NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray ph...NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray photoelectron spectroscopy(XPS). From the XPS data, it is concluded that the binding energy of Fe2p electrons is about 711 20～710 3 eV, the binding energy of Nd3d electrons is about 983 08～983 20 eV, and Fe in the product has two valence states (Fe 3+ and Fe 2+ ).展开更多
TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray ...TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray photoelectron spectrocopy studies provided that the Nls core-electron spectrum of TixAl1-xN thin film brodend with increasing Ti content, and the difference of the chemical shifts for Ti2p3/2 line between TiN and TixAl1-xN th77pj in film was 0.7 eV.展开更多
Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface a...Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface are subjected to phosphorus （P） diffusion by liquid dopant source （POCl3） at 870 ℃ to form P-N junctions with a depth of 300 nm. The X-ray photoelectron spectroscopy （XPS） is used to measure the Si 2p core levels of P-N junction wafer with nanopillar texture and planar surface. With a visible light excitation, the P-N junction produces a new electric potential for photoelectric characteristic, which causes the Si 2p core level to have a energy shift compared with the spectrum without the visible light. The energy shift of the Si 2p core level is -0.27 eV for the planar P-N junction and -0.18 eV for the nanopillar one. The difference in Si 2p energy shift is due to more space lattice defects and chemical bond breaks for nanopillar compared with the planar one.展开更多
This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a ...This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a 4B9B beam line at the Beijing Synchrotron Radiation Facility. The band gap of the pyrite agrees well with the optical band gap obtained by a spectrophotometer. The octahedral symmetry of pyrite leads to the splitting of the d orbit into t2g and eg levels. The high spin and low spin states were analysed through the difference of electron exchange interaction and the orbital crystal field. Only when the crystal field splitting is higher than 1.5 eV, the two weak peaks above the white lines can appear, and this was approved by experiments in the present work.展开更多
With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heter...With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heterojunction is fabricated on a c-Al2 O3 substrate by laser-molecular beam epitaxy,and the energy band alignment is determined by x-ray photoelectron spectroscopy.The valence band of ZnO is found to be 1.97 eV below that of Cu2O.A type-II band alignment exists at the Cu2O/ZnO heterojunction with a resulting conduction band offset of 0.77 eV,which is especially favorable for enhancing the efficiency of Cu2O/ZnO solar cells.展开更多
Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic p...Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic properties and microstructure of the films were studied. The apparent magnetic dead layer （MDL） is found to exist at the NiO/Fe interfaces of the MBE sample （about 2 ML MDL）, the PLD sample （about 3 ML MDL）, and the MS sample （about 4 ML MDL）. X-ray photoelectron spectroscopy indicates the presence of ionic Fe （Fe2＋ or Fe3＋） and metallic Ni at the NiO/Fe interfaces, which may be due to the chemical reactions between Fe and NiO layers. This also leads to the formation of MDL. The thickness of the MDL and the reaction products are related with the deposition energy of the atoms on the substrates. The interfacial reactions are effectively suppressed by inserting a thin Pt layer at the NiO/Fe interface.展开更多
The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectrosc...The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy（XPS） and the x-ray absorption near-edge structure（XANES） spectra of the interfacial structure of an s-triazine molecule adsorbed on Si（100） surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si（100） surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.展开更多
Spray pyrolysis method was used to deposit Lutetium Oxide (Lu<sub>2</sub>O<sub>3</sub>) thin films using lutetium (III) chloride as source material and water as oxidizer. Annealing was carried ...Spray pyrolysis method was used to deposit Lutetium Oxide (Lu<sub>2</sub>O<sub>3</sub>) thin films using lutetium (III) chloride as source material and water as oxidizer. Annealing was carried out in argon atmosphere at 450°C for 60 minutes of the films. To investigate the composition and stoichiometry of sprayed as-deposited and annealed Lu<sub>2</sub>O<sub>3</sub> thin films, depth profile studies using X-ray photoelectron spectroscopy (XPS) was done. Nearly stoichiometric was observed for both annealed and as-deposited films in inner and surface layers.展开更多
Ga<sub>2</sub>O<sub>3</sub> thin films were fabricated by spray pyrolysis method using gallium acetylacetonate as source material and water as oxidizer. The films were annealed at 450°C fo...Ga<sub>2</sub>O<sub>3</sub> thin films were fabricated by spray pyrolysis method using gallium acetylacetonate as source material and water as oxidizer. The films were annealed at 450°C for 60 minutes in argon atmosphere. X-ray photoelectron spectroscopy (XPS) depth profile studies were carried out to analyze the stoichiometry and composition of sprayed as-deposited and annealed Ga<sub>2</sub>O<sub>3</sub> thin films. Surface layers and the inner layers of as-deposited and annealed films were found nearly stoichiometric.展开更多
