基于Focal Loss改进LightGBM的供水管网毛刺数据检测

针对数据不平衡导致的管网毛刺数据检测召回率偏低问题,提出一种Focal Loss改进LightGBM的管网毛刺数据检测方法。首先,结合管网毛刺数据的特点,针对性构造邻域相关特征。其次,将Focal Loss函数引入LightGBM,提高模型对难以检测的毛刺样本的权重,并对Focal Loss不同的参数取值进行实验,以平衡精确率与召回率。最后,选择不同参数的Focal Loss进行模型融合,进一步提升模型对不平衡毛刺数据的检测性能。在某市供水管网的真实数据上进行实验,结果表明,对比基于交叉熵损失函数的单一模型,本文提出的Focal Loss改进后的融合模型在毛刺数据上召回率和F1值的提升幅度达33.3和18个百分点,但毛刺数据的精确率还有待进一步提升。本文所提方法从损失函数入手,动态调整难易样本的权重,有效地提升了不平衡数据下的毛刺数据的检测性能。

Prediction models of burst strength degradation for casing with considerations of both wear and corrosion

Casing wear and casing corrosion are serious problems affecting casing integrity failure in deep and ultra-deep wells.This paper aims to predict the casing burst strength with considerations of both wear and corrosion.Firstly,the crescent wear shape is simplified into three categories according to common mathematical models.Then,based on the mechano-electrochemical(M-E)interaction,the prediction model of corrosion depth is built with worn depth as the initial condition,and the prediction models of burst strength of the worn casing and corroded casing are obtained.Secondly,the accuracy of different prediction models is validated by numerical simulation,and the main influence factors on casing strength are obtained.At last,the theoretical models are applied to an ultra-deep well in Northwest China,and the dangerous well sections caused by wear and corrosion are predicted,and the corrosion rate threshold to ensure the safety of casing is obtained.The results show that the existence of wear defects results in a stress concentration and enhanced M-E interaction on corrosion depth growth.The accuracy of different mathematical models is different:the slot ring model is most accurate for predicting corrosion depth,and the eccentric model is most accurate for predicting the burst strength of corroded casing.The burst strength of the casing will be overestimated by more than one-third if the M-E interaction is neglected,so the coupling effect of wear and corrosion should be sufficiently considered in casing integrity evaluation.

Wearable Smart Sensor System for Medical Monitoring with an Assessment of the Level of Blood Loss and Pain Shock Because of Trauma or Injury

Blood loss in peacetime is mainly due to the normal menstrual cycle in women or diseases with surgical intervention. In wartime, blood loss in military personnel is a characteristic sign of a closed or open injury of the body during internal or external bleeding. Access to clinical care for wounded military personnel injured on the battlefield is limited and has long delays compared to patients in peacetime. Most of the deaths of wounded military personnel on the battlefield occur within the first hour after being wounded. The most common causes are delay in providing medical care, loss of time for diagnosis, delay in stabilization of pain shock and large blood loss. Some help in overcoming these problems is provided by the data in the individual capsule, which each soldier of the modern army possesses;however, data in an individual capsule is not sufficient to provide emergency medical care in field and hospital conditions. This paper considers a project for development of a smart real-time monitoring wearable system for blood loss and level of shock stress in wounded persons on the battlefield, which provides medical staff in field and hospital conditions with the necessary information to give timely medical care. Although the hospital will require additional information, the basic information about the victims will already be known before he enters the hospital. It is important to emphasize that the key term in this approach is monitoring. It is tracking, and not a one-time measurement of indicators, that is crucial in a valid definition of bleeding.

A crosstalk-free dual-mode sweat sensing system for naked-eye sweat loss quantification via changes in structural reflectance

Sweat loss monitoring is important for understanding the body’s thermoregulation and hydration status,as well as for comprehensive sweat analysis.Despite recent advances,developing a low-cost,scalable,and universal method for the fabrication of colorimetric microfluidics designed for sweat loss monitoring remains challenging.In this study,we propose a novel laserengraved surface roughening strategy for various flexible substrates.This process permits the construction of microchannels that show distinct structural reflectance changes before and after sweat filling.By leveraging these unique optical properties,we have developed a fully laser-engraved microfluidic device for the quantification of naked-eye sweat loss.This sweat loss sensor is capable of a volume resolution of 0.5µL and a total volume capacity of 11µL,and can be customized to meet different performance requirements.Moreover,we report the development of a crosstalk-free dual-mode sweat microfluidic system that integrates an Ag/AgCl chloride sensor and a matching wireless measurement flexible printed circuit board.This integrated system enables the real-time monitoring of colorimetric sweat loss signals and potential ion concentration signals without crosstalk.Finally,we demonstrate the potential practical use of this microfluidic sweat loss sensor and its integrated system for sports medicine via on-body studies.

