Intelligent Wind Power Unit with Tandem Wind Rotors and Armatures （Optimization of Front Blade Profile）

The authors have invented the superior wind power unit, which is composed of the tandem wind rotors and the double rotational armature type generator without the traditional stator. The large-sized front wind rotor and the small-sized rear wind rotor drive, as for the upwind type, the inner and the outer rotational armatures, respectively, in keeping the rotational torque counter-balanced between both wind rotors/armatures. The unique rotational behaviors of the tandem wind rotors and the fundamental performances of the unit have been discussed at the previous paper. Continuously, this paper investigates experimentally and numerically the flow condition around the wind rotors to know the flow interactions between the front and the rear wind rotors, and optimizes the blade profile in the front wind rotor. The front blade should work fruitfully at the larger radius and had better not work at the smaller radius for giving plenty of wind energy to the rear wind rotor, taking account of the flow interaction between both wind rotors.

Experimental Study on Aerodynamic Characteristics of the Model Wind Rotor System and on Characterization of A Wind Generation System

In order to investigate the aerodynamic characteristics of 6-MW wind turbine, experimental study on the aerodynamic characteristics of the model rotor system and on characterization of a wind generation system is carried out. In the test, a thrust-matched rotor system and a geometry-matched rotor system, which utilize redesigned thrustmatched and original geometry-matched blades, respectively, are applied. The 6-MW wind turbine system is introduced briefly. The proper scaling laws for model tests are established in the paper, which are then implemented in the construction of a model wind turbine with optimally designed blades. And the parameters of the model are provided. The aerodynamic characteristics of the proposed 6-MW wind rotor system are explored by testing a 1:65.3 scale model at the State Key Laboratory of Ocean Engineering at Shanghai Jiao Tong University. Before carrying out the wind rotor system test, the turbulence intensity and spatial uniformity of the wind generation system are tested and results demonstrate that the characterization of the wind generation system is satisfied and the average turbulence intensity of less than 10% within the wind rotor plane is proved in the test. And then, the aerodynamic characteristics of 6-MW wind rotor system are investigated. The response characteristic differences between the thrust-matched rotor system and the geometry-matched rotor system are presented. Results indicate that the aerodynamic characteristics of 6-MW wind rotor with the thrust-matched rotor system are satisfied. The conclusion is that the thrust-matched rotor system can better reflect the characteristics of the prototype wind turbine. A set of model test method is proposed in the work and preparations for further model basin test of the 6-MW SPAR-type floating offshore wind turbine system are made.

Electromagnetic Design of a Switched Reluctance Motor With Segmental Rotors and Full-pitch Windings

整距绕组分块转子开关磁阻电机具有高速运行时低风（油）阻和低铁心损耗等优点，特别适合用于航天航空驱动系统。根据整距绕组分块转子开关磁阻电机的基本工作原理，结合输出功率与平均转矩的关系，将绕组电流等效为方波，推导出了整距绕组分块转子开关磁阻电机的主体尺寸计算公式；基于电机定转子未对齐位置和对齐位置的电磁特性，以及整距绕组分块转子开关磁阻电机的电磁特点，确定了定、转子极弧系数选取的规则；同时分析了绕组匝数等主要尺寸的选取的规则；最后，基于上述方法优化设计了一台实验样机，并通过有限元仿真及实验验证了整距绕组分块转子开关磁阻电机的电磁设计方法的正确性。

Acoustic Noise from Tandem Wind Rotors of Intelligent Wind Power Unit

The authors had invented the unique wind power unit composed of the large-sized front wind rotor,the small-sized rear wind rotor and the peculiar generator with the inner and the outer rotational armatures without the conventional stator.This unit is called "Intelligent Wind Power Unit" by the authors.The front and the rear wind rotors drive the inner and the outer armatures,respectively,while the rotational torque is counter-balanced between both armatures/wind rotors.This paper discusses experimentally the acoustic noise from the front and the rear wind rotors.The acoustic noise,in the counter-rotating operation,is induced mainly from the flow interaction between both rotors,and has the dominant power spectrum density at the frequency of the blade passing interaction.The noise is caused mainly from the turbulent fluctuation due to the flow separation on the blade,when the rear wind rotor stops or rotates in the same direction as the front wind rotor.

