Cactus-Shaped Frequency Reconfigurable Antenna for Sub 10 GHz Wireless Applications

This paper presents,a novel cactus shaped frequency reconfigurable antenna for sub 10 GHz wireless applications.PIN diode is utilized as an electrical switch to achieve reconfigurability,enabling operation in four different frequency ranges.In the switch ON state mode,the antenna supports 2177-3431 and 6301-8467 MHz ranges.Alternatively,the antenna resonates within 2329-3431 and 4951-6718 MHz while in the OFF state mode.Radiation efficiency values,ranging from 68%to 84%,and gain values,ranging from 1.6 to 4 dB,in the operating frequency bands.the proposed antenna satisfy the practical requirements and expectations.The overall planner dimensions of the proposed antenna model is 40×21 mm^(2).Moreover,the measurement results from the prototype support the simulation results.Based on the frequency ranges supported by the antenna,it can be used for multiple wireless standards and services,including Worldwide interoperability and Microwave Access(WiMAX),Wireless Fidelity(Wi-Fi),Bluetooth,Long Term Evolution(LTE)and satellite communications.This increases its applicability for use in mobile terminals.

Wireless location technology and its application

Wireless location technology is used to locate,track and monitor the location of given target using devices such as the radio frequency identification(RFID) based on WiFi technology and the sensors. And such applications as long term evolution(LTE) ,wireless local area networks(WLAN) ,RFID and location based service(LBS) are essential in today's wireless communications industry. In this paper,both wireless location technology and its application are proposed,where our experimental research results and theoretical innovation are included.

Wireless Mesh Technology and Network

Wireless Mesh Network (WMN) has been actively researched and developed as a new network technology to support broadband high- speed multimedia services . This paper discusses WMN technology and applications , and introduces the basic technologies , typical applications and current development of the WMN. With the future development of wireless distribution technology and network, wireless Mesh technology and network will become the key networking technology and architecture of wireless mobile communications , and will be widely used in various wireless networks with more important roles .

Cognition Based Reconfigurable Wireless Network Technology

The End-to-End Reconfigurability (E2R) project aims at realizing the convergence of the heterogeneous radio networks and the optimal utilization of the radio resources. With the continuous development of E2R technology and cognitive theory, the evolution from existing radio networks to future reconfigurable radio networks with the cognitive ability becomes possible. Nowadays the research aspects of E2R include the system architecture of reconfigurable radio networks and some key technologies for their evolution.

Ubiquitous Access Technology for Wireless Digital Home Networks

As an important branch of telecommunication technology, digital home networks have quickly developed in recent years. Although architecture of the digital home network based on telecommunication networks has been standardized in China, only wireless access is defined to be allowable. Therefore, it becomes the focus of further research how to establish a wireless digital home network. This article proposes the concept and shows the architecture of ubiquitous access for wireless digital home networks. Moreover, key technologies for ubiquitous access are discussed here, including cognitive radio, the concept of wireless Mesh, generic link transfer mechanism, Quality of Service (QoS) guarantee mechanism, Electromagnetic Compatibility (EMC) and coexistence of heterogeneous systems.

Efficacy of biofeedback therapy via a mini wireless device on sleep bruxism contrasted with occlusal splint:a pilot study

The putative causes of bruxism are multifactorial and there are no definite measures for bruxism management.The aim of this study was to evaluate the efficacy of biofeedback therapy on sleep bruxism,compared with occlusal splint.Twenty-four volunteers with sleep bruxism were divided into two groups：the GTB group that were treated with biofeedback therapy（n 512） and the GTO group that were treated with occlusal splint（n 512）.A mini pressure sensor integrated with a monitoring circuit by use of a maxillary biofeedback splint was fabricated.To foster the relaxation of the masticatory muscles and the nervous system,the wireless device received signals from bruxism events and vibrations alerted the bruxer when the threshold was exceeded.Total episodes and average duration of bruxism events during8 hours of sleep were analyzed with the monitoring program（TRMY1.0）.After 6 and 12 weeks,the episodes（P 50.001） and duration（P,0.05） in the GTB group declined dramatically.In contrast,there were no significant differences in the GTO group after the treatment（P.0.05）.Furthermore,the episodes had significant differences between the GTB group and the GTO group after the same period of treatment（P 5 0.000）.The results suggest that biofeedback therapy may be an effective and convenient measure for mild bruxers,when compared with occlusal splint therapy.The mini wireless biofeedback method may be of value for the diagnosis and management of bruxism in the future.

Key Technologies of Wireless Heterogeneous Network Security

Convergence and collaboration of heterogeneous networks in the next generation public mobile networks will be a subject of universal significance. Convergence of heterogeneous networks, as an effective approach to improve the coverage and capacity of public mobile network, to enable communication services, to provide Internet access and to enable mobile computing from everywhere, has drawn widespread attention for its good prospects in application. Construction of security system for wireless heterogeneous networks and development of new security models, key security techniques and approaches are critical and mandatory in heterogeneous networks development. Key technology of wireless heterogeneous networks security covers security routing protocol, access authentication, intrusion detection system, cooperative communication between nodes, etc.

