A STUDY OF THE INFLUENCE OF MICROPHYSICAL PROCESSES ON TYPHOON NIDA(2016) USING A NEW DOUBLE-MOMENT MICROPHYSICS SCHEME IN THE WEATHER RESEARCH AND FORECASTING MODEL

The basic structure and cloud features of Typhoon Nida(2016) are simulated using a new microphysics scheme(Liuma) within the Weather Research and Forecasting(WRF) model. Typhoon characteristics simulated with the Liuma microphysics scheme are compared with observations and those simulated with a commonly-used microphysics scheme(WSM6). Results show that using different microphysics schemes does not significantly alter the track of the typhoon but does significantly affect the intensity and the cloud structure of the typhoon. Results also show that the vertical distribution of cloud hydrometeors and the horizontal distribution of peripheral rainband are affected by the microphysics scheme. The mixing ratios of rain water and graupel correlate highly with the vertical velocity component and equivalent potential temperature at the typhoon eye-wall region. According to the simulation with WSM 6 scheme,it is likely that the very low typhoon central pressure results from the positive feedback between hydrometeors and typhoon intensity. As the ice-phase hydrometeors are mostly graupel in the Liuma microphysics scheme, further improvement in this aspect is required.

A Methodological Study on Using Weather Research and Forecasting(WRF) Model Outputs to Drive a One-Dimensional Cloud Model

A new method for driving a One-Dimensional Stratiform Cold （1DSC） cloud model with Weather Research and Fore casting （WRF） model outputs was developed by conducting numerical experiments for a typical large-scale stratiform rainfall event that took place on 4-5 July 2004 in Changchun, China. Sensitivity test results suggested that, with hydrometeor pro files extracted from the WRF outputs as the initial input, and with continuous updating of soundings and vertical velocities （including downdraft） derived from the WRF model, the new WRF-driven 1DSC modeling system （WRF-1DSC） was able to successfully reproduce both the generation and dissipation processes of the precipitation event. The simulated rainfall intensity showed a time-lag behind that observed, which could have been caused by simulation errors of soundings, vertical velocities and hydrometeor profiles in the WRF output. Taking into consideration the simulated and observed movement path of the precipitation system, a nearby grid point was found to possess more accurate environmental fields in terms of their similarity to those observed in Changchun Station. Using profiles from this nearby grid point, WRF-1DSC was able to repro duce a realistic precipitation pattern. This study demonstrates that 1D cloud-seeding models do indeed have the potential to predict realistic precipitation patterns when properly driven by accurate atmospheric profiles derived from a regional short range forecasting system, This opens a novel and important approach to developing an ensemble-based rain enhancement prediction and operation system under a probabilistic framework concept.

Artificial Intelligence Based Meteorological Parameter Forecasting for Optimizing Response of Nuclear Emergency Decision Support System

This paper presents a novel artificial intelligence (AI) based approach to predict crucial meteorological parameters such as temperature,pressure,and wind speed,typically calculated from computationally intensive weather research and forecasting (WRF) model.Accurate meteorological data is indispensable for simulating the release of radioactive effluents,especially in dispersion modeling for nuclear emergency decision support systems.Simulation of meteorological conditions during nuclear emergencies using the conventional WRF model is very complex and time-consuming.Therefore,a new artificial neural network (ANN) based technique was proposed as a viable alternative for meteorological prediction.A multi-input multi-output neural network was trained using historical site-specific meteorological data to forecast the meteorological parameters.Comprehensive evaluation of this technique was conducted to test its performance in forecasting various parameters including atmospheric pressure,temperature,and wind speed components in both East-West and North-South directions.The performance of developed network was evaluated on an unknown dataset,and acquired results are within the acceptable range for all meteorological parameters.Results show that ANNs possess the capability to forecast meteorological parameters,such as temperature and pressure,at multiple spatial locations within a grid with high accuracy,utilizing input data from a single station.However,accuracy is slightly compromised when predicting wind speed components.Root mean square error (RMSE) was utilized to report the accuracy of predicted results,with values of 1.453℃for temperature,77 Pa for predicted pressure,1.058 m/s for the wind speed of U-component and 0.959 m/s for the wind speed of V-component.In conclusion,this approach offers a precise,efficient,and wellinformed method for administrative decision-making during nuclear emergencies.