Calculation of torque and speed of induction machines under rotor winding faults

Based on the multi-loop method, the rotating torque and speed of theinduction machine are analyzed. The fluctuating components of the torque and speed caused by rotorwinding faults are studied. The models for calculating the fluctuating components are put forward.Simulation and computation results show that the rotor winding faults will cause electromagnetictorque and rotating speed to fluctuate; and fluctuating frequencies are the same and their magnitudewill increase with the rise of the severity of the faults. The load inertia affects the torque andspeed fluctuation, with the increase of inertia, the fluctuation of the torque will rise, while thecorresponding speed fluctuation will obviously decline.

GENERATOR VIBRATION FAULT DIAGNOSIS METHOD BASED ON ROTOR VIBRATION AND STATOR WINDING PARALLEL BRANCHES CIRCULATING CURRENT CHARACTERISTICS

Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or imbalance fault, and the vibration of the second frequency will increase when the air-gap static eccentricity fault occurs. Next, the characteristics of the stator winding parallel branches circulating current are analyzed, which are that the second harmonics circulating current will increase when the rotor winding inter-turn short circuit fault occurs, and the fundamental circulating current will increase when the air-gap eccentricity fault occurs, neither being strongly affected by the imbalance fault. Considering the differences of the rotor vibration and circulating current characteristics caused by different rotor faults, a method of generator vibration fault diagnosis, based on rotor vibration and circulating current characteristics, is developed. Finally, the rotor vibration and circulating current of a type SDF-9 generator is measured in the laboratory to verify the theoretical analysis presented above.

Validation of the Actuator Line Model for Simulating Flows past Yawed Wind Turbine Rotors

The Actuator Line/Navier-Stokes model is validated against wind tunnel measurements for flows past the yawed MEXICO rotor and past the yawed NREL Phase VI rotor. The MEXICO rotor is operated at a rotational speed of 424 rpm, a pitch angle of ?2.3。, wind speeds of 10, 15, 24 m/s and yaw angles of 15。, 30。 and 45。. The computed loads as well as the velocity field behind the yawed MEXICO rotor are compared to the detailed pressure and PIV measurements which were carried out in the EU funded MEXICO project. For the NREL Phase VI rotor, computations were carried out at a rotational speed of 90.2 rpm, a pitch angle of 3。, a wind speed of 5 m/s and yaw angles of 10。and 30。. The computed loads are compared to the loads measured from pressure measurement.

Weak Fault Detection of Rotor Winding Inter-Turn Short Circuit in Excitation System Based on Residual Interval Observer

Aiming at the fact that the rotor winding inter-turn weak faults can hardly be detected due to the strong electromagnetic coupling effect in the excitation system,an interval observer based on current residual is designed.Firstly,the mechanism of the inter-turn short circuit of the rotor winding in the excitation system is modeled under the premise of stable working conditions,and electromagnetic decoupling and system simplification are carried out through Park Transform.An interval observer is designed based on the current residual in the two-phase coordinate system,and the sensitive and stable conditions of the observer is preset.The fault diagnosis process based on the interval observer is formulated,and the observer gain matrix is convexly optimized by linear matrix inequality.The numerical simulation and experimental results show that the inter-turn short circuit weak fault is hardly detected directly through the current signal,but the fault is quickly and accurately diagnosed through the residual internal observer.Compared with the traditional fault diagnosis method based on excitation current,the diagnosis speed and accuracy are greatly improved,and the probability of misdiagnosis also decreases.This method provides a theoretical basis for weak fault identification of excitation systems,and is of great significance for the operation and maintenance of excitation systems.

Study of Local Structural Changes on Air Cooling at the End of Rotor Windings for Variable Speed Pumped Storage Generator-Motor

The shrink fit retaining ring is currently the easiest to install and the most widely used end fixed for structure AC excitation variable speed generator-motor rotor end windings.However,the current research on the effect of high strength sealing on the ventilation and heat dissipation performance of the end is not enough.In this paper,based on the actual structural parameters and periodic symmetry simplification,the three-dimensional coupled calculation model of fluid field and temperature field is established.After solving the fluid and thermal equations,the influence of the length of rotor support block,the height of rotor support block,and the number of rotor support block on the fluid flow and temperature distribution in the rotor end region of generator-motor is studied using the finite volume method.The rheological characteristics of the air in the rotor domain,such as velocity and inter-winding flow,are analyzed.The law of temperature variation with local structure in the computational domain is studied.The variation law of cooling medium performance inside the large variable speed power generator motor is revealed.

