Evidence theory has been widely used in the information fusion for its effectiveness of the uncertainty reasoning. However, the classical DS evidence theory involves counter-intuitive behaviors when the high conflict ...Evidence theory has been widely used in the information fusion for its effectiveness of the uncertainty reasoning. However, the classical DS evidence theory involves counter-intuitive behaviors when the high conflict information exists. Based on the analysis of some modified methods, Assigning the weighting factors according to the intrinsic characteristics of the existing evidence sources is proposed, which is determined on the evidence distance theory. From the numerical examples, the proposed method provides a reasonable result with good convergence efficiency. In addition, the new rule retrieves to the Yager's formula when all the evidence sources contradict to each other completely.展开更多
The four-level active neutral point clamped(ANPC)inverter has become increasingly widely used in the renewable energy indus-try since it offers one more voltage level without increasing the total number of active swit...The four-level active neutral point clamped(ANPC)inverter has become increasingly widely used in the renewable energy indus-try since it offers one more voltage level without increasing the total number of active switches compared to the three-level ANPC inverter.The model predictive current control(MPCC)is a promising control method for multi-level inverters.However,the conven-tional MPCC suffers from high computational complexity and tedious weighting factor tuning in multi-level inverter applications.A low-complexity MPCC without weighting factors for a four-level ANPC inverter is proposed in this paper.The computational burden and voltage vector candidate set are reduced according to the relationship between voltage vector and neutral point voltage balance.The proposed MPCC shows excellent steady-state and dynamics performances while ensuring the neutral point voltage balancing.The efficacy of the proposed MPCC is verified by simulation and experimental results.展开更多
In variational problem, the selection of functional weighting factors (FWF) is one of the key points for discussing many relevant studies. To overcome arbitrariness and subjectivity of the empirical selecting methods ...In variational problem, the selection of functional weighting factors (FWF) is one of the key points for discussing many relevant studies. To overcome arbitrariness and subjectivity of the empirical selecting methods used widely at present, this paper tries to put forward an optimal objective selecting method of FWF. The focus of the study is on the weighting factors optimal selection in the variation retrieval single-Doppler radar wind field with the simple adjoint models. Weighting factors in the meaning of minimal variance are calculated out with the matrix theory and the finite difference method of partial differential equation. Experiments show that the result is more objective comparing with the factors obtained with the empirical method.展开更多
Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is ...Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is used as the reference case, and then the weight function for a thick-walled cylinder containing a radial edge crack can be worked out. Secondly, the dynamic stresses in uncracked thick-walled cylinders are solved under internal impulsive pressure by using mode shape function method. The solution consists of a quasi-static solution satisfying inhomogeneous boundary conditions and a dynamic solution satisfying homogeneous boundary condi- tions, and the history and distribution of dynamic stresses in thick-walled cylinders are derived in terms of Fourier-Bessel series. Finally, the dynamic stress intensity factor equations for thick-walled cylinder containing a radial edge crack sub- jected to internal impulsive pressure are given by dynamic weight function method. The finite element method is utilized to verify the results of numerical examples, showing the validity and feasibility of the proposed method.展开更多
Low birth weight(LBW) and preterm birth(PB) are associated with newborn mortality and diseases in adulthood.We explored factors related to LBW and PB by conducting a population-based case-control study from Januar...Low birth weight(LBW) and preterm birth(PB) are associated with newborn mortality and diseases in adulthood.We explored factors related to LBW and PB by conducting a population-based case-control study from January 2011 to December 2013 in Wuhan,China.A total of 337 LBW newborn babies,472 PB babies,and 708 babies with normal birth weights and born from term pregnancies were included in this study.Information of newborns and their parents was collected by trained investigators using questionnaires and referring to medical records.Univariate and logistic regression analyses with the stepwise selection method were used to determine the associations of related factors with LBW and PB.Results showed that maternal hypertension(OR=6.78,95% CI:2.27–20.29,P=0.001),maternal high-risk pregnancy(OR=1.53,95% CI:1.06–2.21,P=0.022),and maternal fruit intake ≥300 g per day during the first trimester(OR=1.70,95% CI:1.17–2.45,P=0.005) were associated with LBW.BMI ≥24 kg/m^2 of mother prior to delivery(OR=0.48,95% CI:0.32–0.74,P=0.001) and gestation ≥37 weeks(OR=0.01,95% CI:0.00–0.02,P〈0.034) were protective factors for LBW.Maternal hypertension(OR=3.36,95% CI:1.26–8.98,P=0.016),maternal high-risk pregnancy(OR=4.38,95% CI:3.26–5.88,P〈0.001),maternal meal intake of only twice per day(OR=1.88,95% CI:1.10–3.20,P=0.021),and mother liking food with lots of aginomoto and salt(OR=1.60,95% CI:1.02–2.51,P=0.040) were risk factors for PB.BMI ≥24 kg/m^2 of mother prior to delivery(OR=0.66,95% CI:0.47–0.93,P=0.018),distance of house from road ≥36 meters(OR=0.72,95% CI:0.53– 0.97,P=0.028),and living in rural area(OR= 0.60,95% CI:0.37–0.99,P=0.047) were protective factors for PB.Our study demonstrated some risk factors and protective factors for LBW and PB,and provided valuable information for the prevention of the conditions among newborns.展开更多