Numerical Simulation of the Heavy Rainfall in the Yangtze-Huai River Basin during Summer 2003 Using the WRF Model

In this study, a 47-day regional climate simulation of the heavy rainfall in the Yangtze-Huai River Basin during the summer of 2003 was conducted using the Weather Research and Forecast （WRY） model. The simulation reproduces reasonably well the evolution of the rainfall during the study period＇s three successive rainy phases, especially the frequent heavy rainfall events occurring in the Huai River Basin. The model captures the major rainfall peak observed by the monitoring stations in the morning. Another peak appears later than that shown by the observations. In addition, the simulation realistically captures not only the evolution of the low-level winds but also the characteristics of their diurnal variation. The strong southwesterly （low-level jet, LLJ） wind speed increases beginning in the early evening and reaches a peak in the morning; it then gradually decreases until the afternoon. The intense LLJ forms a strong convergent circulation pattern in the early morning along the Yangtze-Huai River Basin. This pattern partly explains the rainfall peak observed at this time. This study furnishes a basis for the further analysis of the mechanisms of evolution of the LLJ and for the further study of the interactions between the LLJ and rainfall.

Validation of WRF model on simulating forcing data for Heihe River Basin

The research of coupling WRF （Weather Research and Forecasting Model） with a land surface model is enhanced to explore the interaction of the atmosphere and land surface; however, regional applicability of WRF model is questioned. In order to do the validation of WRF model on simulating forcing data for the Heihe River Basin, daily meteorological observation data from 15 stations of CMA （China Meteorological Administration） and hourly meteorological observation data from seven sites of WATER （Watershed Airborne Telemetry Experimental Research） are used to compare with WRF simulations, with a time range of a whole year for 2008. Results show that the average MBE （Mean Bias Error） of daily 2-m surface temperature, surface pressure, 2-m relative humidity and 10-m wind speed were -0.19 ℃, -4.49 hPa, 4.08% and 0.92 m/s, the average RMSE （Root Mean Square Error） of them were 2.11 ℃, 5.37 hPa, 9.55% and 1.73 m/s, and the average R （correlation coefficient） of them were 0.99, 0.98, 0.80 and 0.55, respectively. The average MBE of hourly 2-m surface temperature, surface pressure, 2-m relative humidity, 10-m wind speed, downward shortwave radiation and downward longwave were-0.16 ℃,-6.62 hPa,-5.14%, 0.26 m/s, 33.0 W/m^2 and-6.44 W/m^2, the average RMSE of them were 2.62 ℃, 17.10 hPa, 20.71%, 2.46 m/s, 152.9 W/m^2 and 53.5 W/m^2, and the average R of them were 0.96, 0.97, 0.70, 0.26, 0.91 and 0.60, respectively. Thus, the following conclusions were obtained： （1） regardless of daily or hourly validation, WRF model simulations of 2-m surface temperature, surface pressure and relative humidity are more reliable, especially for 2-m surface air temperature and surface pressure, the values of MBE were small and R were more than 0.96; （2） the WRF simulating downward shortwave radiation was relatively good, the average R between WRF simulation and hourly observation data was above 0.9, and the average R of downward longwave radiation was 0.6; （3） both wind speed and rainfall simulated from WRF model did not agree well with observation data.

Parametric sensitivity analysis of precipitation and temperature based on multi-uncertainty quantification methods in the Weather Research and Forecasting model

Sensitivity analysis(SA) has been widely used to screen out a small number of sensitive parameters for model outputs from all adjustable parameters in weather and climate models, helping to improve model predictions by tuning the parameters. However, most parametric SA studies have focused on a single SA method and a single model output evaluation function, which makes the screened sensitive parameters less comprehensive. In addition, qualitative SA methods are often used because simulations using complex weather and climate models are time-consuming. Unlike previous SA studies, this research has systematically evaluated the sensitivity of parameters that affect precipitation and temperature simulations in the Weather Research and Forecasting(WRF) model using both qualitative and quantitative global SA methods. In the SA studies, multiple model output evaluation functions were used to conduct various SA experiments for precipitation and temperature. The results showed that five parameters(P3, P5, P7, P10, and P16) had the greatest effect on precipitation simulation results and that two parameters(P7 and P10) had the greatest effect for temperature. Using quantitative SA, the two-way interactive effect between P7 and P10 was also found to be important, especially for precipitation. The microphysics scheme had more sensitive parameters for precipitation, and P10(the multiplier for saturated soil water content) was the most sensitive parameter for both precipitation and temperature. From the ensemble simulations, preliminary results indicated that the precipitation and temperature simulation accuracies could be improved by tuning the respective sensitive parameter values, especially for simulations of moderate and heavy rain.