Wireless Mesh Networks and Cooperative Relaying Technologies

The Wireless Mesh Network (WMN) has become a focus in research of wireless broadband communications . In a switching technologies - based wireless Mesh network, the entire network is regarded as an IP subnet, so it cannot be applied in situations where large coverage is required . The use of cooperative relaying technologies can improve the transmission rate and reliability of wireless link; while the wireless Mesh network, once integrated with cooperative relaying technologies and routing technologies , can improve its spectrum efficiency and cover a wide area . However, there are many problems to be solved with respect to standardization, key technologies research and industrialization. Therefore , the application of cooperative relaying technologies in wireless Mesh networks is still a great challenge .

Scalability Technologies for Wireless Mesh Networks

The continuous increase of data transmission density in wireless mobile communications has posed a challenge to the system performance of Wireless Mesh Networks (WMNs ). There is a rule for wireless Ad hoc networks that the average node capacity decreases while the number of nodes increases , so it is hard to establish a large - scale wireless Mesh network. Network scalability is very important for enhancing the adaptive networking capability of the wireless Mesh network. This article discusses key scalability technologies for Mesh Base Stations (BSs ) and Mesh Mobile Stations (MSs ), such as channel allocation, intelligent routing , multi- antenna , node classification, Quality of Service (QoS) differentiation and cooperative transmission.

Key Technologies of Wireless Mesh Network

The Wireless Mesh Network (WMN) is a special kind of Ad hoc network with a hierarchical network structure . Its backbone transmission network has such characteristics as multi- hop , topology stability, no electricity supply constraints , convergence of flows . Improving the spatial reuse of spectrum is an effective approach to increase network capacity. The linchpin of this approach is to effectively control the interference range between wireless links . The multi- channel networking technology is one of the key technologies of WMN, and its core is the channel allocation through which the channel utilization can be maximized . The mutual interference between multi- hop wireless links should be considered when choosing the routing metrics in WMN. Through the load - balancing routing method , the network capacity and throughput of nodes can be improved .

Investigation of Architecture and Essential Technologies of Wireless Sensor Network

This paper introduces the architecture of wireless sensor networks, presents a cross-layer network management and control mechanism. The key technologies, such as Medium Access Control (MAC) and wireless routing protocols are discussed and compared. A proposal of applying the simple IEEE 802 MAC protocol into the wireless sensor network is introduced. In addition, in order to improve the system capacity, a multi-channel strategy for the sensor nodes is presented for decreasing the blocking probability and suppressing the accessing time delay. It is concluded that there are still a number of problems to be solved, including decreasing power consumption, improving capacity and avoiding access collision, to promote the successful commercial application of wireless sensor network.

Research on the Development of 5G Wireless Communication in the Industrial Field

The development of science and technology is the key to changing human life and promoting social and economic development.As a product of technological development,the widespread application of communication technology has brought a brand new“dawn”to the development of human society.5G wireless communication technology is an advanced wireless communication technology that has recently developed.With the advantages of low energy consumption and high network speed,5G technology has shown very bright development prospects in various fields today.Government,operators and equipment providers are actively promoting and deploying 5G technology,and all links in the industry chain are mature.It is expected that the future market size will reach 17 trillion,especially in today’s industrial field,the application of 5G technology will further enhance work efficiency,ensure work quality,and promote good development in the industrial field.Based on this,this paper will study the development of 5G wireless technology in the industrial field,so as to provide corresponding reference for the good application of 5G technology in the industrial field.

Wireless Positioning Technologies in CDMA System

Location services not only provide address information, but also locate, monitor and track terminals on a real-time basis. To deliver fast and accurate location services, it is necessary to select an appropriate positioning method. Currently, 3 methods are available for CDMA wireless positioning: network based, Mobile Station (MS) based, and GpsOne positioning.As these methods are different in location time, accuracy, availability, privacy, and operation cost, they shall be selected according to the actual network conditions. Network structure, information bearer protocols, and transport mode make the basis of a wireless positioning system. They can be implemented in different ways, and some details shall be specified by the operators.

Wireless Network Technologies Supporting M2M Applications

When computers and communication devices are available everywhere in the future, the categories of communication will expand to cover not only the man-man and the man-machine, but also the machine-machine (M2M) communication. Someday, the traffic generated by machines will greatly exceed those of man-machine and man-man applications. Large numbers of M2M applications will need various wireless networks to support them. This paper introduces the characteristics, advantages and disadvantages of the currently available various wireless network technologies, including WiFi, Bluetooth, ZigBee, passive RFID and the 802.15 standard networks.

