Wireless Mesh Networks and Cooperative Relaying Technologies

The Wireless Mesh Network (WMN) has become a focus in research of wireless broadband communications . In a switching technologies - based wireless Mesh network, the entire network is regarded as an IP subnet, so it cannot be applied in situations where large coverage is required . The use of cooperative relaying technologies can improve the transmission rate and reliability of wireless link; while the wireless Mesh network, once integrated with cooperative relaying technologies and routing technologies , can improve its spectrum efficiency and cover a wide area . However, there are many problems to be solved with respect to standardization, key technologies research and industrialization. Therefore , the application of cooperative relaying technologies in wireless Mesh networks is still a great challenge .

Scalability Technologies for Wireless Mesh Networks

The continuous increase of data transmission density in wireless mobile communications has posed a challenge to the system performance of Wireless Mesh Networks (WMNs ). There is a rule for wireless Ad hoc networks that the average node capacity decreases while the number of nodes increases , so it is hard to establish a large - scale wireless Mesh network. Network scalability is very important for enhancing the adaptive networking capability of the wireless Mesh network. This article discusses key scalability technologies for Mesh Base Stations (BSs ) and Mesh Mobile Stations (MSs ), such as channel allocation, intelligent routing , multi- antenna , node classification, Quality of Service (QoS) differentiation and cooperative transmission.

Wireless Mesh Network and IEEE 802 Standards

Although the wireless broadband access system is developing rapidly, its development is limited due to some disadvantages , such as small capacity of bandwidth and small coverage . The Wireless Mesh Network (WMN) is one of the important technologies for 'last mile 'broadband wireless access . The WMN can integrate with multiple wireless systems , such as Wireless Local Area Network (WLAN), Wireless Personal Area Network (WPAN), and Wireless Metropolitan Area Network (WMAN), to improve the performance of the wireless network and enlarge the coverage range . With the wide applications of the WMN, the IEEE 802 standard group is devoted to promoting the development of the WMN technology and establishing the related technical standards . At present, WMN standards have appeared in IEEE 802.11s , 802.15, 802.16, and 802.20.

Wireless Cooperative Mesh Network:A New Architecture for Network Convergence

The convergence of heterogeneous wireless networks is a trend in the evolution of wireless networks.A new architecture for network convergence,named Wireless Cooperative Mesh Network,is proposed to solve such emerging problems in convergence as transmission mode selection,load balancing,routing and handover.The new architecture is based on the structure of Wireless Mesh Networks(WMNs),and cooperative communication is also employed to further optimize its structure and upgrade its performance.It can thus obtain advantages of both the Mesh technology(high spectrum efficiency and dynamic self-organization) and cooperative communication(high diversity gain and high energy efficiency).The new architecture serves as an efficient solution for wireless network convergence.

Wireless Mesh Technology and Network

Wireless Mesh Network (WMN) has been actively researched and developed as a new network technology to support broadband high- speed multimedia services . This paper discusses WMN technology and applications , and introduces the basic technologies , typical applications and current development of the WMN. With the future development of wireless distribution technology and network, wireless Mesh technology and network will become the key networking technology and architecture of wireless mobile communications , and will be widely used in various wireless networks with more important roles .

Key Technologies of Wireless Mesh Network

The Wireless Mesh Network (WMN) is a special kind of Ad hoc network with a hierarchical network structure . Its backbone transmission network has such characteristics as multi- hop , topology stability, no electricity supply constraints , convergence of flows . Improving the spatial reuse of spectrum is an effective approach to increase network capacity. The linchpin of this approach is to effectively control the interference range between wireless links . The multi- channel networking technology is one of the key technologies of WMN, and its core is the channel allocation through which the channel utilization can be maximized . The mutual interference between multi- hop wireless links should be considered when choosing the routing metrics in WMN. Through the load - balancing routing method , the network capacity and throughput of nodes can be improved .