两种再分析资料和Nudging方法在WRF模式降水模拟中的适用性

采用Grid Nudging(GN)和Spectral Nudging(SN)方法,用再分析资料ERA5和FNL驱动中尺度数值天气预报模式(WRF),探究不同再分析资料和Nudging方法对降水模拟效果的改进效果及机理.对2021年3月15日中国南方地区降水过程设计6组试验进行数值模拟,分析不同试验方案对降水及相关物理量的影响.结果表明,WRF模式能较好地模拟出本次降水事件,进行Nudging驱动后显著提升了降水分布、降水中心落区和降水量的模拟效果.与观测数据综合对比,GN的模拟效果优于SN,尤其是使用ERA5资料结合GN模拟效果最佳,能够准确地模拟出发生在安徽省南部的降水中心以及超过33 mm/d的降水强度.模式结果与两个观测站点记录的降水发生时间和降水强度变化较为一致.GN方法使模式有效提高了西南低空急流的强度,校正了风向,对水汽通量和水汽通量散度的刻画更符合实际情况.

Solar Energy Resource Characteristics of Photovoltaic Power Station in Shandong Province

[Objective] The aim was to analyze characters of solar energy in photo- voltaic power stations in Shandong Province. [Method] The models of total solar radiation and scattered radiation were determined, and solar energy resources in pho-tovoltaic power stations were evaluated based on illumination in horizontal plane and cloud data in 123 counties or cities and observed information in Jinan, Fushan and Juxian in 1988-2008. [Result] Solar energy in northern regions in Shandong proved most abundant, which is suitable for photovoltaic power generation; the optimal angle of tilt of photovoltaic array was at 35°, decreasing by 2°-3° compared with local latitude. Total solar radiation received by the slope with optimal angle of tilt exceeded 1 600 kw.h/（m2.a）, increasing by 16% compared with horizontal planes. The maximal irradiance concluded by WRF in different regions tended to be volatile in 1 020-1 060 W/m2. [Conclusion] The research provides references for construction of photovoltaic power stations in Shandong Province.

基于WRF模拟的中国西北河谷城市夏季的大气边界层特征

为提高河谷地形气象场的模拟效果,利用第5代再分析资料(ERA5)和全球再分析资料(FNL)作为初始场,以天水市为研究对象,驱动中尺度天气预报模式比较对西北河谷城市边界层模拟的适用性,分析西北河谷城市夏季的大气边界层特征.结果表明, ERA5模拟的天水市主城区近地面温度、近地面风速、风向以及相对湿度与观测值的相关性更好,尤其是近地面风速和风向,分别比FNL模拟的结果提升25.4%和70.0%.天水市主城区的气象场空间分布呈明显的城市热岛效应和山谷风环流,相对开阔的麦积区城市热岛效应更强;白天发生的降水会弱化谷风环流和热岛效应,河谷内及周边风速均较小.天水市主城区夏季近地面温度与风速呈正相关,与相对湿度呈负相关,大气边界层高度呈现明显的日变化,大气层结稳定.

