Ar-Ar Dating on the Metallogenesis of the Dongchuang Gold Deposit in the Xiaoqinling Area

The Dongchuang gold deposit in the Xiaoqinling area is an orogenic-type lodegold deposit. It is one of the few superlarge (>100 t Au) deposits in China. Although it has beenargued that it was formed in the Mesozoic, related isotopic age data have not been reported inprevious studies. Based on detailed geological study, the authors have carried out isotopic datingon various metallogenic generations. The ore-forming process of the Dongchuang gold deposit consistsof four stages: coarse-grained pyrite-bearing quartz veins (stage I), fine-grained pyrite-quartzveinlets (stage II), multi-sulfides (stage III) and carbonate-quartz veinlets (stage IV). Ar-Ardating on mineral separates of stages I, II and III yields plateau ages of 142.9 +- 2.9 Ma, 132.2 +-2.6 Ma and 128.3 +- 6.2 Ma, respectively. Sericite separates from stage II assemblage also yield anAr-Ar isochron age of 132.6 +- 2.7 Ma, similar to the Ar-Ar plateau age. These results suggest thatthe Dongchuang gold deposit was mainly formed during 143-128 Ma, coinciding with the authors'geological observations and previous hypothesis. This ore formation is coeval with theregional-tectonic transition from collisional compression to extension, strongly showing that thedecompression-geothermal increase regime during compression-to-extension transition is the mostconducive geodynamic environment to orogenic-type gold mineralization.

Fluid Inclusions of Orogenic Gold Deposits in the Zhongchuan Area,Western Qinling and Their Geological Significance

Orogenically-derived gold deposits of the Zhongchuan area in the western Qinling are distributed in the exo-contact thermal metamorphic zone. The country rocks hosting the deposits are predominantly of Devonian age with low-grade metamorphism and strong deformation with the ore deposits directly controlled by multi-level tectonic systems. Three types of inclusions from these deposits have been recognized: CO2-H2O, CO2-rich, and aqueous. The ore-forming fluids were mainly CO2-NaCl-H2O type characterized by rich CO2, low salinity, high temperature and immiscibility. Incorporated with earlier isotopic data, the regional geological setting and features of diagenesis and metallogeny, it can be concluded that the ore-forming fluids were derived from deep magma and mixed with meteoric and metamorphic water. The deposits formed during an intra-continent collisional orogeny, and some of the materials derived from the deep might have been involved in the ore-forming process.

Metallogenic Age of Dapinggou Gold Deposit in Northern Altun Area, Northwestern China

Studying the metallogenic age of Dapinggou gold deposit may provide important material not only for the study of metallization and the further prospecting of gold deposits but also for research into tectonic evolution in the Altun area. In this study, we used Rb-Sr isotopic dating method of fluid inclusion in the Au-bearing quartz, combining field investigation, REE, sulfur isotopes, lead isotopes, strontium isotopes and hydrogen-oxygen isotope, to determine the metallogenic age of the Dapinggou gold deposit. The only newly-discovered medium-sized gold deposit in the northern Altun area, Dapinggou gold deposit, is controlled by a ductile shear zone. It is characterized by mainly altered mylonite-types with a little K-feldspar quartz vein-types. Data from REE, sulfur isotopes, lead isotopes and strontium isotopes show that the source materials of the deposit were derived mainly from the metamorphic rocks. The data from the inclusion and hydrogen-oxygen isotope indicate that the ore-forming fluid came mainly from dynamic metamorphic water and partly from remelting magmatic water, with a little influence from meteoric water. The density of the ore-forming fluid is 0. 791 - 0. 971g/cm^3 and it contains 2.36 %-5.5 % salinity, The gold deposit was formed at 1.61-2.68 km below the surface at a temperature of 198--290 ℃ and a pressure of （420-700） × 10^5 Pa. The isotopic age from the Rb-Sr isochron of fluid inclusion in quartz is 487 Ma, which indicates that the mineralization occurred in the early Caledonian epoch. The study on the metallogenic age of Dapinggou gold deposit may provide important material not only for the study of metallization and the further prospecting of gold deposits but also for research into tectonic evolution in the Altun area.

