangsu University, Zhenjiang 21 2000, China) 《厦门大学学报(自然科学版)》 CAS CSCD 北大核心 2002年第S1期127-128,共2页
Metal sheet plastic deformation or forming is gener at ed through a mechanical pressure or a thermal variation. These pressure variatio ns or thermal variations can be created by a variety of means such as press form ... Metal sheet plastic deformation or forming is gener at ed through a mechanical pressure or a thermal variation. These pressure variatio ns or thermal variations can be created by a variety of means such as press form ing, hydroforming, imploding detonation and so on. According to the magnitude of the strain rates all these forming methods can be divided into quasi-static fo rming and dynamical forming. Up to now there are no reports of forming methods w ith the strain rates above 10 5sec -1, even though the exploding forming. In this article, we work on a dynamic super-speed forming method driven by lase r shock waves and advanced a novel concept of laser shock forming. The initial o bservation of the laser shock forming is done through a bugle testing with speci mens of SUS430 sheet metal, using a neodymium-glass laser of pulse energy 10J~ 3 0J and duration of 20 ns (FWHM). The investigation revealed that the plastic de formation during the laser shock forming is characterized as ultrahigh strain ra te up to 10 7sec -1. We indicate that plastic deformation increases nonlin early when the energy density of the laser varies. By investigating the hardness and residual stress of the surfaces, we conclude that laser shock forming is a combination technique of laser shock strengthening and metal forming for introdu cing a strain harden and a compressive residual stress on the surface of the wor k-piece, and the treated surface by laser shock forming has good properties in fatigue and corrosion resistance. This technique can achieve forming wit h or without mould. 展开更多
关键词 laser shock wave metal sheet forming ultrahigh strain rate residual stresses
下载PDF
A Study on the Spectral Form of Nearshore Water Waves 被引量:1
4
作者 Kuo Yiyu Chien Chungching Professor, Department of Civil Engineering, National Chiao-Tung University, Wuchi, Taichung District,taiwan Graduate Student for Ph. D., Department of Civil Engineering, National Chiao-Tung University, Wuchi, Taichung District, Taiwan 《China Ocean Engineering》 SCIE EI 1993年第3期289-304,共16页
The spectral form of wind waves is investigated based on the ocean wave data observed at three nearshore stations of Taiwan. In this study, the generalized forms of Pierson-Moskowitz spectrum and JONSWAP spectrum are ... The spectral form of wind waves is investigated based on the ocean wave data observed at three nearshore stations of Taiwan. In this study, the generalized forms of Pierson-Moskowitz spectrum and JONSWAP spectrum are used to describe the local wave spectrum by selecting suitable spectral form parameters. It is shown that, at a specific site, the similarity of wave spectral form exists. Thus it is possible to use a representative spectral form for a given nearshore region to describe the wave spectrum at this nearshore. On the other hand, the effects of relative water depth on spectral form are examined. The feasibility of two spectral models in finite water depth is evaluated by using the same field wave data. 展开更多
