Nihility material is a medium whose relative permittivity and permeability tend to zero simultaneously. In this work, comparing with the scattering properties of perfect nihility nanoparticles （made from nihility mat...Nihility material is a medium whose relative permittivity and permeability tend to zero simultaneously. In this work, comparing with the scattering properties of perfect nihility nanoparticles （made from nihility material）, we provide an optimization design of electromagnetic nihility nanoparticles, which is a coated hybrid nanosphere constituted by commutative c-negative （ENG） and μ-negative （MNG） media. Compared to a single ENG or MNG nanosphere, it is found that the total and back scattering spectra of coated hybrid nanospheres are much closer to those of perfect nihility nanospheres. Moreover, it is observed that the scattered electromagnetic field distribution of coated hybrid nanospheres is identical to that of perfect nihility nanospheres. These results indicate that the combination of commutative ENG and MNG media can constitute a composite structure which gives the closest approximation of electromagnetic scattering of perfect nihility nanospheres in a wide frequency range.展开更多
This paper presents a comprehensive review of recent advances in reconfigurable electromagnetic(EM)surfaces.The discussion is organized around three key aspects of reconfigurable EM surfaces:unit cell engineering desi...This paper presents a comprehensive review of recent advances in reconfigurable electromagnetic(EM)surfaces.The discussion is organized around three key aspects of reconfigurable EM surfaces:unit cell engineering design,full-wave numerical analysis,and large-scale optimization techniques.Numerous references are provided to facilitate further exploration of this compelling and timely subject.To address the above three key aspects,we conduct an extensive examination of the design process for metasurfaces in reconfigurable devices.This involves evaluating the design methodology of unit cells,EM simulation techniques tailored for highly complex structures,and innovative optimization methods suitable for scenarios with numerous variables.In scenarios featuring reconfigurability for real-time manipulation of EM waves to meet the requirements of emerging communication environments,the optimization cost function is defined with multiple variables,exhibiting intricate behavior in the design space.Consequently,it necessitates an optimization methodology capable of handling high-dimensional functions without getting trapped in local minima.Moreover,the intricate geometries of metasurface devices preclude analytical solutions,necessitating high-performance full-wave solvers capable of providing highly accurate simulations with minimal computational expense.Key concepts and details pertaining to the aforementioned design stages are presented in a unified manner,along with representative examples.展开更多
Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electro...Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electromagnetic actuation(EMA) systems consisting of a variety of coil pairs. However, a unified method to design and optimize a coil pair according to technical specifications still does not exist. Initially, this paper presented the modeling of an untethered ferromagnetic particle actuated by externally applied magnetic field. Based on the models, a simple method of designing and optimizing the EMA coil pair according to technical specifications, was proposed. A loop-shaped coil pair generating uniform magnetic and gradient fields was chosen to demonstrate this method clearly and practically. The results of the optimization showed that the best distance to radius ratio of a loop-shaped coil pair is 1.02 for a uniform magnetic field and 1.75 for a uniform gradient field. The applicability of the method to other shapes of coil configuration was also illustrated. The best width to distance ratio for a square-shaped coil pair is 0.558 and 0.958 for uniform magnetic and gradient fields, respectively. The best height to width ratio and distance to width ratio for a rectangle-shaped coil pair is h/w =[0.9,1.1], d/w =[0.5,0.6] for uniform magnetic field and h/w =[1.0,1.2], d/w =[0.9,1.1] for uniform gradient field. Furthermore, simulations of a microparticle tracking the targeted trajectory were conducted to analyze the performance of the newly designed coils. The simulations suggested the ability of manipulating microparticles via the coils designed by our proposed method. The research mainly proposed a unified design and optimization method for a coil pair, which can support researchers while designing a specific coil pair according to the technical requirements. This study is aimed at researchers who are interested in EMA system and microrobots.展开更多
Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. ...Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. the basic parameters of the generator, the geometry dimensions of the stator and rotor, type and sizes of the slots, coils and windings parameters and the way of windings connection are determined. The finite element model of electromagnetic systems of generator stator and rotor was constructed by Ansoft Maxwe112D3D 12.1, and the transient electromagnetic characteristics of generator was analyzed and simulated. The 3D geometric models of turbo-generator were established respectively by using PROE software, and the dynamic finite element model of generator structure was built by ANSYS workbench 11.0. In addition, the dynamic characteristics of stator iron core, stator frame were calculated respectively. The simulation calculation has shown that the structural parameters, material parameters, and the electromagnetic characteristics parameters for large turbogenerator that are put forward by this paper should be optimal. and the design plan and method suggested by this paper should be feasible. The paper provides an effective solution for the development of larger turbo-generator than 1000 MW.展开更多