Fault Diagnosis Based on ANN for Turn-to-Turn Short Circuit of Synchronous Generator Rotor Windings

Rotor winding turn-to-turn short circuit is a common electrical fault in steam turbines. When turn-to-turn short circuit fault happens to rotor winding of the generator, the generator terminal parameters will change. According to these parameters, the conditions of the rotor winding can be reflected. However, it is hard to express the relations between fault information and generator terminal parameters in accurate mathematical formula. The satisfactory results in fault diagnosis can be obtained by the application of neural network. In general, the information about the severity level of the generator faults can be acquired directly when the faulty samples are found in the training samples of neural network. However, the faulty samples are difficult to acquire in practice. In this paper, the relations among active power, reactive power and excitation current are discovered by analyzing the generator mmf with terminal voltage constant. Depending on these relations, a novel diagnosis method of generator rotor winding turn-to-turn short circuit fault is proposed by using ANN method to obtain the fault samples directly, without destructive tests.

Creation and Development of Turbo-generators with Water-Cooled Stator and Rotor Windings in Shanghai Electrical Machinery Mfg Works

1. An Overview of Manufacture and Operation A turbine generator utilizing a new technology of electrical machinery industry, i.e. the windings of its stator and rotor all being inner water-cooled, was first successfully created in China and was known afterwards as a turbine generator with watercooled stator and rotor windings (Abbrev, TGWSR). The teachers from Zhejiang University came to Shanghai between

Computational Fluid Dynamics Analysis of Multi-Bladed Horizontal Axis Wind Turbine Rotor

The principal objective of this work was to investigate the 3D flow field around a multi-bladed horizontal axis wind turbine (HAWT) rotor and to investigate its performance characteristics. The aerodynamic performance of this novel rotor design was evaluated by means of a Computational Fluid Dynamics commercial package. The Reynolds Averaged Navier-Stokes (RANS) equations were selected to model the physics of the incompressible Newtonian fluid around the blades. The Shear Stress Transport (SST) k-ω turbulence model was chosen for the assessment of the 3D flow behavior as it had widely used in other HAWT studies. The pressure-based simulation was done on a model representing one-ninth of the rotor using a 40-degree periodicity in a single moving reference frame system. Analyzing the wake flow behavior over a wide range of wind speeds provided a clear vision of this novel rotor configuration. From the analysis, it was determined that the flow becomes accelerated in outer wake region downstream of the rotor and by placing a multi-bladed rotor with a larger diameter behind the forward rotor resulted in an acceleration of this wake flow which resulted in an increase the overall power output of the wind machine.

基于PSS／E Wind大型风电场并入输电网的动态特性研究

以PSS/E和风机软件包为平台,建立了基于滑差可调绕线式异步风电机组的恒速恒频风电场模型,并以CIGREB4-39风电场并网系统标准模型为例,研究了不同种风速扰动下的风电场动态特性,分析了对于不同容量、不同并网点风电场在不同种故障点扰动下保持稳定运行的能力。研究表明,扰动风速增量过大时,风电场振荡加剧;在一定容量范围内,大容量风电场表现出更强的抗扰动能力;同步发电机的调节作用对近区风电场稳定运行有明显改善的效果。

Investigation of Load Prediction on the Mexico Rotor Using the Technique of Determination of the Angle of Attack

Blade element moment（BEM） is a widely used technique for prediction of wind turbine aerodynamics performance,the reliability of airfoil data is an important factor to improve the prediction accuracy of aerodynamic loads and power using a BEM code.The method of determination of angle of attack on rotor blades developed by SHEN,et al is successfully used to extract airfoil data from experimental characteristics on the MEXICO（Model experiments in controlled conditions） rotor.Detailed surface pressure and particle image velocimetry（PIV） flow fields at different rotor azimuth positions are examined to determine the sectional airfoil data.The present technique uses simultaneously both PIV data and blade pressure data that include the actual flow conditions（for example,tunnel effects）,therefore it is more advantageous than other techniques which only use the blade loading（pressure data）.The extracted airfoil data are put into a BEM code,and the calculated axial and tangential forces are compared to both computations using BEM with Glauert＇s and SHEN＇s tip loss correction models and experimental data.The comparisons show that the present method of determination of angle of attack is correct,and the re-calculated forces have good agreements with the experiment.