Impacts of Roof/Ground Mitigation Strategies on Improving the Urban Thermal Environment and Human Comfort over the Yangtze River Delta, China

The combined effects of global warming and the urban heat islands exacerbate the risk of urban heat stress. It is crucial to implement effective cooling measures in urban areas to improve the comfort of the thermal environment. In this study, the Weather Research and Forecasting Model(WRF), coupled with a single-layer Urban Canopy Model(UCM), was used to study the impact of heat mitigation strategies. In addition, a 5-km resolution land-cover dataset for China(ChinaLC), which is based on satellite remote sensing data, was adjusted and used, and 18 groups of numerical experiments were designed, to increase the albedo and vegetation fraction of roof/ground parameters. The experiments were conducted for four heatwave events that occurred in the summer of 2013 in the Yangtze River Delta urban agglomeration of China. The simulated results demonstrated that, for the single roof/ground schemes, the mitigation effects were directly proportional to the albedo and greening. Among all the experimental schemes, the superposed schemes presented better cooling effects. For the ground greening scheme, with similar net radiation flux and latent heat flux, its storage heat was lower than that of the roof greening scheme, resulting in more energy flux into the atmosphere, and its daytime cooling effect was not as good as that of the roof greening scheme. In terms of human thermal comfort(HTC), the improvement achieved by the ground greening scheme was better than any other single roof/ground schemes, because the increase in the relative humidity was small. The comprehensive evaluation of the mitigation effects of different schemes on the thermal environment presented in this paper provides a theoretical basis for improving the urban environment through rational urban planning and construction.

Improving the Forecasts of Coastal Wind Speeds in Tianjin,China Based on the WRF Model with Machine Learning Algorithms

Characterized by sudden changes in strength,complex influencing factors,and significant impacts,the wind speed in the circum-Bohai Sea area is relatively challenging to forecast.On the western side of Bohai Bay,as the economic center of the circum-Bohai Sea,Tianjin exhibits a high demand for accurate wind forecasting.In this study,three machine learning algorithms were employed and compared as post-processing methods to correct wind speed forecasts by the Weather Research and Forecast(WRF)model for Tianjin.The results showed that the random forest(RF)achieved better performance in improving the forecasts because it substantially reduced the model bias at a lower computing cost,while the support vector machine(SVM)performed slightly worse(especially for stronger winds),but it required an approximately 15 times longer computing time.The back propagation(BP)neural network produced an average forecast significantly closer to the observed forecast but insufficiently reduced the RMSE.In regard to wind speed frequency forecasting,the RF method commendably corrected the forecasts of the frequency of moderate(force 3)wind speeds,while the BP method showed a desirable capability for correcting the forecasts of stronger(force>6)winds.In addition,the 10-m u and v components of wind(u_(10)and v_(10)),2-m relative humidity(RH_(2))and temperature(T_(2)),925-hPa u(u925),sea level pressure(SLP),and 500-hPa temperature(T_(500))were identified as the main factors leading to bias in wind speed forecasting by the WRF model in Tianjin,indicating the importance of local dynamical/thermodynamic processes in regulating the wind speed.This study demonstrates that the combination of numerical models and machine learning techniques has important implications for refined local wind forecasting.

Simulation of Quasi-Linear Mesoscale Convective Systems in Northern China：Lightning Activities and Storm Structure

Two intense quasi-linear mesoscale convective systems（QLMCSs） in northern China were simulated using the WRF（Weather Research and Forecasting） model and the 3D-Var（three-dimensional variational） analysis system of the ARPS（Advanced Regional Prediction System） model.A new method in which the lightning density is calculated using both the precipitation and non-precipitation ice mass was developed to reveal the relationship between the lightning activities and QLMCS structures.Results indicate that,compared with calculating the results using two previous methods,the lightning density calculated using the new method presented in this study is in better accordance with observations.Based on the calculated lightning densities using the new method,it was found that most lightning activity was initiated on the right side and at the front of the QLMCSs,where the surface wind field converged intensely.The CAPE was much stronger ahead of the southeastward progressing QLMCS than to the back it,and their lightning events mainly occurred in regions with a large gradient of CAPE.Comparisons between lightning and non-lightning regions indicated that lightning regions featured more intense ascending motion than non-lightning regions;the vertical ranges of maximum reflectivity between lightning and non-lightning regions were very different;and the ice mixing ratio featured no significant differences between the lightning and non-lightning regions.