Genetically modified pigs:Emerging animal models for hereditary hearing loss

Hereditary hearing loss(HHL),a genetic disorder that impairs auditory function,significantly affects quality of life and incurs substantial economic losses for society.To investigate the underlying causes of HHL and evaluate therapeutic outcomes,appropriate animal models are necessary.Pigs have been extensively used as valuable large animal models in biomedical research.In this review,we highlight the advantages of pig models in terms of ear anatomy,inner ear morphology,and electrophysiological characteristics,as well as recent advancements in the development of distinct genetically modified porcine models of hearing loss.Additionally,we discuss the prospects,challenges,and recommendations regarding the use pig models in HHL research.Overall,this review provides insights and perspectives for future studies on HHL using porcine models.

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

Effect of foot reflexology on an infant with sensorineural hearing loss:A case report

BACKGROUND Our study contributes to the further understanding of the mechanism of foot reflexology.Foot reflexology has been reported to affect hearing recovery,but no physiological evidence has been provided.This lack of evidence hampers the acceptance of the technique in clinical practice.CASE SUMMARY A girl was taken to North Sichuan Medical University Affiliated Hospital for a hearing screen by her parents.Her parents reported that her hearing level was the same as when she was born.The girl was diagnosed with sensorineural hearing loss(SNHL)by a doctor in the otolaryngology department.After we introduced the foot reflexology project,the parents agreed to participate in the experiment.After 6 months of foot reflexology treatment,the hearing threshold of the girl recovered to a normal level,below 30 dB.CONCLUSION Foot reflexology should be encouraged in clinical practice and for families of infants with SNHL.

Relative Impacts of Sea Ice Loss and Atmospheric Internal Variability on the Winter Arctic to East Asian Surface Air Temperature Based on Large-Ensemble Simulations with NorESM2

To quantify the relative contributions of Arctic sea ice and unforced atmospheric internal variability to the “warm Arctic, cold East Asia”(WACE) teleconnection, this study analyses three sets of large-ensemble simulations carried out by the Norwegian Earth System Model with a coupled atmosphere–land surface model, forced by seasonal sea ice conditions from preindustrial, present-day, and future periods. Each ensemble member within the same set uses the same forcing but with small perturbations to the atmospheric initial state. Hence, the difference between the present-day(or future) ensemble mean and the preindustrial ensemble mean provides the ice-loss-induced response, while the difference of the individual members within the present-day(or future) set is the effect of atmospheric internal variability. Results indicate that both present-day and future sea ice loss can force a negative phase of the Arctic Oscillation with a WACE pattern in winter. The magnitude of ice-induced Arctic warming is over four(ten) times larger than the ice-induced East Asian cooling in the present-day(future) experiment;the latter having a magnitude that is about 30% of the observed cooling. Sea ice loss contributes about 60%(80%) to the Arctic winter warming in the present-day(future) experiment. Atmospheric internal variability can also induce a WACE pattern with comparable magnitudes between the Arctic and East Asia. Ice-lossinduced East Asian cooling can easily be masked by atmospheric internal variability effects because random atmospheric internal variability may induce a larger magnitude warming. The observed WACE pattern occurs as a result of both Arctic sea ice loss and atmospheric internal variability, with the former dominating Arctic warming and the latter dominating East Asian cooling.

The effectiveness of different wear indicators in quantifying wear on railway wheels of freight wagons

Railway infrastructure relies on the dynamic interaction between wheels and rails;thus,assessing wheel wear is a critical aspect of maintenance and safety.This paper focuses on the wheel-rail wear indicator T-gamma(Tγ).Amidst its use,it becomes apparent that Tγ,while valuable,fails to provide a comprehensive reflection of the actual material removal and actual contact format,which means that using only Tγas a target for optimization of profiles is not ideal.In this work,three different freight wagons are evaluated:a meter-gauge and a broad-gauge heavy haul vehicles from South American railways,and a standard-gauge freight vehicle operated in Europe,with different axle loads and dissimilar new wheel/rail profiles.These vehicles are subjected to comprehensive multibody simulations on various tracks.The simulations aimed to elucidate the intricate relationship between different wear indicators:Tγ,wear index,material removal,and maximum wear depth,under diverse curves,non-compensated lateral accelerations(A_(nc)),and speeds.Some findings showed a correlation of 0.96 between Tγand wear depth and 0.82 between wear index and material removed for the outer wheel.From the results,the Tγis better than the wear index to be used when analyzing wear depth while the wear index is more suited to foresee the material lost.The results also show the low influence of A_(nc)on wear index and Tγ.By considering these factors together,the study aims to improve the understanding of wheel-rail wear by selecting the best wear analysis approaches based on the effectiveness of each parameter.

