Internal structures and high-velocity frictional properties of Longmenshan fault zone at Shenxigou activated during the 2008 Wenchuan earthquake

This paper reports internal structures of a wide fault zone at Shenxigou,Dujiangyan,Sichuan province,China,and high-velocity frictional properties of the fault gouge collected near the coseismic slip zone during the 2008 Wenchuan earthquake.Vertical offset and horizontal displacement at the trench site were 2.8 m（NW side up）and 4.8 m（right-lateral）,respectively.The fault zone formed in Triassic sandstone,siltstone,and shale about 500 m away from the Yingxiu-Beichuan fault,a major fault in the Longmenshan fault system.A trench survey across the coseismic fault,and observations of outcrops and drill cores down to a depth of 57 m revealed that the fault zone consists of fault gouge and fault breccia of about0.5 and 250-300 m in widths,respectively,and that the fault strikes N62°E and dips 68° to NW.Quaternary conglomerates were recovered beneath the fault in the drilling,so that the fault moved at least 55 m along the coseismic slip zone,experiencing about 18 events of similar sizes.The fault core is composed of grayish gouge（GG） and blackish gouge（BG） with very complex slip-zone structures.BG contains low-crystalline graphite of about 30 %.High-velocity friction experiments were conducted at normal stresses of 0.6-2.1 MPa and slip rates of 0.1-2.1 m/s.Both GG and BG exhibit dramatic slip weakening at constant high slip rates that can be described as an exponential decay from peak friction coefficient lpto steadystate friction coefficient lssover a slip-weakening distance Dc.Deformation of GG and BG is characterized by overlapped slip-zone structures and development of sharp slickenside surfaces,respectively.Comparison of our data with those reported for other outcrops indicates that the high-velocity frictional properties of the Longmenshan fault zones are quite uniform and the high-velocity weakening must have promoted dynamic rupture propagation during the Wenchuan earthquake.

Analysis of Dynamic Characteristics of Crustal Horizontal Deformation in the South Segment of Longmenshan Fault Zone Revealed by GPS Data after the Wenchuan Earthquake

In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.

Internal structure of Longmenshan fault zone at Hongkou outcrop,Sichuan,China,that caused the 2008 Wenchuan earthquake

This paper reports the internal structures of the Beichuan fault zone of Longmenshan fault system that caused the 2008 Wenchuan earthquake, at an outcrop in Hongkou, Sichuan province, China. Present work is a part of comprehensive project of Institute of Geology, China Earthquake Administration, trying to understand deformation processes in Longmenshan fault zones and eventually to reproduce Wenchuan earthquake by modeling based on measured mechanical and transport properties. Outcrop studies could be integrated with those performed on samples recovered from fault zone drilling, during the Wenchuan Earthquake Fault Scientific Drilling （WFSD） Project, to understand along-fault and depth variation of fault zone properties. The hanging wall side of the fault zone consists of weakly-foliated, clayey fault gouge of about 1 m in width and of several fault breccia zones of 30-40 m in total width. We could not find any pseudotachylite at this outcrop. Displacement during the Wenchuan earthquake is highly localized within the fault gouge layer along narrower slipping-zones of about 10 to 20 mm in width. This is an important constraint for analyzing thermal pressurization, an important dynamic weakening mechanism of faults. Overlapping patterns of striations on slickenside surface suggest that seismic slip at a given time occurred in even narrower zone of a few to several millimeters, so that localization of deformation must have occurred within a slipping zone during coseismic fault motion. Fault breccia zones are bounded by thin black gouge layers containing amorphous carbon. Fault gouge contains illite and chlorite minerals, but not smectite. Clayey fault gouge next to coseismic slipping zone also contains amorphous carbon and small amounts of graphite. The structural observations and mineralogical data obtained from outcrop exposures of the fault zone of the Wenchuan earthquake can be compared with those obtained from the WFSD-1 and WFSD-2 boreholes, which have been drilled very close to the Hongkou outcrop. The presence of carbon and graphite, observed next to the slipping-zone, may affect the mechanical properties of the fault and also provide useful information about coseismic chemical changes.

