先进天基太阳天文台卫星(Advanced Space-based Solar Observatory,ASO-S)是中国科学院第2批空间科学先导专项之一,其主要目标是同时观测太阳磁场、耀斑和日冕物质抛射,并对3者之间的相互关系和内在联系进行研究.硬X射线成像仪(HXI)是A...先进天基太阳天文台卫星(Advanced Space-based Solar Observatory,ASO-S)是中国科学院第2批空间科学先导专项之一,其主要目标是同时观测太阳磁场、耀斑和日冕物质抛射,并对3者之间的相互关系和内在联系进行研究.硬X射线成像仪(HXI)是ASOS卫星的3大载荷之一,它通过对太阳活动发射的硬X射线进行傅里叶调制成像,实现高空间分辨率和高时间分辨率的太阳能谱成像观测.量能器单机是HXI的关键单机之一,其主要任务是精准测量通过每对光栅后太阳硬X射线的能量和通量.主要介绍了量能器单机的工作原理及其关键指标要求、标定设备及标定方案,最后给出了标定结果,从而验证了量能器单机方案设计的合理性.展开更多
By using PAO-10 as the base oil, the tribological behavior of 11 additives under high vacuum condition was evaluated. By adopting some surface analytical instruments, such as scanning electron microscopy(SEM), energy ...By using PAO-10 as the base oil, the tribological behavior of 11 additives under high vacuum condition was evaluated. By adopting some surface analytical instruments, such as scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS), the tribological mechanisms of these additives were studied. In air, O_2 can react with metal to form metal oxide that can protect the surfaces of rubbing pair during the tribological tests. According to the theory of the competitive adsorption, the function of some active elements is weakened. In a vacuum environment, the additives contributed more to the lubrication performance. The sulfur-containing additives could react with Fe to produce Fe Sx and "M—C" bonds("M" represents metal). They both had contributions to the lubrication. As for the phosphorus-containing additives, they only generated the phosphates during the tests. When the sulfur and phosphorus-containing additives were applied, the generated phosphates and Fe Sx had the primary contribution to the lubrication performance during the tests.展开更多
A new statistical fitting approach, named Statistical Distribution-Based Analytic （SDA） method, is proposed to fit single Gaussian-shaped Ka and KI3 X-ray peaks recorded by Si（PIN） and silicon drift detector （SDD...A new statistical fitting approach, named Statistical Distribution-Based Analytic （SDA） method, is proposed to fit single Gaussian-shaped Ka and KI3 X-ray peaks recorded by Si（PIN） and silicon drift detector （SDD）. In this method, we use the dis- crete distribution theory to calculate standard deviation of energy resolution a. The calibration of cr and energy （E） for two de- tectors between the energy ranges of 4.5-26 keV are also completed by measuring characteristic X-ray spectra of nineteen types of pure elements. With the spectrum fraction （SF） parameter proposed in this paper, the SDA method can be used to re- solve overlapping peaks. In measured spectra, the Gaussian part of X-ray peaks can be fitted by a Gaussian function with two parameters, ~ and SF. This new fitting approach is simpler than traditional methods and it achieves relatively good results when fitting the complex X-ray spectra of national standard alloy samples detected by Si（PIN） and SDD detectors. The 3（2 values are obtained for each spectrum to assess fitting results, and the SDA fitting method gives a preferable fit for the SDD detector.展开更多
文摘先进天基太阳天文台卫星(Advanced Space-based Solar Observatory,ASO-S)是中国科学院第2批空间科学先导专项之一,其主要目标是同时观测太阳磁场、耀斑和日冕物质抛射,并对3者之间的相互关系和内在联系进行研究.硬X射线成像仪(HXI)是ASOS卫星的3大载荷之一,它通过对太阳活动发射的硬X射线进行傅里叶调制成像,实现高空间分辨率和高时间分辨率的太阳能谱成像观测.量能器单机是HXI的关键单机之一,其主要任务是精准测量通过每对光栅后太阳硬X射线的能量和通量.主要介绍了量能器单机的工作原理及其关键指标要求、标定设备及标定方案,最后给出了标定结果,从而验证了量能器单机方案设计的合理性.
基金Financial support from the SINOPEC Research Program(No.ST13164-19]) is gratefully acknowledged
文摘By using PAO-10 as the base oil, the tribological behavior of 11 additives under high vacuum condition was evaluated. By adopting some surface analytical instruments, such as scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS), the tribological mechanisms of these additives were studied. In air, O_2 can react with metal to form metal oxide that can protect the surfaces of rubbing pair during the tribological tests. According to the theory of the competitive adsorption, the function of some active elements is weakened. In a vacuum environment, the additives contributed more to the lubrication performance. The sulfur-containing additives could react with Fe to produce Fe Sx and "M—C" bonds("M" represents metal). They both had contributions to the lubrication. As for the phosphorus-containing additives, they only generated the phosphates during the tests. When the sulfur and phosphorus-containing additives were applied, the generated phosphates and Fe Sx had the primary contribution to the lubrication performance during the tests.
基金supported by the National Natural Science Foundation of China(Grant Nos.40974065,41025015)the National High Technology Research and Development Program of China(Grant No.2012AA063501)Ph.D.Programs Foundation of Ministry of Education of China(Grant No.20125122110009)
文摘A new statistical fitting approach, named Statistical Distribution-Based Analytic （SDA） method, is proposed to fit single Gaussian-shaped Ka and KI3 X-ray peaks recorded by Si（PIN） and silicon drift detector （SDD）. In this method, we use the dis- crete distribution theory to calculate standard deviation of energy resolution a. The calibration of cr and energy （E） for two de- tectors between the energy ranges of 4.5-26 keV are also completed by measuring characteristic X-ray spectra of nineteen types of pure elements. With the spectrum fraction （SF） parameter proposed in this paper, the SDA method can be used to re- solve overlapping peaks. In measured spectra, the Gaussian part of X-ray peaks can be fitted by a Gaussian function with two parameters, ~ and SF. This new fitting approach is simpler than traditional methods and it achieves relatively good results when fitting the complex X-ray spectra of national standard alloy samples detected by Si（PIN） and SDD detectors. The 3（2 values are obtained for each spectrum to assess fitting results, and the SDA fitting method gives a preferable fit for the SDD detector.