关键词 field wind wave wave spectrrum spectral form spectrum model finite wate depth
下载PDF
Forming of Space Charge Wave with Broad Frequency Spectrum in Helical Relativistic Two-Stream Electron Beams 被引量:1
5
作者 A.Lysenko I.Volk +1 位作者 A.Serozhko O.Rybalko 《Chinese Physics Letters》 SCIE CAS CSCD 2017年第7期150-154,共5页
We elaborate a quadratic nonlinear theory of plural interactions of growing space charge wave (SCW) harmonics during the development of the two-stream instability in helical relativistic electron beams. It is found ... We elaborate a quadratic nonlinear theory of plural interactions of growing space charge wave (SCW) harmonics during the development of the two-stream instability in helical relativistic electron beams. It is found that in helical two-stream electron beams the growth rate of the two-stream instability increases with the beam entrance angle. An SCW with the broad frequency spectrum, in which higher harmonics have higher amplitudes, forms when the frequency of the first SCW harmonic is much less than the critical frequency of the two-stream instability. For helical electron beams the spectrum expands with the increase of the beam entrance angle. Moreover, we obtain that utilizing helical electron beams in multiharmonic two-stream superheterodyne free-electron lasers leads to the improvement of their amplification characteristics, the frequency spectrum broadening in multiharmonic signal generation mode, and the reduction of the overall system dimensions. 展开更多
关键词 SCW forming of Space Charge wave with Broad Frequency Spectrum in Helical Relativistic Two-Stream Electron Beams
下载PDF
Photons in the Non-uniform Optical Waveguide Propagate along z-axis in Spiral Form
6
作者 ZHANG Jinwei(Jinan University, Guangzhou 510632, CHN) 《Semiconductor Photonics and Technology》 CAS 1996年第3期184-188,共5页
PhotonsintheNon-uniformOpticalWaveguidePropagatealongz-axisinSpiralForm¥ZHANGJinwei(JinanUniversity,Guangzho... PhotonsintheNon-uniformOpticalWaveguidePropagatealongz-axisinSpiralForm¥ZHANGJinwei(JinanUniversity,Guangzhou510632,CHN)Abstr... 展开更多
关键词 光子 光波导 波动函数 螺线形
下载PDF
New Rational Form Solutions to Coupled Nonlinear Wave Equations
7
作者 FU Zun-Tao LIN Guang-Xing +1 位作者 LIU Shi-Kuo LIU Shi-Da 《Communications in Theoretical Physics》 SCIE CAS CSCD 2005年第2X期235-242,共8页
The new rational form solutions to the elliptic equation are shown, and then these solutions to the elliptic equation are taken as a transformation and applied to solve nonlinear coupled wave equations. It is shown th... The new rational form solutions to the elliptic equation are shown, and then these solutions to the elliptic equation are taken as a transformation and applied to solve nonlinear coupled wave equations. It is shown that more novel kinds of solutions are derived, such as periodic solutions of rational form, solitary wave solutions of rational form,and so on. 展开更多
