Fabrication of High Color Rendering Index White Light Emitting Diodes from Gold Nanoclusters

We demonstrated gold nanoclusters as color tunable emissive light converters for the application of white light emitting diodes (WLEDs). A blue LED providing 460 nm to excite gold nanoclusters mixed with UV curable material generates broad bandwidth emission at the visible range. Increasing the amount of gold nanoclusters, the correlated color temperature of WLEDs tuned from cold white to warm white, and also results in the variation of color rendering index (CRI). The highest CRI in the experiment is 92.

Temperature effects on photoluminescence of YAG:Ce^(3+) phosphor and performance in white light-emitting diodes

The well crystalline YAG：Ce^3＋ phosphor was synthesized by sold-state method, and the temperature dependence of excitation and emission spectra of YAG：Ce^3＋ phosphor were investigated in the temperature range from room temperature to 573 K. With temperature increasing, it was noted that the emission intensity of as-repared phosphors decreased considerably more rapidly when pumped by 460 nm than by 340 nm. The temperature-intensity curves under different excitation wavelengths were obtained using an Arrhenius function, and the corresponding activation energies were also obtained respectively. Thus, the experimental phenomenon was discussed in terms of nonradiative decay rate. The effects of as-prepared phosphors on the performance of the white LED with changing temperature were also studied.

A Novel White Light Emitting Long-lasting Phosphor

A novel white light emitting long-lasting phosphor Cd1-xDyxSiO3 is reported in this letter. The Dy3+ doped CdSiO3 phosphor emits white light. The phosphorescence can be seen with the naked eye in the dark clearly even after the 254 nm UV irradiation have been removed for about 30 min. In the emission spectrum of 5% Dy3+ doped CdSiO3 phosphor, there are two emission peaks of Dy3+, 580 nm (4F9/26H13/2) and 486 nm (4F9/26H15/2), as well as a broad band emission located at about 410 nm. All the three emissions form a white light with CIE chromaticity coordinates x=0.3874, y=0.3760 and the color temperature is 4000 K under 254 nm excitation. It indicated that this phosphor is a promising new luminescent material for practice application.

Luminescence characteristics of Eu^(3+) activated borate phosphor for white light emitting diode

In this paper, the Sr3Y2 （BO3）4 ：Eu^3＋ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613 nm corresponding to the electric dipole 5^Do-7^F2 transition of Eu^3＋ under 365 nm excitation, this is because Eu^3＋ substituted for Y^3＋ occupied the non-centrosymmetric position in the crystal structure of Sr3Y2（BO3）4. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet （254 nm, 365 nm and 400 nm） and blue （470 nm） light. The effect of Eu^3＋ concentration on the red emission of Sr3Y2（BO3）4 ：Eu^3＋ was measured, the result shows that the emission intensities increase with increasing Eu^3＋ concentration, then decrease. The Commission Internationale del＇Eclairage chromaticity （x, y） of Sr3Y2（BO3）4 ：Eu^3＋ phosphor is （0.640, 0.355） at 15 mol% Eu^3＋.

Structure and luminescence of Ca_2Si_5N_8:Eu^(2+) phosphor for warm white light-emitting diodes

We have synthesized Ca2Si5N8：Eu^2＋ phosphor through a solid-state reaction and investigated its structural and luminescent properties. Our Rietveld refinement of the crystal structure of Ca1.9Eu0.1Si5N8 reveals that Eu atoms substituting for Ca atoms occupy two crystallographic positions. Between 10 K and 300 K, Ca2Si5N8：Eu^2＋ phosphor shows a broad red emission band centred at -1.97 eV-2.01 eV. The gravity centre of the excitation band is located at 3.0 eV 3.31 eV. The centroid shift of the 5d levels of Eu^2＋ is determined to be -1.17 eV, and the red-shift of the lowest absorption band to be - 0.54 eV due to the crystal field splitting. We have analysed the temperature dependence of PL by using a configuration coordinate model. The Huang-Rhys parameter S = 6.0, the phonon energy hv = 52 meV, and the Stokes shift △S = 0.57 eV are obtained. The emission intensity maximum occurring at -200 K can be explained by a trapping effect. Both photoluminescence （PL） emission intensity and decay time decrease with temperature increasing beyond 200 K due to the non-radiative process.