Electroless deposition has been used to deposit Ni-P films on glass slides using the reducing agent sodium hypophosphite. This has been done with a purpose to use Ni-P films as back contact for silicon carbide radiati...Electroless deposition has been used to deposit Ni-P films on glass slides using the reducing agent sodium hypophosphite. This has been done with a purpose to use Ni-P films as back contact for silicon carbide radiation detectors. By keeping deposition time, temperature, pH and concentration of the precursor solution constant, the film deposition has been done. XPS studies were done to analyze the composition and stoichiometry of Ni-P thin films.展开更多
The increased use of rechargeable batteries in portable electronic devices and the continuous develop-ment of novel applications （e.g. transportation and large scale energy storage）, have raised a strong de-mand for...The increased use of rechargeable batteries in portable electronic devices and the continuous develop-ment of novel applications （e.g. transportation and large scale energy storage）, have raised a strong de-mand for high performance batteries with increased energy density, cycle and calendar life, safety andlower costs. This triggers significant efforts to reveal the fundamental mechanism determining batteryperformance with the use of advanced analytical techniques. However, the inherently complex character-istics of battery systems make the mechanism analysis sophisticated and difficult. Synchrotron radiationis an advanced collimated light source with high intensity and tunable energies. It has particular ad-vantages in electronic structure and geometric structure （both the short-range and long-range structure）analysis of materials on different length and time scales. In the past decades, synchrotron X-ray tech-niques have been widely used to understand the fundamental mechanism and guide the technologicaloptimization of batteries. In particular, in situ and operando techniques with high spatial and temporalresolution, enable the nondestructive, real time dynamic investigation of the electrochemical reaction,and lead to significant deep insights into the battery operation mechanism. This review gives a brief introduction of the application of synchrotron X-ray techniques to the inves-tigation of battery systems. The five widely implicated techniques, including X-ray diffraction （XRD）, PairDistribution Function （PDF）, Hard and Soft X-ray absorption spectroscopy （XAS） and X-ray photoelectronspectroscopy （XPS） will be reviewed, with the emphasis on their in situ studies of battery systems during cycling.展开更多
文摘NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray photoelectron spectroscopy(XPS). From the XPS data, it is concluded that the binding energy of Fe2p electrons is about 711 20～710 3 eV, the binding energy of Nd3d electrons is about 983 08～983 20 eV, and Fe in the product has two valence states (Fe 3+ and Fe 2+ ).
基金This work was supported by the National Natural Science Foundation of China under grant No.10474074the Hubei Natural Science Foundation under grant No.2001ABB060.
文摘TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray photoelectron spectrocopy studies provided that the Nls core-electron spectrum of TixAl1-xN thin film brodend with increasing Ti content, and the difference of the chemical shifts for Ti2p3/2 line between TiN and TixAl1-xN th77pj in film was 0.7 eV.
基金supported by the National Natural Science Foundation of China(Grant No.50972144)
文摘Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface are subjected to phosphorus （P） diffusion by liquid dopant source （POCl3） at 870 ℃ to form P-N junctions with a depth of 300 nm. The X-ray photoelectron spectroscopy （XPS） is used to measure the Si 2p core levels of P-N junction wafer with nanopillar texture and planar surface. With a visible light excitation, the P-N junction produces a new electric potential for photoelectric characteristic, which causes the Si 2p core level to have a energy shift compared with the spectrum without the visible light. The energy shift of the Si 2p core level is -0.27 eV for the planar P-N junction and -0.18 eV for the nanopillar one. The difference in Si 2p energy shift is due to more space lattice defects and chemical bond breaks for nanopillar compared with the planar one.
基金Project supported by the National Natural Science Foundation of China (Grant No 102750770)
文摘This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a 4B9B beam line at the Beijing Synchrotron Radiation Facility. The band gap of the pyrite agrees well with the optical band gap obtained by a spectrophotometer. The octahedral symmetry of pyrite leads to the splitting of the d orbit into t2g and eg levels. The high spin and low spin states were analysed through the difference of electron exchange interaction and the orbital crystal field. Only when the crystal field splitting is higher than 1.5 eV, the two weak peaks above the white lines can appear, and this was approved by experiments in the present work.