There are lots of low wavenumber noises in the gradients of time domain full waveform inversion(FWI),which can seriously reduce the accuracy and convergence speed of FWI.Thus,we introduce an angle-dependent weighting ...There are lots of low wavenumber noises in the gradients of time domain full waveform inversion(FWI),which can seriously reduce the accuracy and convergence speed of FWI.Thus,we introduce an angle-dependent weighting factor to precondition the gradients so as to suppress the low wavenumber noises when the multi-scale FWI is implemented in the high frequency.Model experiments show that the FWI based on the gradient preconditioning with an angle-dependent weighting factor has faster convergence speed and higher inversion accuracy than the conventional FWI.The tests on real marine seismic data show that this method can adapt to the FWI of field data,and provide high-precision velocity models for the actual data processing.展开更多
Yaw control system plays an important role in helping large-scale horizontal wind turbines capture the wind energy.To track the stochastic and fast-changing wind direction,the nacelle is rotated by the yaw control sys...Yaw control system plays an important role in helping large-scale horizontal wind turbines capture the wind energy.To track the stochastic and fast-changing wind direction,the nacelle is rotated by the yaw control system.Therein,a difficulty consists in the variation speed of the wind direction much faster than the rotation speed of the nacelle.To deal with this difficulty,model predictive control has been recently proposed in the literature,in which the previewed wind direction is employed into the predictive model,and the estimated captured energy and yaw actuator usage are two contradictive objectives.Since the performance of the model predictive control strat-egy relies largely on the weighting factor that is designed to balance the two objectives,the weighting factor should be carefully selected.In this study,a fuzzy-deduced scheme is proposed to derive the weighting factor of the mod-el predictive yaw control.For the proposed fuzzy-deduced strategy,the variation degree and the increment of the wind direction during the predictive horizon are used as the inputs,and the weighting factor is the output,which is dynamically adjusted.The proposed model predictive yaw control is demonstrated by some simulations using real wind data and its performance is compared with the conventional model predictive control with thefixed weighting factor.Comparison results confirm the outweighing performance of the proposed control strategy over the conventional one.展开更多
Objectives To observe the influence of weight loss induced by orlistat on several cardiovascular diseases risk factors in obese Chinese subjects. Methods Sixty obese Chinese patients participated in a 24 week clinical...Objectives To observe the influence of weight loss induced by orlistat on several cardiovascular diseases risk factors in obese Chinese subjects. Methods Sixty obese Chinese patients participated in a 24 week clinical trial. Participants were prescribed a slightly hypocaloric diet and exercise, then they were randomly assigned double -blind treatment with either orlistat 120 mg three times a day or placebo. Their body weight, blood pressure, fasting glucose, insulin, HbA1c, and serum lipid profile were performed before and after the weight loss intervention. Results After 24 weeks, orlistat -treated group lost more of their body weight than placebo group (6. 66 ± 0. 52 kg, 8. 44±4.08% and 1. 98 ± 0. 44 kg, 2. 44±1. 74 % , respectively, P < 0. 05) . Moreover, after treatment, orlistat - treated patients showed significant decreases in serum levels of total cholesterol, low density lipoprotein - cholesterol and high density lipoprotein - cholesterol ( P < 0.01), but in placebo group we found no change. Both systolic blood pressure and diastolic blood pressure fell significantly in orlistat - treated group. Fasting glucose and HOMA - IR in orlistat - treated group was distinctly reduced if compared with placebo group. Conclusions Weight loss resulting from orlistat treatment and slightly hypocaloric diet has produced favorable effects on several cardiovascular risk factors in obese Chinese subjects.展开更多
The Bald Eagle Search algorithm(BES)is an emerging meta-heuristic algorithm.The algorithm simulates the hunting behavior of eagles,and obtains an optimal solution through three stages,namely selection stage,search sta...The Bald Eagle Search algorithm(BES)is an emerging meta-heuristic algorithm.The algorithm simulates the hunting behavior of eagles,and obtains an optimal solution through three stages,namely selection stage,search stage and swooping stage.However,BES tends to drop-in local optimization and the maximum value of search space needs to be improved.To fill this research gap,we propose an improved bald eagle algorithm(CABES)that integrates Cauchy mutation and adaptive optimization to improve the performance of BES from local optima.Firstly,CABES introduces the Cauchy mutation strategy to adjust the step size of the selection stage,to select a better search range.Secondly,in the search stage,CABES updates the search position update formula by an adaptive weight factor to further promote the local optimization capability of BES.To verify the performance of CABES,the benchmark function of CEC2017 is used to simulate the algorithm.The findings of the tests are compared to those of the Particle Swarm Optimization algorithm(PSO),Whale Optimization Algorithm(WOA)and Archimedes Algorithm(AOA).The experimental results show that CABES can provide good exploration and development capabilities,and it has strong competitiveness in testing algorithms.Finally,CABES is applied to four constrained engineering problems and a groundwater engineeringmodel,which further verifies the effectiveness and efficiency of CABES in practical engineering problems.展开更多
Community-acquired pneumonia(CAP)is considered a sort of pneumonia developed outside hospitals and clinics.To diagnose community-acquired pneumonia(CAP)more efficiently,we proposed a novel neural network model.We intr...Community-acquired pneumonia(CAP)is considered a sort of pneumonia developed outside hospitals and clinics.To diagnose community-acquired pneumonia(CAP)more efficiently,we proposed a novel neural network model.We introduce the 2-dimensional wavelet entropy(2d-WE)layer and an adaptive chaotic particle swarm optimization(ACP)algorithm to train the feed-forward neural network.The ACP uses adaptive inertia weight factor(AIWF)and Rossler attractor(RA)to improve the performance of standard particle swarm optimization.The final combined model is named WE-layer ACP-based network(WACPN),which attains a sensitivity of 91.87±1.37%,a specificity of 90.70±1.19%,a precision of 91.01±1.12%,an accuracy of 91.29±1.09%,F1 score of 91.43±1.09%,an MCC of 82.59±2.19%,and an FMI of 91.44±1.09%.The AUC of this WACPN model is 0.9577.We find that the maximum deposition level chosen as four can obtain the best result.Experiments demonstrate the effectiveness of both AIWF and RA.Finally,this proposed WACPN is efficient in diagnosing CAP and superior to six state-of-the-art models.Our model will be distributed to the cloud computing environment.展开更多
