Winkler地基梁动力学系统的无量纲化与参数识别

为简化Winkler地基梁动力学系统的双参数识别计算,提出一种新无量纲方法,通过对系统时间、空间坐标进行线性变换,实现动力学方程系数的彻底归一化,得到与系统参数解耦的广义频率方程,发现频率、频率比仅由无量纲梁长决定的本质.提出基于频率比互等关系的双参数识别算法,该算法通过对广义频率方程进行一次求解即可在相应边界条件下得到频率、频率比关于无量纲梁长的预解集,在得到该系统任意两阶实测频率后,即可依托于时间、空间还原系数所建立的线性转换关系实现对双系统参数的定解.较之于传统双参数识别算法,该算法具有两个特点:(1)识别计算仅涉及单变量超越方程的求解与线性转换,避免了双参数超越方程组的非线性迭代问题,可使识别计算得到有效简化.(2)任意系统参数值的变化仅影响时空、空间还原系数的大小,预解集具有适用于系统参数值任意变化的一般性,可有效避免因系统参数值改变而导致重复迭代的情况,实现了解的一般化.

Symplectic system based analytical solution for bending of rectangular orthotropic plates on Winkler elastic foundation

This paper analyses the bending of rectangular orthotropic plates on a Winkler elastic foundation.Appropriate definition of symplectic inner product and symplectic space formed by generalized displacements establish dual variables and dual equations in the symplectic space.The operator matrix of the equation set is proven to be a Hamilton operator matrix.Separation of variables and eigenfunction expansion creates a basis for analyzing the bending of rectangular orthotropic plates on Winkler elastic foundation and obtaining solutions for plates having any boundary condition.There is discussion of symplectic eigenvalue problems of orthotropic plates under two typical boundary conditions,with opposite sides simply supported and opposite sides clamped.Transcendental equations of eigenvalues and symplectic eigenvectors in analytical form given.Analytical solutions using two examples are presented to show the use of the new methods described in this paper.To verify the accuracy and convergence,a fully simply supported plate that is fully and simply supported under uniformly distributed load is used to compare the classical Navier method,the Levy method and the new method.Results show that the new technique has good accuracy and better convergence speed than other methods,especially in relation to internal forces.A fully clamped rectangular plate on Winkler foundation is solved to validate application of the new methods,with solutions compared to those produced by the Galerkin method.

Temperature stress analysis for bi-modulus beam placed on Winkler foundation

The materials with different moduli in tension and compression are called bi-modulus materials. Graphene is such a kind of materials with the highest strength and the thinnest thickness. In this paper, the mechanical response of the bi-modulus beam subjected to the temperature effect and placed on the Winkler foundation is studied. The differential equations about the neutral axis position and undetermined parameters of the normal strain of the bi-modulus foundation beam are established. Then, the analytical expressions of the normal stress, bending moment, and displacement of the foundation beam are derived. Simultaneously, a calculation procedure based on the finite element method （FEM） is developed to obtain the temperature stress of the bi-modulus struc- tures. It is shown that the obtained bi-modulus solutions can recover the classical modulus solution, and the results obtained by the analytical expressions, the present FEM proce- dure, and the traditional FEM software are consistent, which verifies the accuracy and reliability of the present analytical model and procedure. Finally, the difference between the bi-modulus results and the classical same modulus results is discussed, and several reasonable suggestions for calculating and optimizing the certain bi-modulus member in practical engineering are presented.

Quasi-Green’s function method for free vibration of clamped thin plates on Winkler foundation

The quasi-Green＇s function method is used to solve the free vibration problem of clamped thin plates on the Winkler foundation. Quasi-Green＇s function is established by the fundamental solution and the boundary equation of the problem. The function satisfies the homogeneous boundary condition of tile problem. The mode-shape differential equation of the free vibration problem of clamped thin plates on the Winkler foundation is reduced to the Fredholm integral equation of the second kind by Green＇s formula. The irregularity of the kernel of the integral equation is overcome by choosing a suitable form of the normalized boundary equation. The numerical results show the high accuracy of the proposed method.

BENDING OF RECTANGULAR THIN PLATES WITH FREE EDGES LAID ON TENSIONLESS WINKLER FOUNDATION

In this paper, the bending problem of rectangular thin plates with free edges laid on tensionless Winkler foundation has been solved by employing Fourier series with supplementary terms. By assuming proper form of series for deflection, the basic differential equation with given boundary conditions can be transformed into a set of infinite algebraic equations. Because the boundary of contact region cannot bedetermined in advance, these equations are weak nonlinear ones. They can be solved by using iterative procedures.