关键词 椭圆方程 JACOBI椭圆函数 非线性方程 周期波 有理数
下载PDF
New Families of Rational Form Solitary Wave Solutions to (2+1)-Dimensional Broer-Kaup-Kupershmidt System*
8
作者 WANGQi CHENYong +1 位作者 LIBiao ZHANGHong-Qing 《Communications in Theoretical Physics》 SCIE CAS CSCD 2005年第5期769-774,共6页
Taking the (2+1)-dimensional Broer-Kaup-Kupershmidt system as a simple example, some families of rational form solitary wave solutions, triangular periodic wave solutions, and rational wave solutions are constructed b... Taking the (2+1)-dimensional Broer-Kaup-Kupershmidt system as a simple example, some families of rational form solitary wave solutions, triangular periodic wave solutions, and rational wave solutions are constructed by using the Riccati equation rational expansion method presented by us. The method can also be applied to solve more nonlinear partial differential equation or equations. 展开更多
关键词 里卡蒂函数有理数展开式法 BKK系统 符号运算 孤立波解
下载PDF
铜/钢爆炸焊接复合界面的显微组织及晶粒结构演化机理
9
作者 杨明 张冰原 +2 位作者 马宏昊 王金相 熊家艺 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第5期1588-1605,共18页
采用光滑粒子仿真、先进表征和理论分析相结合的方法,对铜/钢复合材料爆炸焊接过程中的界面瞬态行为进行深入研究,并详细阐述其显微组织演化机制。根据仿真数据重构波形完整的演化过程,并揭示各种界面特征的形成机制。多尺度EBSD分析表... 采用光滑粒子仿真、先进表征和理论分析相结合的方法,对铜/钢复合材料爆炸焊接过程中的界面瞬态行为进行深入研究,并详细阐述其显微组织演化机制。根据仿真数据重构波形完整的演化过程,并揭示各种界面特征的形成机制。多尺度EBSD分析表明,界面附近区域呈多样性的晶粒结构,其演化机制主要受塑性流动、动态再结晶和凝固形核三个过程的控制。最后,通过纳米压痕实验建立晶粒结构与力学性能之间的关系。 展开更多
关键词 爆炸焊接 铜/钢复合材料 成波机理 晶粒结构 纳米压痕
下载PDF
内孤立波作用下缓波形立管动力特性研究
10
作者 余杨 刘晓伟 +3 位作者 李振眠 孙若飞 杨政龙 徐立新 《船舶力学》 EI CSCD 北大核心 2024年第6期803-817,共15页
我国南海活跃着大量内孤立波,严重威胁海洋工程作业的安全。本文采用向量式有限元方法分析内孤立波作用下深海缓波形钢悬链立管动力特性,建立考虑触地段土反力和内孤立波载荷的缓波形钢悬链立管动力模型,根据mKdV方程求解内孤立波载荷,... 我国南海活跃着大量内孤立波,严重威胁海洋工程作业的安全。本文采用向量式有限元方法分析内孤立波作用下深海缓波形钢悬链立管动力特性,建立考虑触地段土反力和内孤立波载荷的缓波形钢悬链立管动力模型,根据mKdV方程求解内孤立波载荷,基于向量式有限元梁单元编制Fortran计算程序。分析不同入射角内孤立波作用下立管的位移极值、张力及弯矩变化趋势,并比较缓波形立管与简单钢悬链立管在内孤立波作用下的动力特性。结果表明:内孤立波作用下,缓波形钢悬链立管会有较大的位移响应,特别是顶部悬垂段会有较大的水平位移;缓波形立管比简单钢悬链立管有更显著的张力变化幅值,有更加复杂的弯矩变化趋势。 展开更多
关键词 缓波形钢悬链立管 内孤立波 向量式有限元 KdV理论 动力响应
下载PDF
基于MIMO阵列的一体化射频技术研究进展及展望
11
作者 唐波 吴文俊 《信息对抗技术》 2024年第1期3-17,共15页
基于多输入多输出(multiple-input-multiple-output,MIMO)阵列的一体化射频系统通过充分利用空间自由度和波形自由度,不仅能够同时实现雷达探测、数据通信、电子干扰等多种功能,而且具有目标探测可靠性好、参数估计精确度高、反侦察识... 基于多输入多输出(multiple-input-multiple-output,MIMO)阵列的一体化射频系统通过充分利用空间自由度和波形自由度,不仅能够同时实现雷达探测、数据通信、电子干扰等多种功能,而且具有目标探测可靠性好、参数估计精确度高、反侦察识别能力强等突出特点,在高动态强对抗环境中展现了巨大的潜力。从基于MIMO阵列的一体化射频系统的检测性能分析入手,剖析了一体化射频系统的检测性能极限以及影响检测性能的主要因素;针对MIMO阵列参数高精度估计问题,提出通过单个发射脉冲完成参数估计以及一种增强参数估计精度的波形优化算法;考虑到目标角度估计误差不可避免,提出了一种稳健的一体化波形设计算法;针对杂波环境中一体化射频系统性能下降的问题,提出了发射波形和接收滤波器联合优化算法,该算法不仅能够实现同时多功能,而且有效地抑制了杂波,提高了目标检测性能。最后,展望了一体化射频系统参数估计精度极限、高精度参数估计、稳健波形设计、波形设计算法快速实现等有待突破的信号处理关键技术。 展开更多
关键词 一体化射频系统 多输入多输出阵列 目标探测 角度估计 稳健波形设计 杂波环境
下载PDF
Rational Form Solitary Wave Solutions and Doubly Periodic Wave Solutions to (1+1)-Dimensional Dispersive Long Wave Equation 被引量:1
12