In the field of high-power electric drives, multiphase motors have the advantages of high power-density, excellent fault tolerance and control flexibility. But their decoupling control and modulation process are much ...In the field of high-power electric drives, multiphase motors have the advantages of high power-density, excellent fault tolerance and control flexibility. But their decoupling control and modulation process are much more complicated compared with three-phase motors due to the increased degree of freedom. Finite control set model predictive control can reduce the difficulties of controlling six-phase motors because it does not require modulation process. In this paper, a cascaded model predictive control strategy is proposed for the optimal control of high-power six-phase permanent magnet synchronous motors. Firstly, the current prediction model of torque and harmonic subspaces are established by decoupling the six-phase spatial variables. Secondly, a cascaded cost function with fault-tolerant capability is proposed to eliminate the weighting factor in the cost function. And finally, the proposed strategy is demonstrated through theoretical analysis and experiments. It is validated that the proposed method is able to maintain excellent steady-state control accuracy and fast dynamic response while significantly reduce the control complexity of the system. Besides, it can easily achieve fault-tolerant operation under open-phase fault.展开更多
The on-line diameter measurement of larger axis workpieces is hard to achieve high precision detection, because of the bad environment of locale, the problem to amend the measuring error by non-uniform temperature fie...The on-line diameter measurement of larger axis workpieces is hard to achieve high precision detection, because of the bad environment of locale, the problem to amend the measuring error by non-uniform temperature field, and the difficulty to collimate and locate by usual method. By improving the measurement accuracy of larger axis accessories, it is useful to raise axis and hole's industry produce level. Because of the influence of complex environment in locale and some influential factors which are hard excluded from the large diameter measurement with multi-rolling-wheels method, the measurement results may not support or even contradict each other. To the situation, this paper puts forward a mutual support deviation distinguish data fusion method, including mutual support deviation detection and weight data fusion. The mutual support deviation detection part can effectively remove or weaken the unexpected impact on the measurement results and the weight data fusion part can get more accurate estimate result to the detected data. So the method can further improve the reliability of measurement results and increase the accuracy of the measurement system. By using the weight data fusion based on the mutual support (DFMS) to the simulation and experiment data, both simulation results and experiment results show that the method can effectively distinguish the data influenced by unexpected impact and improve the stability and reliability of measurement results. The new provided mutual support deviation distinguish method can be used to single sensor measurement and multi-sensor measurement, and can be used as a reference in the data distinguish of other area. The DFMS is helpful to realize the diameter measurement expanded uncertainty in 5 ×10^-6D or even higher when the measured axis workpiece's diameter is 1-5 m ( 1 m ≤ D ≤5 m ).展开更多
Weighted factor is given to access eontrol policies to express the importanceof policy and its effect on access control decision. According to this weighted access controlframework, a trustworthiness model for aceess ...Weighted factor is given to access eontrol policies to express the importanceof policy and its effect on access control decision. According to this weighted access controlframework, a trustworthiness model for aceess request is also given. In this model, we give themeasure of trustworthiness factor to access request- by using some idea of uncertainty reasoning ofexpert system, present and prove the parallel propagation formula of request trustworthiness factoramong multiple policies, and get thefinal trustworthiness factor to decide whether authorizing. Inthis model, authorization decision is given according to the calculation of request trustworthinessfactor, which is more understandable, more suitable for real requirement and more powerfulforsecurity enhancement than traditional methods. Meanwhile the finer access control granularity isanother advantage.展开更多
In order to minimize the harmonic distortion rate of the current at the common coupling point,this paper proposes a coordinated allocation strategy of harmonic compensation capacity considering the performance of acti...In order to minimize the harmonic distortion rate of the current at the common coupling point,this paper proposes a coordinated allocation strategy of harmonic compensation capacity considering the performance of active power filters(APF).On the premise of proportional distribution of harmonic compensation capacity,the harmonic compensation rate of each APF is considered,and the harmonic current value of each APF to be compensated is obtained.At the same time,the communication topology is introduced.Each APF takes into account the compensation ability of other APFs.Finally,three APFs with different capacity and performance are configured at the harmonic source to suppress the same harmonic source,and the harmonic distortion rate is reduced to 1.73%.The simulation results show that the strategy can effectively improve the compensation capability of the multiple APF cascaded system to the power grid without increasing the installed capacity.展开更多