High-velocity frictional behavior of Longmenshan fault gouge from Hongkou outcrop and its implications for dynamic weakening of fault during the 2008 Wenchuan earthquake

High-velocity friction experiments were conducted on clayey fault gouge collected from Hongkou outcrop of Beichuan fault, located at the southwestern part of Longmenshan fault system that caused the disastrous 2008 Wenchuan earthquake. The ultimate purpose of this study is to reproduce this earthquake by modeling based on measured frictional properties. Dry gouge of about 1 mm in thickness was deformed dry at slip rates of 0.01 to 1.3 m/s and at normal stresses of 0.61 to 3.04 MPa, using a rotary-shear high-velocity frictional testing machine. The gouge displays slip weakening behavior as initial peak friction decays towards steady-state values after a given displacement. Both peak friction and steady-state friction remain high at slow slip rates are exam- ined and gouge only exhibits dramatic weakening at high slip rates, with steady-state friction coefficient values of about 0.1 to 0.2. Specific fracture energy ranges from 1 to 4 MN/m in our results and this is of the same order as seismically determined values. Low friction coefficients measured on experimental faults are in broad agree- ment with lack of thermal anomaly observed from temperature measurements in WFSD-1 drill hole （Wenchuan Earthquake Fault Scientific Drilling Project）, which can be explained by even smaller friction coefficient for the Wenchuan earthquake fault. High-velocity friction experiments with pore water needs to be done to see if even smaller friction is attained or not. Shiny slickenside surfaces form at high slip rates, but not at slow slip rates. Slip zone with slickenside surface changes its color to dark brown and forms duplex-like microstructures, which are similar to those microstructures found in the fault gouges from the Hongkou outcrop. Detailed comparisons between experimentally deformed gouge samples and WFSD drill cores in the future will reveal how much we could reproduce the dynamic weakening processes in operation in fault zones during Wenchuan earthquake at present.

Influence of 2008 Wenchuan earthquake on earthquake occurrence trend of active faults in Sichuan-Yunnan region

The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.

Discussion on the Abnormally Low Active Fault Slip Rate of the M_S 8. 0 Wenchuan Earthquake

Based on the collection of active fault slip rate data of large intra-continental shallow thrust earthquakes occurring in the triangular seismic region of the East Asia continent,a preliminary analysis has been performed with results showing that the Wenchuan,Sichuan, China earthquake ( MS = 8.0) of May 12,2008 occurred on the Longmenshan Mountain active fault with an abnormally low slip rate.

Dextral-Slip Thrust Faulting and Seismic Events of the Ms 8.0 Wenchuan Earthquake,Longmenshan Mountains,Eastern Margin of the Tibetan Plateau

Dextral-slip thrust movement of the Songpan-Garze terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault （CLF） along a distance of -250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1-EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0-10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10-42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextralslip with minor thrust and slickensides plunging 25°-35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42-60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60-95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°-50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.

The seismicity and tectonic stress field characteristics of the Longmenshan fault zone before the Wenchuan M_S8.0 earthquake

The seismicity of Longrnenshan fault zone and its vicinities before the 12 May 2008 Wenchuan Ms8.0 earthquake is studied. Based on the digital seismic waveform data observed from regional seismic networks and mobile stations, the focal mechanism solutions are determined. Our analysis results show that the seismicities of Longmenshan fault zone before the 12 May 2008 Wenchuan earthquake were in stable state. No obvious phenomena of seismic activity intensifying appeared. According to focal mechanism solutions of some small earthquakes before the 12 May 2008 Wenchuan earthquake, the direction of principal compressive stress P-axis is WNW-ESE. The two hypocenter fault planes are NE-striking and NW-striking. The plane of NE direction is among N50°-70°E, the dip angles of fault planes are 60°-70° and it is very steep. The faultings of most earthquakes are dominantly characterized by dip-slip reverse and small part of faultings present strike-slip. The azimuths of principal compressive stress, the strikes of source fault planes and the dislocation types calculated from some small earthquakes before the 12 May 2008 Wenchuan earthquake are in accordance with that of the main shock. The average stress field of micro-rupture along the Longmenshan fault zone before the great earthquake is also consistent with that calculated from main shock. Zipingpu dam is located in the east side 20 km from the initial rupture area of the 12 May 2008 Wenchuan earthquake. The activity increment of small earthquakes in the Zipingpu dam is in the period of water discharging. The source parameter results of the small earthquakes which occurred near the initial rupture area of the 12 May 2008 Wenchuan earthquake indicate that the focal depths are 5 to 14 km and the source parameters are identical with that of earthquake.