A novel yellow phosphor for white light emitting diodes

This paper reports that a novel yellow phosphor, LiSrBO3：Eu2＋, was synthesized by the solid-state reaction. Thc excitation and emission spectra indicate that this phosphor can be effectively excited by ultraviolet （360 and 400 nm） and blue （425 and 460 nm） light, and exhibits a satisfactory yellow performance （565 nm）. The role of concentration of Eu2＋ on the emission intensity in LiSrBO3 is studied, and it is found that the critical concentration is 3 mol%, and the concentration self-quenching mechanism is the dipole-dipole interaction according to the Dexter theory. White light emitting diodes were generated by using an InGaN chip （460 nm or 400 nm） with LiSrBO3：Eu2＋ phosphor, the CIE chromaticity is （x = 0.341, y =0.321） and （x = 0.324, y = 0.318）, respectively. Therefore, LiSrBOa：Eu^2＋ is a promising yellow phosphor for white light emitting diodes.

Growth and properties of wide spectral white light emitting diodes

Wide spectral white light emitting diodes have been designed and grown on a sapphire substrate by using a metal-organic chemical vapor deposition system. Three quantum wells with blue-light-emitting, green-light-emitting and red-light-emitting structures were grown according to the design. The surface morphology of the film was observed by using atomic force microscopy. The films were characterized by their photoluminescence measurements. X-ray diffraction t9/2/9 scan spectroscopy was carried out on the multi-quantum wells. The secondary fringes of the symmetric ω/2θ X-ray diffraction scan peaks indicate that the thicknesses and the alloy compositions of the individual quantum wells are repeatable throughout the active region. The room temperature photoluminescence spectra of the structures indicate that the white light emission of the multi-quantum wells is obtained. The light spectrum covers 400 700 nm, which is almost the whole visible light spectrum.

Phosphor-free white light-emitting diodes

The multiple color-matching schemes that could improve the color rendering index for phosphor-free white LEDs are discussed. Then we review a few of the recent research directions for phosphor-free white LEDs, which include the development of monolithic GaN-based white LEDs and hybrid integrated GaN-based and A1GalnP-based white LEDs. These development paths will pave the way toward commercial application of phosphor-free white LEDs in the coming years.

Color-converted remote phosphor prototype of a multiwavelength excitable borosilicate glass for white light-emitting diodes

We report a unique red light-emitting Eu-doped borosilicate glass to convert color for warm white light-emitting diodes. This glass can be excited from 394 nm-peaked near ultraviolet light, 466 nm-peaked blue light, to 534 nm- peaked green light to emit the desired red light with an excellent transmission in the wavelength range of 400-700 nm which makes this glass suitable for color conversion without a great cost of luminous power loss. In particular, when assembling this glass for commercial white light-emitting diodes, the tested results show that the color rendering index is improved to 84 with a loss of luminous power by 12 percent at average, making this variety of glass promising for inorganic ＂remote-phosphor＂ color conversion.

Comparison of the autofluorescence bronchoscope and the white light bronchoscope in airway examination

Background and Objective: The sensitivity and accuracy of white light bronchoscopy (WLB) in airway examination are low. Autofluorescence bronchoscope (AFB) can determine early lesions in bronchial mucosa more sensitively, but it has seldom performed in China. To assess the clinical value of the AFB in airway examination, we compared the sensitivity and specificity of the AFB and WLB in detecting cancer of the airway mucosa. Methods: Between September 2009 and May 2010, bronchoscope examinations using both the AFB and WLB were performed on 136 patients, 95 men and 41 women with a median age of 61.5 years (ranged from 25 to 84 years). There were 46 lesions located in the central airway, 84 in the peripheral lung parenchyma, and 6 in the mediastinal region. All patients received local and general anesthesia and were subsequently examined with the WLB and AFB in tandem. All procedures were completed safely. Abnormal visual findings were recorded, and biopsies of the affected regions were collected for pathologic examination. Results: Of 241 regions sampled for biopsy, 76 sites contained malignant lesions, whereas 165 sites contained benign lesions. The AFB detected 72 of the 76 malignant lesions, but the WLB detected only 50. The sensitivities of the AFB and WLB were 94.7% and 65.8%, respectively, and the specificities were 57.0% and 83.6%, respectively. The negative predictive values of the AFB and WLB were 95.9% and 84.1%, respectively. Conclusions: The AFB is more sensitive than the WLB in detecting cancerous lesions in the mucosa, and is an effective airway examination.