Fourier descriptors are used as features for 3-D aircraft classification and pose determination from a 2-D image recorded at an arbitrary viewing angle. By the feature ranking of Fourier descriptors, a classification ...Fourier descriptors are used as features for 3-D aircraft classification and pose determination from a 2-D image recorded at an arbitrary viewing angle. By the feature ranking of Fourier descriptors, a classification procedure based on the fast nearest neighbour rule is proposed to save the matching time of an unknown aircraft with a partial library search. The testing results of some typical examples indicate this method is generally applicable and efficient in 3-D aircraft recognition.展开更多
A weighted Koppelman-Leray-Norguet formula of (r, s) differential forms on a local q-concave wedge in a complex manifold is obtained. By constructing the new weighted kernels, the authors give a new weighted Koppelman...A weighted Koppelman-Leray-Norguet formula of (r, s) differential forms on a local q-concave wedge in a complex manifold is obtained. By constructing the new weighted kernels, the authors give a new weighted Koppelman-Leray-Norguet formula without boundary integral of (r, s) differential forms, which is different from the classical one. The new weighted formula is especially suitable for the case of the local g-concave wedge with a non-smooth boundary, so one can avoid complex estimates of boundary integrals and the density of integral may be not defined on the boundary but only in the domain. Moreover, the weighted integral formulas have much freedom in applications such as in the interpolation of functions.展开更多
Rate control is one of the key factors influencing the multi-view video transmission.However,there is not a rate control algorithm in the existing Joint Multi-view Video Coding Model.In this paper,an efficient rate co...Rate control is one of the key factors influencing the multi-view video transmission.However,there is not a rate control algorithm in the existing Joint Multi-view Video Coding Model.In this paper,an efficient rate control algorithm and a bit allocation strategy for multi-view video coding are proposed.In order to obtain the consistent view quality,a bit allocation model based on the Lagrange optimum algorithm is firstly proposed.Secondly,considering the encoding statistical characteristics of different view types,a view weighting factor is introduced,and it will help improve the precision of bit allocation among views.Compared with the fixed QP control strategy,experiment results show that the proposed algorithm can efficiently control the bit rate and obtain more consistent views,with video visual quality improved.展开更多
The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage toleranc...The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.展开更多
In this paper,a new proposal for the implementation of the well-known direct power control(DPC)technique in grid-connected photovoltaic(PV)systems is suggested.Normally,the DPC is executed using a look-up table proced...In this paper,a new proposal for the implementation of the well-known direct power control(DPC)technique in grid-connected photovoltaic(PV)systems is suggested.Normally,the DPC is executed using a look-up table procedure based on the error between the actual and reference values of the active and reactive power.Thus,the structure of the DPC is simple and results in a fast transient behavior of the inner current loop(injected currents).Therefore,in the current study,the DPC is reformulated using a dead-beat function.In this formulation,the reference voltage vector(RVV)is obtained in theα-βreference frame.Consequently,the switching states for the inverter can be obtained based on the sign of the components of the RVV.The suggested DPC is compared with the conventional one and other switching tables,which are intended for performance enhancement.Furthermore,an extended Kalman filter(EKF)is utilized to eliminate all grid-voltage sensors.Moreover,the switching frequency of the proposed technique is minimized without any need for weighting factors or cost function evaluation.The overall control technique is validated using a hardware-in-the-loop(HIL)experimental set-up and compared with other schemes under different operating conditions.展开更多
In power converter control,predictive control has several merits,such as simple concept and fast response.However,the necessity to use the weighting factor inside the cost function makes the control design complex in ...In power converter control,predictive control has several merits,such as simple concept and fast response.However,the necessity to use the weighting factor inside the cost function makes the control design complex in the case of regulating multivariables where the value of the weighting factor is obtained by a nontrivial process.Also,it primarily depends on the system parameters and operating points of the control system.This paper aims to enhance the model predictive algorithm of the singlestage topology of a quasi-Z Source Inverter(qZSI).The concept of a multi-objective optimization approach is used in addition to the sub-cost function definition to remove the weighting factors.By using the sub-cost function definition,the inductor current is pushed away from the main loop of the predictive algorithm.Thus,no weighting factor is needed to manage the priority of the inductor current.The other two control targets,which are the capacitor voltage and load currents,will be controlled by the multi-objective optimization approach without using any weighting factors.A detailed theoretical analysis of the proposed technique will be given and validated based on simulation results.展开更多
文摘Evidence theory has been widely used in the information fusion for its effectiveness of the uncertainty reasoning. However, the classical DS evidence theory involves counter-intuitive behaviors when the high conflict information exists. Based on the analysis of some modified methods, Assigning the weighting factors according to the intrinsic characteristics of the existing evidence sources is proposed, which is determined on the evidence distance theory. From the numerical examples, the proposed method provides a reasonable result with good convergence efficiency. In addition, the new rule retrieves to the Yager's formula when all the evidence sources contradict to each other completely.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB4201602)the National Natural Science Foundation of China(Grant No.52002409).