Simulations of Microphysics and Precipitation in a Stratiform Cloud Case over Northern China:Comparison of Two Microphysics Schemes

Using the Weather Research and Forecasting(WRF)model with two different microphysics schemes,the Predicted Particle Properties(P3)and the Morrison double-moment parameterizations,we simulated a stratiform rainfall event on 20–21 April 2010.The simulation output was compared with precipitation and aircraft observations.The aircraft-observed moderate-rimed dendrites and plates indicated that riming contributed significantly to ice particle growth at the mature precipitation stage.Observations of dendrite aggregation and capped columns suggested that aggregation coexisted with deposition or riming and played an important role in producing many large particles.The domain-averaged values of the 24-h surface precipitation accumulation from the two schemes were quite close to each other.However,differences existed in the temporal and spatial evolutions of the precipitation distribution.An analysis of the surface precipitation temporal evolution indicated faster precipitation in Morrison,while P3 indicated slower rainfall by shifting the precipitation pattern eastward toward what was observed.The differences in precipitation values between the two schemes were related to the cloud water content distribution and fall speeds of rimed particles.P3 simulated the stratiform precipitation event better as it captured the gradual transition in the mass-weighted fall speeds and densities from unrimed to rimed particles.

Simulation of a torrential rainstorm in Xinjiang and gravity wave analysis

We used a weather research and forecasting model to simulate a torrential rainstorm that occurred in Xinjiang,China during June 16–17,2016.The model successfully simulated the rainfall area,precipitation intensity,and changes in precipitation.We identified a clear wave signal using the two-dimensional fast Fourier transform method;the waves propagated westwards,with wavelengths of 45–20 km,periods of 50–120 min,and phase velocities mainly concentrated in the-25 m/s to-10 m/s range.The results of wavelet cross-spectral analysis further confirmed that the waves were gravity waves,peaking at 11:00 UTC,June 17,2016.The gravity wave signal was identified along 79.17–79.93°E,81.35–81.45°E and 81.5–81.83°E.The gravity waves detected along 81.5–81.83°E corresponded well with precipitation that accumulated in 1 h,indicating that gravity waves could be considered a rainstorm precursor in future precipitation forecasts.

Increases in Anthropogenic Heat Release from Energy Consumption Lead to More Frequent Extreme Heat Events in Urban Cities

With economic development and rapid urbanization,increases in Gross Domestic Product and population in fastgrowing cities since the turn of the 21st Century have led to increases in energy consumption.Anthropogenic heat flux released to the near-surface atmosphere has led to changes in urban thermal environments and severe extreme temperature events.To investigate the effects of energy consumption on urban extreme temperature events,including extreme heat and cold events,a dynamic representation scheme of anthropogenic heat release(AHR)was implemented in the Advanced Research version of the Weather Research and Forecasting(WRF)model,and AHR data were developed based on energy consumption and population density in a case study of Beijing,China.Two simulations during 1999−2017 were then conducted using the developed WRF model with 3-km resolution with and without the AHR scheme.It was shown that the mean temperature increased with the increase in AHR,and more frequent extreme heat events were produced,with an annual increase of 0.02−0.19 days,as well as less frequent extreme cold events,with an annual decrease of 0.26−0.56 days,based on seven extreme temperature indices in the city center.AHR increased the sensible heat flux and led to surface energy budget changes,strengthening the dynamic processes in the atmospheric boundary layer that reduce AHR heating efficiency more in summer than in winter.In addition,it was concluded that suitable energy management might help to mitigate the impact of extreme temperature events in different seasons.

Deriving Changjiang coastal zone wind from C-band SAR and its application to salinity simulation

Wind plays an important role in hydrodynamic processes such as the expansion of Changjiang （Yangtze） River Diluted Water （CDW）, and shelf circulation in the Changjiang estuary. Thus, it is essential to include wind in the numerical simulation of these phenomena. Synthetic aperture radar （SAR） with high resolution and wide spatial coverage is valuable for measuring spatially inhomogeneous ocean surface wind fields. We have collected 87 ERS-2 SAR images with wind-induced streaks that cover the Cbangjiang coastal area, to verify and improve the validity of wind direction retrieval using the 2D fast Fourier transform method. We then used these wind directions as inputs to derive SAR wind speeds using the C-band model. To demonstrate the applicability of the algorithms, we validated the SAR-retrieved wind fields using QuikSCAT measurements and the atmospheric Weather Research Forecasting model. In general, we found good agreement between the datasets, indicating the reliability and applicability of SAR- retrieved algorithms under different atmospheric conditions. We investigated the main error sources of this process, and conducted sensitivity analyses to estimate the wind speed errors caused by the effect of speckle, uncertainties in wind direction, and inaccuracies in the normalized radar cross section. Finally, we used the SAR-retrieved wind fields to simulate the salinity distribution off the Changjiang estuary. The findings of this study will be valuable for wind resource assessment and the development of future numerical ocean models based on SAR images.