Velocity-Incorporated Wear Model of Rolling Guide Shoe Material Selection

To ensure an accurate selection of rolling guide shoe materials,an analysis of the intricate relationship between linear speed and wear is imperative.Finite element simulations and experimental measurements are employed to evaluate four distinct types of materials:polyurethane,rubber,polytetrafluoroethylene(PTFE),and nylon.The speed-index of each material is measured,serving as a preparation for subsequent analysis.Furthermore,the velocity-wear factor is determined,providing insights into the resilience and durability of the material across varying speeds.Additionally,a wear model tailored specifically for viscoelastic bodies is explored,which is pivotal in understanding the wear mechanisms within the material.Leveraging this model,wear predictions are made under higher speed conditions,facilitating the choice of material for rolling guide shoes.To validate the accuracy of the model,the predicted degree of wear is compared with experimental data,ensuring its alignment with both theoretical principles and real-world performance.This comprehensive analysis has verified the effectiveness of the model in the selection of materials under high-speed conditions,thereby offering confidence in its reliability and ensuring optimal performance.

Calculation and Analysis of TVMS Considering Profile Shifts and Surface Wear Evolution Process of Spur Gear

Profile shift is a highly effective technique for optimizing the performance of spur gear transmission systems.However,tooth surface wear is inevitable during gear meshing due to inadequate lubrication and long-term operation.Both profile shift and tooth surface wear(TSW)can impact the meshing characteristics by altering the involute tooth profile.In this study,a tooth stiffness model of spur gears that incorporates profile shift,TSW,tooth deformation,tooth contact deformation,fillet-foundation deformation,and gear body structure coupling is established.This model efficiently and accurately determines the time-varying mesh stiffness(TVMS).Additionally,an improved wear depth prediction method for spur gears is developed,which takes into consideration the mutually prime teeth numbers and more accurately reflects actual gear meshing conditions.Results show that consideration of the mutual prime of teeth numbers will have a certain impact on the TSW process.Furthermore,the finite element method(FEM)is employed to accurately verify the values of TVMS and load sharing ratio(LSR)of profile-shifted gears and worn gears.This study quantitatively analyzes the effect of profile shift on the surface wear process,which suggests that gear profile shift can partially alleviate the negative effects of TSW.The contribution of this study provides valuable insights into the design and maintenance of spur gear systems.

On the Polygonal Wear Evolution of Heavy-Haul Locomotive Wheels due to Wheel/Rail Flexibility and Its Mitigation Measures

Wheel polygonal wear can immensely worsen wheel/rail interactions and vibration performances of the train and track,and ultimately,lead to the shortening of service life of railway components.At present,wheel/rail medium-or high-frequency frictional interactions are perceived as an essential reason of the high-order polygonal wear of railway wheels,which are potentially resulted by the flexible deformations of the train/track system or other external excitations.In this work,the effect of wheel/rail flexibility on polygonal wear evolution of heavy-haul locomotive wheels is explored with aid of the long-term wheel polygonal wear evolution simulations,in which different flexible modeling of the heavy-haul wheel/rail coupled system is implemented.Further,the mitigation measures for the polygonal wear of heavy-haul locomotive wheels are discussed.The results point out that the evolution of polygonal wear of heavy-haul locomotive wheels can be veritably simulated with consideration of the flexible effect of both wheelset and rails.Execution of mixed-line operation of heavy-haul trains and application of multicut wheel re-profiling can effectively reduce the development of wheel polygonal wear.This research can provide a deep-going understanding of polygonal wear evolution mechanism of heavy-haul locomotive wheels and its mitigation measures.

Advances in wearable and implantable bioelectronics for precision medicine

The continuous pursuit for a better quality of life promotes continuous advancements in intelligent technology.Flexible wearable and implantable bioelectronics have emerged as an innovative complement to rigid material-based electronic devices[1-3].Due to their distinct advantages in terms of ductile,ultrathin,and biocompatible features,these elastic and soft bioelectronic devices can be seamlessly mounted onto various real or artificial tissues and organs.