文摘The four-level active neutral point clamped(ANPC)inverter has become increasingly widely used in the renewable energy indus-try since it offers one more voltage level without increasing the total number of active switches compared to the three-level ANPC inverter.The model predictive current control(MPCC)is a promising control method for multi-level inverters.However,the conven-tional MPCC suffers from high computational complexity and tedious weighting factor tuning in multi-level inverter applications.A low-complexity MPCC without weighting factors for a four-level ANPC inverter is proposed in this paper.The computational burden and voltage vector candidate set are reduced according to the relationship between voltage vector and neutral point voltage balance.The proposed MPCC shows excellent steady-state and dynamics performances while ensuring the neutral point voltage balancing.The efficacy of the proposed MPCC is verified by simulation and experimental results.
文摘In variational problem, the selection of functional weighting factors (FWF) is one of the key points for discussing many relevant studies. To overcome arbitrariness and subjectivity of the empirical selecting methods used widely at present, this paper tries to put forward an optimal objective selecting method of FWF. The focus of the study is on the weighting factors optimal selection in the variation retrieval single-Doppler radar wind field with the simple adjoint models. Weighting factors in the meaning of minimal variance are calculated out with the matrix theory and the finite difference method of partial differential equation. Experiments show that the result is more objective comparing with the factors obtained with the empirical method.
基金supported by the China Aviation Industry Corporation I Program (ATPD-1104-02).
文摘Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is used as the reference case, and then the weight function for a thick-walled cylinder containing a radial edge crack can be worked out. Secondly, the dynamic stresses in uncracked thick-walled cylinders are solved under internal impulsive pressure by using mode shape function method. The solution consists of a quasi-static solution satisfying inhomogeneous boundary conditions and a dynamic solution satisfying homogeneous boundary condi- tions, and the history and distribution of dynamic stresses in thick-walled cylinders are derived in terms of Fourier-Bessel series. Finally, the dynamic stress intensity factor equations for thick-walled cylinder containing a radial edge crack sub- jected to internal impulsive pressure are given by dynamic weight function method. The finite element method is utilized to verify the results of numerical examples, showing the validity and feasibility of the proposed method.
基金supported by the National Natural Science Foundation of China(No.81573235)Health and Family Commission of Wuhan Municipality(No.WG15D20)Science and Technology Bureau of Wuhan Jiang-an District(No.2014111904)
文摘Low birth weight(LBW) and preterm birth(PB) are associated with newborn mortality and diseases in adulthood.We explored factors related to LBW and PB by conducting a population-based case-control study from January 2011 to December 2013 in Wuhan,China.A total of 337 LBW newborn babies,472 PB babies,and 708 babies with normal birth weights and born from term pregnancies were included in this study.Information of newborns and their parents was collected by trained investigators using questionnaires and referring to medical records.Univariate and logistic regression analyses with the stepwise selection method were used to determine the associations of related factors with LBW and PB.Results showed that maternal hypertension(OR=6.78,95% CI:2.27–20.29,P=0.001),maternal high-risk pregnancy(OR=1.53,95% CI:1.06–2.21,P=0.022),and maternal fruit intake ≥300 g per day during the first trimester(OR=1.70,95% CI:1.17–2.45,P=0.005) were associated with LBW.BMI ≥24 kg/m^2 of mother prior to delivery(OR=0.48,95% CI:0.32–0.74,P=0.001) and gestation ≥37 weeks(OR=0.01,95% CI:0.00–0.02,P〈0.034) were protective factors for LBW.Maternal hypertension(OR=3.36,95% CI:1.26–8.98,P=0.016),maternal high-risk pregnancy(OR=4.38,95% CI:3.26–5.88,P〈0.001),maternal meal intake of only twice per day(OR=1.88,95% CI:1.10–3.20,P=0.021),and mother liking food with lots of aginomoto and salt(OR=1.60,95% CI:1.02–2.51,P=0.040) were risk factors for PB.BMI ≥24 kg/m^2 of mother prior to delivery(OR=0.66,95% CI:0.47–0.93,P=0.018),distance of house from road ≥36 meters(OR=0.72,95% CI:0.53– 0.97,P=0.028),and living in rural area(OR= 0.60,95% CI:0.37–0.99,P=0.047) were protective factors for PB.Our study demonstrated some risk factors and protective factors for LBW and PB,and provided valuable information for the prevention of the conditions among newborns.
