Gravity variation associated with Wenchuan earthquake in western Sichuan

Based on the data of mobile gravity observation from 1998 to 2008 in western Sichuan, spatial dynamic variation results of regional gravity field are obtained. The relationship between the gravity variation features and Wenchuan Ms8.0 earthquake is systematically analyzed. The results show： 1 ） Gravity variation is closely related to active fault tectonics, and gravity measurement can better reflect material migration following crustal tectonic activity near active fault. 2）The gravity field appeared a wider range regional gravity variation during Wenchuan earthquake occurrence. The dynamic patterns of gravity field demonstrates the evolution process of gravity field ： quasi - homogeneous state non - homogeneous state-earthquake occurrence.

Influence of 2008 Wenchuan earthquake on earthquake occurrence trend of active faults in Sichuan-Yunnan region

The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults＇ slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.

Surface rupture and hazard characteristics of the Wenchuan Ms 8.0 earthquake, Sichuan, China

Longmen Shan is located the special joint be-tween Tibetan Plateau inland in the west and Yangtze craton in the east. Consisting of a se-ries of parallel imbricated thrust, it develops, from the west to the east, the Maoxian- Wenchuan, Beichuan-Yingxiu and Pengxian- ﹡This research was supported by China National Natural Science Foundation grant 40841010, 40972083 and China National Science and Technology supporting Plan Foundation grant 2006BAC13B02-07, 2006BAC13B01-604. Guanxian faults. The Wenchuan earthquake is a thrust with strike-slip type, and thre surface ruptures are located on the Beichuan-Yingxiu fault zone and Pengxian-Guanxian fault zone. The surface rupture on the Beichuan-Yingxiu fault shows the thrust and dextral slip charac-teristic. The maximum vertical displacement of the surface rupture is about 10.3 m and the maxi-mum right-lateral displacement is about 5.85m. Though the vertical displacements and the hori-zontal displacements in the different segments have certain differences, as a whole, the ratio of the vertical displacement and the horizontal dis-placement is close to 1:1. The surface rupture on the Pengxian-Guanxian fault shows thrust and dextral characteristic. The rates of vertical dis-placements and the horizontal displacements ones on the most other segments are between 1:3 and 1:2. So the Beichuan- Yingxiu fault is a dextral-slip and thrust fault and the average ver-tical displacement is equal to the average hori-zontal displacement, while the Pengxian- Guan xian fault is thrust fault with a little dextral-slip component. The total intensity area above Ⅵ de-gree of the Wenchuan earthquake is about 333000 km2. The high earthquake intensity line stretches to N40-50°E along Longmen Shan tectonic belt. The rate of the long axis and the minor is betw- een 8:1 and 10:1. Three Ⅺ intensity regions are isolated in distribution. It presents a multipoint instantaneous characteristic of the rupture.

Surface Rupture and Hazard of Wenchuan Ms 8.0 Earthquake, Sichuan, China

Longmen Shan is located the special joint between the Qinghai-Tibetan Plateau in the west and the Yangtze craton in the east. Consisting of a series of parallel imbricated thrust, it develops, from the west to the east, the Maoxian-Wenchuan, Yingxiu-Beichuan and Pengxian-Guanxian faults. Wenchuan Ms 8.0 earthquake is a thrust with strike-slip type, and surface ruptures are located in Yingxiu-Beichuan fault zone and Peng- xian-Guanxian fault zone. Based on the geological background, tectonic setting, the active tectonics of Long- men Shan and surface ruptures of the Wenchuan earthquake, a dynamical model to illustrate possible links between surface processes and upward extrusion of lower crustal flow channel at the eastern margin of the Tibetan plateau have been studied, and the results is the material in lower crust in the Longmen Shan moving as nearly-vertical extrusion and uplift, resulting in the surface rate of tectonic movement differing according to depth rate as well as the occurrence of large shallow Wenchuan earthquake.

Aftershock of the Wenchuan Earthquake in Sichuan Triggers Large Earthquake in Minxian County, Gansu

Because of the confining compression of the Pacific, Eurasian and Indian plates, the Chinese mainland is frequently stricken with earthquakes, especially in the Qinghai Tibet Plateau and surrounding areas and along the NS-trending tectonic zone from Yinchuan to Lanzhou, Chengdu, and finally to the Kunming tectonic belt （Fig. 1）. Historical records show that there are 14 earthquakes of 〉Ms 8 occurring in the two regions, eight of which occurred along the latter tectonic belt. The 2008 Wenchuan earthquake located on both the NS tectonic zone and the Longmenshan fault zone along the eastern margin of the Qinghai-Tibet Plateau.

