FLEXIBLE MAGNETIC WHEEL TYPE INTELLIGENT WELDING ROBOT FOR SPHERICAL TANK

An intelligent welding robot for spherical tank's all-position multi-layerwelds is developed. Based on the dynamics analyzing and simulation testing, a flexible magneticwheel mechanism is created as the robot's walking carriage. It makes the robot directly attracted tothe surface of the spherical tank so as to realize the all-position walking and welding withoutrail. At the same time, a CCD real-time tracing system is developed for the robot to repeatedlytrace the all-position and multi-layer seams. The welding tests show that the welding robot can makethe all-position and multi-layer welds with high tracing accuracy, excellent quality and reliablebehavior, and it can be applied for practical production.

Guiding the welding robot to the initial welding position with visual method

Using step pattern match technology with variational resolution can recognize the position and orientation of the weld seam in the image. According to using the image segmentation method based on pattern match, not only advanced the speed and anti-jamming capability, but also captured the edge information of the weld seam and the edge of the workpiece, and the image coordinate of the initial welding position can be obtained. The matrix for hand-eye relationship of the robot can be calculated by adopting the rapid calculation method. According to the depth calculating principle with the special point matching using binocular stereovision, the initial welding position can be confirmed by calculating the middle point of the perpendicular line of two radials in the space, and the function to guide the welding robot to the initial welding position can be realized.

Study on motion simulation of arc welding robot based on UG

The motion simulation of arc welding robot is the basis of the system of robot off-line programming, and it has been one of the important research directions. The UGNX 4. 0 is adopted to establish 3D simulating model of MOTOMAN-HP6 arc welding robot. The kinematic model under link-pole coordinate system is established by the second development function offered by UG/OPEN API and the method of programming using VC ＋＋ 6. 0. The methods of founding model and operational procedures are introduced, which provides a good basis for off-line programming technique under Unigraphies condition.

Inverse kinematics and welding experiments of the intersecting pipe welding robot

A robot used for multi-pass welding of the piping branch junctions and nozzle attachments to main pressure vessels is 4-DOF serial mechanism, two mobile joints and two rotary joints are adopted in design. The kinematic model was established with DH parameters, the inverse kinematics was solved. According to the forward and inverse kinematics equations, the robot kinematics was simulated in Matlab, the simulations indicate that the solution for inverse kinematics can satisfy the welding requirements well. As there are size errors, processing errors and welding deformation, the path of welding is forecasted according to the previous welding situation, and then, the path is taught at desired via-points, which plays an important role in submerged-arc welding. The submerged-arc welding experiments indicate that the robot and the welding methods are preferable to ensure welding quality.

An approach to measure the pose of RHJD4-1 arc welding robot for calibration

A measurement setup used for robot calibration was designed to meet the requirement of off line programming technique. The robot end effector pose (position and orientation) can be calculated indirectly by using this setup. The setup has been applied to RHJD4 1 arc welding robot. The experimental results show the method of pose measuring using the measurement setup is simple and reliable to finish pose measuring for robot calibration. In addition, the setup can measure the position repeatability of robot.

The Review of the Welding Robot’s Precision

Welding is an significant link in industrial production,and it is known as the"industrial tailor".However,welding fume,arc light,and metal spatter cause a harsh welding working environment,and the quality of welding has a decisive influence on product quality.Low production capacity,difficult recruitment,and low profits have become drawbacks for the development of the welding field.Combining traditional welding with robots can solve these drawbacks and increase the precision of welding.Welding robots are industrial robots engaged in welding and are mostly used in large-scale manufacturing fields such as automobile manufacturing.Welding robots are divided into spot welding robots,arc welding robots and laser welding robots.In addition,body accuracy and control accuracy are the two main factors that affect the robot welding accuracy.In this case,the sensing technology of welding robot is also essential.

Digital Twin Implementation of Autonomous Planning Arc Welding Robot System

Industrial robots are currently applied for ship sub-assembly welding to replace welding workers because of the intelligent production and cost savings.In order to improve the efficiency of the robot system,a digital twin system of welding path planning for the arc welding robot in ship sub-assembly welding is proposed in this manuscript to achieve autonomous planning and generation of the welding path.First,a five-dimensional digital twin model of the dual arc welding robot system is constructed.Then,the system kinematics analysis and calibration are studied for communication realization between the virtual and the actual system.Besides,a topology consisting of three bounding volume hierarchies(BVH)trees is proposed to construct digital twin virtual entities in this system.Based on this topology,algorithms for welding seam extraction and collision detection are presented.Finally,the genetic algorithm and the RRT-Connect algorithm combined with region partitioning(RRT-Connect-RP)are applied for the welding sequence global planning and local jump path planning,respectively.The digital twin system and its path planning application are tested in the actual application scenario.The results show that the system can not only simulate the actual welding operation of the arc welding robot but also realize path planning and real-time control of the robot.