基金funded by the National Natural Science Foundation of China(No.42074138)the Wenhai Program of the S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(No.2021WHZZB0700)the Major Scientific and Technological Innovation Project of Shandong Province(No.2019JZZY010803).
文摘There are lots of low wavenumber noises in the gradients of time domain full waveform inversion(FWI),which can seriously reduce the accuracy and convergence speed of FWI.Thus,we introduce an angle-dependent weighting factor to precondition the gradients so as to suppress the low wavenumber noises when the multi-scale FWI is implemented in the high frequency.Model experiments show that the FWI based on the gradient preconditioning with an angle-dependent weighting factor has faster convergence speed and higher inversion accuracy than the conventional FWI.The tests on real marine seismic data show that this method can adapt to the FWI of field data,and provide high-precision velocity models for the actual data processing.
基金supported by the National Natural Science Foundation of China under Grant 61803393project supported by the Natural Science Foundation of Hunan Province(No.2020JJ4751)the Innovation-Driven Project of Central South University(No.2020CX031).
文摘Yaw control system plays an important role in helping large-scale horizontal wind turbines capture the wind energy.To track the stochastic and fast-changing wind direction,the nacelle is rotated by the yaw control system.Therein,a difficulty consists in the variation speed of the wind direction much faster than the rotation speed of the nacelle.To deal with this difficulty,model predictive control has been recently proposed in the literature,in which the previewed wind direction is employed into the predictive model,and the estimated captured energy and yaw actuator usage are two contradictive objectives.Since the performance of the model predictive control strat-egy relies largely on the weighting factor that is designed to balance the two objectives,the weighting factor should be carefully selected.In this study,a fuzzy-deduced scheme is proposed to derive the weighting factor of the mod-el predictive yaw control.For the proposed fuzzy-deduced strategy,the variation degree and the increment of the wind direction during the predictive horizon are used as the inputs,and the weighting factor is the output,which is dynamically adjusted.The proposed model predictive yaw control is demonstrated by some simulations using real wind data and its performance is compared with the conventional model predictive control with thefixed weighting factor.Comparison results confirm the outweighing performance of the proposed control strategy over the conventional one.
文摘Objectives To observe the influence of weight loss induced by orlistat on several cardiovascular diseases risk factors in obese Chinese subjects. Methods Sixty obese Chinese patients participated in a 24 week clinical trial. Participants were prescribed a slightly hypocaloric diet and exercise, then they were randomly assigned double -blind treatment with either orlistat 120 mg three times a day or placebo. Their body weight, blood pressure, fasting glucose, insulin, HbA1c, and serum lipid profile were performed before and after the weight loss intervention. Results After 24 weeks, orlistat -treated group lost more of their body weight than placebo group (6. 66 ± 0. 52 kg, 8. 44±4.08% and 1. 98 ± 0. 44 kg, 2. 44±1. 74 % , respectively, P < 0. 05) . Moreover, after treatment, orlistat - treated patients showed significant decreases in serum levels of total cholesterol, low density lipoprotein - cholesterol and high density lipoprotein - cholesterol ( P < 0.01), but in placebo group we found no change. Both systolic blood pressure and diastolic blood pressure fell significantly in orlistat - treated group. Fasting glucose and HOMA - IR in orlistat - treated group was distinctly reduced if compared with placebo group. Conclusions Weight loss resulting from orlistat treatment and slightly hypocaloric diet has produced favorable effects on several cardiovascular risk factors in obese Chinese subjects.
基金Project of Key Science and Technology of the Henan Province (No.202102310259)Henan Province University Scientific and Technological Innovation Team (No.18IRTSTHN009).
文摘The Bald Eagle Search algorithm(BES)is an emerging meta-heuristic algorithm.The algorithm simulates the hunting behavior of eagles,and obtains an optimal solution through three stages,namely selection stage,search stage and swooping stage.However,BES tends to drop-in local optimization and the maximum value of search space needs to be improved.To fill this research gap,we propose an improved bald eagle algorithm(CABES)that integrates Cauchy mutation and adaptive optimization to improve the performance of BES from local optima.Firstly,CABES introduces the Cauchy mutation strategy to adjust the step size of the selection stage,to select a better search range.Secondly,in the search stage,CABES updates the search position update formula by an adaptive weight factor to further promote the local optimization capability of BES.To verify the performance of CABES,the benchmark function of CEC2017 is used to simulate the algorithm.The findings of the tests are compared to those of the Particle Swarm Optimization algorithm(PSO),Whale Optimization Algorithm(WOA)and Archimedes Algorithm(AOA).The experimental results show that CABES can provide good exploration and development capabilities,and it has strong competitiveness in testing algorithms.Finally,CABES is applied to four constrained engineering problems and a groundwater engineeringmodel,which further verifies the effectiveness and efficiency of CABES in practical engineering problems.