Health behavior outcomes in stroke survivors prescribed wearables for atrial fibrillation detection stratified by age

BACKGROUND Smartwatches have become readily accessible tools for detecting atrial fibrillation(AF).There remains limited data on how they affect psychosocial outcomes and engagement in older adults.We examine the health behavior outcomes of stroke survivors prescribed smartwatches for AF detection stratified by age.METHODS We analyzed data from the Pulsewatch study,a randomized controlled trial that enrolled patients(≥50 years)with a history of stroke or transient ischemic attack and CHA2DS2-VASc≥2.Intervention participants were equipped with a cardiac patch monitor and a smartwatch-app dyad,while control participants wore the cardiac patch monitor for up to 44 days.We evaluated health behavior parameters using standardized tools,including the Consumer Health Activation Index,the Generalized Anxiety Disorder questionnaire,the 12-Item Short Form Health Survey,and wear time of participants categorized into three age groups:Group 1(ages 50-60),Group 2(ages 61-69),and Group 3(ages 70-87).We performed statistical analysis using a mixedeffects repeated measures linear regression model to examine differences amongst age groups.RESULTS Comparative analysis between Groups 1,2 and 3 revealed no significant differences in anxiety,patient activation,perception of physical health and wear time.The use of smartwatch technology was associated with a decrease in perception of mental health for Group 2 compared to Group 1(β=-3.29,P=0.046).CONCLUSION Stroke survivors demonstrated a willingness to use smartwatches for AF monitoring.Importantly,among these study participants,the majority did not experience negative health behavior outcomes or decreased engagement as age increased.

Automated Actuarial Data Analytics-Based Inflation Adjusted Frequency Severity Loss Reserving Model

In this paper, the Automated Actuarial Loss Reserving Model is developed and extended using machine learning. The traditional actuarial reserving techniques are no longer compatible with the increase in technological advancement currently at hand. As a result, the development of the alternative Artificial Intelligence Based Automated Actuarial Loss Reserving Methodology which captures diverse risk profiles for various policyholders through augmenting the Micro Finance services, Auto Insurance Services and Both Services lines of business on the same platform through the computation of the Comprehensive Automated Actuarial Loss Reserves (CAALR) has been implemented in this paper. The introduction of the four further types of actuarial loss reserves to those existing in the actuarial literature seems to significantly reduce lapse rates, reduce the reinsurance costs as well as expenses and outgo. As a matter of consequence, this helps to bring together a combination of new and existing policyholders in the insurance company. The frequency severity models have been extended in this paper using ten machine learning algorithms which ultimately leads to the derivation of the proposed machine learning-based actuarial loss reserving model which remarkably performed well when compared to the traditional chain ladder actuarial reserving method using simulated data.

Hemoglobin loss method calculates blood loss during pancreaticoduodenectomy and predicts bleeding-related risk factors

BACKGROUND The common clinical method to evaluate blood loss during pancreaticoduoden-ectomy(PD)is visual inspection,but most scholars believe that this method is extremely subjective and inaccurate.Currently,there is no accurate,objective me-thod to evaluate the amount of blood loss in PD patients.We retrospectively analyzed the clinical data of 341 patients who underwent PD in Shandong Provincial Hospital from March 2017 to February 2019.According to different surgical methods,they were divided into an open PD(OPD)group and a laparoscopic PD(LPD)group.The differences and correlations between the in-traoperative estimation of blood loss(IEBL)obtained by visual inspection and the intraoperative calculation of blood loss(ICBL)obtained using the Hb loss method were analyzed.ICBL,IEBL and perioperative calculation of blood loss(PCBL)were compared between the two groups,and single-factor regression analysis was performed.RESULTS There was no statistically significant difference in the preoperative general patient information between the two groups(P>0.05).PD had an ICBL of 743.2(393.0,1173.1)mL and an IEBL of 100.0(50.0,300.0)mL(P<0.001).There was also a certain correlation between the two(r=0.312,P<0.001).Single-factor analysis of ICBL showed that a history of diabetes[95%confidence interval(CI):53.82-549.62;P=0.017]was an independent risk factor for ICBL.In addition,the single-factor analysis of PCBL showed that body mass index(BMI)(95%CI:0.62-76.75;P=0.046)and preoperative total bilirubin>200μmol/L(95%CI:7.09-644.26;P=0.045)were independent risk factors for PCBL.The ICBLs of the LPD group and OPD group were 767.7(435.4,1249.0)mL and 663.8(347.7,1138.2)mL,respectively(P>0.05).The IEBL of the LPD group 200.0(50.0,200.0)mL was slightly greater than that of the OPD group 100.0(50.0,300.0)mL(P>0.05).PCBL was greater in the LPD group than the OPD group[1061.6(612.3,1632.3)mL vs 806.1(375.9,1347.6)mL](P<0.05).CONCLUSION The ICBL in patients who underwent PD was greater than the IEBL,but there is a certain correlation between the two.The Hb loss method can be used to evaluate intraoperative blood loss.A history of diabetes,preoperative bilirubin>200μmol/L and high BMI increase the patient's risk of bleeding.

