This paper describes a numerical model of the world ocean based on the fully primitive equations. A 'Standard' ocean state is introduced into the equations of the model and the perturbed thermodynamic variable...This paper describes a numerical model of the world ocean based on the fully primitive equations. A 'Standard' ocean state is introduced into the equations of the model and the perturbed thermodynamic variables are used in the modlc's calculations. Both a free upper surface and a bottom topography are included in the model and a sigma coordinate is used to normalize the model's vertical component. The model has four unevenly-spaced layers and 4 × 5 horizontal resolution based on C-grid system. The finite-difference scheme of the model is designed to conserve the gross available energy in order to avoid fictitious energy generation or decay.The model has been tested in response to the annual mean surface wind stress, sea level air pressure and sea level air temperature as a preliminary step to its further improvement and its coupling with a global atmospheric general circulation model. Some of results, including currents, temperature and sea surface elevation simulated by the mode! arc presented.展开更多
On the basis of the salinity distribution of isopycnal（σ_0=27.2 kg/m^3） surface and in salinity minimum, the Antarctic Intermediate Water（AAIW） around South Australia can be classified into five types correspondi...On the basis of the salinity distribution of isopycnal（σ_0=27.2 kg/m^3） surface and in salinity minimum, the Antarctic Intermediate Water（AAIW） around South Australia can be classified into five types corresponding to five regions by using in situ CTD observations. Type 1 is the Tasman AAIW, which has consistent hydrographic properties in the South Coral Sea and the North Tasman Sea. Type 2 is the Southern Ocean（SO） AAIW, parallel to and extending from the Subantarctic Front with the freshest and coldest AAIW in the study area. Type 3 is a transition between Type 1 and Type 2. The AAIW transforms from fresh to saline with the latitude declining（equatorward）. Type 4, the South Australia AAIW, has relatively uniform AAIW properties due to the semienclosed South Australia Basin. Type 5, the Southeast Indian AAIW, progressively becomes more saline through mixing with the subtropical Indian intermediate water from south to north. In addition to the above hydrographic analysis of AAIW, the newest trajectories of Argo（Array for real-time Geostrophic Oceanography） floats were used to constructed the intermediate（1 000 m water depth） current field, which show the major interocean circulation of AAIW in the study area. Finally, a refined schematic of intermediate circulation shows that several currents get together to complete the connection between the Pacific Ocean and the Indian Ocean. They include the South Equatorial Current and the East Australia Current in the Southwest Pacific Ocean, the Tasman Leakage and the Flinders Current in the South Australia Basin, and the extension of Flinders Current in the southeast Indian Ocean.展开更多
The global effects of ocean acidification (OA) on coral reefs are of growing concern. Carbon dioxide released into the atmosphere as a result of burning fossil fuels, not only has an effect on “global warming”, but ...The global effects of ocean acidification (OA) on coral reefs are of growing concern. Carbon dioxide released into the atmosphere as a result of burning fossil fuels, not only has an effect on “global warming”, but also on OA which is called the “other CO2 problem”. OA combined with high ocean temperatures has resulted in a massive bleaching of coral reefs in the Indian Ocean and throughout Southeast Asia over the past decade, which is ultimately lethal. Here we discuss the option if innovative seaweed bio-technology—the Ulva lactuca bioreactor option, with its H+ ion-absorbing capacity and its huge green biomass production of around 50 MT/ha/year—which can stabilize our “World Ocean” and our global coral reefs. From our calculations, we came to the conclusion that an area covered with “Ulva lactuca bioreactors” with a production capacity of 250 × 1016 ha of seaweed per year is needed to remove all H+ ions that cause OA in our “World Ocean” since the beginning of the “Industrial Revolution” ≈ 250 years ago. This is a daunting task and therefore we have opted for a multi-faceted approach including variability in seaweed species, avoidance of eutrophication & heavy-metal accumulation, prevention of global warming by more green-biomass production and a better estimation of the huge Kelp seaweed populations in temperate zones in order to protect our coral reefs for the short term.展开更多
A set of absolute geostrophic current(AGC) data for the period January 2004 to December 2012 are calculated using the P-vector method based on monthly gridded Argo profi les in the world tropical oceans. The AGCs agre...A set of absolute geostrophic current(AGC) data for the period January 2004 to December 2012 are calculated using the P-vector method based on monthly gridded Argo profi les in the world tropical oceans. The AGCs agree well with altimeter geostrophic currents, Ocean Surface Current Analysis-Real time currents, and moored current-meter measurements at 10-m depth, based on which the classical Sverdrup circulation theory is evaluated. Calculations have shown that errors of wind stress calculation, AGC transport, and depth ranges of vertical integration cannot explain non-Sverdrup transport, which is mainly in the subtropical western ocean basins and equatorial currents near the Equator in each ocean basin(except the North Indian Ocean, where the circulation is dominated by monsoons). The identifi ed nonSverdrup transport is thereby robust and attributed to the joint effect of baroclinicity and relief of the bottom(JEBAR) and mesoscale eddy nonlinearity.展开更多