不同云微物理方案对飞机结冰气象条件预测评估分析

飞行安全在复杂气象条件下易受结冰影响而受到威胁。能够结合地形特征并准确预测结冰气象条件是保障飞行安全的重要因素。本文利用中尺度天气预报模型模式,以4种不同的云微物理方案组合对美国华盛顿山地区的两次结冰事件进行了数值模拟。结果表明:预测的液态水含量和温度与现有文献匹配较好,而Morrison方案组合在误差分析中表现最佳。此外,讨论了水平分辨率和云微物理方案对液态水含量和云中液滴平均有效直径预测的敏感性。由于地形所引起的垂直运动是产生云水的主要动因,较高的水平分辨率能够做出更为准确的预测。最后利用IC指数对结冰强度进行了分析,表明结冰严重程度具有明显的时空多变特性,以及对云微物理方案的敏感性。本文工作有望加强对云微物理方案的理解和认识,并为选择适合的云微物理方案进行结冰天气预测提供了依据。

基于生态空间微气候调节的城市与水体相互影响作用研究——以水网城市武汉为例

文章以水网城市武汉为例,旨在讨论城市与水体之间的气候调节影响作用,并找到应对城市高强度发展的生态空间调节策略,改善城市气候环境。在中尺度气象模式中构建了高分辨率城市冠层模型,模拟分析了不同季节水体的微气候调节作用,发现:夏季水体对城区有明显的降温效果,日间平均降温幅度达到0.5℃;过渡季(秋季)日出前水体对地表气温增幅达0.6℃,能够有效缓解辐射逆温现象;冬季夜间水体将主城区风速提升了0.2m/s,能够帮助城市空气污染物的疏散,减少雾霾现象。此外,建筑密度的升高增强了水体与高空的对流换热,而城市容积率的升高则削弱了水体的降温效果。

不同陆面过程方案对兰州地区一次强降水对流触发的影响

2018年4月19日,兰州地区发生罕见局地强降水,造成严重城市内涝.为了研究陆面过程对此次降水模拟的影响,选取陆面模式RUC、CLM4和NOAH与中尺度天气预报模式进行耦合,重点分析不同陆面参数化方案对于对流触发的影响.结果表明,RUC能合理地再现此次降水过程,尤其是兰州上空的对流触发过程.陆-气相互作用分析表明,不同陆面过程参数化方案模拟的对流有效位能、对流抑制能、地表感热通量和潜热通量及边界层的时空演化均不同,最终影响对流触发的时空位置.陆面过程参数化方案对此次局地强对流降水模拟的结果影响很大.

Evaluation of the Forecast Accuracy of Near-Surface Temperature and Wind in Northwest China Based on the WRF Model

This study investigated the performance of the mesoscale Weather Research and Forecasting(WRF) model in predicting near-surface atmospheric temperature and wind for a complex underlying surface in Northwest China in June and December 2015. The spatial distribution of the monthly average bias errors in the forecasts of 2-m temperature and 10-m wind speed is analyzed first. It is found that the forecast errors for 2-m temperature and 10-m wind speed in June are strongly correlated with the terrain distribution. However, this type of correlation is not apparent in December, perhaps due to the inaccurate specification of the surface albedo and freezing-thawing process of frozen soil in winter in Northwest China in the WRF model. In addition, the WRF model is able to reproduce the diurnal variation in 2-m temperature and 10-m wind speed, although with weakened magnitude. Elevations and land-use types have strong influences on the forecast of near-surface variables with seasonal variations. The overall results imply that accurate specification of the complex underlying surface and seasonal changes in land cover is necessary for improving near-surface forecasts over Northwest China.