Wear dependent virtual flow rate sensor for progressing cavity pumps with deformable stator

This contribution presents a novel wear dependent virtual flow rate sensor for single stage single lobe progressing cavity pumps. We study the wear-induced material loss of the pump components and the impact of this material loss on the volumetric efficiency. The results are combined with an established backflow model to implement a backflow calculation procedure that is adaptive to wear. We use a laboratory test setup with a highly abrasive fluid and operate a pump from new to worn condition to validate our approach. The obtained measurement data show that the presented virtual sensor is capable of calculating the flow rate of a pump being subject to wear during its regular operation.

Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear

Ceramic cutting inserts are a type of cutting tool commonly used in high-speed metal cutting applications.However,the wear of these inserts caused by friction between the workpiece and cutting inserts limits their overall effectiveness.In order to improve the tool life and reduce wear,this study introduces an emerging method called magnetic field-assisted batch polishing(MABP)for simultaneously polishing multiple ceramic cutting inserts.Several polishing experiments were conducted under different conditions,and the wear characteristics were clarified by cutting S136H steel.The results showed that after 15 min of polishing,the surface roughness at the flank face,edge,and nose of the inserts was reduced to below 2.5 nm,6.25 nm,and 45.8 nm,respectively.Furthermore,the nose radii of the inserts did not change significantly,and there were no significant changes in the weight percentage of elements before and after polishing.Additionally,the tool life of the batch polished inserts was found to be up to 1.75 times longer than that of unpolished inserts.These findings suggest that the MABP method is an effective way to mass polish ceramic cutting inserts,resulting in significantly reduced tool wear.Furthermore,this novel method offers new possibilities for polishing other tools.

Evaluating foot reflexology as a proposed treatment for sensorineural hearing loss:A critical review

This editorial critically evaluates the application of foot reflexology as a treatment for sensorineural hearing loss(SNHL)in infants,as proposed in a case report published in the World of Clinical Cases.SNHL is a condition characterized by damage to the cochlea or the neural pathways that transmit auditory information to the brain.The etiology of SNHL is often complex,involving genetic mutations,prenatal factors,or perinatal insults.Reflexology,an alternative therapy involving the application of pressure to specific points on the feet,is based on the hypothesis that these points correspond to different organs and systems in the body,including the auditory system.However,the biological plausibility and clinical efficacy of foot reflexology in addressing SNHL lack empirical support.This editorial examines the pathophysiology of SNHL,assesses the clinical claims of reflexology practitioners,and emphasizes the necessity of evidence-based approaches in treating infant hearing loss.While complementary therapies may provide ancillary benefits,they should not supplant validated medical treatments in managing SNHL in infants.Further research is needed to evaluate the safety and efficacy of foot reflexology and other alternative therapies in pediatric audiology.

Numerical study of alpha particle loss with toroidal field ripple based on CFETR steady-state scenario

Effects of plasma equilibrium parameters on the alpha particle loss with the toroidal field ripple based on the CFETR steady-state scenario have been numerically investigated by the orbit-following code GYCAVA. It is found that alpha particle losses decrease and loss regions become narrower with the plasma current increasing or with the magnetic field decreasing. It is because the ripple stochastic transport and the ripple well loss of alpha particle are reduced with the safety factor decreasing. Decrease of the plasma density and temperature can reduce alpha particle losses due to enhancement of the slowing-down effect. The direction of the toroidal magnetic field can significantly affect heat loads induced by lost alpha particle. The vertical asymmetry of heat loads induced by the clockwise and counter-clockwise toroidal magnetic fields are due to the fact that the ripple distribution is asymmetric about the mid-plane, which can be explained by the typical orbits of alpha particle. The maximal heat load of alpha particle for the clockwise toroidal magnetic field is much smaller than that for the counter-clockwise one.