A neutral density surface is a logical study frame for water-mass mixing since water parcels spread along such a surface without doing work against buoyancy restoring force. Mesoscale eddies are believed to stir and s...A neutral density surface is a logical study frame for water-mass mixing since water parcels spread along such a surface without doing work against buoyancy restoring force. Mesoscale eddies are believed to stir and subsequently mix predominantly along such surfaces. Because of the nonlinear nature of the equation of state of seawater, the process of accurately mapping a neutral density surface necessarily involves lateral computation from one conductivity, temperature and depth (CTD) cast to the next in a logical sequence. By contrast, the depth of a potential density surface on any CTD cast is found solely from the data on this cast. The lateral calculation procedure causes a significant inconvenience. In a previous paper by present author published in this journal (You, 2006), the mapping of neutral density surfaces with regularly gridded data such as Levitus data has been introduced. In this note, I present a new method to find the depth of a neutral density surface from a cast without having to specify an integration path in space. An appropriate reference point is required that is on the neutral density surface and thereafter the neutral density surface can be de- termined by using the CTD casts in any order. This method is only approximate and the likely errors can be estimated by plotting a scatter diagram of all the pressures and potential temperatures on the neutral density surfaces. The method assumes that the variations of potential temperature and pressure (with respect to the values at the reference point) on the neutral density surface are proportional. It is important to select the most appropriate reference point in order to approximately satisfy this assumption, and in practice this is found by inspecting the θ-p plot of data on the surface. This may require that the algorithm be used twice. When the straight lines on the θ-p plot, drawn from the reference point to other points on the neutral density surface, enclose an area that is external to the clus- ter of θ-p points of the neutral density surface, errors will occur, and these errors can be quantified from this diagram. Examples showing the use of the method are presented for each of the world’s main oceans.展开更多
文摘This paper describes a numerical model of the world ocean based on the fully primitive equations. A 'Standard' ocean state is introduced into the equations of the model and the perturbed thermodynamic variables are used in the modlc's calculations. Both a free upper surface and a bottom topography are included in the model and a sigma coordinate is used to normalize the model's vertical component. The model has four unevenly-spaced layers and 4 × 5 horizontal resolution based on C-grid system. The finite-difference scheme of the model is designed to conserve the gross available energy in order to avoid fictitious energy generation or decay.The model has been tested in response to the annual mean surface wind stress, sea level air pressure and sea level air temperature as a preliminary step to its further improvement and its coupling with a global atmospheric general circulation model. Some of results, including currents, temperature and sea surface elevation simulated by the mode! arc presented.
基金The Chinese Polar Environment Comprehensive Investigation and Assessment Programs under contract Nos CHINARE-04-04 and CHINARE-04-01
文摘On the basis of the salinity distribution of isopycnal（σ_0=27.2 kg/m^3） surface and in salinity minimum, the Antarctic Intermediate Water（AAIW） around South Australia can be classified into five types corresponding to five regions by using in situ CTD observations. Type 1 is the Tasman AAIW, which has consistent hydrographic properties in the South Coral Sea and the North Tasman Sea. Type 2 is the Southern Ocean（SO） AAIW, parallel to and extending from the Subantarctic Front with the freshest and coldest AAIW in the study area. Type 3 is a transition between Type 1 and Type 2. The AAIW transforms from fresh to saline with the latitude declining（equatorward）. Type 4, the South Australia AAIW, has relatively uniform AAIW properties due to the semienclosed South Australia Basin. Type 5, the Southeast Indian AAIW, progressively becomes more saline through mixing with the subtropical Indian intermediate water from south to north. In addition to the above hydrographic analysis of AAIW, the newest trajectories of Argo（Array for real-time Geostrophic Oceanography） floats were used to constructed the intermediate（1 000 m water depth） current field, which show the major interocean circulation of AAIW in the study area. Finally, a refined schematic of intermediate circulation shows that several currents get together to complete the connection between the Pacific Ocean and the Indian Ocean. They include the South Equatorial Current and the East Australia Current in the Southwest Pacific Ocean, the Tasman Leakage and the Flinders Current in the South Australia Basin, and the extension of Flinders Current in the southeast Indian Ocean.