作者 WANGQi CHENYong ZHANGHong-Qing 《Communications in Theoretical Physics》 SCIE CAS CSCD 2005年第6期975-982,共8页
In this work we devise an algebraic method to uniformly construct rational form solitary wave solutions and Jacobi and Weierstrass doubly periodic wave solutions of physical interest for nonlinear evolution equations.... In this work we devise an algebraic method to uniformly construct rational form solitary wave solutions and Jacobi and Weierstrass doubly periodic wave solutions of physical interest for nonlinear evolution equations. With the aid of symbolic computation, we apply the proposed method to solving the (1+1)-dimensional dispersive long wave equation and explicitly construct a series of exact solutions which include the rational form solitary wave solutions and elliptic doubly periodic wave solutions as special cases. 展开更多
关键词 孤波解 双周期波解 长波扩散函数 椭圆型偏微分方程 有理数展开法
下载PDF
定形态隧道压力波激扰下车内压力迭代学习控制
13
作者 陈春俊 曹宇啸 +1 位作者 何智颖 杨露 《西南交通大学学报》 EI CSCD 北大核心 2024年第1期20-28,共9页
同一列车重复通过同一隧道时所产生隧道压力波激扰具有形态相似、变尺度变幅值的特性.针对现有控制策略未考虑这一定形态特性的问题,提出一种基于高阶反馈遗忘迭代学习的控制方法.首先,建立高速列车车内外气压传递数学模型,并利用实测... 同一列车重复通过同一隧道时所产生隧道压力波激扰具有形态相似、变尺度变幅值的特性.针对现有控制策略未考虑这一定形态特性的问题,提出一种基于高阶反馈遗忘迭代学习的控制方法.首先,建立高速列车车内外气压传递数学模型,并利用实测车内外压力数据进行修正与验证;其次,通过控制列车通风设备的阀门来减缓车内压力变化,提出阶反馈遗忘迭代学习控制算法,并设计变幅值和变尺度处理方法;最后,利用实测压力波生成一组定形态的随机压力波,并进行仿真分析.仿真结果表明:在重复定形态的隧道压力波激扰下,高阶反馈遗忘迭代学习控制算法能够使车内压力在第8个迭代周期后1 s变化率基本收敛到200 Pa/s以下,而且均方根误差也在第4个迭代周期后降低到15.0000%以下. 展开更多
关键词 高速列车 隧道压力波 迭代学习控制 重复定形态
下载PDF
含改进LuGre摩擦的冲击振动成型机动力学分析
14
作者 范旭东 张艳龙 张睿 《噪声与振动控制》 CSCD 北大核心 2024年第4期83-89,共7页
针对一种具有物料检测装置的全自动散热片成型机,简化得到一类含间隙及摩擦的两自由度冲击振动成型机的力学模型,根据拉格朗日方程建立系统的运动方程,并得到系统运动的详细过程及每个阶段的判断条件。利用数值仿真分析改进LuGre动摩擦... 针对一种具有物料检测装置的全自动散热片成型机,简化得到一类含间隙及摩擦的两自由度冲击振动成型机的力学模型,根据拉格朗日方程建立系统的运动方程,并得到系统运动的详细过程及每个阶段的判断条件。利用数值仿真分析改进LuGre动摩擦作用下系统运动的转迁过程以及黏滞和颤振现象。结果表明:系统运动主要经周期倍化分岔、周期逆倍化分岔、擦边分岔以及Hopf分岔在单周期运动与多周期运动以及周期运动与混沌之间相互转迁。此外,当系统激振频率在1~1.0819之间时,系统运动存在黏滞和颤振现象;当系统激振频率在1.0819~3之间时,系统运动只存在颤振现象,黏滞现象消失。 展开更多
关键词 振动与波 成型机 动摩擦 分岔 黏滞 动力学特性
下载PDF
斜坡式重力储能系统的并网控制研究
15
作者 杨川 郝正航 陈巨龙 《中外能源》 CAS 2024年第6期26-32,共7页
重力储能是利用高度差以重力势能进行能量存储的系统,具有成本低、储能容量大、使用寿命长、对环境无污染、安全可靠等优点。斜坡式重力储能尤其适合在多山地且温差较大的地区进行规模化建设,拥有较高的转化效率。重力储能的存储介质是... 重力储能是利用高度差以重力势能进行能量存储的系统,具有成本低、储能容量大、使用寿命长、对环境无污染、安全可靠等优点。斜坡式重力储能尤其适合在多山地且温差较大的地区进行规模化建设,拥有较高的转化效率。重力储能的存储介质是离散的重物块,会引起电机重复启动和停止,为了平滑斜坡式重力储能系统运行中重物块的间断切换所造成的并网功率波动,有必要研究重力储能系统经变流器并网的控制策略。根据斜坡式重力储能系统的工作原理和能量转换过程,构建相应的数学模型。考虑到斜坡式重力储能在风能和太阳能发电并入电网中的有功功率控制需求,采用通过背靠背双PWM变流器实现并网的方案。该方案中,机侧和网侧变流器分别采用基于定子电流d轴分量id=0、电压定向控制的双闭环控制策略,以达到控制重力储能系统在发电工况和电动工况过程中的并网功率,从而实现新能源发电并网后电力系统的稳定运行。利用Matlab/Simulink软件构建重力储能系统的并网仿真模型,通过分析仿真结果中的输出功率和电网侧电压、电流的波形,验证了所提出并网方案的有效性。 展开更多
关键词 斜坡式重力储能 并网功率 变流器 并网控制策略 发电工况 波形
下载PDF
基于数值模拟的不同形态内孤立波特征研究
16
作者 赵丽娜 《计算机应用文摘》 2024年第16期184-186,189,共4页
作为南海中频发的重要动力过程,内孤立波对水体及物质的输运具有显著影响,对南海生态环境具有重要意义。在传播过程中,内孤立波会经历形态变化,从而引起不同的生态学效应。文章基于MITgcm数值模式模拟了南海北部内孤立波的传播过程,并... 作为南海中频发的重要动力过程,内孤立波对水体及物质的输运具有显著影响,对南海生态环境具有重要意义。在传播过程中,内孤立波会经历形态变化,从而引起不同的生态学效应。文章基于MITgcm数值模式模拟了南海北部内孤立波的传播过程,并获取了为期20天的模式数据。分析结果表明,自吕宋海峡产生的内孤立波在传播过程中逐渐由下凹型转变为上凸型。具体而言,下凹型内孤立波的上层流速向西北方向流动,下层流速向东南方向流动,而上凸型内孤立波的流速方向则完全相反。在传播路径上,形成了第二模态内孤立波,其上层等温线向上凸起,下层等温线向下凹陷,同时垂向上流速呈现上下层流速方向相反的情况。 展开更多