Multicenter randomised controlled trial comparing the high definition white light endoscopy and the bright narrow band imaging for colon polyps

AIM To compare high definition white light endoscopy and bright narrow band imaging for colon polyps' detection rates. METHODS Patients were randomised to high definition white light endoscopy(HD-WLE) or the bright narrow band imaging(b NBI) during withdrawal of the colonoscope. Polyps identified in either mode were characterised using b NBI with dual focus(b NBI-DF) according to the Sano's classification. The primary outcome was to compare adenoma detection rates(ADRs) between the two arms. The secondary outcome was to assess the negative predictive value(NPV) in differentiating adenomas from hyperplastic polyps for diminutive rectosigmoid lesions.RESULTS A total of 1006 patients were randomised to HD-WLE(n = 511) or b NBI(n = 495). The mean of adenoma per patient was 1.62 and 1.84, respectively. The ADRs in b NBI and HD-WLE group were 37.4% and 39.3%, respectively. When adjusted for withdrawal time(OR = 1.19, 95%CI: 1.15-1.24, P < 0.001), the use of b NBI was associated with a reduced ADR(OR = 0.69, 95%CI: 0.52-0.92). Nine hundred and thirty three polyps(86%) in both arms were predicted with high confidence. The sensitivity(Sn), specificity(Sp), positive predictive value and NPV in differentiating adenomatous from non-adenomatous polyps of all sizes were 95.9%, 87.2%, 94.0% and 91.1% respectively. The NPV in differentiating an adenoma from hyperplastic polyp using b NBI-DF for diminutive rectal polyps was 91.0%.CONCLUSION ADRs did not differ between b NBI and HD-WLE, however HD-WLE had higher ADR after adjustment of withdrawal time. b NBI surpassed the PIVI threshold for diminutive polyps.

3D Displacement Measurement by White Light Digital Image Analysis in Frequency Domination Area

In this paper, white light digital image analysis in frequency domination area for measuring 3D displacement is put forward. The measuring system has the characteristics of whole-field, non-contact and omni-bearing measurement. It is simple and the coherent light is not demanded. Gray images before and after deformation are recorded using two CCDs at two different shooting angles, then digitalized and analyzed by frequency domination correlation arithmetic. The 2D displacement obtained is used to formulate 3D displacement via mathematical transformation. The experimental plate is 40,mm in length, 30,mm in width and 10 mm in height. The definite displacement is given using a 3D precise adjusting frame. The 3D displacement is calculated and compared with the definite displacement. The error is 4%-11% and the availability of this method was certified. Using this method, the compression deformation of a thin-wall cylinder with 140 mm in height, 64 mm in inner diameter and 64.6,mm in external diameter, was also measured. This method is proper to measure dynamic deformation.

Pure blue and white light electroluminescence in a multilayer organic light-emitting diode using a new blue emitter

We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.

The Comparison of Diagnostic Significance of Narrow Band Imaging in Contrast of White Light Endoscopy in the Assessment of Nasopharyngeal Cancer

Background: Narrow band imaging (NBI) is reported to improve the diagnostic importance of nasopharyngeal cancer. The purpose of this review was to evaluate the diagnostic significance of NBI in the literature and compare it to the conventional white light endoscopy. The use of narrow band imaging (NBI) and further technological achievements concerning the resolution and magnification of endoscopic images have in the past 15 years. With the use of NBI, superficial mucosal lesions, which may be missed by standard WLI endoscopy, can be identified easily by their neoangiogenic pattern. Objective:?To assess diagnostic value of the narrow band imaging and white light endoscopy in nasopharyngeal carcinoma and compare diagnostic values (sensitivity, specificity, positive predictive value and negative predictive value) with white light endoscopy. Search Methods: From 2010 to 2020, data was searched from electronic databases such as PubMed, web of science. We used narrow band imaging as a key word accordance with diagnostic modalities such as sensitivity, specificity, PPV and NPV and data were collected. Results: We have found mainly 6 studies have discussed about diagnostic value of endoscopy in nasopharyngeal carcinoma in the total of 2746 suspected patients. Among them, 5 studies have compared diagnostic values such as sensitivity, specificity, positive predictive value and negative predictive value between NBI and WLE. Among 5 studies, 4 studies have found higher sensitivity in NBI, 2 studies found higher 1 equal to WLE specificity in NBI. 3 studies have compared PPV and NPV between NBI and WLE. Among them, all the studies found higher PPV and NPV in NBI than WLE. Conclusion: Recently?developed narrow band imaging has a great significance in the diagnosis of nasopharyngeal carcinoma. Although NBI has also encountered some problem such as contact bleeding and darker image. So, further evaluation should be done.