文摘The global effects of ocean acidification (OA) on coral reefs are of growing concern. Carbon dioxide released into the atmosphere as a result of burning fossil fuels, not only has an effect on “global warming”, but also on OA which is called the “other CO2 problem”. OA combined with high ocean temperatures has resulted in a massive bleaching of coral reefs in the Indian Ocean and throughout Southeast Asia over the past decade, which is ultimately lethal. Here we discuss the option if innovative seaweed bio-technology—the Ulva lactuca bioreactor option, with its H+ ion-absorbing capacity and its huge green biomass production of around 50 MT/ha/year—which can stabilize our “World Ocean” and our global coral reefs. From our calculations, we came to the conclusion that an area covered with “Ulva lactuca bioreactors” with a production capacity of 250 × 1016 ha of seaweed per year is needed to remove all H+ ions that cause OA in our “World Ocean” since the beginning of the “Industrial Revolution” ≈ 250 years ago. This is a daunting task and therefore we have opted for a multi-faceted approach including variability in seaweed species, avoidance of eutrophication & heavy-metal accumulation, prevention of global warming by more green-biomass production and a better estimation of the huge Kelp seaweed populations in temperate zones in order to protect our coral reefs for the short term.
基金Supported by the National Basic Research Program of China(973 Program)(No.2012CB956001)the CMA(No.GYHY201306018)+2 种基金the Chinese Academy of Sciences(CAS)(No.XDA11010301)the National Natural Science Foundation of China(Nos.41176019,41421005,U1406401)the State Oceanic Administration(SOA)(No.GASI-03-01-01-05)
文摘A set of absolute geostrophic current(AGC) data for the period January 2004 to December 2012 are calculated using the P-vector method based on monthly gridded Argo profi les in the world tropical oceans. The AGCs agree well with altimeter geostrophic currents, Ocean Surface Current Analysis-Real time currents, and moored current-meter measurements at 10-m depth, based on which the classical Sverdrup circulation theory is evaluated. Calculations have shown that errors of wind stress calculation, AGC transport, and depth ranges of vertical integration cannot explain non-Sverdrup transport, which is mainly in the subtropical western ocean basins and equatorial currents near the Equator in each ocean basin(except the North Indian Ocean, where the circulation is dominated by monsoons). The identifi ed nonSverdrup transport is thereby robust and attributed to the joint effect of baroclinicity and relief of the bottom(JEBAR) and mesoscale eddy nonlinearity.
文摘A neutral density surface is a logical study frame for water-mass mixing since water parcels spread along such a surface without doing work against buoyancy restoring force. Mesoscale eddies are believed to stir and subsequently mix predominantly along such surfaces. Because of the nonlinear nature of the equation of state of seawater, the process of accurately mapping a neutral density surface necessarily involves lateral computation from one conductivity, temperature and depth (CTD) cast to the next in a logical sequence. By contrast, the depth of a potential density surface on any CTD cast is found solely from the data on this cast. The lateral calculation procedure causes a significant inconvenience. In a previous paper by present author published in this journal (You, 2006), the mapping of neutral density surfaces with regularly gridded data such as Levitus data has been introduced. In this note, I present a new method to find the depth of a neutral density surface from a cast without having to specify an integration path in space. An appropriate reference point is required that is on the neutral density surface and thereafter the neutral density surface can be de- termined by using the CTD casts in any order. This method is only approximate and the likely errors can be estimated by plotting a scatter diagram of all the pressures and potential temperatures on the neutral density surfaces. The method assumes that the variations of potential temperature and pressure (with respect to the values at the reference point) on the neutral density surface are proportional. It is important to select the most appropriate reference point in order to approximately satisfy this assumption, and in practice this is found by inspecting the θ-p plot of data on the surface. This may require that the algorithm be used twice. When the straight lines on the θ-p plot, drawn from the reference point to other points on the neutral density surface, enclose an area that is external to the clus- ter of θ-p points of the neutral density surface, errors will occur, and these errors can be quantified from this diagram. Examples showing the use of the method are presented for each of the world’s main oceans.