An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design, optimization design, dynamic and static characterist...An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design, optimization design, dynamic and static characteristics, and visual simulation. All empirical parameters and curves used in design process are stored in database. Through human-computer interactions, an electromagnetic system can be designed conveniently with the results and characteristics curves displayed in graphic model. Using this system can greatly shorten the process of product design, and the results satisfy technical requirements.展开更多
Electromagnetic forming is one of the high-rate forming methods that can be extensively used to form and join axisymmetric metal sheet and tube. Tendency of homogeneous radial deformation during electromagnetic compre...Electromagnetic forming is one of the high-rate forming methods that can be extensively used to form and join axisymmetric metal sheet and tube. Tendency of homogeneous radial deformation during electromagnetic compression of aluminium tube was investigated through the design optimization method based on sequential coupling numerical simulation and experiments. The results show that the tendency depends on the length ratio of tube to coil (R), which has a critical value (Rc) corresponding to the relatively homogeneous radial deformation along axial direction. The tube length relative to Rc is insensitive to the discharge voltage. When R is greater than Rc, the deformed tube presents horn shape and the shorter coil makes for local deformation. If R is less than Rc, the deformed tube presents drum shape and the longer coil contributes to larger deformation at tube end. Rc increases with coli length and could approach to 1; inversely, it could approach to 0. These results indicate the design optimization method based on the sequential coupling numerical simulation is feasible, which can be used to realize the controllable and precise deformation of metal tube.展开更多
Hermetically Sealed Electromagnetic Relay(HSER), used in aviation and aerospace,demands high reliability due to its critical applications. Given its complex operating conditions, efficient thermal analysis is essentia...Hermetically Sealed Electromagnetic Relay(HSER), used in aviation and aerospace,demands high reliability due to its critical applications. Given its complex operating conditions, efficient thermal analysis is essential for optimizing reliability. The commonly used Finite Element Method(FEM) is often time-consuming and may not be efficient or adaptable for complex multi-dimensional system calculations and design processes. This paper introduces an analysis method for thermal networks based on matrix perspective technology, encompassing matrix transformation, backpropagation of the heat path model, temperature rise calculation, solution comparison, and product implementation. Using the similarity theory of heat circuits, a basic thermal unit is established. Based on the fundamental connection between key components, a thermal network for a typical HSER is designed. An experimental system is set up, and the thermal network model's accuracy is confirmed using test data. Employing the topology analysis method, the topology of the thermal network is analyzed under both coil-energized and de-energized states. Potential thermal paths are identified, leading to optimized solutions for the HSER. Utilizing these solutions, the thermal path matrix topology model is backpropagated to the thermal path for temperature rise calculations. When compared to prototype HSER test data, the efficiency and accuracy of this matrix topology-based analysis method are confirmed.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174222 and 91230203
文摘Nihility material is a medium whose relative permittivity and permeability tend to zero simultaneously. In this work, comparing with the scattering properties of perfect nihility nanoparticles （made from nihility material）, we provide an optimization design of electromagnetic nihility nanoparticles, which is a coated hybrid nanosphere constituted by commutative c-negative （ENG） and μ-negative （MNG） media. Compared to a single ENG or MNG nanosphere, it is found that the total and back scattering spectra of coated hybrid nanospheres are much closer to those of perfect nihility nanospheres. Moreover, it is observed that the scattered electromagnetic field distribution of coated hybrid nanospheres is identical to that of perfect nihility nanospheres. These results indicate that the combination of commutative ENG and MNG media can constitute a composite structure which gives the closest approximation of electromagnetic scattering of perfect nihility nanospheres in a wide frequency range.
文摘This paper presents a comprehensive review of recent advances in reconfigurable electromagnetic(EM)surfaces.The discussion is organized around three key aspects of reconfigurable EM surfaces:unit cell engineering design,full-wave numerical analysis,and large-scale optimization techniques.Numerous references are provided to facilitate further exploration of this compelling and timely subject.To address the above three key aspects,we conduct an extensive examination of the design process for metasurfaces in reconfigurable devices.This involves evaluating the design methodology of unit cells,EM simulation techniques tailored for highly complex structures,and innovative optimization methods suitable for scenarios with numerous variables.In scenarios featuring reconfigurability for real-time manipulation of EM waves to meet the requirements of emerging communication environments,the optimization cost function is defined with multiple variables,exhibiting intricate behavior in the design space.Consequently,it necessitates an optimization methodology capable of handling high-dimensional functions without getting trapped in local minima.Moreover,the intricate geometries of metasurface devices preclude analytical solutions,necessitating high-performance full-wave solvers capable of providing highly accurate simulations with minimal computational expense.Key concepts and details pertaining to the aforementioned design stages are presented in a unified manner,along with representative examples.
