Estimating wood quality attributes from dense airborne LiDAR point clouds

Mapping individual tree quality parameters from high-density LiDAR point clouds is an important step towards improved forest inventories.We present a novel machine learning-based workflow that uses individual tree point clouds from drone laser scanning to predict wood quality indicators in standing trees.Unlike object reconstruction methods,our approach is based on simple metrics computed on vertical slices that summarize information on point distances,angles,and geometric attributes of the space between and around the points.Our models use these slice metrics as predictors and achieve high accuracy for predicting the diameter of the largest branch per log (DLBs) and stem diameter at different heights (DS) from survey-grade drone laser scans.We show that our models are also robust and accurate when tested on suboptimal versions of the data generated by reductions in the number of points or emulations of suboptimal single-tree segmentation scenarios.Our approach provides a simple,clear,and scalable solution that can be adapted to different situations both for research and more operational mapping.

Qualitative and Quantitative Characterization of Wood Fibers of Shrubs and Tree Species of the Tamaulipan Thorn Scrub, Northeastern Mexico and Its Possible Relation to Wood Quality and Utilization

The present study was undertaken to determine the variability in fiber cell morphology and its length among wood species of the Tamaulipan Thorn Scrub, Northeastern Mexico, used for various uses such as timber for furniture, fence, post, firewood and sources of forage. The results reveal large variability in fiber cell morphology and fiber cell dimensions. The species are classified on the basis of its fiber cell morphology and fiber cell length and recommended for their possible utilization for different purposes. Wood having fibre cells with broad lumen and thin wall could be suitable for the manufacture of paper documented in the literature viz. Acacia farnesciana, Caesalpinia mexicana, Cordia boisiieri, Diospyros palmeri, Forestieria angustifolia, Morus celtifolia, Prosopis laevigata. This technique can be used in preliminary screening of woody species for its utilization for different purposes. Further studies are needed to confirm.

Tree growth performance and estimation of wood quality in plantation trials for Maesopsis eminii and Shorea spp.

Plantations of tropical species axe becoming an increasingly important source of wood. However, it is important that research trials focus not only on tree growth performance, but also on wood quality. The aims of this study were to assess the growth performance of six commercially and ecologically important tree species from separate plantation trials in Indonesia and to determine the relationships between tree growth and wood quality in terms of the dynamic modulus of elasticity （MOE） and wood density. Forty-eight 7-year Maesopsis eminii Engl. and thirty-five 9-year specimens （7 each of 5 Shorea spp.） were selected from two trials. The MOE, based on acoustic velocity, was indirectly measured to evaluate wood stiffness. Tree-growth performance was evaluated, and correlations between growth traits and acoustic velocity as well as density and wood stiffness properties were estimated. The growth performance of M. eminii in terms of tree volume was significantly different in three different cate- gories of growth （i.e. fast, medium, slow）. Of the five Shorea spp. studied, Shorea leprosula Miq. had the highest growth rate, as expected since it is known to be a fastgrowing Shorea species. Indirect measurement of wood quality by means of non-destructive ultrasonic methods showed a weak negative correlation between tree volume and acoustic velocity and dynamic MOE. Although each fast-growing tree could reach a merchantable size faster than other varieties or species, wood traits of various species tested were not significantly different based on tree growth rate performance. The findings from this study could be used to improve selection criteria in future breeding trials; indirect measurements of the dynamic modulus of elasticity can be used in mass pre-selection of genetic materials, to choose the most-promising material for in-depth evaluation.

Response of saproxylic insect communities to logging history, tree species, stage of decay, and wood posture in the central Nearctic boreal forest

Saproxylic insect assemblages are essential functional components of forest ecosystems that can be affected by forest management.We used a split-plot ANOVA design to analyze differences in selected saproxylic insects（all arthropod orders and dipteran and parasitic hymenopteran families） emerging from dead wood of sites with different logging histories（horse-logged,mechanically-logged and unlogged）,tree species（Populus and Picea）,stage of decay（early-and late-decay stages） and posture（standing and downed logs） in the boreal forest of central Canada.No clear effects of logging history were seen for the studied taxa; however,interaction between logging history and other dead wood features was apparent.Cecidomyiidae consistently emerged more from Populus than from Picea dead wood.Most of the studied saproxylic families were more abundant in late-decay than in early-decay wood.Dipterans of the Cecidomyiidae,Ceratopogonidae,Empididae,Mycetophilidae and Sciaridae families,and hymenopterans of the Diapriidae and Ichneumonidae families were significantly more abundant in downed than in standing dead wood.In contrast,Mymaridae was most abundant in standing dead wood.Our study provides evidence that some insects at high taxonomic levels respond differently to dead wood quality,and this could inform future management strategies in the boreal forest for the conservation of saproxylic fauna and their ecological functions.