Preliminary Results of In-situ Stress Measurements along the Longmenshan Fault Zone after the Wenchuan M_s 8.0 Earthquake

Four months after the Wenchuan Ms 8 earthquake in western Sichuan, China, in situ stress measurements were carried out along the Longmenshan fault zone with the purpose of obtaining stress parameters for earthquake hazard assessment. In-situ stresses were measured in three new boreholes by using overcoring with the piezomagnetic stress gauges for shallow depths and hydraulic fracturing for lower depths. The maximum horizontal stress in shallow depths （-20 m） is about 4.3 MPa, oriented N19°E, in the epicenter area at Yingxiu Town, about 9.7 MPa, oriented N51°W, at Baoxing County in the southwestern Longmenshan range, and about 2.6 MPa, oriented N39°E, near Kangding in the southernmost zone of the Longmenshan range. Hydraulic fracturing at borehole depths from 100 to 400 m shows a tendency towards increasing stress with depth. A comparison with the results measured before the Wenchuan earthquake along the Longmenshan zone and in the Tibetan Plateau demonstrates that the stress level remains relatively high in the southwestern segment of the Longmenshan range, and is still moderate in the epicenter zone. These results provide a key appraisal for future assessment of earthquake hazards of the Longmenshan fault zone and the aftershock occurrences of the Wenchuan earthquake.

Variation of the Energy Field of Longmenshan Fault Zone before the Wenchuan M_S 8. 0 Earthquake

During the process of preparation and occurrence of a large earthquake, the stress-strain state along the fault zone has close relation with the weak seismicity around the fault zone. The seismic energy release near the fault zone before an earthquake can better reflect the dynamic process of earthquake preparation. Thus, in this paper, the method of natural orthogonal function expansion has been adopted to discuss the time variation about the energy field of the seismic activity along the Longmenshan fault zone before the Wenchuan MsS. 0 earthquake, 2008. The results show that evident short-term rise changes appeared in the time factors of the typical field corresponding to several key eigenvalues of the energy field along the Longmenshan fault zone before the Wenchuan earthquake, probably being the short-term anomaly message for this earthquake. Through contrastive analysis of earthquake examples such as the 1976 Tangshan earthquake, the authors think that the study of time variation of energy field of seismicity along active fault zone will be helpful for conducting intentional and intensive earthquake monitoring and forecast in active fault regions with high seismic risk based on medium- and long-term earthquake trend judgment.

Parameters of Coseismic Reverse- and Oblique-Slip Surface Ruptures of the 2008 Wenchuan Earthquake,Eastern Tibetan Plateau

On May 12th, 2008, the Mw7.9 Wenchuan earthquake ruptured the Beichuan, Pengguan and Xiaoyudong faults simultaneously along the middle segment of the Longmenshan thrust belt at the eastern margin of the Tibetan plateau. Field investigations constrain the surface rupture pattern, length and offsets related to the Wenchuan earthquake. The Beichuan fault has a NE-trending rightlateral reverse rupture with a total length of 240 km. Reassessment yields a maximum vertical offset of 6.5±0.5 m and a maximum right-lateral offset of 4.9±0.5 m for its northern segment, which are the largest offsets found; the maximum vertical offset is 6.2±0.5 m for its southern segment. The Pengguan fault has a NE-trending pure reverse rupture about 72 km long with a maximum vertical offset of about 3.5 m. The Xiaoyudong fault has a NW-striking left-lateral reverse rupture about 7 km long between the Beichuan and Pengguan faults, with a maximum vertical offset of 3.4 m and left-lateral offset of 3.5 m. This pattern of multiple co-seismic surface ruptures is among the most complicated of recent great earthquakes and presents a much larger danger than if they ruptured individually. The rupture length is the longest for reverse faulting events ever reported.