集中力下的Winkler地基上双层弹塑性梁

为了完善弹性地基上弹塑性梁的理论基础,假设梁弯曲符合理想弹塑性模型,双层梁层间为竖向弹簧连接,根据受力平衡和本构关系建立Winkler地基上双层弹塑性梁的微分方程并给出通解.以无限长双层梁中心处作用集中荷载为例,研究同质同宽双层梁的加载全过程,分析梁厚、层间竖向模量等参数对梁极限承载力的影响.结果表明:当上、下层梁厚度相同或下层梁更薄时,不论层间竖向模量取多大都是上层梁先屈服;层间竖向模量趋近于无穷时,上下层梁的挠曲线相同,极限承载力趋近于双层叠合梁的极限承载力,此时结构退化成双层叠合梁;当层间竖向模量与地基反应模量之比大于5000时,上、下层梁竖向拉压变形对梁极限承载力的影响超过3%,应予以考虑,宜采用广义模量计入梁截面竖向拉压变形的影响.

有限深度介质上梁非线性能量汇减振的Winkler地基实现

土-结构相互作用对结构动力学特性的影响是一种具有非线性能量汇特征的效应。利用考虑土体质量的Winkler地基梁理论,将有限深度弹性介质等效为非线性能量汇系统的附加质量,建立简谐激励下弹性介质上简支梁系统的非线性动力学模型。采用Galerkin方法和增量谐波平衡法分析了弹性介质上简支梁的非线性动力响应。利用数值计算方法验证了理论结果的正确性,并分析了非线性能量汇的有效性。通过参数优化和分析,揭示了不同参数范围内Winkler地基的减振效果,讨论了其最佳参数范围。研究结果表明:在合理的参数范围内,弹性介质对其支承梁的动力响应有良好的抑制作用,能够快速有效地吸收共振条件下的振动能量,并具有良好的鲁棒性。优化后的非线性能量汇可使梁的共振幅值降低超95%,且具有较宽的减振频带。研究成果从非线性能量汇的角度展现了土-结构相互作用效应的减振机理,为基于弹性地基设计的结构振动抑制提供了理论依据。

VIBRATIONS OF STEPPED RECTANGULAR THIN PLATES ON WINKLER’S FOUNDATION

Differential equations of free/forc ed vibrations of stepped rectangular thin plates on Winkler's foundation are estab lished by using singular functions, and their general solutions are also solved for expression of vibration mode function and frequency equations on usual suppo rts derived with W operator, as well as forced responses of such plates unde r different_type loads disc ussed with Fourier expansion of generalized functions.

VIBRATIONS OF STEPPED ONE-WAY THIN RECTANGULAR PLATES SUBJECTED TO IN-PLANE TENSILE/ COMPRESSIVE FORCE IN Y-DIRECTION ON WINKLER'S FOUNDATION

Differential equations of free/forced vibrations of n_step one_way thin rectangular plates subjected to in_plane tensile/compressive force in y_direction on Winkler's foundation are established by using singular functions, their general solutions solved for, expression of vibration mode function and frequency equation on usual supports derived with W operator. Influence functions for various cases deduced here may also be used to solve problems of static buckling or stability for beams and plates in relevant circumstances.

VIBRATIONS OF ONE-WAY RECTANGULAR STEPPEDTHIN PLATES ON WINKLER'S FOUNDATION

Differential equations of free forced vibrations of one -way rectangular stepped thin plated on Winkler 's foundation are established by using singular functions ,their general solutions are solved :exprssion of vibration mode function and frequency equations on usual supports are derived from W operator :forced responses of such plates under different -type loads are discussed with generalized functions .

Winkler地基上边坡锚固框架设计计算的简明有限差分法

为克服现有Winkler地基上边坡锚固框架设计计算的有限差分法需假设框架在锚杆处截断的问题,通过建立受集中荷载作用的Winkler地基梁的挠曲微分方程,提出无需做截断处理的简明有限差分法。基于提出的差分方法,改进锚杆拉力在框架纵横梁上的分配与调整方法,并采用Matlab开发功能完善的程序。结果表明:有限差分数值解具有较高的计算精度,框架外伸段直接计算结果会出现负的土抗力,致使计算结果偏于不安全,可通过调整该段边界条件的方法予以消除,使最终计算结果更加可靠。本研究开发的差分程序对锚固框架整体设计提供了一种高效的计算方法。

BENDING PROBLEMS OF RECTANGULAR REISSNER PLATE WITH FREE EDGES LAID ON TENSIONLESS WINKLER FOUNDATIONS

In this paper, an analytical method for solving the bending problems of rectangular Reissner plate with free edges under arbitrary loads laid on tensionless Winkler foundations is proposed. By assuming proper form of Fourier series with supplementary terms, which meet derivable conditions, for deflection and shear force functions, the basic differential equations with given boundary conditions can be transformed into a set of simple infinite algebraic equations. For common Winkler foundations, this set of equations can be solved directly and for tensionless Winkler foundations, it is a set of weak nonlinear algebraic equations, the solution of which can be obtained easily by using iterative procedures.