Possible precursory anomalies in ground water level associated with the Wenchuan Ms 8.0 earthquake in 2008,Sichuan,China

We have examined the water level data from 16 wells in Sichuan province,China,recorded before the Wenchuan Ms8.0 earthquake occurred in 2008.We found that the data of 5 among these wells exhibit possible precursory anomalies,which are respectively named the Chuan No.08 well in Deyang,Chuan No.ll well in Pujiang,Chuan No.13 well in Luzhou,Chuan No.22 well in Qionglai and Beichuan.In time durations,these anomalies are of long-,intermediate-and short-term signals which are primarily distributed on the northeast(NE)trending Longmenshan fault zone as well as the parallel Huayingshan fault zone.It seems that the variations of the well levels on the Huayingshan fault zone imply compression while those on the Longmenshan fault zone reflect extension.These anomalies occurred first in the areas outside the epicenter region of the Wenchuan Ms8.0 earthquake,then migrated to the seismogenic fault zone.And they migrated from southwest to northeast in agreement with the rupture process of the main shock.

Study on Postseismic Impact of Wenchuan Earthquake on the Sichuan-Yunnan Region Based on Three-Dimensional Viscoelastic Finite Element Method

Based on the lateral segmentation and vertical stratification characteristics of the crustal medium in Sichuan-Yunnan region,and the asymmetry of the static dislocations on the coseismic fault plane of the Wenchuan M_S8.0 earthquake,we built a three-dimensional viscoelastic finite element model of the crust in the Sichuan-Yunnan region.The postseismic impact of the Wenchuan M_S8.0 earthquake on the Sichuan-Yunnan region was studied.The results show that:①The far-field horizontal deformation caused by the viscoelastic relaxation of the medium in the 10 years after the earthquake is about 0-20 mm within the Sichuan-Yunnan diamond-shaped block,which has a greater influence on north side and smaller on south side.②In the 10 years after the earthquake,the far-field vertical deformation caused by the viscoelastic relaxation effect of the medium is small,and it shows an increase of about 0-4 mm in most areas of the Sichuan-Yunnan diamond-shaped block.③The Xianshuihe fault and the eastern segment of the East Kunlun fault,which are close to the seismogenic fault,show a high gradient on deformation fields after the earthquake.④In order to compare with the strong earthquake activity in the SichuanYunnan region after the Wenchuan earthquake,the horizontal stress state and the Coulomb failure stress change of the active block boundary are also calculated.From the spatial distribution of the coseismic and postseismic displacement field,the fault activity characteristics reflected by the stress state and the stress loading of the fault layer reflected by the Coulomb failure stress change,there is a certain correlation with the spatial distribution of strong earthquake activity in this region.

GPS observation in Sichuan-Yunnan and its vicinity before and after the Wenchuan earthquake in a decade

Based on the horizontal velocity data observed by GPS during 2004-2007,2007-2009,and 2011-2017 before,during,and after the Wenchuan earthquake in Sichuan-Yunnan and its vicinity,we analyze evolution features of the tectonic deformation caused by crustal movement in main active fault belts,and its possible influence.We conclude:the Wenchuan earthquake area showed obvious co-seismic thrust and dextral deformation from 2007 to 2009.The earthquake,to a certain extent,promoted tectonic movements on the Gansu-Sichuan boundary,Western Qinling fault zone,Anninghe-Zemuhe fault zone,and southern Xianshuihe fault zone.The vectors and strain filed acquired by GPS during Lushan and Jiuzhaigou earthquakes period may indicate that the southwest segment in the Longmenshan fault zone still has the possibility of larger earthquakes.

Surface Rupture and Co-seismic Displacement Produced by the Ms 8.0 Wenchuan Earthquake of May ^(12)th,2008,Sichuan,China:Eastwards Growth of the Qinghai-Tibet Plateau

An earthquake of Ms 8 struck Wenchuan County, western Sichuan, China, on May 12^th, 2008 and resulted in long surface ruptures （〉300 km）. The first-hand observations about the surface ruptures produced by the earthquake in the worst-hit areas of Yingxiu, Beichuan and Qingchuan, ascertained that the causative structure of the earthquake was in the central fault zones of the Longmenshan tectonic belt. Average co-seismic vertical displacements along the individual fault of the Yingxiu-Beiehuan rupture zone reach 2.514 m and the cumulative vertical displacements across the central and frontal Longmenshan fault belt is about 5-6 m. The surface rupture strength was reduced from north of Beichuan to Qingchuan County and shows 2-3 m dextral strike-slip component. The Wenchuan thrust-faulting earthquake is a manifestation of eastward growth of the Tibetan Plateau under the action of continuous convergence of the Indian and Eurasian continents.