The Palaeomagnetic Study of the MineralizationAge of Gold Deposits in the Xiong' ershan Area,Henan Province

Based on palaeomagnetic studies of the Precambrian gold deposits in the Xiong'ershan area, Henan Province, the authors infer that the ore-forming processes of the Beiling alteration-type gold ore deposit and the Dianfang breccia-type gold ore deposit started in the Proterozoic, and was superimposed by later mineralization, whereas the mineralization age of the Jiguanshan quartz- vein type gold ore deposit is Yanshanian.

Geochemical Tracing of Ore-forming Material Sources of Carlin-type Gold Deposits in the Yunnan-Guizhou-Guangxi Triangle Area --A Case Study of the Application of the Combined Silicon Isotopes Geochemistry and Siliceous Cathodoluminescence Analysis

Abstract This paper deals with characteristics of silicon isotope compositions and siliceous cathodoluminescence of host rocks, ores and hydrothermal silicified quartz of the Carlin-type ore deposits in the Yunnan-Guizhou-Guangxi triangle area. The study shows that primary silicified quartz is nonluminescent but quartz in host rocks and secondary silicified quartz are luminescent by the action of cathode rays. Correspondingly, silicon isotope compositions of host rocks, ores and hydro6thermal quartz veins are clearly distinguished. In strata from the Middle Triassic to the “Dachang” host bed, δ30Si of the host rocks ranges from 0.0% ?0.3%, while that of primary ore-forming silicified fluids from ?0.1% to ?0.4%; in the Upper Permian and Lower Carboniferous strata and Indosinian diabase host beds, δ30Si of the host rocks is from ?0.1% to ?0.2% and that of the primary silicified quartz veins from 0.3 % ?0.5 %. This pattern demonstrates the following geochemical mineralization process, primary ore-forming siliceous fluids migrated upwards quickly along the main passages of deep-seated faults from mantle to crust and entered secondary faults where gold deposits were eventually formed as a result of permeation and replacement of the siliceous ore-forming fluids into different ore-bearing strata. This gives important evidence for the fact that ore-forming fluids of this type of gold deposits were mainly derived from upper mantle differentiation and shows good prospects for deep gold deposits and geochemical background for large and superlarge gold deposits.

Migration and speciation transformation mechanisms of mercury in undercurrent zones of the Tongguan gold mining area, Shaanxi Loess Plateau and impact on the environment

In order to study the migration and transformation mechanism of Hg content and occurrence form in subsurface flow zone of gold mining area in Loess Plateau and its influence on water environment,the field in-situ infiltration test and laboratory test were carried out in three typical sections of river-side loess,alluvial and proluvial strata in Tongguan gold mining area of Shaanxi Province,and the following results were obtained:(1)The source of Hg in subsurface flow zone is mainly caused by mineral processing activities;(2)the subsurface flow zone in the study area is in alkaline environment,and the residual state,iron and manganese oxidation state,strong organic state and humic acid state of mercury in loess are equally divided in dry and oxidizing environment;mercury in river alluvial or diluvial strata is mainly concentrated in silt,tailings and clayey silt soil layer,and mercury has certain stability,and the form of mercury in loess is easier to transform than the other two media;(3)under the flooding condition,most of mercury is trapped in the silt layer in the undercurrent zone where the sand and silt layers alternate with each other and the river water and groundwater are disjointed,and the migration capacity of mercury is far less than that of loess layer and alluvial layer with close hydraulic connection;(4)infiltration at the flood level accelerates the migration of pollutants to the ground;(5)the soil in the undercurrent zone is overloaded and has seriously exceeded the standard.Although the groundwater monitoring results are safe this time,relevant enterprises or departments should continue to pay attention to improving the gold extraction process,especially vigorously rectify the small workshops for illegal gold extraction and the substandard discharge of the three wastes,and intensify efforts to solve the geological environmental problems of mines left over from history.At present,the occurrence form of mercury in the undercurrent zone is relatively stable,but the water and soil layers have been polluted.The risk of disjointed groundwater pollution can not be ignored while giving priority to the treatment of loess and river alluvial landform areas with close hydraulic links.The research results will provide a scientific basis for water conservancy departments to groundwater prevention and control in water-deficient areas of the Loess Plateau.