Internal structures and high-velocity frictional properties of a bedding-parallel carbonate fault at Xiaojiaqiao outcrop activated by the 2008 Wenchuan earthquake

This paper reports internal structures of a bedding-parallel fault in Permian limestone at Xiaoji-aqiao outcrop that was moved by about 0.5 m during the 2008 MW7.9 Wenchuan earthquake. The fault is located about 3 km to the south from the middle part of Yingxiu-Beichuan fault, a major fault in the Longmenshan fault system that was moved during the earthquake. The outcrop is also located at Anxian transfer zone between the northern and central segments of Yingxiu-Beichuan fault where fault system is complex. Thus the fault is an example of subsidiary faults activated by Wenchuan earthquake. The fault has a strike of 243°or N63°E and a dip of 38°NW and is nearly optimally oriented for thrust motion, in contrast to high-angle coseismic faults at most places. Surface outcrop and two shallow drilling studies reveal that the fault zone is several centimeters wide at most and that the coseismic slip zone during Wenchuan earthquake is about 1 mm thick. Fault zone contains foliated cataclasite, fault breccia, black gouge and yellowish gouge. Many clasts of foliated cataclasite and black gouge contained in fault breccia indicate multiple slip events along this fault. But fossils on both sides of fault do not indicate clear age difference and overall displacement along this fault should not be large. We also report results from high-velocity friction experiments conducted on yellowish gouge from the fault zone using a rotary shear low to high-velocity frictional testing apparatus. Dry experiments at normal stresses of 0.4 to 1.8 MPa and at slip rates of 0.08 to 1.35 m/s reveal dramatic slip weakening from the peak friction coeffcient of around 0.6 to very low steady-state friction coeffcient of 0.1–0.2. Slip weakening parameters of this carbonate fault zone are similar to those of clayey fault gouge from Yingxiu-Beichuan fault at Hongkou outcrop and from Pingxi fault zone. Our experimental result will provide a condition for triggering movement of subsidiary faults or off-fault damage during a large earthquake.

Crustal Motion Characteristics in the Eastern Margin of the Tibetan Plateau and Adjacent Regions after the Wenchuan Earthquake

The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.

Fault-zone trapped waves at Muyu in Wenchuan earthquake region

Trapped waves in the Qingchuan fault zone were observed at Muyu near the northeastern end of the fractured zone of the Wenchuan Ms8. 0 earthquake. The results indicate a fault-zone width of about 200 m and a great difference in physical property of the crust on different sides of the fault. The inferred location of crustal changes is consistent with land-form boundary on the surface

The Genetic Mechanism of Wenchuan Earthquake

The genetic mechanism of the 5.12 Wenchuan Earthquake is still being debated and there is still no convincing general explanation for most of the phenomena. This is because researchers have ignored the important role of the Minshan block in the seismogenic process. The authors present a new opinion based on geological survey and comprehensive analyses. The Minshan block is a key tectonic element of the earthquake occurrence in the northwest triangle faulty block of Sichuan Province. The Minshan block is bordered by Longmen Mountain Range fractures in the south, the Huya fracture in the east, the Tazang fracture in the north and the Mounigou Valley fracture in the west. The rigidity of the block is relatively larger than those of the adjacent regions. The block's eastward movement pushed by regional maximum main geo-stress is limited when it suddenly tapers off near the east triangle end with a bottle-neck effect, and this causes geo-stress concentration around it. The shape of the block is coffin-like, wide in the upper part and narrow in the lower part. When a strong earthquake occurs along the block margins, the lock-up effect temporarily released, resulting in geo-stress transmitted to the Pingwu-Qingchuan (Motianling block) region. This transmission caused the Wenchuan earthquake's aftershocks to be concentrated in Qingchuan region. As the block moved eastward, the back of the block, i.e. the south segment of Mounigou Valley fracture, became active after the Wenchuan Earthquake. Therefore the aftershocks were concentrated along the south segment of Mounigou Valley fracture. Because the south margin is composed of the front range fracture, the geo-stress gradually released, causing many aftershocks along the Guanxian-Anxian fracture. The geological survey made after the Wenchuan Earthquake reveals that the surface ruptures in the south margin of Minshan block occur not along the Beichuan-Yingxiu fracture (central fracture) also along the front range fracture. The length of the surface rupture in the south margin ranges from several meters to several kilometers and it is distributed in en echelon (closely-spaced, parallel or subparallel, step-like surface ruptures). The vertical and horizontal displacements range from place to place and the thrusting component is dominant in the middle segment of Longmen Mountain Range structure belt. Nevertheless, the strike slip of the surface ruptures is dominant in the north segment of Longmen Mountain Range structure belt. Therefore the south margin is the original seismic structure. The sudden thrusting of the south margin of the Minshan block is the source event for the Wenchuan Earthquake.