Abnormal Phenomena Recorded by Several Earthquake Precursor Observation Instruments Before the M_s 8.0 Wenchuan,Sichuan Earthquake

The paper introduces the anomalies observed by digital tiltmeter, cross-fault deformation meter, 4-component borehole strainmeter and geothermometer before May 12, 2008, Ms8.0 Wenchuan earthquake, Sichuan. The digital tiltmeter installed in the epicentral region in Shifang County recorded the tilt anomalies 15 days before the earthquake with variation amplitude of 3.7 times larger than the annual deviation of 2007. The cross-fault deformation meter installed at Zimakua station on the Xianshuihe-Anninghe fault zone detected displacement anomaly occurring since 2006 with the variation amplitude exceeding the cumulative value of the last ten years. Five borehole strainmeter stations in the Chongqing section of Three Gorges Reservoir area observed unconventional strain changes occurring in the period from May 1 through 12, 2008. Among them, the strainmeter at Wanzhou station recorded the great compression strain rate on the EW component at 14：00 o＇clock of May 10, and the anomaly amplitude was so large that the instrument output exceeded its dynamic range, corresponding to a level of -10^4 nanostrains. The geothermometers installed in Xi＇an, Chongqing and Xichang recorded the sudden temperature changes from November 2007 to January 2008 with the variation amplitudes several times larger than the ordinary deviation. The above phenomena and the criteria for distinguishing the anomalies from background fluctuations are discussed in this paper.

Internal structure of Longmenshan fault zone at Hongkou outcrop,Sichuan,China,that caused the 2008 Wenchuan earthquake

This paper reports the internal structures of the Beichuan fault zone of Longmenshan fault system that caused the 2008 Wenchuan earthquake, at an outcrop in Hongkou, Sichuan province, China. Present work is a part of comprehensive project of Institute of Geology, China Earthquake Administration, trying to understand deformation processes in Longmenshan fault zones and eventually to reproduce Wenchuan earthquake by modeling based on measured mechanical and transport properties. Outcrop studies could be integrated with those performed on samples recovered from fault zone drilling, during the Wenchuan Earthquake Fault Scientific Drilling （WFSD） Project, to understand along-fault and depth variation of fault zone properties. The hanging wall side of the fault zone consists of weakly-foliated, clayey fault gouge of about 1 m in width and of several fault breccia zones of 30-40 m in total width. We could not find any pseudotachylite at this outcrop. Displacement during the Wenchuan earthquake is highly localized within the fault gouge layer along narrower slipping-zones of about 10 to 20 mm in width. This is an important constraint for analyzing thermal pressurization, an important dynamic weakening mechanism of faults. Overlapping patterns of striations on slickenside surface suggest that seismic slip at a given time occurred in even narrower zone of a few to several millimeters, so that localization of deformation must have occurred within a slipping zone during coseismic fault motion. Fault breccia zones are bounded by thin black gouge layers containing amorphous carbon. Fault gouge contains illite and chlorite minerals, but not smectite. Clayey fault gouge next to coseismic slipping zone also contains amorphous carbon and small amounts of graphite. The structural observations and mineralogical data obtained from outcrop exposures of the fault zone of the Wenchuan earthquake can be compared with those obtained from the WFSD-1 and WFSD-2 boreholes, which have been drilled very close to the Hongkou outcrop. The presence of carbon and graphite, observed next to the slipping-zone, may affect the mechanical properties of the fault and also provide useful information about coseismic chemical changes.