Monolithic semi-polar(1■01) InGaN/GaN near white light-emitting diodes on micro-striped Si(100) substrate

The epitaxial growth of novel GaN-based light-emitting diode(LED)on Si(100)substrate has proved challenging.Here in this work,we investigate a monolithic phosphor-free semi-polar InGaN/GaN near white light-emitting diode,which is formed on a micro-striped Si(100)substrate by metal organic chemical vapor deposition.By controlling the size of micro-stripe,InGaN/GaN multiple quantum wells(MQWs)with different well widths are grown on semi-polar(11^-01)planes.Besides,indium-rich quantum dots are observed in InGaN wells by transmission electron microscopy,which is caused by indium phase separation.Due to the different widths of MQWs and indium phase separation,the indium content changes from the center to the side of the micro-stripe.Various indium content provides the wideband emission.This unique property allows the semipolar InGaN/GaN MQWs to emit wideband light,leading to the near white light emission.

Reflective Ladder Topology Network Based on White Light Fiber-Optic Mach-Zehnder Interferometer

In order to improve the multiplexing capability of the optical sensors based on the lower interferential optic fiber sensing technology and the white light fiber-optic Mach-Zehnder interferometer,reflective ladder topology network ( RLT) with tailored formula was proposed. The topology network consists of 6 rungs sensing elements linked by 5 couplers. Two cases with different choices of couplers were contrasted: one is equal coupling ratio,and the other is tailored coupling ratio. Through the simulation of these two cases,the detailed multiplexing capability was analyzed,and accordingly the experiments were also carried out. The simulation results showed that,the tailored formula enhances the multiplexing capability of the structure. In the first case, the maximum number of sensors which can be multiplexed is 8,and in the other case is 12 fiber optic sensors. The experimental results have a good agreement with numerical simulation results. Thus,it is considered expedient to incorporate RLT into large-scale building,grounds,bridges,dams,tunnels,highways and perimeter security.

Noise Reduction in White Light Lidar Signal Using a One-Dim and Two-Dim Daubechies Wavelet Shrinkage Method

A 1-D and 2-D Daubechies 5 (db5) discrete wavelet shrinkage methods using a 10 level decomposition was applied to white light lidar data particularly at 350 nm and 550 nm backscattered signal. At 350 nm, the backscattered signal is very weak as compared to 550 nm backscattered signal because of the spectral intensity distribution of the generated white light. The 1-D and 2-D wavelet shrinkage method gave a much better result as compared with the moving average method. However, the 2-D wavelet shrinkage method produced a much better denoised lidar signal compared with the 1-D wavelet shrinkage method. This is indicated by the 142% increase in correlation coefficient between the 2-D denoised lidar signal and the 800 nm original lidar signal as compared with only 12% increase in correlation coefficient for the 1-D denoised lidar signal. The 2-D wavelet shrinkage method also gave a much higher SNR value of 65.9 compared to 1-D which is 38.8.

Bismuth and Erbium Co-doped Optical Fiber for a White Light Fiber Source

We demonstrate a white light fiber source based on Bismuth and Erbium co-doped fiber and a single 830nm laser diode pump. The light spectral intensity from 1100 to 1570nm is over -45dBm, which provide ~40dB dynamic range for an OSA based spectral measurement.

Bright hybrid white light-emitting quantum dot device with direct charge injection into quantum dot

A bright white quantum dot light-emitting device （white-QLED） with 4-[4-（1-phenyl-lH-benzo[d]imidazol-2- yl）phenyl]-2- [3-（tri-phenylen-2-yl）phen-3-yl]quinazoline deposited on a thin film of mixed green/red-QDs as a bilayer emitter is fabricated. The optimized white-QLED exhibits a turn-on voltage of 3.2 V and a maximum brightness of 3660 cd/m2 @8 V with the Commission Internationale de l＇Eclairage （CIE） chromaticity in the region of white light. The ultra-thin layer of QDs is proved to be critical for the white light generation in the devices. Excitation mechanism in the white-QLEDs is investigated by the detailed analyses of electroluminescence （EL） spectral and the fluorescence lifetime of QDs. The results show that charge injection is a dominant mechanism of excitation in the white-QLED.

Fabrication of High-power White LEDs and White Light Uniformity Testing

As the blue and yellow lights are complementary colors, a blue InGaN LED chip is coated by a yellow phosphor film to generate white light based on luminescence conversion mechanism. The emitted light of a blue LED is used as the primary source for exciting fluorescent material such as cerium doped yttrium aluminum garnet with the formula Y3Al5O12∶Ce3+(in short: YAG∶Ce3+). The matching of the spectrum of the blue LED chips and the YAG∶Ce3+ yellow phosphor is studied to improve the conversion efficiency. The packaging methods and manufacturing processes for high-power single-chip-white-LEDs are introduced. The uniformity of the output white light is investigated. Based on the characteristics of the high-power white LEDs, some approaches and processes are suggested to improve the light uniformity when they are fabricated. The effectiveness of those approaches on the improvement of LEDs is discussed in detail and some interesting conclusions are also presented.