A novel Wireless Fidelity (WiFi) over fiber link and a wavelength assignment protocol are proposed to provide sufficient bandwidth and extensive coverage range for the various applications in the Internet of Things (I...A novel Wireless Fidelity (WiFi) over fiber link and a wavelength assignment protocol are proposed to provide sufficient bandwidth and extensive coverage range for the various applications in the Internet of Things (IoT).The performance of the WiFi over fiber-based wireless IoT network is evaluated in terms of error vector magnitude (EVM) and data throughput for both the up and down links between the WiFi central control system and remote radio units (RRUs).The experimental results illustrate the reliability of the fiber transmission of 64 Quadrature Amplitude Modulation (64QAM) WiFi signals by direct analog modulation.In order to efficiently utilize the wavelength resources,we also demonstrated the wavelength assignment protocol by employing optical switching configurations in Central Station (CS) to realize the wavelength switching,and the simulation results indicate the queuing size and the corresponding queue delay for different numbers of available wavelengths.展开更多
This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Div...This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Division Multiplexing(DSSSOFDM)and Extended Rate PhysicalsOrthogonal Frequency Division Multiplexing(ERP-OFDM)physical layers using basic access mode,Request to Send/Clear to Send(RTS/CTS)and CTS-to-self mechanisms.The results show that IEEE 802.11g-over-fiber network employing the ERP-OFDM physical layer is much more efficient than that employing the DSSS-OFDM physical layer,with regards to both throughput and delay.For a given maximum throughput/minimum delay,the tradeoff among the access mechanism,the fiber length,and the payload size must be considered.Our quantified results give a selection basis for the operators to quickly select suitable IEEE 802.11g physical layers and the different access mechanisms,and accurately predict the data throughput and delay given the specific parameters.展开更多
基金supported in part by the Innovation and Technology Support Programme(ITSP)of the Innovation and Technology Commission(ITS/210/19)in part by the Young Scientists Fund of the National Natural Science Foundation of China(62001409)+1 种基金in part by Shenzhen-Hong Kong-Macao Science and Technology Project(Category C)(SGDX20210823104002018)in part by 2022 Guangdong-Hong Kong-Macao Joint Innovation Funding Scheme(2022A0505030021).
基金supported by the National Natural Science Foundation of China (Nos.60702006,60736002,60837004,60736036,60932004and61001121)the MOST International Cooperation Program(No.2008DFA11670)+1 种基金the 111 Project(No.B07005)the project funded by State Key Laboratory of AOCSN,China
文摘A novel Wireless Fidelity (WiFi) over fiber link and a wavelength assignment protocol are proposed to provide sufficient bandwidth and extensive coverage range for the various applications in the Internet of Things (IoT).The performance of the WiFi over fiber-based wireless IoT network is evaluated in terms of error vector magnitude (EVM) and data throughput for both the up and down links between the WiFi central control system and remote radio units (RRUs).The experimental results illustrate the reliability of the fiber transmission of 64 Quadrature Amplitude Modulation (64QAM) WiFi signals by direct analog modulation.In order to efficiently utilize the wavelength resources,we also demonstrated the wavelength assignment protocol by employing optical switching configurations in Central Station (CS) to realize the wavelength switching,and the simulation results indicate the queuing size and the corresponding queue delay for different numbers of available wavelengths.
基金supported in part by the National Basic Research Program of China under Grant No. 2012CB315705 (973 program)National Natural Science Foundation of China under Grants No.61107058, No.61120106001, No.60932004, No.61001121, No.60837004+2 种基金National High-Tech Research and Development Program of China under Grant No.2011AA010306 (863 program)Beijing Excellent Doctoral Thesis Project under Grant No.YB20101001301Cooperation Project between Province and Ministries under Grant No.2011A090200025
文摘This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Division Multiplexing(DSSSOFDM)and Extended Rate PhysicalsOrthogonal Frequency Division Multiplexing(ERP-OFDM)physical layers using basic access mode,Request to Send/Clear to Send(RTS/CTS)and CTS-to-self mechanisms.The results show that IEEE 802.11g-over-fiber network employing the ERP-OFDM physical layer is much more efficient than that employing the DSSS-OFDM physical layer,with regards to both throughput and delay.For a given maximum throughput/minimum delay,the tradeoff among the access mechanism,the fiber length,and the payload size must be considered.Our quantified results give a selection basis for the operators to quickly select suitable IEEE 802.11g physical layers and the different access mechanisms,and accurately predict the data throughput and delay given the specific parameters.
