In order to clarify the reason why the creep rupture time of pre-strained Ni-23Cr-7W Alloy (HR6W) is longer than that of the non-pre-strained HR6W, microstructures of HR6W after a series of creep tests were investigat...In order to clarify the reason why the creep rupture time of pre-strained Ni-23Cr-7W Alloy (HR6W) is longer than that of the non-pre-strained HR6W, microstructures of HR6W after a series of creep tests were investigated. The creep tests were conducted at 750°C, 90 and 100 MPa. In the pre-strained samples, the grain boundary shielding ratio by precipitates was larger than that of the non-pre-strained sample. In addition, in the pre-strained samples the size of the M23C6 carbide in the grains was finer than in the non-pre-strained sample. The W content in the M23C6 carbide in the pre-strained samples tended to be larger than in the non-pre-strained sample. Therefore, the Ostwald ripening of the carbide was delayed and the size of M23C6 carbide was thought to be fine for a long time. These observations show that creep strength in the pre-strained samples is higher than that of the non-pre-strained sample because of both precipitation strengthening inside of the grains and grain boundaries.展开更多
As an aid in establishing an understanding on the electronic level, the influence of bismuth on the cohesion of nickelΣ5 (012) grain boundary was determined using the plane wave pseudopotential (PWPP) method with the...As an aid in establishing an understanding on the electronic level, the influence of bismuth on the cohesion of nickelΣ5 (012) grain boundary was determined using the plane wave pseudopotential (PWPP) method with the generalized gradient approximation. Based on the Rice-Wang model, the total energy calculations show that Bi behaves as an embrittler of the Ni grain-boundary, which predicts the experimentally known behavior. The total charge density, and difference charge density of the grain boundary also demonstrats that the Bi atom forms weaker bonds with neighboring Ni atoms in the grain boundary region. Total density of states (DOS) show that there exists significant covalent bonding for the grain boundary system with Bi segregated which help to embrittle the grain boundary and the change that Ni local d-DOS is narrowed due to segregation of Bi is also beneficial for the decohesion.展开更多
To examine the influence of grain boundary engineering(GBE)on the work hardening behavior,the tensile tests were carried out on the non-GBE and GBE AL6XN super-austenitic stainless steel(ASS)samples with a comparable ...To examine the influence of grain boundary engineering(GBE)on the work hardening behavior,the tensile tests were carried out on the non-GBE and GBE AL6XN super-austenitic stainless steel(ASS)samples with a comparable grain size at two strain rates of 10^(-2)s^(-1)and 10^(-4)s^(-1).The evolution of deformation microstructures was revealed by transmission electron microscopy(TEM)and quasi-in situ electron backscatter diffraction(EBSD)observations.The results show that the influence of GBE on the mechanical properties of AL6XN super-ASS is mainly manifested in the change of work hardening behavior.At the early stage of plastic deformation,GBE samples show a slightly lowered work hardening rate,since the special grain boundaries(SBs)of a high fraction induce a higher dislocation free path and a weaker back stress;however,with increasing plastic deformation amount,the work hardening rate of GBE samples gradually surpasses that of non-GBE samples due to the better capacity of maintainable work hardening that is profited from the inhibited dislocation annihilation by SBs.In a word,the enhanced capacity of sustained work hardening effectively postpones the appearance of necking point and thus efficaciously ameliorates the ductility of GBE samples under the premise of little changes in yield strength and ultimate tensile strength.展开更多
文摘In order to clarify the reason why the creep rupture time of pre-strained Ni-23Cr-7W Alloy (HR6W) is longer than that of the non-pre-strained HR6W, microstructures of HR6W after a series of creep tests were investigated. The creep tests were conducted at 750°C, 90 and 100 MPa. In the pre-strained samples, the grain boundary shielding ratio by precipitates was larger than that of the non-pre-strained sample. In addition, in the pre-strained samples the size of the M23C6 carbide in the grains was finer than in the non-pre-strained sample. The W content in the M23C6 carbide in the pre-strained samples tended to be larger than in the non-pre-strained sample. Therefore, the Ostwald ripening of the carbide was delayed and the size of M23C6 carbide was thought to be fine for a long time. These observations show that creep strength in the pre-strained samples is higher than that of the non-pre-strained sample because of both precipitation strengthening inside of the grains and grain boundaries.
文摘As an aid in establishing an understanding on the electronic level, the influence of bismuth on the cohesion of nickelΣ5 (012) grain boundary was determined using the plane wave pseudopotential (PWPP) method with the generalized gradient approximation. Based on the Rice-Wang model, the total energy calculations show that Bi behaves as an embrittler of the Ni grain-boundary, which predicts the experimentally known behavior. The total charge density, and difference charge density of the grain boundary also demonstrats that the Bi atom forms weaker bonds with neighboring Ni atoms in the grain boundary region. Total density of states (DOS) show that there exists significant covalent bonding for the grain boundary system with Bi segregated which help to embrittle the grain boundary and the change that Ni local d-DOS is narrowed due to segregation of Bi is also beneficial for the decohesion.
基金financially supported by the National Natural Science Foundation of China(NSFC)under Grant Nos.51871048 and 52171108。
文摘To examine the influence of grain boundary engineering(GBE)on the work hardening behavior,the tensile tests were carried out on the non-GBE and GBE AL6XN super-austenitic stainless steel(ASS)samples with a comparable grain size at two strain rates of 10^(-2)s^(-1)and 10^(-4)s^(-1).The evolution of deformation microstructures was revealed by transmission electron microscopy(TEM)and quasi-in situ electron backscatter diffraction(EBSD)observations.The results show that the influence of GBE on the mechanical properties of AL6XN super-ASS is mainly manifested in the change of work hardening behavior.At the early stage of plastic deformation,GBE samples show a slightly lowered work hardening rate,since the special grain boundaries(SBs)of a high fraction induce a higher dislocation free path and a weaker back stress;however,with increasing plastic deformation amount,the work hardening rate of GBE samples gradually surpasses that of non-GBE samples due to the better capacity of maintainable work hardening that is profited from the inhibited dislocation annihilation by SBs.In a word,the enhanced capacity of sustained work hardening effectively postpones the appearance of necking point and thus efficaciously ameliorates the ductility of GBE samples under the premise of little changes in yield strength and ultimate tensile strength.