Lead Isotope Studies of Massive Surphur-Iron-Gold Deposits in the Tongling Area, Anhui Province

Pb isotope ratios and their variation have been measured and explained on ores of massive S-Fe-Au depos-its hosted in the Middle-Upper Carboniferous, on feldspars from diorite bodies closely related tomineralization and on whole rocks from ore-hosting strata (carbonate rocks) in the Tongling area, Anhui Prov-ince. Through a comparison of Pb isotope features of these geological bodies, it has been suggested that oresubstances of the deposits were derived from ore-hosting strata. In the meanwhile, the measurement of ore Pbisotopes of different mineralization types of the same deposit indicates that different mineralization types havedistinct Pb isotope characteristics, showing the potentiality of the Pb isotopic method used in mineral explora-tion.

Interpretation of remote sensing of geological structures and prediction of gold mineralization in Mohe area and its adjacent region

The authors took the ETM+ multi-spectra data as the data information and correlation coefficient for each band and carried out their information volume statistics.According to certain criteria,the authors also determined the optimum band-combined image.The image clarity is improved by various enhancements and fusions method.Based on remote sensing geological interpretation in detail,the relationship between remote sensing geological characters and gold mine were analyzed systemically.Using all kinds of remote sensing structure information,combining other research data,the authors determined mainly ore-controlling ore structure.Several prospective areas of gold ores were determined and furthermore significant finding mine target areas was confirmed.

Formation of the Micro-Disseminated Strata-bound Gold Deposits, With Special Reference to Structural Evolution, Miliang Area, Zhen'an County,Shaanxi Province, China

Based on detailed geologic study, the important role of structuring in the formation of gold deposits in the area is discussed with special reference to structural evolution. Syngenetic faulting contemporaneous with tectonic-volcanic events is thought to be responsible for providing the ore-forming material at depth. The lithofacies formed by highly alternating deposition of terrestrial and carbonate detritus is chemically characterized by the assemblage of Au-Sb-As,constituting a favorable source bed for the activation and enrichment of gold. This gold source bed has undergone four major stages of structural deformation, accompanied by multi-staged alteration and mineralization.

Gold Deposition by Boiling or Cooling Without Boiling: Genesis ofthe Sangchon Gold Deposits,Hadong Area, South Korea

In order to understand the mechanism(s) of gold precipitation in the anorthosite-hosted Sangchon gold deposits in the Hadong area, Korea, chemical speciation and reaction path calculations were accomplished by geochemical modeling. The modeling consisted of three-step procedures: reaction with anorthosite, then the simple cooling of the reacted fluid, and finally the boiling of metalliferous fluid. The principal vein minerals of the Sangchon deposits consist of quartz, sericite, kaolinite, pyrite, galena, chalcopyrite, sphalerite and acanthite. The sulfide mineralization is typically zoned from pyrite (preferentially at vein margins) to galena and sphalerite (toward vein center). Electrum is intimately associated with pyrite ± chalcopyrite and sphalerite. By comparing the results of modeling with the observed mineral assemblages and paragenesis, the most appropriate evolution path of ore fluids was suggested as follow: reaction of a single fluid with anorthosite at 300℃, then the isobaric cooling of the fluid at temperatures from 250° to 100℃, and then the boiling and cooling of the fluid due to the decrease of pressure and temperature. Calculations also show that all of the observed alteration minerals formed due to fluid-anorthosite interaction at early period, whereas most of sulfides and electrum were precipitated mainly due to cooling. The abundance of gold in veins depends critically on the ratio of total base metals plus iron to sulfide in the aqueous phase, because gold is transported as Au(HS) 2 -whose solubility is very sensitive to the sulfide activity. Our results of geochemical modeling generally fit to the observed mineral assemblages and mineral composition, indicating the usefulness of numerical simulation for elucidating the genesis of gold deposits.

