PREDICTION OF ACOUSTIC PERFORMANCE IN EXPANSION CHAMBER MUFFLERS WITH MEAN FLOW BY FINITE ELEMENT METHOD

The equation of wave propagation in a circular chamber with mean flow is obtained. Computational solution based on finite element method is employed to determine the transmission loss of expansive chamber. The effect of the mean flow and geometry (length of expansion chamber and expansion ratio)on acoustic attenuation performance is discussed, the predicted values of transmission loss of expansion chamber without and with mean flow are compared with those reported in the literature and they agree well. The accuracy of the prediction of transmission loss implies that finite element approximations are applicable to a lot of practical applications.

Enhanced wave and finite element method for wave propagation and forced response prediction in periodic piezoelectric structures

As a promising numerical tool of structural dynamics in mid- and high frequencies, the wave and finite element method（WFEM） is receiving increasingly attention and applications. In this paper, an enhanced WFEM has been developed with a reduced model and a new eigenvalue scheme. The reduced model is applicable for structures with piezoelectric shunts or local dampers;the new eigenvalue scheme can mitigate the ill-conditioning when the wave basis is calculated. The enhanced WFEM is applied to a thin-wall structure with periodically distributed piezoelectric materials（PZT）. Both free wave characteristics and forced response are analyzed and the influences of the suggested enhancements are presented. It is shown that if the control factors are properly chosen, these enhancements can improve the accuracy while accelerating the calculation. Resulting from the complexity of the application, these enhancements are not optional but imperative.

Numerical Analyses of Caisson Breakwaters on Soft Foundations Under Wave Cyclic Loading

A caisson breakwater is built on soft foundations after replacing the upper soft layer with sand. This paper presents a dynamic finite element method to investigate the strength degradation and associated pore pressure development of the intercalated soft layer under wave cyclic loading. By combining the undrained shear strength with the empirical formula of overconsolidation clay produced by unloading and the development model of pore pressure, the dynamic degradation law that describes the undrained shear strength as a function of cycle number and stress level is derived. Based on the proposed dynamic degradation law and M-C yield criterion, a dynamic finite element method is numerically implemented to predict changes in undrained shear strength of the intercalated soft layer by using the general-purpose FEM software ABAQUS, and the accuracy of the method is verified. The effects of cycle number and amplitude of the wave force on the degradation of the undrained shear strength of the intercalated soft layer and the associated excess pore pressure response are investigated by analyzing an overall distribution and three typical sections underneath the breakwater. By comparing the undrained shear strength distributions obtained by the static method and the quasi-static method with the undrained shear strength distributions obtained by the dynamic finite element method in the three typical sections, the superiority of the dynamic finite element method in predicting changes in undrained shear strength is demonstrated.

Wave propagation of laminated composite plates via GPU-based wavelet finite element method

This paper presents a novel parallel implementation technology for wave-based structural health monitoring (SHM) in laminated composite plates. The wavelet-based B-spline wavelet on he interval (BSWI) element is constructed according to Hamilton’s principle, and the element by element algorithm is parallelly executed on graphics processing unit (GPU) using compute unified device architecture (CUDA) to get the responses in full wave field accurately. By means of the Fourier spectral analysis method,the Mindlin plate theory is selected for wave modeling of laminated composite plates while the Kirchhoff plate theory predicts unreasonably phase and group velocities. Numerical examples involving wave propagation in laminated composite plates without and with crack are performed and discussed in detail. The parallel implementation on GPU is accelerated 146 times comparing with the same wave motion problem executed on central processing unit (CPU). The validity and accuracy of the proposed parallel implementation are also demonstrated by comparing with conventional finite element method (FEM) and the computation time has been reduced from hours to minutes. The damage size and location have been successfully determined according to wave propagation results based on delay-and-sum (DAS). The results show that the proposed parallel implementation of wavelet finite element method (WFEM) is very appropriate and efficient for wave-based SHM in laminated composite plates.

TWO-DIMENSIONAL FINITE ELEMENT METHOD FOR DETERMINING NONLINEAR WAVE FORCES ON LARGE SUBMERGED BODIES

In this paper, we first develop the far field asymptotic solutions of the second-order scattering waves for the vertical plane problem taking the second-order Stokes waves as the incident waves. The asymptotic solutions satisfy the Laplace equation, the sea bed and free surface boundary conditions and are the out-going waves. Then the radiation conditions of the second-order mattering waves are derived by using the asymptotic solutions. By using the two-dimensinal finite clement method with the radiation conditions imposed on the ar- tificial boundaries, the computer program, known as 'NWF2', for determining nonlinear wave forces on large submerged bodies has been written. As a numerical example, nonlinear wave forces on a semi-circu- lar cylinder lying on the sea bed arc presented.

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media（HPDM）and the numerical condensed wave finite element method（CWFEM） are employed to study the longitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of frequency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.

NUMERICAL SOLUTION OF A NONLINEAR REACTION-DIFFUSION EQUATION

A nonlinear reaction-diffusion equation is studied numerically by a Petrov-Galerkin finite element method, which has been proved to be 2nd-order accurate in time and 4th-order in space. The comparison between the exact and numerical solutions of progressive waves shows that this numerical scheme is quite accurate, stable andefflcient. It is also shown that any local disturbance will spread, have a full growth and finally form two progressive waves propagating in both directions. The shape and the speed of the long term progressive waves are determined by the system itself, and do not depend on the details of the initial values.