基金Project supported by the National Natural Science Foundation of China(Grant No.11404302)the Laser Fusion Research Center Funds for Young Talents,China(Grant No.RCFPD1-2017-9)
文摘With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heterojunction is fabricated on a c-Al2 O3 substrate by laser-molecular beam epitaxy,and the energy band alignment is determined by x-ray photoelectron spectroscopy.The valence band of ZnO is found to be 1.97 eV below that of Cu2O.A type-II band alignment exists at the Cu2O/ZnO heterojunction with a resulting conduction band offset of 0.77 eV,which is especially favorable for enhancing the efficiency of Cu2O/ZnO solar cells.
基金supported by the National Natural Science Foundation of China (Nos.50871014, 50831002, 50971021, and 50901007)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality (No.PHR201007122)
文摘Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic properties and microstructure of the films were studied. The apparent magnetic dead layer （MDL） is found to exist at the NiO/Fe interfaces of the MBE sample （about 2 ML MDL）, the PLD sample （about 3 ML MDL）, and the MS sample （about 4 ML MDL）. X-ray photoelectron spectroscopy indicates the presence of ionic Fe （Fe2＋ or Fe3＋） and metallic Ni at the NiO/Fe interfaces, which may be due to the chemical reactions between Fe and NiO layers. This also leads to the formation of MDL. The thickness of the MDL and the reaction products are related with the deposition energy of the atoms on the substrates. The interfacial reactions are effectively suppressed by inserting a thin Pt layer at the NiO/Fe interface.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11874242,11804196,and 11804197)
文摘The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy（XPS） and the x-ray absorption near-edge structure（XANES） spectra of the interfacial structure of an s-triazine molecule adsorbed on Si（100） surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si（100） surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.
文摘Spray pyrolysis method was used to deposit Lutetium Oxide (Lu<sub>2</sub>O<sub>3</sub>) thin films using lutetium (III) chloride as source material and water as oxidizer. Annealing was carried out in argon atmosphere at 450°C for 60 minutes of the films. To investigate the composition and stoichiometry of sprayed as-deposited and annealed Lu<sub>2</sub>O<sub>3</sub> thin films, depth profile studies using X-ray photoelectron spectroscopy (XPS) was done. Nearly stoichiometric was observed for both annealed and as-deposited films in inner and surface layers.
文摘Ga<sub>2</sub>O<sub>3</sub> thin films were fabricated by spray pyrolysis method using gallium acetylacetonate as source material and water as oxidizer. The films were annealed at 450°C for 60 minutes in argon atmosphere. X-ray photoelectron spectroscopy (XPS) depth profile studies were carried out to analyze the stoichiometry and composition of sprayed as-deposited and annealed Ga<sub>2</sub>O<sub>3</sub> thin films. Surface layers and the inner layers of as-deposited and annealed films were found nearly stoichiometric.
文摘Electroless deposition has been used to deposit Ni-P films on glass slides using the reducing agent sodium hypophosphite. This has been done with a purpose to use Ni-P films as back contact for silicon carbide radiation detectors. By keeping deposition time, temperature, pH and concentration of the precursor solution constant, the film deposition has been done. XPS studies were done to analyze the composition and stoichiometry of Ni-P thin films.
基金the National Natural Science Foundation of China (Grant nos.21233004,21303147 and 21473148,etc.)the National Key Research and Development Program (Grant no.2016YFB0901500)
文摘The increased use of rechargeable batteries in portable electronic devices and the continuous develop-ment of novel applications （e.g. transportation and large scale energy storage）, have raised a strong de-mand for high performance batteries with increased energy density, cycle and calendar life, safety andlower costs. This triggers significant efforts to reveal the fundamental mechanism determining batteryperformance with the use of advanced analytical techniques. However, the inherently complex character-istics of battery systems make the mechanism analysis sophisticated and difficult. Synchrotron radiationis an advanced collimated light source with high intensity and tunable energies. It has particular ad-vantages in electronic structure and geometric structure （both the short-range and long-range structure）analysis of materials on different length and time scales. In the past decades, synchrotron X-ray tech-niques have been widely used to understand the fundamental mechanism and guide the technologicaloptimization of batteries. In particular, in situ and operando techniques with high spatial and temporalresolution, enable the nondestructive, real time dynamic investigation of the electrochemical reaction,and lead to significant deep insights into the battery operation mechanism. This review gives a brief introduction of the application of synchrotron X-ray techniques to the inves-tigation of battery systems. The five widely implicated techniques, including X-ray diffraction （XRD）, PairDistribution Function （PDF）, Hard and Soft X-ray absorption spectroscopy （XAS） and X-ray photoelectronspectroscopy （XPS） will be reviewed, with the emphasis on their in situ studies of battery systems during cycling.