Comparison of U-spatial Statistics Method with Classical Statistics Results in the Determination of Geochemical Anomalies of Epithermal Gold in Khoshnameh Area, Hashtjin, Iran

In this study,methods based on the distribution model(with and without personal opinion)were used for the separation of anomalous zones,which include two different methods of U-spatial statistics and mean plus values of standard deviation(X+nS).The primary purpose is to compare the results of these methods with each other.To increase the accuracy of comparison,regional geochemical data were used where occurrences and mineralization zones of epithermal gold have been introduced.The study area is part of the Hashtjin geological map,which is structurally part of the folded and thrust belt and part of the Alborz Tertiary magmatic complex.Samples were taken from secondary lithogeochemical environments.Au element data concerning epithermal gold reserves were used to investigate the efficacy of these two methods.In the U-spatial statistics method,and criteria were used to determine the threshold,and in the method,the element enrichment index of the region rock units was obtained with grouping these units.The anomalous areas were identified by,and criteria.Comparison of methods was made considering the position of discovered occurrences and the occurrences obtained from these methods,the flexibility of the methods in separating the anomalous zones,and the two-dimensional spatial correlation of the three elements As,Pb,and Ag with Au element.The ability of two methods to identify potential areas is acceptable.Among these methods,it seems the method with criteria has a high degree of flexibility in separating anomalous regions in the case of epithermal type gold deposits.

Research on the Application of Electromagnetic Method in the Exploration of Altered Rock-type Gold Deposits in the East Kunlun Metallogenic Belt

Introduction The East Kunlun Orogenic Belt is located in the northeastern part of the Qinghai–Tibet Plateau(Li et al.,2007),stretching from the East Kunlun to the Elashan area in an east–west direction(Guo et al.,2018).It is an important part of the Central Orogenic Belt(Xiong et al.,2023).It is considered one of the important gold mineralization regions in the Tethys tectonic domain(Norbu et al.,2023)and an essential potential base for mineral resources in China.Wulonggou and Gouli gold mines have been discovered successively,earning the reputation of the"Golden Belt of Qinghai Province"(Feng et al.,2004;He et al.,2023).

Ore-forming and Exploration Models of the Baguamiao Gold Deposit,Shaanxi Province

The Baguamiao superlarge gold deposit in Shaanxi Province is one of the typical cases in China that are hosted by sedimentary rocks. Explorers and researchers have discussed the gold mineralization enrichment conditions by studying sulphur, oxygen, carbon, silicon stable isotopes and mineralizing fluid features of the Baguamiao gold deposit and proposed a hydrothermal sedimentation-magmatic reconstructing gold mineralization model featuring multi-sources of ore-forming materials and multistage mineralizations. In addition, prospecting for “Baguamiao-type” gold deposits was started in the Fengtai Basin and a great number of important prospecting targets such as Tonglinggou, Simaoling, Guoansi and Dachaigou were discovered.

Structural geochemistry of gold mineralization in the Linglong-Jiaojia district, Shandong Province, China

The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.