Constant Speed Control for Complex Cross-section Welding Using Robot Based on Angle Self-Test

Expandable profile liner（EPL） is a promising new oil well casing cementing technique, and welding is a major EPLs connection technology. Connection of EPL is still in the stage of manual welding so far, automatic welding technology is a hotspot of EPL which is one of the key technologies to be solved. A robot for automatic welding of＂8＂ type EPL is studied. Four quadrants of mathematical equations of the 8-shaped cross-section track of EPL, consisting of multiple arcs, are established. Mechanism program for complex cross-section welding of EPL based on angle detection is proposed according to characteristics of small size, small valleys, and large forming errors, etc. A welding velocity vector control model is established by linkage control of a welding vehicle, a small driven actuator, and a height tracking mechanism. A constant speed control model based on an angle and symmetrical analysis model of rectangular coordinate system for EPL is built. Constraint conditions of constant speed control between each section are analyzed with 4 sections in first quadrant as an example, and cooperation work mechanism of the welding vehicle and the small tracking actuator is established based on pressure detection. The constant speed control model using angle self-test can be used to avoid the need for a precise mathematical model for tracking control and to adapt manufacture and installation deviation of EPL workpiece. The model is able to solve constant speed and trajectory tracking problems of EPL cross-section welding. EPL seams welded by the studied robot are good in appearance, and non-destructive testing（NDT） shows the seams are good in quality with no welding defects. Bulge tests show that the maximum pressure of welded EPL is 35 MPa, which can fulfill expansion performance requirements.

Control algorithm based on trajectory and orientation of oblique intersection line welding-cutting robot

Working principle for a four-axis oblique intersection line welding robot is analyzed. A mathematical model for welding torch orientation angle is established, and an interpolation algorithm based on time division is proposed. The algorithm makes all interpolation points fall on a required curve in theory with no accumulated errors and a direct interpolation control on the saddle-shaped curve trajectory and space orientation angle can be achieved. It is shown by MATLAB simulation that the algorithm is real-time and fully meets the precision requirement. The algorithm has been applied to real robots.

Optimal Posture Searching Algorithm on Mobile Welding Robot

An independently developed mobile welding robot system is introduced. Kinematics model is the base of robot planning. With the Denavit-Hartenberg method, robot kinematics equation can be gotten. The robot welding torch inclination angle consists of the working and moving angles. According to the kinematics model,both the two angles and torch position can be calculated. Under special moving angle, a two-step algorithm is used to obtain the optimal manipulator posture. The calculation result shows that the algorithm has high precision.

Dynamic and control system analysis of two-wheeled robot for welding application

Aiming at the welding condition of space complex seam is uncertain and the intelligence of welding robot is unideal, a two-wheeled mobile robot is developed. It not only has the capacity of autonomous decision and avoiding obstacles, but also can flexibly move and strongly adapt variable environment. The composition of the welding robot is described and the dynamic model is established. The feasible control strategy and control algorithm is put forward. The simulation experiments of real world are conducted, the results are satisfying.

A high-precision control system for robotic welding positioner

Aiming at the robotic welding positioner with characteristic of parameter change, load change, nonlinearity, and an intelligent control system was researched and developed. This control system used a two-mode controller that based on Fuzzy and PID control method. The results of simulation show that the dynamic and steady performances of the intelligent controller are better than that of single PID or Fuzzy controller. This paper has made a detail theoretical analysis of the constitution design and real-time controlled software and brought up the design and fulfillment method of multi-task real-time control software of high precisely and numerically controlled welding positioner, which has a good result in practice.

A measuring and correcting method about locus errors in robot welding

When tubules regularly arranged are welded onto a bobbin by robot, the position and orientation of some tubules may be changed by such factors as thermal deformations and positioning errors etc. Which make it very difficult to weld automatically and continuously by the method of teaching and playing. In this paper, a kind of error measuring system is presented. By which the position and orientation errors of tubules relative to the teaching one can be measured. And, a method to correct the locus errors is also proposed, by which the moving locus planned via teaching points can be corrected in real time according to measured error parameters. So that, just by teaching one, all tubules on a bobbin could be welded automatically.

ALGORITHM AND IMPLEMENTATION OF AUTO-SEARCHING WELD LINE FOR WELDING MOBILE ROBOT

An algorithm of auto-searching weld line for welding mobile robot is presented. Auto-searching weld line is that the robot can automatically recognize a weld groove according to the characteristics of the weld groove before welding, and then adjust itself posture to the desired status preparing for welding, namely, it is a process that the robot autonomously aligns itself to the center of welding seam. Firstly, the configuration of welding mobile robot with the function of auto-searching weld line is introduced, then the algorithm and implementation of auto-searching weld line are presented on the basis of kinematics model of the robot, at last trajectory planning among auto-searching weld line is investigated in detail. The experiment result shows that the developed welding mobile robot can successfully implement the task of auto-searching weld line before welding, tracking error precision can be controlled to approximate ±1.5 mm, and satisfy the requirement of practical welding project.