Co-seismic Faults and Geological Hazards and Incidence of Active Fault of Wenchuan Ms 8.0 Earthquake,Sichuan,China

There are two co-seismic faults which developed when the Wenchuan earthquake happened. One occurred along the active fault zone in the central Longmen Mts. and the other in the front of Longmen Mts. The length of which is more than 270 kin and about 80 km respectively. The co-seismic fault shows a reverse flexure belt with strike of N45°-60°E in the ground, which caused uplift at its northwest side and subsidence at the southeast. The fault face dips to the northwest with a dip angle ranging from 50° to 60°. The vertical offset of the co-seismic fault ranges 2.5-3.0 m along the Yingxiu- Beichuan co-seismic fault, and 1.5-1.1 m along the Doujiangyan-Hanwang fault. Movement of the coseismic fault presents obvious segmented features along the active fault zone in central Longmen Mts. For instance, in the section from Yingxiu to Leigu town, thrust without evident slip occurred; while from Beichuan to Qingchuan, thrust and dextral strike-slip take place. Main movement along the front Longmen Mts. shows thrust without slip and segmented features. The area of earthquake intensity more than IX degree and the distribution of secondary geological hazards occurred along the hanging wall of co-seismic faults, and were consistent with the area of aftershock, and its width is less than 40km from co-seismic faults in the hanging wall. The secondary geological hazards, collapses, landslides, debris flows et al., concentrated in the hanging wall of co-seismic fault within 0-20 km from co-seismic fault.

Satellite Thermal Infrared Earthquake Precursor to the Wenchuan M_s 8.0 Earthquake in Sichuan,China,and its Analysis on Geo-dynamics

Based on an interpretation and study of the satellite remote-sensing images of FY-2C thermal infrared 1st wave band （10.3-11.3 μm） designed in China, the authors found that there existed obvious and isolated satellite thermal infrared anomalies before the 5.12 Wenchuan Ms 8.0 Earthquake. These anomalies had the following characteristics： （1） The precursor appeared rather early： on March 18, 2008, i.e., 55 days before the earthquake, thermal infrared anomalies began to occur; （2） The anomalies experienced quite many and complex evolutionary stages： the satellite thermal infrared anomalies might be divided into five stages, whose manifestations were somewhat different from each other. The existence of so many anomaly stages was probably observed for the first time in numerous cases of satellite thermal infrared research on earthquakes; （3） Each stage lasted quite a long time, with the longest one spanning 13 days; （4） An evident geothermal anomaly gradient was distributed along the Longmen seismic fracture zone, and such a phenomenon might also be discovered for the first time in satellite thermal infrared earthquake research. This discovery is therefore of great guiding and instructive significance in the study of the earthquake occurrence itself and the trend of the postearthquake phenomena.

Impact of the Wenchuan Earthquake on Tourism in Sichuan,China

An intensive earthquake, the Wenchuan Earthquake of 8.0 on the Richter scale, struck western Sichuan, China on May 12, 2008. The earthquake has tremendously affected all industries in the quake-hit areas, with no exception of the local tourism. The study of the effect of the earthquake on tourism enriches the theory of tourism, and more importantly, it well serves as the foundation for policy making. The objective of this study is to outline for readers the empirical findings on the various ways that the earthquake affected the operations and viability of tourism in the quake-hit areas. This paper is mainly divided into 3 parts. The first part is to discuss the importance of tourism in the quake-hit areas. The second is to analyze the influencing factors of tourism. The third is to assess the impact of the earthquake on tourism in Sichuan in different seasons.

Geo-engineering Lessons Learned from the 2008 Wenchuan Earthquake in Sichuan and Their Significance to Reconstruction

The 2008 Wenchuan earthquake in Sichuan of China was the result of quake-triggering along an active several hundred-kilometer-long fault. The subsequent landslides and debris flow geohazards are dominating factors in planning post-disaster recovery and rebuilding. This paper presents recommendations for coping with large-scale geohazards and disasters. It is essential to establish a national emergency management system for huge scale catastrophe and earthquake precursor identification. Town construction must be kept away from active faults, especially to improve town safety in areas with high risk of seismic and geological hazards, and it is important to improve geohazard investigation and remediation for mountain areas that have become loosened by earthquake activity. Geological factors must be better understood to reduce direct and secondary risks and effects of earthquakes. Site selections for public relocation require clear and informed analysis of geological and social risk reduction, so that relocation, infrastructure reconstruction, and commemorative relic-sites can be protected.