基金This paper is partially supported by Medical Research Council Confidence in Concept Award,UK(MC_PC_17171)Royal Society International Exchanges Cost Share Award,UK(RP202G0230)+5 种基金British Heart Foundation Accelerator Award,UK(AA/18/3/34220)Hope Foundation for Cancer Research,UK(RM60G0680)Global Challenges Research Fund(GCRF),UK(P202PF11)Sino-UK Industrial Fund,UK(RP202G0289)LIAS Pioneering Partnerships award,UK(P202ED10)Data Science Enhancement Fund,UK(P202RE237).
文摘Community-acquired pneumonia(CAP)is considered a sort of pneumonia developed outside hospitals and clinics.To diagnose community-acquired pneumonia(CAP)more efficiently,we proposed a novel neural network model.We introduce the 2-dimensional wavelet entropy(2d-WE)layer and an adaptive chaotic particle swarm optimization(ACP)algorithm to train the feed-forward neural network.The ACP uses adaptive inertia weight factor(AIWF)and Rossler attractor(RA)to improve the performance of standard particle swarm optimization.The final combined model is named WE-layer ACP-based network(WACPN),which attains a sensitivity of 91.87±1.37%,a specificity of 90.70±1.19%,a precision of 91.01±1.12%,an accuracy of 91.29±1.09%,F1 score of 91.43±1.09%,an MCC of 82.59±2.19%,and an FMI of 91.44±1.09%.The AUC of this WACPN model is 0.9577.We find that the maximum deposition level chosen as four can obtain the best result.Experiments demonstrate the effectiveness of both AIWF and RA.Finally,this proposed WACPN is efficient in diagnosing CAP and superior to six state-of-the-art models.Our model will be distributed to the cloud computing environment.
文摘In the field of high-power electric drives, multiphase motors have the advantages of high power-density, excellent fault tolerance and control flexibility. But their decoupling control and modulation process are much more complicated compared with three-phase motors due to the increased degree of freedom. Finite control set model predictive control can reduce the difficulties of controlling six-phase motors because it does not require modulation process. In this paper, a cascaded model predictive control strategy is proposed for the optimal control of high-power six-phase permanent magnet synchronous motors. Firstly, the current prediction model of torque and harmonic subspaces are established by decoupling the six-phase spatial variables. Secondly, a cascaded cost function with fault-tolerant capability is proposed to eliminate the weighting factor in the cost function. And finally, the proposed strategy is demonstrated through theoretical analysis and experiments. It is validated that the proposed method is able to maintain excellent steady-state control accuracy and fast dynamic response while significantly reduce the control complexity of the system. Besides, it can easily achieve fault-tolerant operation under open-phase fault.
基金supported by Focus of the Funding Item of Metrology of Military Industry in National Defense of China in "Tenth-five-year" Project (Grant No. 60104208)
文摘The on-line diameter measurement of larger axis workpieces is hard to achieve high precision detection, because of the bad environment of locale, the problem to amend the measuring error by non-uniform temperature field, and the difficulty to collimate and locate by usual method. By improving the measurement accuracy of larger axis accessories, it is useful to raise axis and hole's industry produce level. Because of the influence of complex environment in locale and some influential factors which are hard excluded from the large diameter measurement with multi-rolling-wheels method, the measurement results may not support or even contradict each other. To the situation, this paper puts forward a mutual support deviation distinguish data fusion method, including mutual support deviation detection and weight data fusion. The mutual support deviation detection part can effectively remove or weaken the unexpected impact on the measurement results and the weight data fusion part can get more accurate estimate result to the detected data. So the method can further improve the reliability of measurement results and increase the accuracy of the measurement system. By using the weight data fusion based on the mutual support (DFMS) to the simulation and experiment data, both simulation results and experiment results show that the method can effectively distinguish the data influenced by unexpected impact and improve the stability and reliability of measurement results. The new provided mutual support deviation distinguish method can be used to single sensor measurement and multi-sensor measurement, and can be used as a reference in the data distinguish of other area. The DFMS is helpful to realize the diameter measurement expanded uncertainty in 5 ×10^-6D or even higher when the measured axis workpiece's diameter is 1-5 m ( 1 m ≤ D ≤5 m ).
文摘Weighted factor is given to access eontrol policies to express the importanceof policy and its effect on access control decision. According to this weighted access controlframework, a trustworthiness model for aceess request is also given. In this model, we give themeasure of trustworthiness factor to access request- by using some idea of uncertainty reasoning ofexpert system, present and prove the parallel propagation formula of request trustworthiness factoramong multiple policies, and get thefinal trustworthiness factor to decide whether authorizing. Inthis model, authorization decision is given according to the calculation of request trustworthinessfactor, which is more understandable, more suitable for real requirement and more powerfulforsecurity enhancement than traditional methods. Meanwhile the finer access control granularity isanother advantage.
