A three-dimensional (3-D) wheel-rail rolling contact model with a wheel fiat was built using commercial software Hypermesh, and the dynamic finite element simulation was conducted using LS-DYNA 3D/explicit code. Inf...A three-dimensional (3-D) wheel-rail rolling contact model with a wheel fiat was built using commercial software Hypermesh, and the dynamic finite element simulation was conducted using LS-DYNA 3D/explicit code. Influences of the train speed, flat length and axle load on the vertical wheel-rail impact response were discussed, respectively. The results show that the maximum vertical wheel-rail impact force induced by the wheel flat is higher than that generated by the perfect wheel, and these two dynamic impact forces are much greater than the static axle load. Besides, the maximum von Mises equivalent stress and maximum equivalent plastic strain are observed on the wheel-rail contact surface, and both of them as well as the maximum wheel-rail impact force are sensitive to train speed, fiat length and axle load.展开更多
To explore the impact of wheel-rail excitation on the dynamic performance of axle box bearings,a dynamic model of the high-speed train including axle box bearings is developed.Subsequently,the dynamic response charact...To explore the impact of wheel-rail excitation on the dynamic performance of axle box bearings,a dynamic model of the high-speed train including axle box bearings is developed.Subsequently,the dynamic response characteristics of the axle box bearing are examined.The investigation focuses on the acceleration characteristics of bearing vibration under excitation of track irregularities and wheel flats.In addition,experiments on both normal and faulty bearings are conducted separately,and the correctness of the model and some conclusions are verified.According to the research,track irregularity is unfavorable for bearing fault detection based on resonance demodulation.Under the same speed conditions,the acceleration peak of bearing is inversely proportional to the length of the wheel flat and directly proportional to its depth.The paper will contribute to a deeper understanding of the dynamic performance of axle box bearings.展开更多
Against the deficiencies of traditional time domain and frequency domain analysis in detecting wheel-rail (W-R) system hidden risks which wheel flats generate, the time-frequency characteristics of W-R shock caused ...Against the deficiencies of traditional time domain and frequency domain analysis in detecting wheel-rail (W-R) system hidden risks which wheel flats generate, the time-frequency characteristics of W-R shock caused by wheel flat are analyzed and the vehicle-rail dynamic model with wheel flat is investigated. The 10 degrees of freedom (DOF) vehicle model is built up. 90-DOF rail model is constructed. The wheel flat excitation model is built up. The vehicle-track coupling dynamic model including wheel flat excitation is set up through nonlinear Hertzian contact theory. The vertical accelerations of axle box are calculated at different speeds and flat sizes based on the vehicle-track coupling dynamic model with wheel flat. Frequency slice wavelet transform (FSWT) is employed to analyze time- frequency characteristics of axle box accelerations to detect the W-R noncontact risks, which the traditional time domain or frequency domain method does not analyze. The results show that the small flat size and high running speed lead to high frequency W-R impact. Large flat size and high running speed result in momentary loss of W-R contact, and there exist security risks between wheel and rail. The conclusion that the phase of axle box accelerations is same to W-R forces lays a theoretical foundation of monitoring W-R contact safety from axle box acceleration instead of traditional W-R force detection.展开更多
Non-pneumatic tire appears to have advantages over traditional pneumatic tire in terms of flat proof and maintenance free.A mechanical elastic wheel(MEW) with a non-pneumatic elastic outer ring which functions as air ...Non-pneumatic tire appears to have advantages over traditional pneumatic tire in terms of flat proof and maintenance free.A mechanical elastic wheel(MEW) with a non-pneumatic elastic outer ring which functions as air of pneumatic tire was presented.The structure of MEW was non-inflatable integrated configuration and the effect of hinges was accounted for only in tension. To establish finite element model of MEW, various nonlinear factors, such as geometrical nonlinearity, material nonlinearity and contact nonlinearity, were considered. Load characteristic test was conducted by tyre dynamic test-bed to obtain force-deflection curve. And the finite element model was validated through load characteristic test. Natural dynamic characteristics of the MEW and its influencing factors were investigated based on the finite element model. Simulation results show that the finite element model closely matched experimental wheel. The results also show that natural frequency is related to ground constraints, material properties, loads and torques. Influencing factors as above obviously affect the amplitude of mode of vibration, but have little effect on mode of vibration shape. The results can provide guidance for experiment research, structural optimization of MEW.展开更多
The purpose of this study is to develop a twin wheel creep-feed grinding machine using continuous dressing to machine precise axisymmetric turbine blades that have been difficult to machine using a conventional creep-...The purpose of this study is to develop a twin wheel creep-feed grinding machine using continuous dressing to machine precise axisymmetric turbine blades that have been difficult to machine using a conventional creep-feed machine.In order to develop such a machine,3D-modeling and machine simulations were performed and a twin wheel creep-feed grinding machine was manufactured.Furthermore,the axisymmetric precision of the machined workpieces through practical machining was evaluated and the quality of the continuous dressing effect of the developed machine was established.In addition,experimental considerations for a proper dresser-to-wheel speed ratio and proper feed rate of the dresser were carried out.As a result,a twin wheel creep-feed grinding machine with continuous dressing is developed through machine simulation,manufacturing and performance evaluation.Optimum condition for the dresser feed rate is 0.3μm/rev.In cases of large dressor-to-wheel speed ratio,grinding efficiency can be enhanced,but the surface roughness shows a conflicting trend.Developed twin wheel creep-feed grinding machine has satisfactory appraisal with regard to surface roughness,flatness,and parallelism.Satisfactory surface roughness below 0.1μm can be obtained for the blade of aircraft.However,in order to perform precise machining,it is necessary to improve the structure of the twin wheel creep-feed grinding machine.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 51475392)the Fundamental Research Funds for the Central Universities (Grant No. 2682015RC09)the Research Fund of State Key Laboratory of Traction Power (Grant No. 2015TPL_T02)
文摘A three-dimensional (3-D) wheel-rail rolling contact model with a wheel fiat was built using commercial software Hypermesh, and the dynamic finite element simulation was conducted using LS-DYNA 3D/explicit code. Influences of the train speed, flat length and axle load on the vertical wheel-rail impact response were discussed, respectively. The results show that the maximum vertical wheel-rail impact force induced by the wheel flat is higher than that generated by the perfect wheel, and these two dynamic impact forces are much greater than the static axle load. Besides, the maximum von Mises equivalent stress and maximum equivalent plastic strain are observed on the wheel-rail contact surface, and both of them as well as the maximum wheel-rail impact force are sensitive to train speed, fiat length and axle load.