Evaluation of a traditional method for peak flow discharge estimation for floods in the Wenchuan Earthquake area,Sichuan Province,China

Peak discharge of flood in small mountainous watershed is usually calculated using the "Rainstorm–runoff calculation method in small watersheds in Sichuan Province"(RRM). This study evaluated the RRM calculation using real-time monitored rainfall and hydrologic data from a small watershed in the Wenchuan Earthquake area of Sichuan Province, China. The results indicated that the discharge values given by the RRM are commonly overestimating the measured discharge. The overestimation rate was discussed and empirical equations were proposed for improving RRM estimations, based on the relationship between calculated and measured discharge values at different watershed scales(2, 30, and 40 km2), under different rainfall probabilities(0.97–0.5, 0.5–0.2, and 0.2–0.002), and for different rainfall durations(0–6, 6–24, and >24 h). The results of this study help contribute to the understanding of water floods formation and help provide more accurate estimations of peak flow discharge in small watersheds in the Wenchuan Earthquake area.

Chongqing Beiwenquan Hot Spring Variation Associated with the May 12 2008 Ms 8.0 Earthquake in Wenchuan,Sichuan

Chongqing Beiwenquan hot springs were continuously monitored from May 1 to July 4,2008,during the May 12,2008 Ms 8.0 earthquake.On the spot in these hot springs were measured during this time. Chongqing Beiwenquan hot spring about 400 km away from Wenchuan Sichuan,had a huge response to the earthquake.After the earthquake,three higher elevation springs are cutoff,and the other four springs’ discharge has been increased nearly 50%. Temperature of these springs all reduced 1℃. Concentration of K+,Na+,Ca2+ in these hot springs has been reduced,and has an excellent linear correlation.Concentration of Mg2+ has been increased,Concentration of SO42-,F- has

Damage and Seismic Intensity in the Meizoseismal Region of the M_S8.0 Wenchuan Earthquake,Sichuan,China

This paper presents the damage in the meizoseismal region of the M_S8.0 Wenchuan earthquake,Sichuan,China,and the seismic intensities determined according to "the Chinese Seismic Intensity Scale",and discusses briefly the types of earthquake-generating faults and some features of seismic damage.

Characteristics of block strain and fault movement in the Sichuan-Yunnan region before and after Wenchuan earthquake

Deformation characteristics of the Sichuan-Yunnan region during the two periods 1999--2007 and 2007--2009 are analyzed with a block deformation model and GPS velocity profiles. The results show that the direction of the principal compressive strain rate of the Northwest-Sichuan block - the Mid-Yunnan block - the Southwest-Yunnan block was characterized by a clockwise rotation from north to south. The Anninghe and the Zemuhe faults had some shear-strain accumulation. The southern segment of the Xiaojiang fault had mainly strike-slip movement, while the northern segment was mainly accumulating strain. The 2008 Ms8.0 Wenchuan earthquake had some influence on the mid-southern segment of the Lijiang-Xiaojinhe fault, the Anninghe fault and the Jinshajiang fault, but not the Zemuhe fault, the Xiaojiang fault and the Red River fault as much.

The Focal Mechanism Solutions of the M_S 8.0 Wenchuan Earthquake in Sichuan on May 12,2008 and Some of Its Aftershocks

The focal mechanism solutions of the Wenchuan earthquake （Ms8.0） of May 12, 2008 and some of its aftershocks occurring up to December I0, 2008 are determined with lower semisphere of equal-projection and first motion sign data of P waves from regional and distant stations. The focal mechanism solutions of the Ms8.0 Wenchuan earthquake are： Nodal plane I：strike 5°, dip angle 48°, slip angle 39°; Nodal plane II： strike 247°, dip angle 62°, slip angle 131°; P axis azimuth 309°, plunge 8°, T axis azimuth 208°, plunge 54°, B axis azimuth 44°, plunge 35% Combining geological tectonics and spatial distribution of aftershocks, nodal plane II can be identified as a seismogenic fault. According to focal mechanism solutions, the fault activity that triggered the huge earthquake is reverse thrusting. The main rupture surface is S67°W, basically identical to the fault strike on which the earthquake occurred. The main compression stress P axis is N51°W, which is basically the same as the direction of the regional tectonic stress field. According to the results of focal mechanism solutions of aftershocks, the aftershocks occurring in the southern and northern sections of the Longmenshan fault zone have predominant orientations and are obviously different. For the main shock and the early aftershocks occurring on the southern section of the Longmenshan fault, the rupturing is mainly characterized by reverse-dip slip with some strike-slip, and over time, the aftershocks migrated towards the northern section. The rupturing in the source is mainly characterized by strike-slip with some reverse-dip slips. The stress field is controlled by the main shock stress field in the southern section of the Longmenshan tectonic zone, while it is controlled by the main shock stress field and regional stress field in the northern section of the Longmenshan tectonic zone.