Characteristics of Ore-Forming Fluids of Gold Deposits in Daqingshan District,Inner Mongolia,China

<Abstract>Locatedinthemid-westoflimerMongolia.Daqingshandistricthasmanygolddepositsoccurringalongaeast-weststrikingductileshearzonewithinagreelt,whichismainlycomposedoftheArcheanWulashangroup.Thehydrothermalmineralizationcanbedividedintofourstages:(1)pyrite-quartz,(2)quartz-Pyrite,(3)polymetallicsulfidesand(4)carbonates-quartz.Themajormetalylicmineralsintheoreofgold-bearingveinsarenativegold,electrum,pyrite,chalcopyriteandgalena,buttheganguemineralsaremainlyquartz,secondarilysericite,ankeriteandexcite.Prinipalalterationpatternsinthegolddepositsaresericithation,silicification,pyritizationcarbonatizationandchlorization.Aninvestigationonfluindinclusionsshowsthattheore-formingfluidswerelowinsalinitieandhighinCO2content,MeasuredδDoffluidinclusionsinquartzfromtheoreveinsrangesfrom-65‰to-104‰,butδ18Oquartzfrom10.0‰to12.8‰.Thesedatashowthatthewaterinhydrothermalfluidprecipitatingtheorebodiescouldhavebeenmainlymagmaticwaterandmetamorphicwaterbutlocalmeteoricwatermighttakepartinthelatemineralization.δ13Cfromfl

Measurement of Metallogenic Depth and Deep Second Enrichment Belt Forecasting in Jiaodong Gold Deposit

The depth is important for ore finding in Jiaodong gold deposit. However, many geologists are still discussing how to confirm the depth for the tectonic and metallogenesis formation. The authors of this paper propose a new method-the correction of metallogenic depth via its structure to calculate the depth. This method, based on the crust rock in a solid stress state, emphasizes the elastic pattern rather than the static fluid pattern. In addition, this method is more appropriate to the actual situation in the crust than the method of weight/special weight. The authors of this paper illustrating, with the Jiaodong gold deposit as an example, the metallogenic depth correction via structure conclude that the depth of the most deposits, lower than 4-6 km, is often 2.5 km. Therefore, the authors suggest that there exists a second enrichment belt and that ore resources are more potential at the belt of Jiaodong area. These results have been demonstrated by years of exploration.

Genesis and magma fertility of gold associated high-K granites:LA-ICP-MS zircon trace element and REEs constraint from Bakoshi–Gadanya granites in NW Nigeria

High-K granites dominate the rock units in the Bakoshi and Gadanya areas located in the northwestern Nigerian subshield,part of the Trans-Saharan Belt,West Africa.In this contribution,the LA-ICP-MS zircon trace element revealed the fertility of magma responsible for the high-K granites that hosts the Bakoshi–Gadanya gold mineralization.Two likely metallogenic granites types are 1)Gadanya alkali granite,with high Ce^(4+)/Ce^(3+)(mean 1485)and limited range of Eu anomalies may likely be associated with the gold mineralization,and 2)Bakoshi porphyritic granite,Jaulere biotite granite,Shanono coarsegrained granite,and Yettiti granite,all have low Ce^(4+)/Ce^(3+) ratios(mean\100,except second Bakoshi granite D2-1)with wider ranges of Eu/Eu^(*) values,thus are considered reduced granites.These reduced granites have oxygen fugacity values and Eu anomalies comparable to reduced granites associated with tin belts in Myanmar and Zaaiplaats granites in Bushveld Complex,South Africa.Ti-inZircon thermometric study revealed two thermal regimes during the crystallization of the Bakoshi–Gadanya granites:the high temperature(746–724℃):Shanono coarsegrained granite,Bakoshi granite D2-1,and Jaulere biotite granite;and relatively low temperature(705–653℃):Bakoshi porphyritic granite D1-1,Yettiti medium-grained granite,and Gadanya alkali granite.Zircon trace elements including U,Yb,Y,Nb,and Sc ratios constraint the magma source of Bakoshi–Gadanya granites to an enriched mantle metasomatized during the subduction process before its melting.Except for Gadanya alkali granite,fractionation of titanite and apatite dominate the magma evolution with limited amphibole fractionation.Melt that crystallized Gadanya alkali granite is rather saturated in zircon without accessory titanite or apatite.