基金This work was supported in part by the National Natural Science Foundation of China(Grant No.61863023).
文摘In order to minimize the harmonic distortion rate of the current at the common coupling point,this paper proposes a coordinated allocation strategy of harmonic compensation capacity considering the performance of active power filters(APF).On the premise of proportional distribution of harmonic compensation capacity,the harmonic compensation rate of each APF is considered,and the harmonic current value of each APF to be compensated is obtained.At the same time,the communication topology is introduced.Each APF takes into account the compensation ability of other APFs.Finally,three APFs with different capacity and performance are configured at the harmonic source to suppress the same harmonic source,and the harmonic distortion rate is reduced to 1.73%.The simulation results show that the strategy can effectively improve the compensation capability of the multiple APF cascaded system to the power grid without increasing the installed capacity.
文摘Fourier descriptors are used as features for 3-D aircraft classification and pose determination from a 2-D image recorded at an arbitrary viewing angle. By the feature ranking of Fourier descriptors, a classification procedure based on the fast nearest neighbour rule is proposed to save the matching time of an unknown aircraft with a partial library search. The testing results of some typical examples indicate this method is generally applicable and efficient in 3-D aircraft recognition.
基金National Natural Science Foundation and Mathematical "Tian Yuan" Foundation of China (10271097 and TY10126033)
文摘A weighted Koppelman-Leray-Norguet formula of (r, s) differential forms on a local q-concave wedge in a complex manifold is obtained. By constructing the new weighted kernels, the authors give a new weighted Koppelman-Leray-Norguet formula without boundary integral of (r, s) differential forms, which is different from the classical one. The new weighted formula is especially suitable for the case of the local g-concave wedge with a non-smooth boundary, so one can avoid complex estimates of boundary integrals and the density of integral may be not defined on the boundary but only in the domain. Moreover, the weighted integral formulas have much freedom in applications such as in the interpolation of functions.
基金supported by National Natural Science Foundation of China under Grants No. 61071166,No. 61001152 and No. 61071091
文摘Rate control is one of the key factors influencing the multi-view video transmission.However,there is not a rate control algorithm in the existing Joint Multi-view Video Coding Model.In this paper,an efficient rate control algorithm and a bit allocation strategy for multi-view video coding are proposed.In order to obtain the consistent view quality,a bit allocation model based on the Lagrange optimum algorithm is firstly proposed.Secondly,considering the encoding statistical characteristics of different view types,a view weighting factor is introduced,and it will help improve the precision of bit allocation among views.Compared with the fixed QP control strategy,experiment results show that the proposed algorithm can efficiently control the bit rate and obtain more consistent views,with video visual quality improved.
文摘The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.
文摘In this paper,a new proposal for the implementation of the well-known direct power control(DPC)technique in grid-connected photovoltaic(PV)systems is suggested.Normally,the DPC is executed using a look-up table procedure based on the error between the actual and reference values of the active and reactive power.Thus,the structure of the DPC is simple and results in a fast transient behavior of the inner current loop(injected currents).Therefore,in the current study,the DPC is reformulated using a dead-beat function.In this formulation,the reference voltage vector(RVV)is obtained in theα-βreference frame.Consequently,the switching states for the inverter can be obtained based on the sign of the components of the RVV.The suggested DPC is compared with the conventional one and other switching tables,which are intended for performance enhancement.Furthermore,an extended Kalman filter(EKF)is utilized to eliminate all grid-voltage sensors.Moreover,the switching frequency of the proposed technique is minimized without any need for weighting factors or cost function evaluation.The overall control technique is validated using a hardware-in-the-loop(HIL)experimental set-up and compared with other schemes under different operating conditions.
基金supported in part by the Estonian Research Council grant PUT1443in part by the Estonian Centre of Excellence in Zero Energy and Resource Efficient Smart Buildings and Districts,ZEBE,grant 2014-2020.4.01.15-0016 funded by the European Regional Development Fund.
文摘In power converter control,predictive control has several merits,such as simple concept and fast response.However,the necessity to use the weighting factor inside the cost function makes the control design complex in the case of regulating multivariables where the value of the weighting factor is obtained by a nontrivial process.Also,it primarily depends on the system parameters and operating points of the control system.This paper aims to enhance the model predictive algorithm of the singlestage topology of a quasi-Z Source Inverter(qZSI).The concept of a multi-objective optimization approach is used in addition to the sub-cost function definition to remove the weighting factors.By using the sub-cost function definition,the inductor current is pushed away from the main loop of the predictive algorithm.Thus,no weighting factor is needed to manage the priority of the inductor current.The other two control targets,which are the capacitor voltage and load currents,will be controlled by the multi-objective optimization approach without using any weighting factors.A detailed theoretical analysis of the proposed technique will be given and validated based on simulation results.