Relationship between Crustal 3D Density Structure and the Earthquakes in the Longmenshan Range and Adjacent Areas

This paper presents the 3D density structure of crust in the Longmenshan range and adjacent areas, with constraints from seismic and density data. The density structure of crust shows that the immense boundary plane of density distribution in relation to the Longmeshan fault belt is extended downward to -80 km deep. This density boundary plane dips towards the northwest and crosses the Moho. With the proximity to the Longmenshan fault belt, it has a larger magnitude of undulation in the upper and middle crust levels. Density changes abruptly across Longmeshan fault belt. Seismic data show that most of the earthquakes in the Longmenshan area after the 2008 Ms8.0 Wenchuan Earthquake occurred within the upper to middle crust. These earthquakes are clearly distributed in the uplifted region of the basement. A few of them occurs in the transitional zone between the uplifted and subsided areas. But most of the earthquakes distributes in transitional zone from subsided to uplifted areas in the upper and middle crust where relatively large density changes occurr The 3D density structure of crust in the Longmenshan and adjacent areas can thus help us to understand the pattern of overthrusting from the standpoint of deep crust and where the earthquakes occurred.

Exploration of fault-zone trapped waves at Pingtong Town,in Wenchuan earthquake region

Pingtong Town is located on the fractured zone of the Wenchuan 8.0 earthquake, and is seriously damaged by the earthquake. Our observation line is centered at an earthquake exploration trench across the fractured zone in the NW-SE direction, and is about 400 m long. The results reveal trapped waves in the rup- tured fault zone of the earthquake, and indicate a great difference in physical property between the media inside and outside the fault zone. The predominant frequency of the fault-zone trapped waves is about 3 -4 Hz. The wave amplitudes are larger near the exploration trench. The width of the fault zone in the crust at this location is estimated to be 200 m. In some records, the waveforms and the arrival times of S waves are quite different between the two sides of the trench. The place of change coincides with the boundary of uplift at the surface.

Numerical simulation on the influences of Wenchuan earthquake on the surrounding faults