2.5D Crustal Models Derived from Analytical Polynomial Separation Technique and Spectral Analysis of Gravity Data with Their Probable Gold Mineralization Migrations (Batouri, SE-Cameroon)

Geophysical surveying is crucial in the investigation of mineral resources in poorly exposed areas such as SE-Cameroon, a region known for its gold mineral potential. In this paper, gravity survey is carried out in the Batouri area, SE-Cameroon based on land gravity data from the Centre-south Cameroon. Therefore, an analytical polynomial separation program, based on least-square fitting of a third-degree polynomial surface to the Bouguer anomaly map, was used to separate the regional/residual components in gravity data. This technique permitted to better understand the disposition of the deep and near surface structures responsible of the observed anomalies in the Batouri area. Spectral analysis and 2.5D modelling of two profiles P1 (SW-NE) and P2 (N-S) selected from the residual anomaly map provided depths to basement. These depths constrain the gravity models along the profiles, indicating a variable thickness of the sedimentary infill with an approximate anomaly of -33 mGal. The 2.5D model of the basement shows a gravity body, with a signature suggesting two close and similar masses, which characterize the quartz-bearing formations associated here to granite and gneiss. Our work highlights a main heavy gravity: Gwé-Batouri anomaly, containing the major part of auriferous deposits located along the NE-SW direction. Further, three tectonic sub-basins bounded by normal faults have been highlighted at Guedal, Gwé, and Bélimban, in the south of Guedal-Bélimban depression. They are associated with the extension tectonics, more or less vertical tangential cuts and accidents that have affected the region. A correlation with previous results from tectonic, lithological and gold mineralization activities proves the relevance of the study and the need to intensify geophysical surveying in the area.

Research on Evaluation System of Green Residential Buildings in Cold Areas of Sichuan

With regard to the rapid growth of China’s building area and the increasing energy consumption of buildings, green buildings have become an important issue for balancing economic development and environmental impact. However, the current evaluation systems for various types of green buildings are often unable to achieve a set of standards in practice due to the distinct regional characteristics of each region. Therefore, in view of the regional characteristics of the climate, terrain, ecology, and economic development in the cold regions of Sichuan, it is important to study the evaluation system of green residential buildings suitable for the cold regions of Sichuan. This article focuses on the regional characteristics of climate, topography, ecology, and economic development in the cold regions of Sichuan, and discusses the limitations of the current standards on the practice of green building in cold regions of Sichuan through a sociological questionnaire survey on the comfort of living in the local population. Then from the two dimensions of the advantages of traditional houses and the particularity of national culture, the strategies for the optimization and improvement of the evaluation index system for green residential buildings in the cold regions of Sichuan were proposed. After comprehensively considering the factors that affect the green residential buildings, including the regional characteristics of the cold regions of Sichuan, and the green performance of buildings, local characteristics and ethnic features were included in the evaluation system. The evaluation index system of green residential buildings in the cold regions of Sichuan, consists of 92 three-level indicators. A professional hierarchical analysis software yaahp was used to establish a multi-level hierarchical model between the indicators, and the indicators were compared with each other layer by layer to clarify the importance of the indicators. Based on this, a judgment matrix for each layer was constructed and obtained. The weight of each indicator is accurate, and the scoring mechanism and grading standards are constructed according to it. Through the calculation, the consistency test of the entire model was passed, thereby confirming the scientificity and rationality of the entire evaluation system.

The Significance of Remote Sensing Technology in Gold Ore Exploration in Huma District, Heilongjiang Province, China

The methods of processing remote sensing image in forest area has been put forwa rd. With infrared waveband and organism geochemical remote sensing technology, w e extracted anomalous information related to gold ore in vegetated area and esta blished signs of interpreting remote sensing geological structures, Fur thermore, we have interpreted 4 sets of liner structure, more than 100 circular structures and a large circular block structure. Three evolutional stages of tec tonic stress fields have been divided. NE-NNE,NW and EW trending tructures cros s cut each other, comprising the basic structural pattern. Large circuar block str ucture with surrounding circular structure and the“corner area” of rhombus st ructure are usually the areas with gold mineralization.