关键词 内孤立波 MITgcm模式 输运 不同形态
下载PDF
完全匹配层在矩阵式波动方程SBP-SAT方法应用
17
作者 孙铖 杨在林 +1 位作者 蒋关希曦 刘泰玉 《振动与冲击》 EI CSCD 北大核心 2024年第13期53-60,共8页
数值离散方法和截断边界效果是地震动模拟实现的关键。基于分部求和(summation-by-parts,SBP)和一致逼近(simultaneous approximation term,SAT)的SBP-SAT方法具有较高的稳定性,这使得该方法具备了较高的应用前景和价值。此外,完全匹配... 数值离散方法和截断边界效果是地震动模拟实现的关键。基于分部求和(summation-by-parts,SBP)和一致逼近(simultaneous approximation term,SAT)的SBP-SAT方法具有较高的稳定性,这使得该方法具备了较高的应用前景和价值。此外,完全匹配层(perfect matching layer,PML)是一种应用广泛用于模拟截断边界的技术,但引入匹配层可能会破坏原始方程的稳定性,特别是在各向异性介质或曲线域模型中。首先基于数理推导,给出弹性波动方程系数矩阵的对称形式。在此基础上,引入多轴完全匹配层(multi-axis perfect matching layer,MPML),并建立相应的匹配层方程。通过本征值分析,我们可以判断阻尼函数对原方程特征根实部的走向和取值范围的影响。然后,我们采用SBP-SAT方法对矩阵对称形式匹配层方程进行离散,并在频域中采用能量法进行稳定性评估。通过对不同模型的数值仿真,表明所提出的离散框架具有整合度高、稳定性好和拓展性强等特点。此外,多轴匹配层可以与SBP-SAT方法结合,可以稳定地模拟曲线域中的波传播。 展开更多
关键词 弹性波动方程 对称矩阵形式 高阶有限差分方法 分部求和-一致逼近(SBP-SAT) 多轴完全匹配层(MPML) 稳定性
下载PDF
基于多波位波束搜索的大型相控阵阵列信号处理技术
18
作者 李思佳 刘胜利 +3 位作者 张金荣 张磊 朱颖 郑建君 《遥测遥控》 2024年第1期18-23,共6页
数字波束合成技术是通信对抗领域里一项至关重要的技术,通过在数字域对信号幅度和相位进行控制,可以形成多个独立可控的波束,形成波束指向精度高、灵活可变,且理论上不受波束形成数量的限制。本文针对大型相控阵需求,利用波束合成原理,... 数字波束合成技术是通信对抗领域里一项至关重要的技术,通过在数字域对信号幅度和相位进行控制,可以形成多个独立可控的波束,形成波束指向精度高、灵活可变,且理论上不受波束形成数量的限制。本文针对大型相控阵需求,利用波束合成原理,并结合大规模阵列信号同步技术与相控阵幅相校准技术,实现一种可同时产生180个偏馈波束的多波位波束搜索系统。该系统可以利用波束群的实时扫描功能,实现大范围的波束搜索,更快定位目标角度。该系统已在工程上进行应用,并成功执行大型测控任务,取得圆满成功。 展开更多
关键词 数字波束合成 相控阵 阵列信号处理 多波位
下载PDF
Diffraction of anti-plane SH waves by a semi-circular cylindrical hill with an inside concentric semi-circular tunnel 被引量:15
19
作者 Vincent W.Lee 罗昊 梁建文 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2004年第2期249-262,共14页
A closed-form analytic solution of two-dimensional scattering and diffraction of plane SH waves by a semi- cylindrical hill with a semi-cylindrical concentric tunnel inside an elastic half-space is presented using the... A closed-form analytic solution of two-dimensional scattering and diffraction of plane SH waves by a semi- cylindrical hill with a semi-cylindrical concentric tunnel inside an elastic half-space is presented using the cylindrical wave functions expansion method.The solution is reduced to solving a set of infinite linear algebraic equations.Fourier expansion theorem with the form of complex exponential function and cosine function is used.Numerical solutions are obtained by truncation of the infinite equations.The accuracy of the presented numerical results is carefully verified. 展开更多
关键词 SH waves HILL tunnels close-form analytic solution amplifications
下载PDF
Risk Analysis of Breakwater Caisson Under Wave Attack Using Load Surface Approximation 被引量:1
20
作者 Dong Hyawn KIM 《China Ocean Engineering》 SCIE EI CSCD 2014年第6期739-748,共10页
A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called ... A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method(FORM) can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking. 展开更多
关键词 failure probability load surface reliability caisson breakwater wave breaking form
下载PDF
上一页 1 2 32 下一页 到第
使用帮助 返回顶部