The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a geneti...The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.展开更多
A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental m...A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.展开更多
The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity...The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.展开更多
The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle ref...The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.展开更多
The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in th...The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in the western zone of the study region,being 35―48 thick.High-velocity structure zones exist in the upper crust shallower than 20 km beneath the Sulu and Dabie regions.The cause of high-velocity zones is attributable to high-pressure metamorphic(HPM) and ultra-high-pressure metamorphic(UHPM) terranes with high velocity and density exhuming up to the upper crust in the Sulu and Dabie orogenies.Anomalous zones of low velocity are in the lower crust,about 30 km beneath the Sulu and Dabie regions.The Moho discontinuity is as deep as 38 km beneath the Dabie region,deeper than those in the surrounding areas.The Moho discontinuity beneath the Sulu orogenic region is also a little deeper than those in its vicinity,being about 32 km.The deep Moho discontinuity zone implies that the low crustal velocity structure zone is in that region.The low-velocity characteristics in the lower crust are probably related to the remnant crustal root of the old mountains due to the orogeny in the Sulu and Dabie regions.The high-velocity anomalous zones in the upper crust and low-velocity anomalous zones in the lower crust beneath the Sulu region are all located northeast of the northern segment of the Tan-Lu fault.However,the high-and low-velocity anomalous zones beneath the Dabie region are located southwest of the southern segment of the Tan-Lu fault.Such a distribution of the velocity-anomalous zones looks to be attributable a left lateral slip motion along the Tan-Lu fault.The distribution pattern of the velocity-anomalous zones may show some evidence for the left strike-slip motion regime of the Tan-Lu fault.展开更多
The Mesozoic-Paleozoic marine residual basin in the South Yellow Sea(SYS) is a significant deep potential hydrocarbon reservoir. However, the imaging of the deep prospecting target is quite challenging due to the spec...The Mesozoic-Paleozoic marine residual basin in the South Yellow Sea(SYS) is a significant deep potential hydrocarbon reservoir. However, the imaging of the deep prospecting target is quite challenging due to the specific seismic-geological conditions. In the Central and Wunansha Uplifts, the penetration of the seismic wavefield is limited by the shallow high-velocity layers(HVLs) and the weak reflections in the deep carbonate rocks. With the conventional marine seismic acquisition technique, the deep weak reflection is difficult to image and identify. In this paper, we could confirm through numerical simulation that the combination of multi-level air-gun array and extended cable used in the seismic acquisition is crucial for improving the imaging quality. Based on the velocity model derived from the geological interpretation, we performed two-dimensional finite difference forward modeling. The numerical simulation results show that the use of the multi-level air-gun array can enhance low-frequency energy and that the wide-angle reflection received at far offsets of the extended cable has a higher signal-to-noise ratio(SNR) and higher energy. Therefore, we have demonstrated that the unconventional wide-angle seismic acquisition technique mentioned above could overcome the difficulty in imaging the deep weak reflectors of the SYS, and it may be useful for the design of practical seismic acquisition schemes in this region.展开更多
文摘The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.
基金supported by the Chinese Academy of Sciences (KZCX2-YW-132)the National Natural Sciences Foundation of China(40721003, 40830315)
文摘A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.
文摘The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.
文摘The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.
基金Supported partly by National Natural Science Foundation of China (Grant No.40674026)National Special Science Foundation of China (Grant No.200811037)
文摘The 3-D crustal structure of P-wave velocity in East China is studied based on the data obtained by wide-angle seismic reflection and refraction surveys.The results suggest that a deep Moho disconti-nuity exists in the western zone of the study region,being 35―48 thick.High-velocity structure zones exist in the upper crust shallower than 20 km beneath the Sulu and Dabie regions.The cause of high-velocity zones is attributable to high-pressure metamorphic(HPM) and ultra-high-pressure metamorphic(UHPM) terranes with high velocity and density exhuming up to the upper crust in the Sulu and Dabie orogenies.Anomalous zones of low velocity are in the lower crust,about 30 km beneath the Sulu and Dabie regions.The Moho discontinuity is as deep as 38 km beneath the Dabie region,deeper than those in the surrounding areas.The Moho discontinuity beneath the Sulu orogenic region is also a little deeper than those in its vicinity,being about 32 km.The deep Moho discontinuity zone implies that the low crustal velocity structure zone is in that region.The low-velocity characteristics in the lower crust are probably related to the remnant crustal root of the old mountains due to the orogeny in the Sulu and Dabie regions.The high-velocity anomalous zones in the upper crust and low-velocity anomalous zones in the lower crust beneath the Sulu region are all located northeast of the northern segment of the Tan-Lu fault.However,the high-and low-velocity anomalous zones beneath the Dabie region are located southwest of the southern segment of the Tan-Lu fault.Such a distribution of the velocity-anomalous zones looks to be attributable a left lateral slip motion along the Tan-Lu fault.The distribution pattern of the velocity-anomalous zones may show some evidence for the left strike-slip motion regime of the Tan-Lu fault.
基金supported by the National Hi-tech Research and Development Program of China (863 Program) (No. 2013AA092501)the open foundation of Key Laboratory of Marine Hydrocarbon Resources and Environmental Geology, Ministry of Land and Resources (No. MRE201303)the National Natural Science Foundation of China (Nos. 41176077, 41230318)
文摘The Mesozoic-Paleozoic marine residual basin in the South Yellow Sea(SYS) is a significant deep potential hydrocarbon reservoir. However, the imaging of the deep prospecting target is quite challenging due to the specific seismic-geological conditions. In the Central and Wunansha Uplifts, the penetration of the seismic wavefield is limited by the shallow high-velocity layers(HVLs) and the weak reflections in the deep carbonate rocks. With the conventional marine seismic acquisition technique, the deep weak reflection is difficult to image and identify. In this paper, we could confirm through numerical simulation that the combination of multi-level air-gun array and extended cable used in the seismic acquisition is crucial for improving the imaging quality. Based on the velocity model derived from the geological interpretation, we performed two-dimensional finite difference forward modeling. The numerical simulation results show that the use of the multi-level air-gun array can enhance low-frequency energy and that the wide-angle reflection received at far offsets of the extended cable has a higher signal-to-noise ratio(SNR) and higher energy. Therefore, we have demonstrated that the unconventional wide-angle seismic acquisition technique mentioned above could overcome the difficulty in imaging the deep weak reflectors of the SYS, and it may be useful for the design of practical seismic acquisition schemes in this region.