IEEE 802.11s Wireless Mesh Networks for Last-Mile Internet Access: An Open-Source Real-World Indoor Testbed Implementation

Due to their easy-to-deploy and self-healing features, WMNs (Wireless Mesh Networks) are emerging as a new promising technology with a rich set of applications. While the IEEE standardization of this new technology is still in progress, its main traits are already set, e.g., architecture and MAC routing. WMNs are attracting considerable research in academia and industry as well, but the lack of open-source testbeds is restricting such a research to simulation tools. The main problem with simulation tools is that they do not reflect the complexity of RF propagation, especially in indoor environments, of which IEEE 802.11s WMNs are an example. This paper presents an open-source implementation of an indoor IEEE 802.11s WMN testbed. The implementation is transparent, easy-to-deploy, and both the source code and deployment instructions are available online. The implementation can serve as a blueprint for the WMN research community to deploy their own testbeds, negating the shortcomings of using simulation tools. By delving into the testbed implementation subtleties, this paper is shedding further light on the details of the ongoing IEEE 802.11s standard. Major encountered implementation problems (e.g., clients association, Internetworking, and supporting multiple gateways) are identified and addressed. To ascertain the functionality of the testbed, both UDP and TCP traffic are supported and operational. The testbed uses the default IEEE 802.11s HWMP (Hybrid Wireless Mesh Protocol) routing protocol along with the default IEEE 802.11s Airtime routing metric.

AN ADAPTIVE OPPORTUNISTIC RETRANSMISSION CONTROL SCHEME ENVIRONMENT-AWARE-BASED FOR WIRELESS MULTIMEDIA MESH NETWORKS

In this paper, we propose an aware-based adaptive opportunistic retransmission control scheme for wireless multimedia Mesh networks. The proposed scheme provides maximum retransmis-sion count optimization based on environment-aware to improve packet relay probability. The scheme discriminates the types of packet loss in wireless link by means of environment information and selects the retransmission count by taking the IEEE 802.11 wireless channel characteristics into consideration. Furthermore, the maximum retransmission count of MAC is adjusted adaptively. Extensive simulations demonstrate that the proposed scheme significantly reduces packet collision probability and packet loss rate, and thus improves network throughput.

Drone Based Wireless Mesh Network for Disaster/Military Environment

In recent years, researches of disseminating wireless network have been conducted for areas without network infrastructure such as disaster situation or military disputes. However, conventional method was to provide a communication infrastructure by floating large aircraft as UAV or hot-air balloon in the high air. Therefore, it was difficult to utilize previous method because it requires a lot of time and cost. But it is possible to save money and time by using a drone which is already used in many areas as a small UAV. In this paper, we design a drone that can provide wireless infrastructure using high speed Wi-Fi. After reaching the target area, the drone can provide Wi-Fi using wireless mesh network and transmit the situation of local area through attached camera. And the transmitted videos can be monitored in the control center or cell phone through application in real time. The proposed scheme provides wireless communication of up to 160 Mbps in a coverage of about 200 m and video transmission with a coverage of about 120 m, respectively.

Hop distance fairness for wireless mesh network based on queue management

Wireless mesh network(WMN) is a new multi-hop network for broadband accessing to internet.However,there exists a server unfairness problem based on different hop distances in WMN.To solve this problem,the unfairness issue was analyzed in test-bed experiment and NS2 simulation.A dynamic queue management scheme E-QMMN was proposed,which allocates the queue buffer according to the hop distance of every flow.The experimental results show that the proposed scheme can not only increase the hop distance fairness of the legacy scheme at most 50%,but also reduce the average round trip time at least 29% in congested WMN environments.

Reliability Strategies for Data Transmission in Wireless Mesh Network

Wireless Mesh Network (WMN) is a new-type wireless network. Its core idea is that any of its wireless equipment can act as both an Access Point (AP) and a router. Each node in the network can send and receive signals as well as directly communicate with one or several peer nodes. One important issue to be considered in wireless Mesh networks is how to secure reliable data transmission in multi-hop links. To solve the problem, the 3GPP system architecture proposes two functionalities: ARQ and HARQ. This paper presents two HARQ schemes, namely hop-by-hop and edge-to-edge, and three ARQ schemes: hop-by-hop, edge-to-edge, and last-hop. Moreover, it proposes three solutions for WMNs from the perspective of protocol stock design: layered cooperative mechanism, relay ARQ mechanism and multi-hop mechanism.

