On July 4 2002, a project attracting world attention, i.e., the West-East Gas Pipeline Project was declared in full-scale commencement. The project will write history with its enormous social and economic benefits.
The West East pipeline project attracted the attention from all over the world for its long distance, huge diameter, complex geographic conditions, and diversified welding techniques being applied.In this paper the de...The West East pipeline project attracted the attention from all over the world for its long distance, huge diameter, complex geographic conditions, and diversified welding techniques being applied.In this paper the detail welding process and procedures used in the project are discussed and the distinguished achievements on welding techniques of China pipeline construction are described.展开更多
HTP practice,alloyed with low-carbon (less than 0.06%) and high-niobium (up to 0.11%),has been developed to produce large-wall X80 hot rolled strip for 2nd West-East Gas Pipeline project successfully.In this paper,exi...HTP practice,alloyed with low-carbon (less than 0.06%) and high-niobium (up to 0.11%),has been developed to produce large-wall X80 hot rolled strip for 2nd West-East Gas Pipeline project successfully.In this paper,existing status of niobium at different rolling stage,such as reheating,rough rolling and final product and strengthening effects have been presented and analyzed systematically.Some technological questions concerrned,such as the mixed grain occurred on the delay table,dynamic recrystallization during the finish rolling course,γ→αtransformation and final microstructure obtained at low coiling temperature,have been explored further.Analytical results presented increased recrystallization stop temperature due to high niobium contents can provide the requisite to remove waiting-temperature operation of transfer bar before finish rolling to ensure controlled effect of traditional low-temperature,which is benificial not only to production efficiency,but also to uniformity of austenite microstructure.Secondly,dynamic-recrystallization occurred during finish rolling may reduce the density of dislocation,but will better the grain gradient along the thickness because the dynamic recrystallization proceeds instantly,which is beneficial to reduce the appearance of separation of impact fracture.Finally,the lower coiling temperature than traditional TMCP practice,up to 300℃,is a key factor to obtain low-carbon bainite microstructure composed of acicular ferrite and small amount M/A component,which results in high strength and excellent low-temperature toughness.展开更多
文摘On July 4 2002, a project attracting world attention, i.e., the West-East Gas Pipeline Project was declared in full-scale commencement. The project will write history with its enormous social and economic benefits.
文摘The West East pipeline project attracted the attention from all over the world for its long distance, huge diameter, complex geographic conditions, and diversified welding techniques being applied.In this paper the detail welding process and procedures used in the project are discussed and the distinguished achievements on welding techniques of China pipeline construction are described.
文摘HTP practice,alloyed with low-carbon (less than 0.06%) and high-niobium (up to 0.11%),has been developed to produce large-wall X80 hot rolled strip for 2nd West-East Gas Pipeline project successfully.In this paper,existing status of niobium at different rolling stage,such as reheating,rough rolling and final product and strengthening effects have been presented and analyzed systematically.Some technological questions concerrned,such as the mixed grain occurred on the delay table,dynamic recrystallization during the finish rolling course,γ→αtransformation and final microstructure obtained at low coiling temperature,have been explored further.Analytical results presented increased recrystallization stop temperature due to high niobium contents can provide the requisite to remove waiting-temperature operation of transfer bar before finish rolling to ensure controlled effect of traditional low-temperature,which is benificial not only to production efficiency,but also to uniformity of austenite microstructure.Secondly,dynamic-recrystallization occurred during finish rolling may reduce the density of dislocation,but will better the grain gradient along the thickness because the dynamic recrystallization proceeds instantly,which is beneficial to reduce the appearance of separation of impact fracture.Finally,the lower coiling temperature than traditional TMCP practice,up to 300℃,is a key factor to obtain low-carbon bainite microstructure composed of acicular ferrite and small amount M/A component,which results in high strength and excellent low-temperature toughness.