Seabed structures and foundations related to deep-sea resource development:A review based on design and research

The deep‐sea ground contains a huge amount of energy and mineral resources,for example,oil,gas,and minerals.Various infrastructures such as floating structures,seabed structures,and foundations have been developed to exploit these resources.The seabed structures and foundations can be mainly classified into three types:subsea production structures,offshore pipelines,and anchors.This study reviewed the development,installation,and operation of these infrastructures,including their structures,design,installation,marine environment loads,and applications.On this basis,the research gaps and further research directions were explored through this literature review.First,different floating structures were briefly analyzed and reviewed to introduce the design requirements of the seabed structures and foundations.Second,the subsea production structures,including subsea manifolds and their foundations,were reviewed and discussed.Third,the basic characteristics and design methods of deep‐sea pipelines,including subsea pipelines and risers,were analyzed and reviewed.Finally,the installation and bearing capacity of deep‐sea subsea anchors and seabed trench influence on the anchor were reviewed.Through the review,it was found that marine environment conditions are the key inputs for any offshore structure design.The fabrication,installation,and operation of infrastructures should carefully consider the marine loads and geological conditions.Different structures have their own mechanical problems.The fatigue and stability of pipelines mainly depend on the soil‐structure interaction.Anchor selection should consider soil types and possible trench formation.These focuses and research gaps can provide a helpful guide on further research,installation,and operation of deep‐sea structures and foundations.

OptoGPT: A foundation model for inverse design in optical multilayer thin film structures

Optical multilayer thin film structures have been widely used in numerous photonic applications.However,existing inverse design methods have many drawbacks because they either fail to quickly adapt to different design targets,or are difficult to suit for different types of structures,e.g.,designing for different materials at each layer.These methods also cannot accommodate versatile design situations under different angles and polarizations.In addition,how to benefit practical fabrications and manufacturing has not been extensively considered yet.In this work,we introduce OptoGPT(Opto Generative Pretrained Transformer),a decoder-only transformer,to solve all these drawbacks and issues simultaneously.

Evolution and Prospects of Foundation Models: From Large Language Models to Large Multimodal Models

Since the 1950s,when the Turing Test was introduced,there has been notable progress in machine language intelligence.Language modeling,crucial for AI development,has evolved from statistical to neural models over the last two decades.Recently,transformer-based Pre-trained Language Models(PLM)have excelled in Natural Language Processing(NLP)tasks by leveraging large-scale training corpora.Increasing the scale of these models enhances performance significantly,introducing abilities like context learning that smaller models lack.The advancement in Large Language Models,exemplified by the development of ChatGPT,has made significant impacts both academically and industrially,capturing widespread societal interest.This survey provides an overview of the development and prospects from Large Language Models(LLM)to Large Multimodal Models(LMM).It first discusses the contributions and technological advancements of LLMs in the field of natural language processing,especially in text generation and language understanding.Then,it turns to the discussion of LMMs,which integrates various data modalities such as text,images,and sound,demonstrating advanced capabilities in understanding and generating cross-modal content,paving new pathways for the adaptability and flexibility of AI systems.Finally,the survey highlights the prospects of LMMs in terms of technological development and application potential,while also pointing out challenges in data integration,cross-modal understanding accuracy,providing a comprehensive perspective on the latest developments in this field.

Free-Form Laminated Doubly-Curved Shells and Panels of Revolution Resting on Winkler-Pasternak Elastic Foundations: A 2-D GDQ Solution for Static and Free Vibration Analysis

This work presents the static and dynamic analyses of laminated doubly-curved shells and panels of revolution resting on Winkler-Pasternak elastic foundations using the Generalized Differential Quadrature (GDQ) method. The analyses are worked out considering the First-order Shear Deformation Theory (FSDT) for the above mentioned moderately thick structural elements. The effect of the shell curvatures is included from the beginning of the theory formulation in the kinematic model. The solutions are given in terms of generalized displacement components of points lying on the middle surface of the shell. Simple Rational Bézier curves are used to define the meridian curve of the revolution structures. The discretization of the system by means of the GDQ technique leads to a standard linear problem for the static analysis and to a standard linear eigenvalue problem for the dynamic analysis. Comparisons between the present formulation and the Reissner-Mindlin theory are presented. Furthermore, GDQ results are compared with those obtained by using commercial programs. Very good agreement is observed. Finally, new results are presented in order to investtigate the effects of the Winkler modulus, the Pasternak modulus and the inertia of the elastic foundation on the behavior of laminated shells of revolution.