Thinking About Developing 3G and Broadband Wireless Access Technologies

It is wise for fixed operators to make use of broadband wireless access technologies,such as IEEE802.16d,to develop mobile access based on their existing fixed broadband IP networks.Mobile operators have to evolve their networks from 2G to 3G for making full use of their current resources. However,the AII-IP core network will be a general trend since broadband wireless access adopts the connectionless statistical packet multiplexing technology.Based on the introduction of IEEE802.16d,High Speed Downlink Packet Access (HSDPA) and CDMA2000 1x EV-DV technologies,this paper discusses the development trend of broadband wireless access technologies, and concludes that 3G's packet access technologies are the same as IEEE802.16d/e,and AII-IP is the goal.It emphasizes that Chinese TD-SCDMA should develop toward connectionless statistical packet multiplexing as early as possible.

Implantable(Bio)sensors as new tools for wireless monitoring of brain neurochemistry in real time

Implantable electrochemical microsensors are characterized by high sensitivity, while amperometric biosensors are very selective in virtue of the biological detecting element. Each sensor, specific for every neurochemical species, is a miniaturized hightechnology device resulting from the combination of several factors: electrode material, shielding polymers, applied electrochemical technique, and in the case of biosensors, biological sensing material, stabilizers, and entrapping chemical nets. In this paper, we summarizethe available technology for the in vivo electrochemical monitoring of neurotransmitters(dopamine, norepinephrine, serotonin, acetylcholine, and glutamate), bioenergetic substrates(glucose, lactate, and oxygen), neuromodulators(ascorbic acid and nitric oxide), and exogenous molecules such as ethanol. We also describe the most represented biotelemetric technologies in order to wirelessly transmit the signals of the abovelisted neurochemicals. Implantable(Bio)sensors, integrated into miniaturized telemetry systems, represent a new generation of analytical tools that could be used for studying the brain's physiology and pathophysiology and the effects of different drugs(or toxic chemicals such as ethanol) on neurochemical systems.

Cloud-Processing Platform for Traffic Flow Based on Internet of Car

Internet of Car, resulting from the Internet of Things, is a key point for the forthcoming smart city. In this article, GPS technology, 3G wireless technology and cloud-processing technology are employed to construct a cloud-processing network platform based on the Internet of Car. By this platform, positions and velocity of the running cars, information of traffic flow from fixed monitoring points and transportation videos are combined to be a virtual traffic flow data platform, which is a parallel system with real traffic flow and is able to supply basic data for analysis and decision of intelligent transportation system.

Analysis of the Efficiency-Energy with Regression and Classification in Household Using K-NN

This paper aims to study energy consumption in a house. Home energy managementsystem (HEMS) has become very important, because energy consumption of aresidential sector accounts for a significant amount of total energy consumption.However, a conventional HEMS has some architectural limitations among dimensionalvariables reusability and interoperability. Furthermore, the cost of implementation inHEMS is very expensive, which leads to the disturbance of the spread of a HEMS.Therefore, this study proposes an Internet of Things (IoT) based HEMS with lightweightphotovoltaic (PV) system over dynamic home area networks (DHANs), which enablesthe construction of a HEMS to be scalable reusable and interoperable. The study suggestsa technique for decreasing cost of energy that HEMS is using and various perspectives insystem. The method that proposed is K-NN (K-Nearest Neighbor) which helps us toanalyze the classification and regression datasets. This paper has the result from the datarelevant in October 2018 from some buildings of Nanjing University of InformationScience and Technology.

Review of Internet of Things in Different Sectors:Recent Advances,Technologies,and Challenges

Human beings and their activities are now connected through Internet of Things(IoT)with the evolution of wireless communication technologies.IoT is becoming popular and its usage is immensely increasing among various sectors.In this research paper,a comprehensive review has been conducted by considering recent and important literature review on IoT applications being operated in three major sectors.The three sectors studied are health,sports and transportation and logistics.Paper explored that with the help of IoT techniques,different miniature sized devices are invented which can record various parameters of human body,wearables devices have been invented which are playing important role in monitoring and recording daily fitness are working on CIoT technology and IoT emergence in the field of transportation and logistics helps in resolving several issues including conveniences,navigation issues,service cost and security issues.All the papers reviewed are journal published from 2010 to 2020.In latter part,this paper also highlighted security,privacy,reliability,consumption of various resources and policies as significant challenges for IoT.

Unique Features of Mobile Commerce

While the market potentials and impacts of web-based e-commerce are still in the ascendant, the advances in wireless technologies and mobile networks have brought about a new business opportunity and research attention, what is termed mobile commerce. Commonly, mobile commerce is considered to be another new application of existing web-based e-commerce onto wireless networks, but as an independent business area, mobile commerce has its own advantages and challenges as opposed to traditional e-commerce applications. This paper focuses on exploring the unique features of mobile commerce as compared with traditional e-commerce. Also, there are still some limitations arisen in m-commerce in contrast to web-based e-commerce. Finally, current state of mobile commerce in Japan is presented in brief, with an introduction of several cases involving mobile commerce applications in today's marketplace.