LOAD AWARE ADAPTIVE BACKBONE SYNTHESIS IN WIRELESS MESH NETWORKS

Wireless Mesh Networks(WMNs) are envisioned to support the wired backbone with a wireless Backbone Networks(BNet) for providing internet connectivity to large-scale areas.With a wide range of internet-oriented applications with different Quality of Service(QoS) requirement, the large-scale WMNs should have good scalability and large bandwidth.In this paper, a Load Aware Adaptive Backbone Synthesis(LAABS) algorithm is proposed to automatically balance the traffic flow in the WMNs.The BNet will dynamically split into smaller size or merge into bigger one according to statistic load information of Backbone Nodes(BNs).Simulation results show LAABS generates moderate BNet size and converges quickly, thus providing scalable and stable BNet to facilitate traffic flow.

A Review on Wireless Mesh Networks

Wireless mesh networks (WMNs) are new kind of networking technology which facilitate the extension of wireless local area networks into wide areas and have emerged as a key technology for next-generation wireless networking.Due to the advantages of WMNs over other wireless networks,they are now a promising approach for future network access.Typical applications range from home broadband Internet access and community networking to wireless metropolitan area networks.Meanwhile,the considerable efforts in academic range from network architecture,network capacity,layered communication protocols,security,cross-layer design,etc.Still many technical challenges exist in designing affordable,reliable,and sustainable WMNs infrastructures.In order to provide a better understanding of these challenges,this paper presents a detailed investigation of current technologies for WMNs,and it will help to guide and refocus future works in this area.

Constructing of wireless emergency communication system for underground coal mine based on WMN technology

Based on the Wireless Mesh Network (WMN), a wireless emergency communicationsystem for underground coal mine which was designed to be capable of videosurveillance, voice communication, and environment monitoring at the same time wasproposed.The network architecture of the system was proposed, and its service model,extensible technology, medium access control, routing algorithm, channel allocation andsystem management technologies were analyzed according to the actual rescue requirementsof underground coal mine and the characteristics of underground spatial structureand radio transmissions.The relevant theories and key technologies were extracted,which would provide theoretical support for the system development.

Hierarchical wireless network architecture for factory network

The traditional wired networks in an industrial firm often encounters large difficulties,such as the cable installation,regular maintenance and cable replacement and so on,all these results in high cost.So,in this paper,we propose an IP-based hierarchical wireless network architecture and apply some of the technologies of 6LoWPAN to it.We verify the proposed architecture via real implementation with a wireless backbone,sensor networks and a connection between those networks.And the IP-based hierarchical industrial network is indeed an advanced network for harsh industrial environments.

基于混合干扰模型的多信道Mesh网络调度算法

研究了多信道无线Mesh网络中的调度及信道分配问题,设计了一种综合协议干扰模型与物理干扰模型的混合干扰模型,并在此干扰模型下提出了一种集中式调度算法。该算法在目前普遍使用的协议干扰模型的基础上,考虑了无线链路的物理传输特性:即使存在一定的干扰,也可以成功接收发射端发送的数据。模拟实验表明该算法可以提高Mesh网络中链路的并行性,有效减少总传输时间。

无线Mesh网中网络编码的研究进展

无线Mesh网络是一种具有广泛应用前景的无线接入系统,网络编码允许网络节点对接收的数据报文进行加工处理,为解决Mesh网网络问题提供了一条新途径。通过对比在单播中网络编码和传统路由的不同,阐述了网络编码基本原理;然后总结了网络编码的发展现状;分析和归纳了网络编码提高无线Mesh吞吐量、可靠性、安全性等性能的应用;最后对网络编码在Mesh网络中的进一步研究方向进行了展望。