3D reconstruction of worn parts for flexible remanufacture based on robotic arc welding

3D reconstruction of worn parts is the foundation for remanufacturing system based on robotic arc welding, because it can provide 3D geometric information for robot task plan. In this investigation, a novel 3D reconstruction system based on linear structured light vision sensing is developed. This system hardware consists of a MTC368-CB CCD camera, a MLH-645 laser projector and a DH-CG300 image grabbing card. This system software is developed to control the image data capture. In order to reconstruct the 3D geometric information from the captured image, a two steps rapid calibration algorithm is proposed. The 3D reconstruction experiment shows a satisfactory result.

Seam Tracking and Visual Control for Robotic Arc Welding Based on Structured Light Stereovision

A real-time arc welding robot visual control system based on a local network with a multi-level hierarchy is developed in this paper. It consists of an intelligence and human-machine interface level, a motion planning level, a motion control level and a servo control level. The last three levels form a local real-time open robot controller, which realizes motion planning and motion control of a robot. A camera calibration method based on the relative movement of the end-effector connected to a robot is proposed and a method for tracking weld seam based on the structured light stereovision is provided. Combining the parameters of the cameras and laser plane, three groups of position values in Cartesian space are obtained for each feature point in a stripe projected on the weld seam. The accurate three-dimensional position of the edge points in the weld seam can be calculated from the obtained parameters with an information fusion algorithm. By calculating the weld seam parameter from position and image data, the movement parameters of the robot used for tracking can be determined. A swing welding experiment of type V groove weld is successfully conducted, the results of which show that the system has high resolution seam tracking in real-time, and works stably and efficiently.

Study on general inverse kinematics of rotating/tilting positioner for robotic arc welding off-line programming

Off line programming provides an essential link between CAD and CAM, whose development will result in greater use of robotic arc welding. An arc welding system with a robot and a rotating/tilting positioner is one of the most typical workcells. The inverse kinematics of robot and positioner is the foundation of the off line programming system. The previous researchers only focused on a special solution of the positioner inverse kinematics, which is the solution at down hand welding position. In this paper, we introduce a method for representing welding position. Then a general algorithm of rotating/tilting positioner inverse kinematics is presented, and an approach to find the unique solution of the inverse kinematics is discussed. The simulation experiment results show that the general algorithm can improve the ability of robotic arc welding off line programming system to program all types of welding positions.

Haptic and visual augmented reality interface for programming welding robots

It is a challenging task for operators to program a remote robot for welding manipulation depending only on the visual information from the remote site. This paper proposes an intuitive user interface for programming welding robots remotely using augmented reality （AR） with haptic feedback. The proposed system uses a depth camera to reconstruct the surfaces of workpieces. A haptic input device is used to allow users to define welding paths along these surfaces. An AR user interface is developed to allow users to visualize and adjust the orientation of the welding torch. Compared with the traditional robotic welding path programming methods which rely on prior CAD models or contact between the robot end-effector and the workpiece, this proposed approach allows for fast and intuitive remote robotic welding path programming with- out prior knowledge of CAD models of the workpieces. The experimental results show that the proposed approach is a user-friendly interface and can assist users in obtaining an accurate welding path.

Study on intelligent welding mobile robot with the function of auto-searching weld line

The development of welding robots suitable for specially unstructured working enviroments has been become an important development direction of industrial robot application because large-scale welding structures have been used more and more widely in modern industry. In this paper, an intelligent mobile robot for welding of ship deck with the function of autosearching weld line was presented. A wheeled motion mechanism and a cross adjustment slider are used for the welding robot body. A sensing system based on laser-PSD （position sensitive detector） displacement sensor was developed to obtain two dimensional deviation signals during seam tracking. A full-digital control system based on DSP and CPLD has also been realized to implement complex and high-performance control algorithms. Furthermore, the system has still the function of auto-searching weld line according to the characteristics information of weld groove and adjusting posture itself to the desired status preparing for welding. The experiment of auto-searching welding line shows that the robot has high tracing accuracy, and can satisfy the requirement of practical welding project.

A vision tracking system of robot CO_2 short transfer welding

This paper expounds the necessity of applying real-time control in vision sensing and tracking system of welding robot and analyses the difficulty of welding image processing. Through experiments, a practical robot CO2 arc adaptive feedback tracking system is established. According to the analysing of current and voltage signals between welding torch and base metal, the image freezing time for TMS-32020 processor is determined, and the defect of dark image and serious splashes in CO, welding image are avoided. Thus welding image becomes clear, and digitalization of video signal is stability. Then, with adaptive threshold control the welding image binaryzation, 3×3 mean level filtration and 3×3 weighting mean level filtration in welding seam are processed.Furthermore, the deviation between the centre of welding torch and the seam welded is found out, even though there are much spatter in the welding image.At last, the end effector of the robot is controlled and a welding torch is carried to track the seam welded during arc welding.