Kinematic Modeling and Characteristic Analysis of Eccentric Conjugate Non-circular Gear & Crank-Rocker & Gears Train Weft Insertion Mechanism

A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's weft insertion mechanism as well as reduce the manufacturing difficulty. Meanwhile, based on the working principle of this mechanism, kinematical mathematic models of this mechanism were established and an aided analysis and simulation software was compiled. The influences of eccentricity ratio, deformation coefficient, and other important parameters on the kinematics characteristics of this mechanism were analyzed by using the software. A group of preferable parameters which could meet the requirements of weft insertion technology were obtained by means of human-computer interactive optimization method. The maximum velocity, maximum acceleration, and variation of acceleration of this mechanism are smaller than those of the conjugate cam weft insertion mechanism applied on TT96 rapier loom under the conditions of the same unilateral total stroke of rapier head and the same rotary speed of loom spindle; meanwhile the other demands of weaving technology can be met by this novel weft insertion mechanism.

An Optimization Design of a Weft Insertion Mechanism for Rapier Looms

By analyzing a combined and spatial 6-bar linkage weft insertion mechanism, its practical model for optimization design is set up and the modification of penalty strategy is put forward so that the genetic algorithm can be better used in optimization design for mechanisms with non- linear constraints. The design result is discussed.

Reverse Design and Test of Non-circular Gear & Crank-Rocker & Gear Trains Weft Insertion Mechanism

For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this weft insertion mechanism was given, and the reverse solution models of this mechanism were established. A reverse design and simulation software was compiled based on Visual Basic 6.0 to obtain the mechanism parameters, including the pitch curves and tooth profiles of the non-circular gears. A test-bed of this mechanism was developed according to these parameters. The kinematic performance of this weft insertion mechanism was tested by high-speed video tape recorder with its corresponding video analytical software Blaster's MAS. And the test results were identical with the theoretical calculation. Compared with the conjugate cam weft insertion mechanism which is applied on TT96 rapier loom, under the condition of same weft insertion rate, the variation of acceleration of this mechanism is smaller. This novel weft insertion mechanism can meet the requirements of weft insertion on rapier looms with smooth and steady motion.

Reverse Solution and Parametric Design of the Conjugate Cam Weft Insertion Mechanism Based on VB.NET and UG

In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.

Simulation and Analysis of Spatial Weft Insertion Mechanism Considering Flexibility and Clearance

A 3D model of the spatial four-bar weft insertion mechanism was built with unigraphics NX(UG) according to the actual requirement,and dynamics simulation was carried out by importing the model into ADAMS.Without considering the clearance,the motion characteristic curve of the sword belt was generated through ADAMS combined with MATLAB.In this paper the hinge between the rod and the sector gear was selected as an example with different values of clearance,outputting the motion characteristic curve of the sword belt.Finite element analysis(FEA)was conducted,the flexible body was generated by importing the forked frame into ANSYS,and flexible dynamics simulation was carried out by importing the flexible body into ADAMS to replace the rigid rod.A comprehensive comparison of the output characteristics of the sword belt was conducted in the consideration of the clearance or flexible.Analysis of the force on the left hinge of the rod was carried out with the ADAMS post processing module.With the same clearance,considering the flexibility,amplitude of fluctuation of the force on the hinge increased obviously.

Dynamic Modeling of Variable Stiffness and Damping for Spatial Linkage Weft Insertion Mechanism with Clearance

In order to further analyze the influence of clearance on the kinematic performance of spatial linkage weft insertion mechanism,it is necessary to study the dynamic characteristics of contact impact force model with the variable stiffness and damping coefficient.Firstly,the parameters in the output process of the system are solved by describing of the flexible joint clearance.Then,based on Lankarani-Nikravesh contact force model,the contact impact stiffness and damping coefficient is modified from fixed values to time-varying coefficients.The dynamic model of spatial linkage weft insertion mechanism with modified clearance is established by Lagrange method,and the dynamic characteristics of the system are calculated.The results show that the joint clearance can directly affect the output performance of the mechanism.With the increase of the clearance value,the curve fluctuations of acceleration,driving torque and collision force are obvious,and it will be further intensified with the increase of spindle speed,which greatly affects the stability of mechanism and fabric quality.Finally,the virtual prototype is established by the SolidWorks software and simulated by the ADAMS software.The simulation results are compared with the numerical results,which verifies the accuracy of the modeling method in this paper.

The Propulsive Force of the Water-jet to the Flying Weft in Water-jet Looms

In order to study the propulsive force on the water-jet to the flying weft in water-jet looms, a dynamic model has been established. Based on the analysis and example testing, an experiential formula of the propulsive force of the water-jet to the flying weft is obtained for the first time. The formula will profit the further research of the water-jet weft insertion and the production of textile.

Air Velocity Fluctuation in Reed Groove of Air-Jet Loom

The airflow in the reed groove of the air jet loom for the weft insertion includes the jet stream from the relay nozzle, the back leak stream from the reed, and the diffusion stream from the open side. The air velocity in the reed groove can be measured to analyze the influence of process parameters during the weft insertion. The relation between the air velocity and the relay nozzle distance, the jet angle or the supply pressure of the relay nozzle can be studied. In this paper, the pitot tube is applied to measure the air velocity in reed groove by the instrument designed. And the results indicate that the air velocity fluctuation in the reed groove is strong, and can drop from 150 m·s-1 to 80 m·s-1 drastically.