基金Project supported by the National Natural Science Foundation of China(Nos.12393780,1203201712002221)+3 种基金the Key Scientific Research Projects of China Railway Group(No.N2021J032)the College Education Scientific Research Project in Hebei Province of China(No.JZX2024006)the S&T Program in Hebei of China(No.21567622H)the Research Project of Hebei Province Science and Technology(No.QN2023071)。
文摘To explore the impact of wheel-rail excitation on the dynamic performance of axle box bearings,a dynamic model of the high-speed train including axle box bearings is developed.Subsequently,the dynamic response characteristics of the axle box bearing are examined.The investigation focuses on the acceleration characteristics of bearing vibration under excitation of track irregularities and wheel flats.In addition,experiments on both normal and faulty bearings are conducted separately,and the correctness of the model and some conclusions are verified.According to the research,track irregularity is unfavorable for bearing fault detection based on resonance demodulation.Under the same speed conditions,the acceleration peak of bearing is inversely proportional to the length of the wheel flat and directly proportional to its depth.The paper will contribute to a deeper understanding of the dynamic performance of axle box bearings.
基金supported by the National Natural Science Foundation of China(No.51305358,61134002)
文摘Against the deficiencies of traditional time domain and frequency domain analysis in detecting wheel-rail (W-R) system hidden risks which wheel flats generate, the time-frequency characteristics of W-R shock caused by wheel flat are analyzed and the vehicle-rail dynamic model with wheel flat is investigated. The 10 degrees of freedom (DOF) vehicle model is built up. 90-DOF rail model is constructed. The wheel flat excitation model is built up. The vehicle-track coupling dynamic model including wheel flat excitation is set up through nonlinear Hertzian contact theory. The vertical accelerations of axle box are calculated at different speeds and flat sizes based on the vehicle-track coupling dynamic model with wheel flat. Frequency slice wavelet transform (FSWT) is employed to analyze time- frequency characteristics of axle box accelerations to detect the W-R noncontact risks, which the traditional time domain or frequency domain method does not analyze. The results show that the small flat size and high running speed lead to high frequency W-R impact. Large flat size and high running speed result in momentary loss of W-R contact, and there exist security risks between wheel and rail. The conclusion that the phase of axle box accelerations is same to W-R forces lays a theoretical foundation of monitoring W-R contact safety from axle box acceleration instead of traditional W-R force detection.
基金Project(NHA13002)supported by Explore Research Project of the General Armament Department,ChinaProject(11072106)supported by the National Natural Science Foundation of China
文摘Non-pneumatic tire appears to have advantages over traditional pneumatic tire in terms of flat proof and maintenance free.A mechanical elastic wheel(MEW) with a non-pneumatic elastic outer ring which functions as air of pneumatic tire was presented.The structure of MEW was non-inflatable integrated configuration and the effect of hinges was accounted for only in tension. To establish finite element model of MEW, various nonlinear factors, such as geometrical nonlinearity, material nonlinearity and contact nonlinearity, were considered. Load characteristic test was conducted by tyre dynamic test-bed to obtain force-deflection curve. And the finite element model was validated through load characteristic test. Natural dynamic characteristics of the MEW and its influencing factors were investigated based on the finite element model. Simulation results show that the finite element model closely matched experimental wheel. The results also show that natural frequency is related to ground constraints, material properties, loads and torques. Influencing factors as above obviously affect the amplitude of mode of vibration, but have little effect on mode of vibration shape. The results can provide guidance for experiment research, structural optimization of MEW.
基金Work supported by the Second Stage of Brain Korea 21 Project
文摘The purpose of this study is to develop a twin wheel creep-feed grinding machine using continuous dressing to machine precise axisymmetric turbine blades that have been difficult to machine using a conventional creep-feed machine.In order to develop such a machine,3D-modeling and machine simulations were performed and a twin wheel creep-feed grinding machine was manufactured.Furthermore,the axisymmetric precision of the machined workpieces through practical machining was evaluated and the quality of the continuous dressing effect of the developed machine was established.In addition,experimental considerations for a proper dresser-to-wheel speed ratio and proper feed rate of the dresser were carried out.As a result,a twin wheel creep-feed grinding machine with continuous dressing is developed through machine simulation,manufacturing and performance evaluation.Optimum condition for the dresser feed rate is 0.3μm/rev.In cases of large dressor-to-wheel speed ratio,grinding efficiency can be enhanced,but the surface roughness shows a conflicting trend.Developed twin wheel creep-feed grinding machine has satisfactory appraisal with regard to surface roughness,flatness,and parallelism.Satisfactory surface roughness below 0.1μm can be obtained for the blade of aircraft.However,in order to perform precise machining,it is necessary to improve the structure of the twin wheel creep-feed grinding machine.