基金Supported by Aerospace Research Project(Grant No.040102)
文摘Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of electromagnetic actuation(EMA) systems consisting of a variety of coil pairs. However, a unified method to design and optimize a coil pair according to technical specifications still does not exist. Initially, this paper presented the modeling of an untethered ferromagnetic particle actuated by externally applied magnetic field. Based on the models, a simple method of designing and optimizing the EMA coil pair according to technical specifications, was proposed. A loop-shaped coil pair generating uniform magnetic and gradient fields was chosen to demonstrate this method clearly and practically. The results of the optimization showed that the best distance to radius ratio of a loop-shaped coil pair is 1.02 for a uniform magnetic field and 1.75 for a uniform gradient field. The applicability of the method to other shapes of coil configuration was also illustrated. The best width to distance ratio for a square-shaped coil pair is 0.558 and 0.958 for uniform magnetic and gradient fields, respectively. The best height to width ratio and distance to width ratio for a rectangle-shaped coil pair is h/w =[0.9,1.1], d/w =[0.5,0.6] for uniform magnetic field and h/w =[1.0,1.2], d/w =[0.9,1.1] for uniform gradient field. Furthermore, simulations of a microparticle tracking the targeted trajectory were conducted to analyze the performance of the newly designed coils. The simulations suggested the ability of manipulating microparticles via the coils designed by our proposed method. The research mainly proposed a unified design and optimization method for a coil pair, which can support researchers while designing a specific coil pair according to the technical requirements. This study is aimed at researchers who are interested in EMA system and microrobots.
文摘Through a great deal calculation, the design and simulation analysis of stator parametric and rotor electromagnetic system of 1000MW turbo-generator are performed by using Ansoft Maxwell Rmxprt12.1 software. Besides. the basic parameters of the generator, the geometry dimensions of the stator and rotor, type and sizes of the slots, coils and windings parameters and the way of windings connection are determined. The finite element model of electromagnetic systems of generator stator and rotor was constructed by Ansoft Maxwe112D3D 12.1, and the transient electromagnetic characteristics of generator was analyzed and simulated. The 3D geometric models of turbo-generator were established respectively by using PROE software, and the dynamic finite element model of generator structure was built by ANSYS workbench 11.0. In addition, the dynamic characteristics of stator iron core, stator frame were calculated respectively. The simulation calculation has shown that the structural parameters, material parameters, and the electromagnetic characteristics parameters for large turbogenerator that are put forward by this paper should be optimal. and the design plan and method suggested by this paper should be feasible. The paper provides an effective solution for the development of larger turbo-generator than 1000 MW.
文摘An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design, optimization design, dynamic and static characteristics, and visual simulation. All empirical parameters and curves used in design process are stored in database. Through human-computer interactions, an electromagnetic system can be designed conveniently with the results and characteristics curves displayed in graphic model. Using this system can greatly shorten the process of product design, and the results satisfy technical requirements.
基金Projects(50575052, 50805036) supported by the National Natural Science Foundation of China
文摘Electromagnetic forming is one of the high-rate forming methods that can be extensively used to form and join axisymmetric metal sheet and tube. Tendency of homogeneous radial deformation during electromagnetic compression of aluminium tube was investigated through the design optimization method based on sequential coupling numerical simulation and experiments. The results show that the tendency depends on the length ratio of tube to coil (R), which has a critical value (Rc) corresponding to the relatively homogeneous radial deformation along axial direction. The tube length relative to Rc is insensitive to the discharge voltage. When R is greater than Rc, the deformed tube presents horn shape and the shorter coil makes for local deformation. If R is less than Rc, the deformed tube presents drum shape and the longer coil contributes to larger deformation at tube end. Rc increases with coli length and could approach to 1; inversely, it could approach to 0. These results indicate the design optimization method based on the sequential coupling numerical simulation is feasible, which can be used to realize the controllable and precise deformation of metal tube.
基金supported by the National Natural Science Foundation of China (No. 52177134)。
文摘Hermetically Sealed Electromagnetic Relay(HSER), used in aviation and aerospace,demands high reliability due to its critical applications. Given its complex operating conditions, efficient thermal analysis is essential for optimizing reliability. The commonly used Finite Element Method(FEM) is often time-consuming and may not be efficient or adaptable for complex multi-dimensional system calculations and design processes. This paper introduces an analysis method for thermal networks based on matrix perspective technology, encompassing matrix transformation, backpropagation of the heat path model, temperature rise calculation, solution comparison, and product implementation. Using the similarity theory of heat circuits, a basic thermal unit is established. Based on the fundamental connection between key components, a thermal network for a typical HSER is designed. An experimental system is set up, and the thermal network model's accuracy is confirmed using test data. Employing the topology analysis method, the topology of the thermal network is analyzed under both coil-energized and de-energized states. Potential thermal paths are identified, leading to optimized solutions for the HSER. Utilizing these solutions, the thermal path matrix topology model is backpropagated to the thermal path for temperature rise calculations. When compared to prototype HSER test data, the efficiency and accuracy of this matrix topology-based analysis method are confirmed.