Variability of European beech wood density as influenced by interactions between treering growth and aspect

Background： Wood density is considered to be the most important predictor of wood quality but despite its importance, diffuse-porous tree species have been the subject of only a limited number of studies. The importance of European beech forests for Central Europe calls for profound research to examine the potential impact of a warmer climate on the quality of beech timber. Methods： In this study we analysed the influence of tree-ring width and tree-ring age on the wood density of beech, and whether the wood density response to these two parameters is modified by aspect. A linear mixed-effects model for wood density was constructed for mean density data measured with high frequency densitometry on stem discs from 72 beech trees sampled from two different aspects （northeast -NE and southwest -SW） of a valley in southwestern Germany. Results： Part of the variability of mean annual wood density was explained by cambial age： an increase in cambial age resulted in an increase in mean wood density. Tree-ring width and aspect had only a small influence on wood density, Wood density on the SW aspect was lower than on the NE with a difference of approximately 0.006 g/cm3. The between-tree variability was very high. Conclusions： The significant interaction between cambial age and aspect reflects the importance of site conditions at older tree ages： with increasing cambial age the difference between aspects becomes stronger. Our results give a better understanding of the importance of site conditions on the wood quality of beech.

Forest aboveground biomass estimates in a tropical rainforest in Madagascar: new insights from the use of wood specific gravity data

To generate carbon credits under the Reducing Emissions from Deforestation and forest Degradation program（REDD＋）, accurate estimates of forest carbon stocks are needed. Carbon accounting efforts have focused on carbon stocks in aboveground biomass（AGB）.Although wood specific gravity（WSG） is known to be an important variable in AGB estimates, there is currently a lack of data on WSG for Malagasy tree species. This study aimed to determine whether estimates of carbon stocks calculated from literature-based WSG values differed from those based on WSG values measured on wood core samples. Carbon stocks in forest biomass were assessed using two WSG data sets：（i） values measured from 303 wood core samples extracted in the study area,（ii） values derived from international databases. Results suggested that there is difference between the field and literaturebased WSG at the 0.05 level. The latter data set was on average 16 % higher than the former. However, carbon stocks calculated from the two data sets did not differ significantly at the 0.05 level. Such findings could be attributed to the form of the allometric equation used which gives more weight to tree diameter and tree height than to WSG. The choice of dataset should depend on the level of accuracy（Tier II or III） desired by REDD＋. As higher levels of accuracy are rewarded by higher prices, speciesspecific WSG data would be highly desirable.

Sex effect on growth performance and marker-aided sex discrimination of seedlings of Populus deltoides

Sex has a significant effect on various traits among dioecious plants.In this analysis of the sex effect on the radial growth and wood density of numerous 20-yearold trees of Populus deltoides growing in a common garden,male trees performed better than the females in radial growth,but sex did not significantly affect wood density.Growth rate and wood density were weakly negatively correlated.Sex selection is also critical for controlling seed-hair pollution from P.deltoides plantations.However,because the juvenile period of P.deltoides lasts for years,a reliable technique to determine the sex of juveniles has been needed.Here we developed a marker-aided technique to discriminate the sexes of P.deltoides seedlings.This study provides essential information on target traits and a highly desirable genetic toolkit for accelerate breeding programs for this important tree species.

Radial and longitudinal density variations in Abies cephalonica and Pinus halepensis

Basic wood density is an excellent indicator of quality,it is correlated with numerous physical,physiological and mechanical characteristics of a species and is a good descriptor of wood quality and important indicator of tree performance in community ecology.An accurate method is thus needed to estimate wood density.The standard way is to calculate the ratio of the oven-dried mass of a wood sample divided by its green volume,but wood characteristics within and between growth rings are highly variable;the density can vary in the longitudinal and the radial directions.The present study investigates the longitudinal and radial fl uctuations in the basic density of Abies cephalonica Loud and Pinus halepensis Mill.Four logs were cut from four diff erent trees for each species and 16 discs were formed(two discs from each log,one at the base and one at the top).Each disc was cut into cubes where their distance from the pith was measured and then sorted into 2 cm wide concentric zones.The results revealed a mild decreasing trend in basic density from the foot of the trunk upward for both species.The pith in both species also seems to have a relatively high density,which in the immediate next growth rings decreases only to resume increasing toward the bark.

Crown Morphology of Norway Spruce from Usual Tree Measurements

The crown morphology of Norway spruce (Picea abies Karst) was studied from 617 sample trees. In order to model branch and crown descriptors the linear and nonlinear regression methods were extensively used. Results show that the branch length can be fairly well predicted from the distance to the apex of the tree and that the branch spread has a high correlation with the branch length and the insertion angle. Models have been set up to predict the crown ratio, height to the base of the living crown, height to the first living branch and the height to the first dead branch from the usual whole-tree measurements, namely diameter at breast height total height and total age.