Forced Vibration Analysis of Functionally Graded Anisotropic Nanoplates Resting on Winkler/Pasternak-Foundation

This study investigates the forced vibration of functionally graded hexagonal nano-size plates for the first time.A quasi-three-dimensional(3D)plate theory including stretching effect is used to model the anisotropic plate as a continuum one where small-scale effects are considered based on nonlocal strain gradient theory.Also,the plate is assumed on a Pasternak foundation in which normal and transverse shear loads are taken into account.The governing equations of motion are obtained via the Hamiltonian principles which are solved using analytical based methods by means of Navier’s approximation.The influences of the exponential factor,nonlocal parameter,strain gradient parameter,Pasternak foundation coefficients,length-to-thickness,and length-to-width ratios on the dynamic response of the nanoplates are examined.In addition,the accuracy of an isotropic approximate instead of the anisotropic model is studied.The dynamic behavior of the system shows that mechanical mathematics-based models may get better results considering the anisotropic model because the dynamic response can cause prominent differences(up to 17%)between isotropic approximation and anisotropic model.

Unified two-phase nonlocal formulation for vibration of functionally graded beams resting on nonlocal viscoelastic Winkler-Pasternak foundation

A nonlocal study of the vibration responses of functionally graded(FG)beams supported by a viscoelastic Winkler-Pasternak foundation is presented.The damping responses of both the Winkler and Pasternak layers of the foundation are considered in the formulation,which were not considered in most literature on this subject,and the bending deformation of the beams and the elastic and damping responses of the foundation as nonlocal by uniting the equivalently differential formulation of well-posed strain-driven(ε-D)and stress-driven(σ-D)two-phase local/nonlocal integral models with constitutive constraints are comprehensively considered,which can address both the stiffness softening and toughing effects due to scale reduction.The generalized differential quadrature method(GDQM)is used to solve the complex eigenvalue problem.After verifying the solution procedure,a series of benchmark results for the vibration frequency of different bounded FG beams supported by the foundation are obtained.Subsequently,the effects of the nonlocality of the foundation on the undamped/damping vibration frequency of the beams are examined.

Centrifuge modeling of a large-scale surcharge on adjacent foundation

This study investigates the ground and structural response of adjacent raft foundations induced by largescale surcharge by ore in soft soil areas through a 130g centrifuge modeling test with an innovative layered loading device.The prototype of the test is a coastal iron ore yard with a natural foundation of deep soft soil.Therefore,it is necessary to adopt some measures to reduce the influence of the large-scale surcharge on the adjacent raft foundation,such as installing stone columns for foundation treatment.Under an acceleration of 130 g,the model conducts similar simulations of iron ore,stone columns,and raft foundation structures.The tested soil mass has dimensions of 900 mm×700 mm×300 mm(lengthwidthdepth),which is remodeled from the soil extracted from the drilling holes.The test conditions are consistent with the actual engineering conditions and the effects of four-level loading conditions on the composite foundation of stone columns,unreinforced zone,and raft foundations are studied.An automatic layer-by-layer loading device was innovatively developed to simulate the loading process of actual engineering more realistically.The composite foundation of stone columns had a large settlement after the loading,forming an obvious settlement trough and causing the surface of the unreinforced zone to rise.The 12 m surcharge loading causes a horizontal displacement of 13.19 cm and a vertical settlement of 1.37 m in the raft foundation.The stone columns located on both sides of the unreinforced zone suffered significant shear damage at the sand-mud interface.Due to the reinforcement effect of stone columns,the sand layer below the top of the stone columns moves less.Meanwhile,the horizontal earth pressure in the raft foundation zone increases slowly.The stone columns will form new drainage channels and accelerate the dissipation of excess pore pressure.

Bending the Foundation Beam on Elastic Base by Two Reaction Coefficient of Winkler’s Subgrade

A new method for analysis of counter beams is presented in the paper. The analysis has taken into account their stiffness EI, Winkler’s space with modulus of subgrade reaction k and equality deformities of the foundation beam with the ground. The solution is found by using the numerical analysis of the Winkler’s model, with variation of different moduli of the subgrade reaction k2 outside the force zone r, while under the force P exists the modulus of the subgrade reaction k, up to the definition of minimum bending moments. The exponential function k2(r), as the geometric position of the minimum moments is approximately assumed. From the potential energy conditions of the reciprocity of displacement and reaction, the width of the zone r and the modulus of the subgrade reaction k2 are explicitly determined, introducing in the calculation initial and calculation soil displacement wsi successively. At the end of the paper, it presented numerical example in which the influence of k and k2 values on bending moments of the counter beam is analyzed. The essential idea of this paper is to decrease the quantity of the reinforcement in the foundations, beams, i.e. to obtain a cost-efficient foundation construction.