In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. T...In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. The system has been successfully used in an 8 mm portable microwave radiometer scatterometer. Compared with other similar systems, the system modularization, miniaturization and intelligentization are improved so as to meet portable instrument requirements.展开更多
With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of eleme...With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.展开更多
Research for detecting or obtaining radionuclide by gamma energy spectrum data acquisition and process system is one of the key issues about intelligent measurement of gamma-ray spectrum. For this reason, a software a...Research for detecting or obtaining radionuclide by gamma energy spectrum data acquisition and process system is one of the key issues about intelligent measurement of gamma-ray spectrum. For this reason, a software and hardware implementation schematic design based on ARM ( Advanced RISC Machines) + DSP ( Digital Signal Processor) architecture for gamma energy spectrum data acquisition and processing system is proposed. The paper discusses in detail some key technologies such as communication interface design between microcontroller ARM and digital signal processor DSP,distribution scheduling under multi-task in the ARM-Linux,DSP handling procedures for multi-channel A / D high-speed sample. At the same time,because the traditional Gaussian fitting to determine the boundary of peak is not ideal,it puts forward a weighting factor of Gaussian function least squares fitting realize boundary determined. Finally gamma-spectrum data from sodium iodide NaI( TI) scintillation detector is tested and processed in the new system. The results show that gamma energy spectrum data acquisition and process system is perfect functionality, stable and convergence in unimodal. Compared with data from conventional energy spectrometers,the system can keep better energy resolution in a wide range of pulse pass rate.展开更多
Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projecti...Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projectis go- ing on,of which the research and activity keeps to the available method and technique in ADDS development and allows for the Chinese specific status in Antarctic data man- agementas well.Atpresent,authoring and submitting timely Antarctic data directory in China is one of the key issuesthatisto be dealtwith necessarily.This paper aims at studying the technical procedure in collecting,processing,examining and submitting data directory. In additional,italso discusses the efficient collection of data directory, which needs the effort of administrative and technical support.展开更多
Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifun...Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.展开更多
Considering the dependence and competitive relation-ship between traumatic failure and degradation,the reliability assessment of products based on competing failure analysis is studied.The hazard rate of traumatic fai...Considering the dependence and competitive relation-ship between traumatic failure and degradation,the reliability assessment of products based on competing failure analysis is studied.The hazard rate of traumatic failure is regarded as a Weibull distribution of the degradation performance,and the Wiener process is used to describe the degradation process.The parameters are estimated with the maximum likelihood estimation（MLE）method.A reliability model based on competing failure analysis is proposed.A case study of the GaAs lasers is given to validate the effectiveness of the model and its solving method.The results indicate that if only the degradation failure is considered,the estimated result will be comparably optimistic.Meanwhile,the correlation between the degradation and traumatic failure has a great influence on the accuracy of reliability assessment.展开更多
文摘In this paper we describe a system used to control,collect and process data in an 8 mm portable microwave radiometer scatterometer .We focus on hardware and software design of the system based on a PIC16F874 chip. The system has been successfully used in an 8 mm portable microwave radiometer scatterometer. Compared with other similar systems, the system modularization, miniaturization and intelligentization are improved so as to meet portable instrument requirements.
基金supported by National High-Tech R&D Program(863 Program),China(No.2013AA102402)
文摘With the development of Laser Induced Breakdown Spectroscopy （LIBS）, increasing numbers of researchers have begun to focus on problems of the application. We are not just satisfied with analyzing what kinds of elements are in the samples but are also eager to accomplish quantitative detection with LIBS. There are several means to improve the limit of detection and stability, which are important to quantitative detection, especially of trace elements, increasing the laser energy and the resolution of spectrometer, using dual pulse setup, vacuuming the ablation environment etc. All of these methods are about to update the hardware system, which is effective but expensive. So we establish the following spectrum data processing methods to improve the trace elements analysis in this paper： spectrum sifting, noise filtering, and peak fitting. There are small algorithms in these three method groups, which we will introduce in detail. Finally, we discuss how these methods affect the results of trace elements detection in an experiment to analyze the lead content in Chinese cabbage.
基金Sponsored by the Natural Science Fundation of Jiangxi Province(Grant No.20114BAB211026 and No.20122BA-B201028)Open Science Fund from Key Laboratory of Radioactive Geology and Exploration Technology Fundamental Science for National Defense,East China Institute of Technology(Grant No.2010RGET11)
文摘Research for detecting or obtaining radionuclide by gamma energy spectrum data acquisition and process system is one of the key issues about intelligent measurement of gamma-ray spectrum. For this reason, a software and hardware implementation schematic design based on ARM ( Advanced RISC Machines) + DSP ( Digital Signal Processor) architecture for gamma energy spectrum data acquisition and processing system is proposed. The paper discusses in detail some key technologies such as communication interface design between microcontroller ARM and digital signal processor DSP,distribution scheduling under multi-task in the ARM-Linux,DSP handling procedures for multi-channel A / D high-speed sample. At the same time,because the traditional Gaussian fitting to determine the boundary of peak is not ideal,it puts forward a weighting factor of Gaussian function least squares fitting realize boundary determined. Finally gamma-spectrum data from sodium iodide NaI( TI) scintillation detector is tested and processed in the new system. The results show that gamma energy spectrum data acquisition and process system is perfect functionality, stable and convergence in unimodal. Compared with data from conventional energy spectrometers,the system can keep better energy resolution in a wide range of pulse pass rate.
文摘Based on the general framework of ADDS( Antarctic Data Directory System) established by SCAR- COMNAP ad hoc Planning Group on Antarctic data management,the CN- ADDS( Chinese Antarctic Data Directory System) projectis go- ing on,of which the research and activity keeps to the available method and technique in ADDS development and allows for the Chinese specific status in Antarctic data man- agementas well.Atpresent,authoring and submitting timely Antarctic data directory in China is one of the key issuesthatisto be dealtwith necessarily.This paper aims at studying the technical procedure in collecting,processing,examining and submitting data directory. In additional,italso discusses the efficient collection of data directory, which needs the effort of administrative and technical support.
文摘Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.
基金supported by the Project supported by the Jiangsu Province Carbon Peak Carbon Neutral Technology Innovation Project in China(BE2022034)the Sinopec Science and Technology Research Project(No.P21079-3 and No.P22090)the Shengli Oilfi eld Company Science and Technology Research Project(No.YKS2201).
基金The National Natural Science Foundation of China(No.50405021)
文摘Considering the dependence and competitive relation-ship between traumatic failure and degradation,the reliability assessment of products based on competing failure analysis is studied.The hazard rate of traumatic failure is regarded as a Weibull distribution of the degradation performance,and the Wiener process is used to describe the degradation process.The parameters are estimated with the maximum likelihood estimation（MLE）method.A reliability model based on competing failure analysis is proposed.A case study of the GaAs lasers is given to validate the effectiveness of the model and its solving method.The results indicate that if only the degradation failure is considered,the estimated result will be comparably optimistic.Meanwhile,the correlation between the degradation and traumatic failure has a great influence on the accuracy of reliability assessment.