On 12 May 2008, the devastating Wenchuan earthquake struck the Longmenshan fault zone, which comprised the eastern margin of the Tibetan Plateau, and this fault zone was predominantly a convergent boundary with a right-lateral strike-slip component. After such a large-magnitude earthquake, it was crucial to analyze the influences of the earthquake on the surrounding faults and the potential seismic activity. In this paper, a complex viscoelastic model of western Sichuan and eastern Tibet regions was constructed including the topography. Based on the findings of co-seismic static slip distribution, we calculated the stress change caused by the Wenchuan earthquake with the post-seismic relaxation into consideration. Our preliminary results indicated that： （1） The tectonic stressing rate was relatively high in Kunlun mountain pass-Jiangcuo, Ganzi-Yushu, Xianshuihe and Zemuhe faults; while in the east Kunlun and Longriba was medium; also the value was less in the Minjiang, Longmenshan, Anninghe and Huya faults. As to the Longmenshan fault, the value was 0.28×10-3 MPa/a to 0.35×10-3 MPa/a, which is coincident with the previous long recurrence interval of Wenchuan earthquake; （2） The Wenchuan earthquake not only caused the Coulomb stress decrease in the source region, but also the stress increase in the two terminals, especially the northeastern segment, which is comparatively consistent with the aftershock distribution. Meanwhile, the high concentration areas of the static slip distribution were corresponding to the Coulomb stress reductions; （3） The Coulomb stress change caused by Wenchuan earthquake showed significant increase on five major faults, which were northwestern segment of Xianshuihe fault, eastern Kunlun fault, Longriba fault, Minjiang fault and Huya fault respectively; also the Coulomb stress on the fault plane of the Yushu earthquake was faintly increased; （4） We defined the recurrence interval as the time needed to accumulate the magnitude of the stress drop, and the recurrence interval of Wenchuan earthquake was estimated about 1 714 a to 2 143 a correspondingly.

Crustal P-wave velocity structure of the Longmenshan region and its tectonic implications for the 2008 Wenchuan earthquake

The P-wave velocity structure of the crust in the Longmenshan region has been imaged by seismic travel time tomography us ing local and regional first P-wave arrivals recorded from 2000 to 2008. The tomographic model provides a way to analyze the deep tectonics of the Longmenshan fault belt and the tectonic implications for the 2008 Ms8.0 Wenchuan earthquake. The P-wave velocity images indicate that the initial rupture site and focal depth of the Wenchuan earthquake, together with the di rection of rupture propagation, closely relate to the crustal structure of the Longmenshan region. The Pengguan massif to the west of the Longmenshan fault belt is characterized by high velocity anomalies, suggesting that the crust has a strong strain strength that can accumulate large stresses over a long period. The Ms8.0 Wenchuan earthquake is located at the southwestern end of the Pengguan massif and the western edge of the Sichuan Basin. The collision between the Pengguan massif and the Sichuan Basin becomes the primary reason for the occurrence of the Ms8.0 Wenchuan earthquake. To the north of Wenchuan, the occurrence and propagation of rupture benefit from low velocity anomalies along the Longmenshan fault belt; whereas to the south of Wenchuan, the brittle rupture can occur with more difficulty in relatively weak crust with low velocities. This may be one of the reasons for the absence of aftershocks to the south of Wenchuan, and the rupture induced by the Ms8.0 Wenchuan earthquake propagating from the north to the south along the Longmenshan fault belt. The deep geodynamics of the Ms8.0 Wenchuan earthquake may occur due to the discrepancy of crustal structures on the two sides of the Longmenshan fault belt. Ductile deformation and crustal flow can easily occur in the weak middle-lower crust beneath the Songpan-Garze orogenic belt. The eastward movement of the Tibetan Plateau is obstructed by the rigid lithosphere of the Sichuan Basin, and then the thick ening of the middle-lower crust and vertical deformation occur in the crust of the Longmenshan fault belt. In addition, the down-warping of the Moho and the basement thrusting onto the range front induced crustal deformation and strain accumula tion, which provided the potential energy to trigger the occurrence of the Ms8.0 Wenchuan earthquake.

Tectonic Features of the M_S8.0 Wenchuan Earthquake and Its Aftershocks

The M8.0 Wenchuan earthquake occurred on the Longmenshan fault zone. Based on field investigation of the surface rupture and focal mechanism study of the aftershocks, we discuss the geological relationship of the main, secondary and triggered ruptures. The main rupture is about 200km long and can be divided into the south part and the north part. The south part consists of two parallel fault zones characterized by reverse faulting, with several parallel secondary ruptures on the hanging wall of the main fault, and the north part is a single main fault zone characterized by lateral strike-slip and reverse faulting. Compared to a 300km long aftershock distribution, the surface rupture only occupies 200km, and the remaining lOOkm on the northeast of the main rupture was triggered by aftershocks. Study on the ruptures of this earthquake will be useful for studying the earthquake risk evolution on the Longmenshan fault system.