Investigation on the Excitation Capacitor for a Wind Pumping Plant Using Induction Generator

This paper presents a SEIG-IM system using a self excited induction generator driven by wind turbine and supplying an induction motor which is coupled to a centrifugal pump. A method to describe the steady state performance based on nodal analysis is presented. Furthermore, a dynamic analysis and performance characteristics are examined. The pro-posed methodology is discussed in order to optimize the quantity of the pumped water. Therefore an optimal excitation capacitor for a given wind rotor speed is determined and a suitable operation mode of the system is established.

Criterion of aerodynamic performance of large-scale offshore horizontal axis wind turbines

With the background of offshore wind energy projects, this paper studies aerodynamic performance and geometric characteristics of large capacity wind turbine rotors （1 to 10 MW）, and the main characteristic parameters such as the rated wind speed, blade tip speed, and rotor solidity. We show that the essential criterion of a high- performance wind turbine is a highest possible annual usable energy pattern factor and a smallest possible dimension, capturing the maximum wind energy and producing the maximum annual power. The influence of the above-mentioned three parameters on the pattern factor and rotor geometry of wind turbine operated in China＇s offshore meteoro- logical environment is investigated. The variation patterns of aerodynamic and geometric parameters are obtained, analyzed, and compared with each other. The present method for aerodynamic analysis and its results can form a basis for evaluating aerodynamic performance of large-scale offshore wind turbine rotors.

Numerical Analysis of Horizontal-Axis Wind Turbine Characteristics in Yawed Conditions

Computational fluid dynamics (CFD) modeling and experiments have both advantages and disadvantages. Doing both can be complementary, and we can expect more effective understanding of the phenomenon. It is useful to utilize CFD as an efficient tool for the turbomachinery and can complement uncertain experimental results. However the CFD simulation takes a long time for a design in generally. It is need to reduce the calculation time for many design condi- tions. In this paper, it is attempted to obtain the more accurate characteristics of a wind turbine in yawed flow condi- tions for a short time, using a few grid points. It is discussed for the reliability of the experimental results and the CFD results.

宽转子极无轴承开关磁阻电机径向力模型全周期拓展

针对单绕组宽转子极无轴承开关磁阻电机在定转子极非完全交叠区间的径向悬浮力模型空白、已有定转子极完全交叠区间径向悬浮力模型推导过程复杂且计算量大的不足,首先通过磁场有限元分析,分别确定了该电机在定转子非完全交叠区间和完全交叠区间的电磁场几何分布,计算了气隙磁密,再根据麦克斯韦应力法分别推导了这2个区间的径向力表达式,从而建立该电机在一个完整周期范围内的径向力数学模型,并通过与三维有限元计算结果的对比验证该模型的准确性。相比于利用等效磁路图推导径向力模型而言,该建模过程更简便,计算量也更小。全周期径向力模型的建立,不仅能为电机本体和控制器设计提供理论参考,还有助于提高该电机控制策略设计的灵活性,也可以提高与传统单绕组无轴承电机控制器的通用性。

Design and Analysis of Different Types of Rotors for Pico-Turbine

Small-scale vertical axis wind turbine (VAWT) rotor is developed for use in areas lacking adequate energy infrastructure. The materials and methods of construction are selected to minimize cost as much as possible. The paper describes the design of different kinds of vertical axis wind turbine rotors having different number of blades and twist angle. The aim of the work is to study the influence of the different designs on rotational speed and power of rotor in different wind speed.

考虑激励幅值慢变的卷绕头转子系统动力学建模

卷绕头转子系统结构之间的耦合振动和时频变激励使振动问题十分复杂,为了更准确地研究其动力学特性,根据转子动力学理论,使用有限元方法建立了考虑多盘质量慢变的卷绕头非线性转子系统整机动力学模型,运用Newmark-β数值积分方法对其动力学特性求解,得到仅存在初始不平衡量以及卷装不良带来的激励频率、幅值慢变下的非线性动力学行为。通过分析轴心轨迹、时域波形和幅频特性曲线等结果,发现卷绕头转子系统对因卷装不良引起的激励幅值慢变较为敏感,出现新的频率成分。进一步对比分析了不同节点处的振动频谱,其结果可为卷绕头转子系统动力学设计和故障识别提供一定理论支持。